How to find the target host

Hi All,
I need to configure ADS for that I am following steps given in 'ADS configuration guide', according to 5.3.2 step 6 I need to enter the target host ( j2ee engine that runs adobe document services) and service no. I am not able to find it.
Can someone tell me how can we find the target host and service no.

Similar Messages

How to find the target system landscape

How to find the target system landscape - the clients present in the target system. Please explain in detail.
regards,
ravikiran

this FM is giving only the current system id. I want to find the target system details.

How to find the server hosting office communication ?

Hello
How to find the server hosting office communication ?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hello,
I have:
DG URL Internal;https://OCS.ad.xxxxxx.xxxx.xxx/GroupExpansion/Int/service.asmx;--;
DG URL External;;--;
Quality Metrics URI;;--;
URL Internal From Server;https://OCS.ad.xxxxxx.xxxx.xxx/Abs/Int/Handler;--;
URL External From Server;;--;
Voice mail URI;sip:[email protected];opaque=app:voicemail;--;
MRAS Server;;Not Configured;
GAL Status;https://OCS.ad.xxxxxx.xxxx.xxx/Abs/Int/Handler;--;
Controlled Phones;TRUE;--;
PC to PC AV Encryption;AV Encryption Enforced;--;
Focus Factory;sip:[email protected];gruu;opaque=app:conf:focusfactory;--;
Telephony Mode;Telephony Mode Disabled;--;
Line;;--;
Line Configured From;Auto Line Configuration;--;
Location Profile;;--;
Local Log Folder;C:\Users\me\tracing;;
MAPI Information;MAPI Status OK;MAPI Status OK;
Inside User Status;TRUE;;
Auto Update Download Started;--;--;
Auto Update Download Completed;--;--;
Last Auto Update Request;--;--;
Pairing State;Communicator cannot connect to your desk phone because the USB cable is not plugged in. Make sure that you connect the cable.;Enabled;
I see my email on the sip line but no server... what do I miss?
Is it by the URL?
Thanks,
Dom

How to find the physical Host Name from a short host name?

Hi,
I meet a problem that in RFC destination setting I see some people maintain the
short name in 'HOST NAME' field. But I need the long phiscial name.
For example, the short one 'bsw6107', the phisical name is 'bsw6107.wdf.sap.corp'. It there a table or FM to look for it?
Thank you.
Regards,
Yan

Hi,
Changing a host name on a central instance is a BIG thing, I personally would rather reinstall instead of changing a hostname...
What comes immediately to my mind is:
- SAP profiles
- .sapenv* .dbenv* scripts
- OPS$ users
- /etc/hostname*
- /etc/hosts
- TMS (/usr/sap/trans)
- Backup clients (and backup server changes if you use a central backup system)
- RFC destination of external systems
- SAP printers
- other external systems connecting to the server (Fax, Archiving etc.)
Regards,
Sankar

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

This functionality is not available in LabVIEW RT. If you attempt to switch execution target to an RT controller already targetted by someone else, it will tell you too many hosts are connected and fail. Of course if it allows you to switch, then no one was connected. By attempting to switch execution target you can use the message above to determine if anyone is targetted or not, but if someone is, there is no way to determine who.
If you are concerned about this sort of thing, you might check the RT target options in LabVIEW RT to change the IP access list for hosts that are allowed to switch execution target to it.

How to find the save jump targets?

Hi
I have created some jum targets through RSBBS. I am unable to find them in RSBBS. How to find the saved Jumptarget assignments for the particular quries...
Thanks,
Sudha.......

carefully follow the instructions in:
Query Transportation
Assign points if needed ***
Thanks,
Raj

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to make the TARGET of clone stamp 2 simultaneous layers?

