How to fix/control Purchase Order value as per delegation of powers?
Can you please let me know the config steps required to fix a certain amount in a purchase order ( I mean to say one designated General Manager Purchase has got delegation of powers to issue purchase order for an amount of Rs. 10 lacs only). Is it possible in MM or in FI to fix that amount of Rs.10 Lacs while creating Purchase Order Kindly provide config steps in detail if available in MM or in FI?
Three levels of release procedures have been configured in our company from purchase officer to finance and from there to the next higher level but not included any value/amount validation is included. Is there any other option other than release procedure since I think meddling with the release procedure which is already working fine does not sound proper by our MM guys.
Similar Messages
-
How to deal with purchase order purchased with sale order
Hi,
I know we can produce with sale order, and the finished products can be priced in their own sale order and line item even when the finished product master data is set 'S' in its price control field. But how to deal with purchase order purchased with sale order if its price control is 'S' and the purchased material can be priced differently with its own sale order?
thanks.Hi,
That is to say, we want to get these results:
1. material purchased must match its sale order and its item
2. the purchased material is valued by sale order and its item when it is put into the stock.
3. the purchased material is set "valued by standard price' in its material master data.
How to practice?
Thanks. -
How to Close Service Purchase Orders
Dear All,
Please guide me how to close Service Purchase order if the part services are pending and Net value is not completed or no service entry done.
But still we need to close the purchase order.
Is there any manual provision in Service Entry Sheet or Purchase order ?
Please help.
Shailesh PanchalHi,
Activate Delivery Complete Indicator on Service Purchase Orders through configuration.
SPRO-Materials Management-Purchasing-Purchase Order-Define Screen Layout at Document Level-PT9F-Define Screen Layout at Document Level-Optional
Now check all the service purchase orders for which you want to close.
Hope this will help you.
BR,
Patil -
Dear All
How to Restrict the Field of Purchase order value we want to restrict it for X value sothat check will be there for Not more then that PO made by Any one.
Second Thing how we can put in Material master that whenever we r putting PO qty then it will check stk and then confirm that stk is there , no PO is required.
Rgds
Pankaj Agarwal1. You can use the standard SAP functionality of release strategy, where you can maintain your maximum PO value. If PO is created for the value higher than this, it will be stopped for output & has to be released or has to be cancelled.
2. For second point also, you can use SAPu2019s standard functionality of PTO (Purchase to stock) , Here you can use MRP type u2018VBu2019 for the material, maintain lot size, safety stock, reorder level quantity. So that whenever you will run the MRP, system will generate requirements. -
Purchase Order value rounded to a single number
How is the Purchase Order value rounded to a single number ?
Ex: Example - 100.51 to be rounded to 101 OR
100.49 to be rounded to 100
It is required at PO - Price conditions . (Item details----material net price )
(and also in PO output screen which can be done with the help of developer)
regards,
ckHi,
Go to
SPRO - > MM -> Purchasing -> Define price detmination process -> define condition types -> go for define condition type -> select any condition type -> go to details -> inside it you will see the Rounding rule -> choose 'A'
Save your enteries...and check..
Hope it helps..
Regards,
Priyanka.P
AWARD IF HELPFULL -
Coding to calculate net purchase order value against the contract?.
Hi ,
Please help.
Can any one send me the coding to calculate net purchase order value against the contract?.
ThanksI got the below coding and information from SDN, would you please help me to fix this coding
infomation from SDN
For the above requirment I have coded a program in Endroutine but it is not populating cummulative Order value against Contract.
DATA:
WA_ty_t_TG_1 TYPE tys_TG_1.
data: netsum type char15.
types:begin of ty_net,
netsum type /BI0/OINET_PO_VAL,
V_EBELN TYPE /BI0/OIOI_EBELN,
end of ty_net.
data:t_net type standard table of ty_net .
data:wa_net type ty_net.
SORT RESULT_PACKAGE BY CONTRACT.
loop at RESULT_PACKAGE INTO WA_ty_t_TG_1.
WA_NET-V_EBELN = <RESULT_FIELDS>-CONTRACT.
AT END OF CONTRACT.
netsum = WA_ty_t_TG_1-NET_PO_VAL + NETSUM.
ENDAT.
WA_NET-netsum = NETSUM.
APPEND WA_NET TO T_NET.
CLEAR:T_NET,NETSUM.
ENDLOOP.
loop at RESULT_PACKAGE assigning <RESULT_FIELDS> .
READ TABLE T_NET INTO WA_NET WITH KEY
V_EBELN = <RESULT_FIELDS>-CONTRACT
<RESULT_FIELDS>-/BIC/YNET_VAL = NETSUM.
