How to find the user - role assignments in the database for EP6 SP9?

L.S.,
We have a quite specific requirement: to see which users have access to our portal environment (EP6 SP9). It does not immediately matter (though would probably still be nice to know if possible) which roles users have exactly.
I've been looking in the database to find user-to-role assignments there, but I'm unable to find any. The closest I got is the PID filed in the UME_STRINGS table, but users remain listed there even when all their portal roles are revoked afterwards. Any ideas?
Kind Regards,
Steven Dijkman

hi Steven,
     Sorry but you will have to write some code. the following lines of code will work for you.
IRoleSearchFilter rolefilter = UMFactory.getRoleFactory().getRoleSearchFilter();
          ISearchResult result = UMFactory.getRoleFactory().searchRoles(rolefilter);
          while (result.hasNext()) {
               String rolestr = (String) result.next();
               IRole r = UMFactory.getRoleFactory().getRole(rolestr);
               response.write(r.getDisplayName());
               response.write("<br>");
               Iterator users = r.getMembers(true);
               while (users.hasNext()){
                    String userstr = (String)users.next();
                    IUser user = UMFactory.getUserFactory().getUser(userstr);
                    response.write(user.getDisplayName());

Similar Messages

  • On the web how can I check the user role to display the form suitable for this role i

    Hello
    How can I check on the web the use role to display the a form for each role
    Example
    If the admin login I display admin_form.fmb and if user login I display
    user_form.fmb
    Thankx
    Tamer

    In my forms I hide tab pages according the role using something like the following script in the WHEN_NEW_FORM_INSTANCE trigger.
    So the user can not navigate to tabs which are vorbiden by his role.
    CURSOR users_roles_cur IS SELECT granted_role FROM user_role_privs
    WHERE username=(SELECT user FROM dual);
    user_roles_rec users_roles_cur%ROWTYPE;
    IF users_roles_cur%ISOPEN
    THEN
    CLOSE users_roles_cur;
    END IF;
    OPEN users_roles_cur;
    LOOP
    FETCH users_roles_cur INTO user_roles_rec;
    EXIT WHEN users_roles_cur%NOTFOUND;
    MESSAGE (user_roles_rec.granted_role);
    PAUSE;
    IF RTRIM(user_roles_rec.granted_role,' ') = 'BLA-BLA'
    THEN
    tb_pg_id := FIND_TAB_PAGE('activity');
    IF GET_TAB_PAGE_PROPERTY(tb_pg_id, visible) = 'FALSE' THEN
    SET_TAB_PAGE_PROPERTY(tb_pg_id, visible, property_true);
    END IF;
    END IF;
    END LOOP;
    CLOSE users_roles_cur;
    Other solution may be is to use an initial form which only will detect the user role and run the appropriate form.
    Other solutions are also possible.
    Joseph

  • How to find out users inapproprate access in the system

    Hi Experts,
    Please any on help me out how to find out the inappropriate critical/sensitive Access is granted to all end users.
    Regards,
    Reddy v.

    Hi Siddhesh,
    Thanks for your reply.
    I already used  the SUIM T-code, but unable to find out users, those who have critical / Sensitive authorization, could you please help me to find out the same by using SUIM,
    We will  able to get the critical / Sensitive authorization users details by executing RSUSR005.
    It display all Usres those who have critical / Sensitive authorization.
    But I want to know is thier any other way to find out the same.
    If any one help me to find out it will usefull for me for the security issue.
    Thanks
    Prakash

  • How check the user roles in Business Partner edition screen?

    Hello Masters,
    I'm having a little problem figuring out how to check the user roles to allow modification in some fields.
    At the 'Manage Organizational Data' screen ('Manage Business Partners' -> Business Partner Data -> edit). I need to check the user roles to let him change the 'Tax Numbers' values. The values can be changed only if the user is a administrator; otherwise it must only show the value.
    I checked the HTML Template and found where I can restrict this edition option, but the problem is that I don't know how to check the user roles here. Maybe there is a function to do this?
    Any ideas of how I can do it? Is there any magical BAdI to check this?
    Thanks in advance,
    José Omar

    Hi José Omar,
    there is no BADI for this...
    You have to change the standard code to display only tax data if the SY-UNAME does not have correct role.
    You can retrieve user roles with BAPI_USER_GET_DETAIL, or access directly the activity groups table.
    Rgds
    Christophe

  • How do I see the users/roles which have quota access to a Tablespace?

