How to fix partition table by use fdisk

i installed vista with my os x.
each time i boot into my vista the system shows "partition tablr not recognized" and then load some loaders from vista.
there's also a message showing that " use windows fdisk" to fix the problem.
i'm not good at computer. so please guide me step by step to solve the problem.
thanks in advance.
joh

You should probably purchase a legitimate retail version of Windows Vista. The error comes from the BIOS emulation hack that bypasses the Vista activation function.
It should eventually boot, however. After which, you can open the command shell, and type:
*bootrec.exe /fixmbr*
*bootrec.exe /fixboot*
... which ought to make the message go away (and Vista boot faster).

Similar Messages

How's this partition table for my server?

How's this partition table for my server? Web/DNS/DHCP/Mail Server.
hdd1: ~8gb total
/boot - 100mb
swap - 1gb
/ - rest of drive
hdd2: ~155gb total
/var - whole drive
This is a Compaq ProLiant 5500 server with 10 drives. Will most things be installed inside /var or what?

Zetsumei wrote:Web/DNS/DHCP/Mail Server.
Web = /srv
DNS = /var
DHCP = /var
Mail = Depends which package you use. I use postfix and told it to use /srv
I would half your swap, reduce /var and put the extra space into /srv
Also create a separate /tmp and /home to prevent accidental or deliberate DoS attacks by filling your / partition
Here's what I use on my Web / DNS / FTP server:
Filesystem Size Used Avail Use% Mounted on
/dev/xvda 493M 176M 317M 36% /
/dev/xvdc 31M 674K 29M 3% /boot
/dev/lvmData-home 62M 26M 34M 44% /home
/dev/lvmData-usr 2.0G 848M 1.1G 45% /usr
/dev/lvmData-tmp 496M 20M 451M 5% /tmp
/dev/lvmData-srv 1.5G 769M 667M 54% /srv
/dev/lvmData-var 496M 231M 241M 49% /var
/dev/lvmData-pacman 384M 303M 82M 79% /var/cache/pacman
/dev/lvmData-backup 5.5G 4.6G 565M 90% /mnt/backup

How to create a table to use in webdynpro ABAP

Hi Guys,
Can anybody let me know how to create a table to use in webdynpro ABAP. I am new to ABAP. It would appreciable if i get useful answer. Thanks In Advance
Regards
Ravi

Hi! You can use transaction code SE11. Please refer to http://help.sap.com/saphelp_nw70/helpdata/en/6c/f2934259a5c66ae10000000a155106/frameset.htm
Please note that table name should start with 'Y' or 'Z' - by SAP naming conventions object names starting with 'Y' and 'Z' are reserved for customer application development.
Please reward points if helpful

How to get pivot table by using dates

Hi,
How to get pivot table by using dates in column.
Below is the sample table and its value is given.
create table sample1
Order_DATE       DATE,
order_CODE       NUMBER,
Order_COUNT   NUMBER
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,232);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,935);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,43);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,5713);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,11346);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,368);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,1380);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,133);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,7109);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,14336);
select * from sample1;So how to get the data like below.
          order_date
order_code 30-sep-12 29-sep-12
1 232 368
2 935 1380
3 43 133
4 5713 7109
5 11345 14336