CLEAR: WA_NET-NETSUM.
endloop.
<RESULT_FIELDS>-/BIC/YNET_VAL = netsum.
CLEAR:NETSUM,<RESULT_FIELDS>-/BIC/YNET_VAL.
ENDLOOP.
I have coded above one..let me know what mistake I have done.in the bolded loop I have given INTO instead of Assigning, because I need all records which assigns to WorkArea, but while executing DTP its leading to shortdump.if I replace Assigning statement,its working fine. but zero values in output( I think wrong in logic part)
Let me know the brief coding part if I am wrongly coded. -
How can I send purchase order through SAP mail ?
How can I send purchase order through SAP mail ? Can any one explain whts the NACE settings?
just do it as <b>Anji reddy</b> said to you ...or else ... in the purchase order trascation ...print it ... so that it will generate the spool request for that purchase order ....
so the the belwo program is for sending <b>the Spool Request data as Email to any Email id ...</b>
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note for the below program to process a spool request the program must be executed in background otherwise no spool request will be created. Once you have had a look at this there is an modified version of the program which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Girish -
BBP_PPF - Output Control Purchase Order
Dear Experts,
We use SRM Server 5.50
Is anyone knows how can we control the UI of transaction 'Output Control Purchase Order' (BBP_PPF)?
Thanks & Regards,
KerenKeren,
sorry I misunderstood your requirement.
The ways of controlling user screens is one of 3.
1. Screen Variants - you say you have already tried this
2. Use a BADI to hide fields or control user defined fields, if one is available?
3. Modify the template - extreme solution that will create future issues during upgrade but sometimes is the only way.
As I am a functional person you would need to contact your ABAP/technical support for the details.
Hope this helps
Allen. -
Purchase Order values are not reflecting in MIGO
Dear Experts,
I have changed standared Pricing Procedure from TAXINN to TAXINT because excise calculation was wrong. Now I have assinged new pricing procedure & reflecting in Purchase order & working as per requirement also.But when we are doing MIGO, excise values are not automatically coming in MIGO. So Is there any configuration or missing copy control because i have changed pricing procedure?
Also I want to put a check, if purchase order value is not matching with vendor invoice value then stores person can't do the MIGO.
Could any body guide me?
Thanks
TruptiHi,
It is not like that you have to mandatory use the TAXINN rather it is recommended by SAP to use but if some business requirement doesnu2019t meet up with what is recommended that its business call to go TAXINJ from TAXINN, but right now we don't know at what circumstances they moved to TAXINJ but question is what are the settings missing while moving from TAXINN to TAXINJ and because of that system is not picking the Tax Values at the time of MIGO in excise capture & posting.
So I have several questions in mind in order to understand your system behaviour.
1) Are you using the correct Tax code at PO level?
2) If using the correct Tax code then is't correct value maintained in FTXP for the Tax code used in PO.
3) If correct Value maintained in Tax code then by clicking on Taxes button mentioned under PO item level details are you able to see the correct value against each applicable condition type in next screen by clicking over Taxes button in PO?
4) if not then first check J1id - Material Chapter Id combination, vendor excise indicator mentioned, correct duties maintained in excise duty so check all master data related to CIN maintained in J1id
So first give answer to above mentioned questions then we procees further but I am sure I can make your system to picked the correct duties don't worry Just answer my questions hope things become fine in your system.
Best Regards,
Silky
Note: Please assign valuable points in order to encourage contributors to each answer to queries... -
KEY FIGURE: Effective purchase order value & K.F "No. of Purch.Orders"
Yo my fellow Gurus,
Got a problem, when executing listcube on the Info-Cube 0PUR_C01 - I see the data/amounts in the column for "Effective purchase order value" / 0ORDER_VAL. But when running the query with the Key Figure I just get "0"
I tried the option of adding the Process Keys not allocated in the Routine list of keys, yet still nothing has popped in the query, and heres the routine after additonal keys added:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
INCLUDE RS_BCT_MM_UPDATE_RULES.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS2LIS_02_SCL
RECORD_NO LIKE SY-TABIX
RECORD_ALL LIKE SY-TABIX
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BI0/V0PUR_C04T-ORDER_VAL
RETURNCODE LIKE SY-SUBRC
ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
IF ( COMM_STRUCTURE-PROCESSKEY = '001' or "Bestellung
COMM_STRUCTURE-PROCESSKEY = '011' or
*change of keys
COMM_STRUCTURE-PROCESSKEY = '015' or
COMM_STRUCTURE-PROCESSKEY = '005' or
COMM_STRUCTURE-PROCESSKEY = '025' or
COMM_STRUCTURE-PROCESSKEY = '041' or
COMM_STRUCTURE-PROCESSKEY = '051' or
COMM_STRUCTURE-PROCESSKEY = '061' or
*change of keys
COMM_STRUCTURE-PROCESSKEY = '021' or
COMM_STRUCTURE-PROCESSKEY = '004' or "LP
COMM_STRUCTURE-PROCESSKEY = '014' or
COMM_STRUCTURE-PROCESSKEY = '024' )
AND COMM_STRUCTURE-BWAPPLNM EQ 'MM'
AND COMM_STRUCTURE-ORDER_VAL <> 0.