    How do I see the users/roles which have quota access to a Tablespace?
    Thanks

    Thank you very much.
    select username from dba_ts_quotas where tablespace_name='&tablespacename';
    did the job!
    regards

  • I used a terminal command to show the Library in the User folder, and now the Finder is behaving erractically.  Can anyone tell me how to reverse the show library terminal command?

    I used a terminal command in Lion to show the LIbrary in the Users folder, and now the Finder is behaving erratically, hanging up and becoming almost paralyzed.  Can anyone tell me how to reverse the terminal command for show Library.  The command I used was:
    chflags nohidden ~/Library/

    Showing the Library folder will not cause the problem you've described. Nevertheless:
    chflags hidden ~/Library
    will hide the folder. To reveal the folder:
    chflags nohidden ~/Library
    Note, there is no "/" after Library.

  • How to assign a Bex report to the user role

    Hi Expert
    in the Excel, when you open a query, the system will display history, faviourate, infoarea, role button on the left side of the popup screen. if you click the role button, you can see the user authorized Bex report. now I have created a Bex report and I want to assign it to the user role.
    how to do that?
    does anyboday know which transcation or setting can solve this problem?
    thank you in advance!

    Hi,
    You need to add the object S_RS_COMP:
    S_RS_COMP: Authorizations for using different components for the query definition. This authorization object is very important for reporting
    The authorization object S_RS_COMP restricts query component activities. For example, it restricts if someone can create queries, change queries, or execute queries. You can restrict query creation, change, and execution by the InfoArea and InfoCube. If your company has one InfoCube for sales information and another for financial data, you can restrict a user to only those queries written for the sales InfoCube or the financial InfoCube.
    You could also use S_RS_COMP if you want to protect by query name. For example, you have an InfoCube for sales data. Every sales manager needs access to this InfoCube. However, sales managers in different lines of business are not allowed to execute the same query.
    Please visit:
    http://www.*********************/bw_security/bw_security_auth_obj_2.htm
    to know more about BW Objects.
    Hope it helps.
    Please award points if it is useful.
    Thanks & Regards,
    Santosh

  • How to find the user who have restarted the schedular.

    Hi,
    We are using the cron trigger schedular to initiate the BPEL process.
    We use the oc4jadmin user to login into the em console of SOA.
    Somebody has restarted the schedular on production server which we can see in the log file.
    But is there any way to find that who is the exact user who has restarted it. I know the user has login with the oc4jadmin but can we check who the machine user(machine profile of that user).
    Becasue if we know that this was the machine user who has login into the EM console we can find it.
    Please help.l
    Thanks

    Hi,
    If the user has used the manage option to delete the contents of the DSO then the changed by field will be updated by the users name. In case a program is used for the deletion then it wont be the case.
    Regards
    Govind.

  • How to find the users who has done the manual blockings in F110?

    I would like to knw the users who has blocked the inoice in F110 and even who has re-allocated the payment method/bank details in F110

    Hi,
    You can open the TC F110. Give the run dates and identification numbers then go to menubar systems- status.
    Which user has been blocked the invoice displayed.
    I hope it will help to you.
    Thanks,
    Venkat

  • How to implement Oracle user/role security with Access front end?

    Hi,
    We have successfully migrated our Access database tables to Oracle 10g using SQL developer. We've recreated all the users and roles(i.e., access groups) in Oracle and granted rights to tables.
    In the Access front end database, in the Database window we have saved linked Oracle tables which replaced the Access tables. The forms, reports, queries run fine with the linked Oracle tables. All the linked table use one ODBC DSN to the Oracle database with the same Oracle user id.
    We need to be able to authenticate users into the Oracle database and RE-link the tables based on their own unique user id. By during so we can allow users to use the Oracle standard user id/role and system privileges to control select, update, ect. rights to the database.
    I've been able to use the VB code within Access to logon into the database with a unique id, but I have not been able to find out how to RE-link the tables to the unique user id using VB. There should be some way to relink tables dynamically, based on users login into the Access front end.
    I don't know a great deal about Access projects, but I do know with SQL server allows login into your Access project and link tables dynamically.
    Can someone give me some assistance or point me in the right direction?
    Thanks in advance,
    Larry