Using the extra data I inserted in my previous reply:select ORDER_CODE,
SUM(DECODE(extract (month from ORDER_DATE),1,ORDER_COUNT,0)) JAN,
SUM(DECODE(extract (month from ORDER_DATE),2,ORDER_COUNT,0)) FEB,
SUM(DECODE(extract (month from ORDER_DATE),3,ORDER_COUNT,0)) MAR,
SUM(DECODE(extract (month from ORDER_DATE),4,ORDER_COUNT,0)) APR,
SUM(DECODE(extract (month from ORDER_DATE),5,ORDER_COUNT,0)) MAY,
SUM(DECODE(extract (month from ORDER_DATE),6,ORDER_COUNT,0)) JUN,
SUM(DECODE(extract (month from ORDER_DATE),7,ORDER_COUNT,0)) JUL,
SUM(DECODE(extract (month from ORDER_DATE),8,ORDER_COUNT,0)) AUG,
SUM(DECODE(extract (month from ORDER_DATE),9,ORDER_COUNT,0)) SEP,
SUM(DECODE(extract (month from ORDER_DATE),10,ORDER_COUNT,0)) OCT,
SUM(DECODE(extract (month from ORDER_DATE),11,ORDER_COUNT,0)) NOV,
SUM(DECODE(extract (month from ORDER_DATE),12,ORDER_COUNT,0)) DEC
from SAMPLE1
where trunc(order_date, 'YY') = trunc(sysdate, 'YY')
group by order_code
order by order_code;
ORDER_CODE JAN FEB MAR APR MAY JUN JUL AUG   SEP   OCT NOV DEC
         1   0   0   0   0   0   0   0   0   600   600   0   0
         2   0   0   0   0   0   0   0   0 2315 2315   0   0
         3   0   0   0   0   0   0   0   0   176   176   0   0
         4   0   0   0   0   0   0   0   0 12822 12822   0   0
         5   0   0   0   0   0   0   0   0 25682 25682   0   0Now a bit of explanation.
1) Whenever you pivot rows to columns, no matter what version of Oracle and no matter what method you use, you have to decide in advance how many columns you are going to have and what the names of the columns are. This is a requirement of the SQL standard.
2) I use the WHERE clause to get just the data for this year
3) With EXTRACT, I get just the month without the year.
4) Using DECODE, I put every month's data into the correct column
5) Once I do all that, I can just GROUP BY order_code while SUMming all the data for each month.

How to hide system tables when using the Oracle SQL Developer?

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet

Note:304522.1 How to Move Queue Tables without using export import

Trying to use the pkg available in Metalink "Note:304522.1 How to Move Queue Tables without using export import"
Using the 10.1.0.x and upwards Package, I'm getting the following error on a single consumer queue table with an xmltype payload:
SQL> exec move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK');
BEGIN move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK'); END;
ERROR at line 1:
ORA-20000: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SYS.MOVE_AQT", line 652
ORA-06512: at line 1
We've tried in multiple environments, always with the same results.
Trace file shows:
*** 2006-11-08 10:06:47.154
*** SERVICE NAME:(SYS$USERS) 2006-11-08 10:06:47.147
*** SESSION ID:(379.954) 2006-11-08 10:06:47.147
qtable move procedure starting execution at 08-11-2006 10:06:47 for queue table XFORM_TEST_INT.INTERFACE_XML_QUEUE
qtable move procedure experienced an exception at 08-11-2006 10:06:47
qtable move error message ORA-06502: PL/SQL: numeric or value error
qtable move procedure ended execution at 08-11-2006 10:06:47
Can anyone help with this? Has anyone used this before successfully (or not successfully). We urgently need this working today to test moving our queue table into a tablespace with a smaller block size for performance reasons in production.
Thanks for the help!
Tony

Thank you,
Yes we've done that. They've confirmed a problem with the links/scripts on the note. The 10.1 and up version was not really 10.1 and up.
As they would not have a new version available in time for the move we needed to perform, we switched our approach to using dbms_redefinition instead.
Thanks for the reply,
Tony

How to display smartforms table lines useing different background colour

Hi all:
How to display smartforms table lines useing different background colour .
for example:
line1:green
line2:red
line3:green
line4:red
line5:green
line6:red
line7:green
line8:red
Any help is highly appreciated!!
启明星

Hi,
Create a two lines one for header and second for data in the table.
1)In table painter we can find the pencil mark.
2)select the pencil mark
3)now select the line which you need to shade
4) now select the shading colour in the table painter and the provide the resolution up to 100% and select table pattrn for that line.
5) Now you can use this for the header now only the header gets shaded and the remaining gets unshaded.
reward points if useful
Thanks and Regards,
Nishant

Should I partition the disks using fdisk (300 GB lun) for ASM?