Does anyone know how to make the TARGET of the clone stamp, multiple simultaneous layers? Or maybe more accurately, how to clone stamp the top layer and have the layer underneath doing the exact same cloning simultaneously. Or maybe a workaround? I've tried linking the layers, and multiple layer selection with no joy.
Here is what I'm trying to do. I'm duplicating a layer, then applying LucisArt to one of the layers to greatly exaggerate local contrast. Though I'm not using LucisArt as the final, I want to use it to assist in smoothing blotchy skies, banding, and finding hidden camera sensor dust spots.
I want to clone stamp on the LucisArt layer so I can watch my progress, but also have the underlying layer doing the exact clone stamping at the same time. Thanks ... Aaron

Thanks everyone.
Dennis, You are correct. I know how to selectively apply the LucisArt filter, that's not what I'm looking for. I want my end result to have NO LucisArt effect at all. I'm trying to use the LucisArt layer to drastically exaggerate flaws such as camera sensor dust, AND I want to correct these flaws on the LucisArt layer where they are obvious. The LucisArt layer is only for reference. But the trick is to get CS3 to do to the non LucisArt layer, exactly what I did to the LucisArt layer.
So imagine I have this otherwise nice photo, but the photographer (this happened) had an amazingly dirty sensor. Half of the dust spots I can hardly see, but the client wants it super clean. So I duplicate the layer so I have two exactly the same. I then apply a strong LucisArt filter the top layer which reveals all the spots including many I couldn't see on the original layer. I'd like to fix all these spots with the clone stamp tool on the LucisArt layer where I can see them easily, then toss that layer. The original below would have all those spots fixed, but sampled from it's own layer and stamped to it's own layer.
As it is, I can click the LucisArt layer on, place my finger on the spot, then turn that layer off and hopefully see the spot and remove it from the layer underneath. Very tedious indeed.
... Aaron

How to find the Infoobject name by Datasource .

Hi SAP Gurus
Can any of you guys suggest how to find the list of Info objects for the Datasources .
I have a scenario where I have a list of Datasources (400) which are Text and Attr Datasources,
for which I need find the list Info objects,
so can you please tell me is there any way that I can find the List of Info objects.
Thanks

Hi Rahul,
You can make use of RSOSFIELMAP for your requirement.
Go to Se16----->rsosfieldmap.
You can see several fields as selections among them you could find Info object and Field selections as well.
If you give infoobject name in selection, it will display all the data sources where it is available.
If you give Filed also it will display the same.
If you want to maintian document do Top Down Analysis from Bw stand right from Data target-->update rule--->infosource
Hope this helps
SujanR

How to find the Datasources for the given table names ?

Hi All,
I have an urgent requirement where I ned to find the names of BW Datasources, created for the given table names.
Both the tables and Datasources are in BW system only. I can see the table in SE11 but I am unable to find its associated Datasources in the 'Where Used List'.
Is there any method ?
Will assign points to satisfactory answers.
Regards,
Srinivas

Hi,
Check this thread on how to find the DS.
I have the field name, please help me find the data source.
Once you identify your DS you find which all Data targets are fed by trying to see the " Show data flow" in RSA1 for this data source.
Hope this helps.
Thanks,
JituK
Edited by: Jitu Krishna on Apr 30, 2008 11:52 AM

How to find the data flow in pipes

Hi All,
I am working on an existing created job which have the query that mapped to a input file from there it have a couple of Query transforms. After the second Query transform there are multiple Pipes with different query transform in which all of the querys are target to a error table and one pipe is target to a clean table.
I want to know how the data is flow into the clean table and error table. How to find the conditions saying which record needs to go into the clean table and which record needs to go into an error table.
Thanks

No such public document available from Oracle unless from Oracle Education.
for some specific operation you can check Process tab inside Oracle Application which shows the data flow as part for workflow process.
Regards
Prashant Pathak

How to find the unindexed attributes

Hi friends,
We migrated from 5.1sp3 to 5.1 sp4.
After migration i am facing the error unindex search error.
how to find the unindex attributes.

You can compare what is indexed against your complete list of all allowed attributes in your schema. Or cheat and use the console.
To generate a list of all indexed attributes, use ldapsearch:
ldapsearch -h <host> -p <port> -D "cn=Directory Manager" -w <password> -b "cn=index,cn=userRoot,cn=ldbm database,cn=plugins,cn=config" objectclass=*
Each common name (cn) returned is the name of an indexed attribute. Note this will also return the type of indexes defined, which is handy. You can save this to a text file for future reference.
You can dump your schema using the following search:
ldapsearch -h <host> -p <port> -b cn=schema objectclass=*
Look for "attributeTypes" entries. Note: there are a lot of system attributes.
You can also login to the Administration Console and under the Configuration tab, expand Data and then select your suffix. In the right hand pane, you will be taken to the Indexes tab by default, here all indexed attributes are listed. Those attributes not indexed can be viewed in a list by clicking the Add attribute... button at the bottom of the screen. You'll be presented with a list of all attributes not currently indexed.
Cheers,
sn3ak3rp1mp