perFORM LOC_CURR_CONVERT
USING COMM_STRUCTURE-ORDER_VAL
COMM_STRUCTURE-DOC_DATE
COMM_STRUCTURE-ORDER_CURR
COMM_STRUCTURE-LOC_CURRCY
COMM_STRUCTURE-EXCHG_RATE
CHANGING RESULT.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
else.
RETURNCODE = 4.
endif.
if abort is not equal zero, the update process will be canceled
This seems to be also the issue with my other Key Figure "No. of Purch. Orders" except here it the just comes up blank / 0 . This is to some the number of pos per plant for the month. So it's not storing anything but running via an interface and then with the aid of the routine loading the count into the cube:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS2LIS_02_HDR
RECORD_NO LIKE SY-TABIX
RECORD_ALL LIKE SY-TABIX
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BI0/V0PUR_C04T-NO_PUR_ORD
RETURNCODE LIKE SY-SUBRC
ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
if COMM_STRUCTURE-HDRPROCESS = '01' "Bestellung
AND COMM_STRUCTURE-no_hdr <> 0.
result value of the routine
RESULT = COMM_STRUCTURE-no_hdr.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
else.
RETURNCODE = 4.
endif.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
Please advise the way forward.
Thanks,
Ishaamwhat do u want?
-
How to get the Purchase order Qty in the object dependency
Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
SriniHi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ). -
I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?
In landscape mode, the mailbox list is automatically displayed (in portrait mode, you will need to tap the button to,show it).
To edit the list, tap edit as shown below. -
How do I control the order of all day events in iCal?
How do I control the order of all day events in iCal? Even if I painstakingly try to
re-order the events the way I want them, when they print, they are in a different order.
I have searched other forums and no one seems to have an answer to this. Has
anyone found the solution? Thanks!I also have this issue, where the events in iCal change when viewing in print preview or printing. I even notice they will switch if I try to print again??!!! I am using different calendars to show different colours. and they are setup on iCloud not on my mac.
it is becomign frustrating when I print 2 months worth and ssome events are correct in order and alas some will change when I print again!
Can anyone help please?
thanks -
Requirement Standard SAP Report on Total Purchase Order Value
Dear Friends,
Could u please suggest is there any standard SAP report. Requirement has given belwo.
I required if we have account assignment Category A as one of inputs, we will get the reqd output " Total Purcchase order value."
Note 1) Total Purchase Order Value means - Basic price + taxes + Charges (Freight + Other charges - Discounts etc)
Note 2) My requirement standard SAP report only.
Thanks and regrds,
Vijay Kumar TVNHi,
T code : ME80FN
Select :Edit->Dynamic selections>Purchasing document item> Acct. assignment cat.>select A(f4)->execute
select Material no., PO Number in program selections
Hope it shall resolve your query....
regards
rahul -
How to view the purchase order output
Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A
Maybe you are looking for
-
How to get the number of page by creating OLE microsoft word document
Hihi Experts, I have generated a word document using ole in sap abap report. May i know which command can i use to call the word object to get the number of page before closing the word document? eg. call method of wordobj 'insertpagefield' ? and i n
-
So, my ipod will not stay on, when I take it off the charger it just goes dead. I cannot plug it into the computer and have it go on; I guess it doesn't have enough power for the battery. But, just the other day, I unplugged my ipod (went dead) plugg
-
File Content Conversion -All the input content was not shown in output file
Hi Experts, In my scenario, I need to send data from .XML file to .txt file, using File Content Conversion at Receiver communication channel. This is File to File scenario. This is my Input xml file. <ns:FILEINPUT_MT xmlns:ns="http://File2FileTest">
-
Cannot move my former .wma files to itunes for mac
Over the years, I ripped all of my cds and stored them on my PC. Because I was using a PC, I ripped this music in .WMA format. When I got my macbook, I was EXTREMELY disappointed that I couldn't just transfer these files into itunes. So I did some
-
Gentlemen, I am working on an SAP BI implementation project. We have FI-CO,PP,PM,QM,MM AND SD. We are finished with everything. But while checking reports in Production server,I have found few columns(infoobjects) with incorrect data. Like fir Bill Q