We've configured oracle 11g and asm on SLES10sp2 systems prior to the one I'm working on now. We use disks that are luns from SAN storage. The SAN devices vary (Tier 1 and tier 2). In earlier installs, we did not need to partition the disks using fdisk (luns up to 40GB in size). We did need to write a label using fdisk and 'w'. The asm that is being configured now is using 300 GB luns (on sles10 sp2 oracle 11g). I've needed to create a new primary partition using fdisk and then have asm 'look' as the partitioned device. If I did not do that, ASM would not look at the unpartitioned device.
The database in now built and it seems to be working ok.
Does this config sound ok?
Thanks,
Eleanor

I think this is right. I also always had to partition disks and let asm use the partitions because for some reason it did not accept the full device.
Bjoern

How to import partitioned tables in different tablespace

Hi everyone,
I try to import the partitioned tables in different tablespace.
Consider the following situation:
I have a dump file which is created by using "Export" utility. Some data are in partitioned tables, some of them are in non-partitioned tables. Also, all tables are located in "MYTBS" tablesapce. I try to import all data from this dump file to another database. I didn't get error messages when importing the data from non-partitioned tables. However, I got error message when importing the data from partitioned tables. The error message is: tablespace 'MYTBS' does not exist.
I just want to how I can solve this problem other than create 'MYTBS' tablespace for my new database.
Thanks in advance.
Angel

Hi,
I got the following error message:
IMP-00017: following statement failed with ORACLE error 959:
"CREATE TABLE "FACILITYCONNECTION",....., "CONNECTIONTYPE" "
"NUMBER(1, 0) NOT NULL ENABLE) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 25"
"5 PARALLEL ( DEGREE DEFAULT INSTANCES 1) NOLOGGING STORAGE( PCTINCREASE 0) "
"TABLESPACE "MYTBS" PARTITION BY RANGE ("CONNECTIONTYPE" ) (PARTITION "
""EXT" VALUES LESS THAN (1) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 S"
"TORAGE(INITIAL 65536) TABLESPACE "MYTBS" NOLOGGING, PARTITION "FAC" VA"
"LUES LESS THAN (2) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(I"
"NITIAL 65536) TABLESPACE "MYTBS" NOLOGGING )"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'MYTBS' does not exist
Thanks.
Angel

How to fix skewed table columns and rows after re-import XML

My question is regarding XML Import in InDesign CS3.
I have a XML that has a table of 5 columns and 5 rows, when I import it into InDesign, the table shows up fine with 5 columns and 5 rows. However when I revise my table to have an additional column, and re-import the XML file, the table gets updated, but instead of with an additional column, it gets 'appended' with an additional row instead (InDesign seems to blindly replace each cell from left to right, top to bottom, and ends up with 6 rows instead). The XML file specifies the number of columns and rows (5 and 5 before, 5 and 6 after), why doesn't InDesign recognize it and automatically add a new column when I re-import the file? Is this problem fixed in CS5.5? Is there a script to fix this?
Here is an example of my old XML vs new XML:
Old:
<frame5>
<Table xmlns:aid="http://ns.adobe.com/AdobeInDesign/4.0/" aid:table="table" aid:trows="5" aid:tcols="5">
<Cell aid:table="cell" aid:crows="1" aid:ccols="1"></Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2006</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2005</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2004</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2003</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores at beginning of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">678</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores opened during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">36</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">50</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">59</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">79</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores closed during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">13</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">9</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">7</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">4</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Total stores at end of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">869</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
</Table>
</frame5>
New:
<frame5>
<Table xmlns:aid="http://ns.adobe.com/AdobeInDesign/4.0/"
xmlns:aid5="http://ns.adobe.com/AdobeInDesign/5.0/" aid:table="table" aid:trows="5" aid:tcols="6">
<Cell aid:table="cell" aid:crows="1" aid:ccols="1"></Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2007</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2006</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2005</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2004</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">2003</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores at beginning of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">123</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">678</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores opened during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">456</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">36</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">50</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">59</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">79</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Stores closed during the period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">789</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">13</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">9</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">7</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">4</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">Total stores at end of period</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">1368</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">869</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">846</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">805</Cell>
<Cell aid:table="cell" aid:crows="1" aid:ccols="1">753</Cell>
</Table>
</frame5>