How to find the database table behind the xtags varibles?

if in xtags we find that some varibles are not having the right data coming from xml -> database tables so how can we find out the names of database table behind it .

now how to find the database table and the column name of database table from which the value of id msds is coming
Here they have stored the name of pdf file . from this code pdf file is displayed

Hi,
Thanks for your response. It is PM related. When I run a T Code - IK18, the field Total Counter Reading field appears. I am looking for that particular fields actual table name and field name. I think I have found it in IMGR table. Now I want to get IMRG-READG in my report, but there is no common fields in neither MKPF or MSEG table. So what can I do to connect IMRG table with either of them ?

How to find the database growth rate?

Wanted to do the forecasting of disk growth for one year. How to find the database growth rate?
Rahul

This is code authored by Richard Ding that will log database sizes to a table. If you run it every day, then you can go back and compare the database size differences day to day... week to week... month to month... and year over year. That is
how I forecast growth over time.
Note: There is a database name required that is local to your environment, so change [YOURDATABASENAME] to whatever local database you wish to use. I will also post the DDL to create the target table. Create that table in the database you
name in the stored procedure code and all should run fine.
USE [master]
GO
/****** Object: StoredProcedure [dbo].[sp_SDS] Script Date: 04/22/2015 09:32:53 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[sp_SDS]
@TargetDatabase sysname = NULL, -- NULL: all dbs
@Level varchar(10) = 'Database', -- or "File"
@UpdateUsage bit = 0, -- default no update
@Unit char(2) = 'MB' -- Megabytes, Kilobytes or Gigabytes
AS
** author: Richard Ding
** date: 4/8/2008
** usage: list db size AND path w/o SUMmary
** test code: sp_SDS -- default behavior
** sp_SDS 'maAster'
** sp_SDS NULL, NULL, 0
** sp_SDS NULL, 'file', 1, 'GB'
** sp_SDS 'Test_snapshot', 'Database', 1
** sp_SDS 'Test', 'File', 0, 'kb'
** sp_SDS 'pfaids', 'Database', 0, 'gb'
** sp_SDS 'tempdb', NULL, 1, 'kb'
SET NOCOUNT ON;
IF @TargetDatabase IS NOT NULL AND DB_ID(@TargetDatabase) IS NULL
BEGIN
RAISERROR(15010, -1, -1, @TargetDatabase);
RETURN (-1)
END
IF OBJECT_ID('tempdb.dbo.##Tbl_CombinedInfo', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_CombinedInfo;
IF OBJECT_ID('tempdb.dbo.##Tbl_DbFileStats', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_DbFileStats;
IF OBJECT_ID('tempdb.dbo.##Tbl_ValidDbs', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_ValidDbs;
IF OBJECT_ID('tempdb.dbo.##Tbl_Logs', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_Logs;
CREATE TABLE dbo.##Tbl_CombinedInfo (
DatabaseName sysname NULL,