    We had one of our programmers here come up with a VB code solution for re-linking table within Access. However the relinking takes 3-4 minutes for 100+ tables.
    In an effort to help you understand the situation better, I will attempt to elaborate on the problem:
    We have an Access 2003 application which currently has a front end using Access(forms, reports, queries, & VB code) and a MS Access 2003 backend.
    We have migrated the backend tables to Oracle. However, we still have a need to maintain the front end in Access, since we have over 60 forms, 40 reports, 200+ queries in Access. Its easy to understand, we have a significant investment in the front end(Obviously, the plan is to migrate the front end also at some future date).
    In order to utilized the existing front end, we have to validate and modify the current front end connections to the new Oracle backend. One of the features of Access is that you can "link" tables and save the link for runtime. Each Access table can have its own link which is a separate ODBC/JET connection. As such, each separate link has its own userid/database information.
    The other issue with using the Access front-end is that Access utilizes a workgroup file to implement user and group security. The workgroup file contains all the users and which groups the users belong to in Access. Then within Access, you allow users access to object(tables, queries, ect) by their userid and or group. When users open an Access database with Access security enabled, they are required to log into Access. The login is authenticated by the workgroup file. Once, logged into Access, users have rights to Access objects based on their rights granted to their userid and groups they belong. The problem here is that when you remove the linked Access tables and replace them with linked Oracle tables, Access has knowledge about Oracle table rights granted to users; nor would you expect it to.
    The dilema is the disconnect between Access and the fact Oracle utilizes a similar but much more sophisticated security model. It creates users and roles(which are similar to Access groups), and again this is independent of Access security.
    Our solution was to still use the Access workgroup file security along with the Oracle security model. By using the Access userid and then creating a similar Oracle userid with similar table rights granted in Access, you could apply security within Access and also with the Oracle database.
    For example, a user BOB logs into Access via the workgroup file, using VB code, Access then establishes a Oracle connection logining into Oracle using the same unique userid BOB into Oracle.
    After connecting and validating user BOB into Oracle, then the Access tables are relinked to Oracle using the user BOB userid and table rights.
    This Oracle userid has been granted table rights specific for this userid.This allows the user BOB to use the Access application and still be authenticated into the Oracle database.
    The problem with this solution is that the relinking of the saved Access tables takes 3-7 minutes for about 100+ tables. This is not acceptable for users each time they log into the application.
    Our current alternative is to use one Oracle userid to login each user, and use Access form restrictions/security to allow/prevent users from updating/viewing data. Obviously, this is not the optimal solution in respect to security, but it at least allows us to control access to the data(via the forms) by using one logon required for each user, and quick startup time for the application.
    I understand SQL server does a better job in integration, but we use Oracle which is what I am trying to work with.
    Larry

  • How to find out web-inf path from the physical drive?

    How to find out web-inf path from the physical drive?
    I have some user profiles in web-inf directory.SO I want to know the path from root directory like
    d:/program files/allaire/jrun/appname/web-inf/profiles/username like that.
    Presently I am able to get the path upto the application directory and from that I am concatinationg web-inf/profiles/username .
    But it is giving problems when it is deployed under unix or linux.Because web-inf there it treats as WEB_INF
    SO I want to get the path of web-inf directory with out hard coding.
    Thanku

    String path = application.getRealPath("/WEB-INF/profiles/username");
    Note sure why you need this, but you don't need the real path to read the file - you can get an InputStream using the relative path. See ServletContext getResource() and getResourceAsStream().

  • How to find out user exit

    Hi All,
    How to find out User Exit in particular program.
    I mean if you have one profile, how to find is there any user exits in that program.
    Appreciate if any body tel answer.
    Thanks & Regards,
    Subbu

    You could try searching the main program for "userexit_"
    This would give you a list of all the available user exits within the application.
    For Customer exits, you could search SMOD with a short description ex: order in the F4 help. Another way is to search for CUSTOMER-FUNCTION in the main program. You can then navigate to the enhancement in the customer function and use the Z Program in the enhancement.
    http://www.easymarketplace.de/userexit.php - has a complete list.
    More specifically, in case you're looking for SD exits - http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm.