[type] VARCHAR(10) NULL,
LogicalName sysname NULL,
T dec(10, 2) NULL,
U dec(10, 2) NULL,
[U(%)] dec(5, 2) NULL,
F dec(10, 2) NULL,
[F(%)] dec(5, 2) NULL,
PhysicalName sysname NULL );
CREATE TABLE dbo.##Tbl_DbFileStats (
Id int identity,
DatabaseName sysname NULL,
FileId int NULL,
FileGroup int NULL,
TotalExtents bigint NULL,
UsedExtents bigint NULL,
Name sysname NULL,
FileName varchar(255) NULL );
CREATE TABLE dbo.##Tbl_ValidDbs (
Id int identity,
Dbname sysname NULL );
CREATE TABLE dbo.##Tbl_Logs (
DatabaseName sysname NULL,
LogSize dec (10, 2) NULL,
LogSpaceUsedPercent dec (5, 2) NULL,
Status int NULL );
DECLARE @Ver varchar(10),
@DatabaseName sysname,
@Ident_last int,
@String varchar(2000),
@BaseString varchar(2000);
SELECT @DatabaseName = '',
@Ident_last = 0,
@String = '',
@Ver = CASE WHEN @@VERSION LIKE '%9.0%' THEN 'SQL 2005'
WHEN @@VERSION LIKE '%8.0%' THEN 'SQL 2000'
WHEN @@VERSION LIKE '%10.0%' THEN 'SQL 2008'
WHEN @@VERSION LIKE '%11.0%' THEN 'SQL 2012'
WHEN @@VERSION LIKE '%12.0%' THEN 'SQL 2014'
END;
SELECT @BaseString =
' SELECT DB_NAME(), ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'CASE WHEN status & 0x40 = 0x40 THEN ''Log'' ELSE ''Data'' END'
ELSE ' CASE type WHEN 0 THEN ''Data'' WHEN 1 THEN ''Log'' WHEN 4 THEN ''Full-text'' ELSE ''reserved'' END' END +
', name, ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'filename' ELSE 'physical_name' END +
', size*8.0/1024.0 FROM ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'sysfiles' ELSE 'sys.database_files' END +
' WHERE '
+ CASE WHEN @Ver = 'SQL 2000' THEN ' HAS_DBACCESS(DB_NAME()) = 1' ELSE 'state_desc = ''ONLINE''' END + '';
SELECT @String = 'INSERT INTO dbo.##Tbl_ValidDbs SELECT name FROM ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'master.dbo.sysdatabases'
WHEN @Ver IN ('SQL 2005', 'SQL 2008', 'SQL 2012', 'SQL 2014') THEN 'master.sys.databases'
END + ' WHERE HAS_DBACCESS(name) = 1 ORDER BY name ASC';
EXEC (@String);
INSERT INTO dbo.##Tbl_Logs EXEC ('DBCC SQLPERF (LOGSPACE) WITH NO_INFOMSGS');
-- For data part
IF @TargetDatabase IS NOT NULL
BEGIN
SELECT @DatabaseName = @TargetDatabase;
IF @UpdateUsage <> 0 AND DATABASEPROPERTYEX (@DatabaseName,'Status') = 'ONLINE'
AND DATABASEPROPERTYEX (@DatabaseName, 'Updateability') <> 'READ_ONLY'
BEGIN
SELECT @String = 'USE [' + @DatabaseName + '] DBCC UPDATEUSAGE (0)';
PRINT '*** ' + @String + ' *** ';
EXEC (@String);
PRINT '';
END
SELECT @String = 'INSERT INTO dbo.##Tbl_CombinedInfo (DatabaseName, type, LogicalName, PhysicalName, T) ' + @BaseString;
INSERT INTO dbo.##Tbl_DbFileStats (FileId, FileGroup, TotalExtents, UsedExtents, Name, FileName)
EXEC ('USE [' + @DatabaseName + '] DBCC SHOWFILESTATS WITH NO_INFOMSGS');
EXEC ('USE [' + @DatabaseName + '] ' + @String);
UPDATE dbo.##Tbl_DbFileStats SET DatabaseName = @DatabaseName;
END
ELSE
BEGIN
WHILE 1 = 1
BEGIN
SELECT TOP 1 @DatabaseName = Dbname FROM dbo.##Tbl_ValidDbs WHERE Dbname > @DatabaseName ORDER BY Dbname ASC;
IF @@ROWCOUNT = 0
BREAK;
IF @UpdateUsage <> 0 AND DATABASEPROPERTYEX (@DatabaseName, 'Status') = 'ONLINE'
AND DATABASEPROPERTYEX (@DatabaseName, 'Updateability') <> 'READ_ONLY'
BEGIN
SELECT @String = 'DBCC UPDATEUSAGE (''' + @DatabaseName + ''') ';
PRINT '*** ' + @String + '*** ';
EXEC (@String);
PRINT '';
END
SELECT @Ident_last = ISNULL(MAX(Id), 0) FROM dbo.##Tbl_DbFileStats;
SELECT @String = 'INSERT INTO dbo.##Tbl_CombinedInfo (DatabaseName, type, LogicalName, PhysicalName, T) ' + @BaseString;
EXEC ('USE [' + @DatabaseName + '] ' + @String);
INSERT INTO dbo.##Tbl_DbFileStats (FileId, FileGroup, TotalExtents, UsedExtents, Name, FileName)
EXEC ('USE [' + @DatabaseName + '] DBCC SHOWFILESTATS WITH NO_INFOMSGS');
UPDATE dbo.##Tbl_DbFileStats SET DatabaseName = @DatabaseName WHERE Id BETWEEN @Ident_last + 1 AND @@IDENTITY;
END
END
-- set used size for data files, do not change total obtained from sys.database_files as it has for log files
UPDATE dbo.##Tbl_CombinedInfo
SET U = s.UsedExtents*8*8/1024.0
FROM dbo.##Tbl_CombinedInfo t JOIN dbo.##Tbl_DbFileStats s
ON t.LogicalName = s.Name AND s.DatabaseName = t.DatabaseName;
-- set used size and % values for log files:
UPDATE dbo.##Tbl_CombinedInfo
SET [U(%)] = LogSpaceUsedPercent,
U = T * LogSpaceUsedPercent/100.0
FROM dbo.##Tbl_CombinedInfo t JOIN dbo.##Tbl_Logs l
ON l.DatabaseName = t.DatabaseName
WHERE t.type = 'Log';
UPDATE dbo.##Tbl_CombinedInfo SET F = T - U, [U(%)] = U*100.0/T;
UPDATE dbo.##Tbl_CombinedInfo SET [F(%)] = F*100.0/T;
IF UPPER(ISNULL(@Level, 'DATABASE')) = 'FILE'
BEGIN
IF @Unit = 'KB'
UPDATE dbo.##Tbl_CombinedInfo
SET T = T * 1024, U = U * 1024, F = F * 1024;
IF @Unit = 'GB'
UPDATE dbo.##Tbl_CombinedInfo
SET T = T / 1024, U = U / 1024, F = F / 1024;
SELECT DatabaseName AS 'Database',
type AS 'Type',
LogicalName,
T AS 'Total',
U AS 'Used',
[U(%)] AS 'Used (%)',
F AS 'Free',
[F(%)] AS 'Free (%)',
PhysicalName
FROM dbo.##Tbl_CombinedInfo
WHERE DatabaseName LIKE ISNULL(@TargetDatabase, '%')
ORDER BY DatabaseName ASC, type ASC;
SELECT CASE WHEN @Unit = 'GB' THEN 'GB' WHEN @Unit = 'KB' THEN 'KB' ELSE 'MB' END AS 'SUM',
SUM (T) AS 'TOTAL', SUM (U) AS 'USED', SUM (F) AS 'FREE' FROM dbo.##Tbl_CombinedInfo;
END
IF UPPER(ISNULL(@Level, 'DATABASE')) = 'DATABASE'
BEGIN
DECLARE @Tbl_Final TABLE (
DatabaseName sysname NULL,
TOTAL dec (10, 2),
[=] char(1),
used dec (10, 2),
[used (%)] dec (5, 2),
[+] char(1),
free dec (10, 2),
[free (%)] dec (5, 2),
[==] char(2),
Data dec (10, 2),
Data_Used dec (10, 2),
[Data_Used (%)] dec (5, 2),
Data_Free dec (10, 2),
[Data_Free (%)] dec (5, 2),
[++] char(2),
Log dec (10, 2),
Log_Used dec (10, 2),
[Log_Used (%)] dec (5, 2),
Log_Free dec (10, 2),
[Log_Free (%)] dec (5, 2) );
INSERT INTO @Tbl_Final
SELECT x.DatabaseName,
x.Data + y.Log AS 'TOTAL',
'=' AS '=',
x.Data_Used + y.Log_Used AS 'U',