  • How to find out user exits of t-code va03

    hi all
       how to find out user exits of any t-code .
    regards
    deepak

    Hi Deepak,
    <b>Try this code.</b>
    *& Report  Z_USEREXIT                                                  *
    REPORT  Z_USEREXIT
    NO STANDARD PAGE HEADING.
    *&  Enter the transaction code that you want to search through in order
    *&  to find which Standard SAP User Exits exists.
    *& Tables
    TABLES : tstc,     "SAP Transaction Codes
             tadir,    "Directory of Repository Objects
             modsapt,  "SAP Enhancements - Short Texts
             modact,   "Modifications
             trdir,    "System table TRDIR
             tfdir,    "Function Module
             enlfdir,  "Additional Attributes for Function Modules
             tstct.    "Transaction Code Texts
    *& Variables
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    *& Selection Screen Parameters
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    *& Start of main program
    START-OF-SELECTION.
    Validate Transaction Code
      SELECT SINGLE * FROM tstc
        WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
           WHERE pgmid    = 'R3TR'
             AND object   = 'PROG'
             AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
             WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
              WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
              WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
              WHERE pgmid    = 'R3TR'
                AND object   = 'FUGR'
                AND obj_name = enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
    Find SAP Modifactions
        SELECT * FROM tadir
          INTO TABLE jtab
          WHERE pgmid    = 'R3TR'
            AND object   = 'SMOD'
            AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
          WHERE sprsl EQ sy-langu
            AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(95) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
          WRITE:/(95) sy-uline.
          LOOP AT jtab.
            SELECT SINGLE * FROM modsapt
            WHERE sprsl = sy-langu AND
            name = jtab-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
            WRITE:/1 sy-vline,
            2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
          ENDLOOP.
          WRITE:/(95) sy-uline.
          DESCRIBE TABLE jtab.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No of Exits:' , sy-tfill.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(95) 'No User Exit exists'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'Transaction Code Does Not Exist'.
      ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    <b>plz reward points if helpful or if it solves ur query.</b>
    Thanks
    Chinmay

  • How to find a user who created message in satelite system ?

    hi all,
    Does anybody know how to find a user who created message in satelite system, but when there is no business partner created for him in Solman ? In tx crm_dno_monitro, crmd_order or dnotifwl  there isn`t any information. Is there any Tx or something where i can check it ?
    Regards,
    M.

    Hi,
    BP should ne maintained for the user in satellite system as a identification in solman system.
    how you are trying to create a message in satellite system..
    if you are using help-> create support message then, you can get the message log details on the table BCOS_PROT.
    please update us
    Thanks,
    Jansi
    Edited by: shivjansi on Jan 25, 2012 7:44 PM

  • How to find out if your Mac has the new Virus ?

    How to find out if your Mac has the new Virus, and how to fix it ???

    Helpful Links Regarding Flashback Trojan
    A link to a great User Tip about the trojan: Flashback Trojan User Tip
    A related link in the tip to a checker: Malware Checker Dowload Link
    A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started.
    For now I recommend the User Tip from etressoft to detect and remove:
    Checking for and removing the "Flashback" trojan
    Kaspersky Flashback Trojan Site:Flashback Trojan Detection and Removal
    Also see Apple's article About Flashback malware.

Maybe you are looking for

  • Link creation in Acrobat - viewing on ipad

    Hi All As posted above im having problems with a pdf and links on an ipad. I have a 10 page pdf that I have created in indesign ( this doesnt have any interactivity set, just standard pdf output) I then set links using the link tool native in Acrobat

  • Add text to specified index in multicolumn listbox

    Hi! I have smal problem with multicolumn listbox. My application should create list of values where user can increase and decrease values of 1 or more tester at same time. e.g when user gives for tester 1 values 1 - 5, my vi creates list where values

  • Possible to transfer Quicktime Pro from one Mac to another?

    Hello -- I have Quicktime Pro on my PowerMac G5, but I would like to transfer the license/registration to my new MacPro, if possible. Is this possible? Has anyone done this? Thank you very much. Nick

  • PDF not faithful to source document

    Using Create PDF Online I can no longer exactly replicate the source MS/Word document as a pdf. Every conversion option including the default 'Screen' results in a readable (OCR) document that paginates differently from the original. No good for lega

  • How do I close Mozilla Firefox in order to instal an update of Adobe Flash Player?

    I installed FF very recently at the recommendation of Blue Mountain.com as I was unable to send their e-cards with messages. Now I'm trying to update Adobe Flash Player and cannot do so because of the message 'close Moxilla Firefox to continue'. I've