(x.Data_Used + y.Log_Used)*100.0 / (x.Data + y.Log) AS 'U(%)',
'+' AS '+',
x.Data_Free + y.Log_Free AS 'F',
(x.Data_Free + y.Log_Free)*100.0 / (x.Data + y.Log) AS 'F(%)',
'==' AS '==',
x.Data,
x.Data_Used,
x.Data_Used*100/x.Data AS 'D_U(%)',
x.Data_Free,
x.Data_Free*100/x.Data AS 'D_F(%)',
'++' AS '++',
y.Log,
y.Log_Used,
y.Log_Used*100/y.Log AS 'L_U(%)',
y.Log_Free,
y.Log_Free*100/y.Log AS 'L_F(%)'
FROM
( SELECT d.DatabaseName,
SUM(d.T) AS 'Data',
SUM(d.U) AS 'Data_Used',
SUM(d.F) AS 'Data_Free'
FROM dbo.##Tbl_CombinedInfo d WHERE d.type = 'Data' GROUP BY d.DatabaseName ) AS x
JOIN
( SELECT l.DatabaseName,
SUM(l.T) AS 'Log',
SUM(l.U) AS 'Log_Used',
SUM(l.F) AS 'Log_Free'
FROM dbo.##Tbl_CombinedInfo l WHERE l.type = 'Log' GROUP BY l.DatabaseName ) AS y
ON x.DatabaseName = y.DatabaseName;
IF @Unit = 'KB'
UPDATE @Tbl_Final SET TOTAL = TOTAL * 1024,
used = used * 1024,
free = free * 1024,
Data = Data * 1024,
Data_Used = Data_Used * 1024,
Data_Free = Data_Free * 1024,
Log = Log * 1024,
Log_Used = Log_Used * 1024,
Log_Free = Log_Free * 1024;
IF @Unit = 'GB'
UPDATE @Tbl_Final SET TOTAL = TOTAL / 1024,
used = used / 1024,
free = free / 1024,
Data = Data / 1024,
Data_Used = Data_Used / 1024,
Data_Free = Data_Free / 1024,
Log = Log / 1024,
Log_Used = Log_Used / 1024,
Log_Free = Log_Free / 1024;
DECLARE @GrantTotal dec(11, 2);
SELECT @GrantTotal = SUM(TOTAL) FROM @Tbl_Final;
INSERT INTO [YOURDATABASENAME].[dbo].[DBSize]
([Weight]
,[DBName]
,[Used]
,[Free]
,[Total]
,[Data]
,[Data_Used]
,[Log]
,[Log_Used]
,[DT])
SELECT
CONVERT(dec(10, 2), TOTAL*100.0/@GrantTotal) AS 'WEIGHT (%)',
DatabaseName AS 'DATABASE',
CONVERT(VARCHAR(12), used) AS 'USED',
CONVERT(VARCHAR(12), free) AS 'FREE',
TOTAL,
CONVERT(VARCHAR(12), Data) AS 'DATA',
CONVERT(VARCHAR(12), Data_Used) AS 'DATA_USED',
CONVERT(VARCHAR(12), Log) AS 'LOG',
CONVERT(VARCHAR(12), Log_Used) AS 'LOG_USED',
GETDATE()
FROM @Tbl_Final
WHERE DatabaseName LIKE ISNULL(@TargetDatabase, '%')
ORDER BY DatabaseName ASC;
IF @TargetDatabase IS NULL
SELECT CASE WHEN @Unit = 'GB' THEN 'GB' WHEN @Unit = 'KB' THEN 'KB' ELSE 'MB' END AS 'SUM',
SUM (used) AS 'USED',
SUM (free) AS 'FREE',
SUM (TOTAL) AS 'TOTAL',
SUM (Data) AS 'DATA',
SUM (Log) AS 'LOG'
FROM @Tbl_Final;
END
RETURN (0)
GO
USE [YOURDATABASENAME]
GO
/****** Object: Table [dbo].[DBSize] Script Date: 04/22/2015 09:49:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[DBSize](
[UID] [int] IDENTITY(1,1) NOT NULL,
[Weight] [decimal](18, 2) NULL,
[DBName] [varchar](250) NULL,
[Used] [decimal](18, 2) NULL,
[Free] [decimal](18, 2) NULL,
[Total] [decimal](18, 2) NULL,
[Data] [decimal](18, 2) NULL,
[Data_Used] [decimal](18, 2) NULL,
[Log] [decimal](18, 2) NULL,
[Log_Used] [decimal](18, 2) NULL,
[DT] [datetime] NULL,
CONSTRAINT [PK_DBSize] PRIMARY KEY CLUSTERED
[UID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO

How to find the target host

Similar Messages

Maybe you are looking for