What I mean is, right now there is a "workaround" which requires a user to manually add an extra column before re-importing the XML (with an extra column), otherwise the results get skewed. If by providing a script we can simply ask the user to "run" it, it would be a more "acceptable" solution.
Right. So, one solution would be to use Convert Text to Tables. If you find that works for you, then you can script it.
That's why I asked you...
Of course if nothing is required from the user other than simply re-importing, then that would be the best solution.
Well, one could imagine a script that was attached to the re-import command, or to the link update notification, but probably the first step is to get something that works reasonably well without automating it completely. Especially because triggers to run scripts silently can introduce hard-to-debug problems.
Sure we can switch to use "CALS table and see if this works. The question is, why should we need to? In the 2nd XML there is clearly a different "aid:tcols" value, and yet InDesign seems to ignore it and assume the same # of columns? This sounds like an Indesign bug, can someone confirm? Is there any plans to fix this?
Not to be snarky, but do you want it to work or not? There are the tools you have and the tools you wish you had, and you can't really do much with the ones you wish you had. I'm kind of assuming you are looking for a solution today, not a solution in 2013.
Yes, I believe two of us have confirmed this appears to be a bug.
Plans to fix? Well, we can't really tell you. You could try asking Adobe, but that's not easy information to get out. But you can certainly open a support case at http://adobe.com/go/supportportal and ask. It's not like we have special information here...
But you're probably better off filing a bug first, in that same fashion.
But let's assume no one had filed the bug. CS6 is expected in the March/April 2012 timeframe. That means that they're probably just putting the finishing touches on it right now, and it's going to be very difficult to fix things in it now. So then the earliest you'd likely get it fixed in CS6.5/CS7/whatever which presumably comes out by 2Q2013, and that's assuming Adobe decides to fix it...
I also can't find much documentation on how to update my table to a "CALS table", any examples?
Try this thread:
Re: Importing a CALS table into InDesign CS3

How to rebuild partition table

Hi, everyone
Two months ago I broke my partition table by trying to install windows 8. I had it repaired with "test-disk" , but the problem is that gparted now sees my disk as a whole 300Gb unpartitioned space, fdisk however recognizes the partition table. I was wondering what will happen if I press 'w' in fdisk will this format the partitions and erase everything, or will it just try to do something similar to what test-disk did? I want to do this because now I have a 50 gig partition left for windows and I want to add this to my / partition. Before the problems I used to do this kind of operations with gparted.
Thanks

ewaller wrote:Kind of like tearing up the map.
That's why you zerox of the map (dd ... bs=440 count=1 or at least fdisk -l /dev/... >somefile) before you rip it up. The latter is all I needed to save my butt when I borked a PT. As long as you use your head, there is no reason dicking with the partition table particularly warrants a full data backup.
That said, you can bet your @$$ I'd backup even "reaquirable" data in this situation, unless doing so was more trouble than reaquiring it would be. "An ounce of prevention" and such. Unique data, fugeddaboudit. I have at least three copies of stuff I can't replace and don't want to lose.
Last edited by alphaniner (2012-05-16 18:20:32)

How to dd Partition Table through First Partition

Hi; I have a flash drive which has a single NTFS partition that fills up less space than the whole drive (so there's a bunch of empty/unused space at the end of the drive). I'd like to use dd to make an image from the very beginning of the drive (to catch the partition table) through the end of the NTFS partition, ignoring the empty space after it. I tried the commands below but they didn't seem to work (a copy of the drive had partition table issues):
dd count=1 bs=512 if=/dev/sdb of=partition_table.img
dd bs=8M if=/dev/sdb1 of=sdb1.img
cat sdb1.img >> partition_table.img
rm sdb1.img
mv partition_table.img mydrive.img
Any ideas? Am I failing to capture something between the partition table and the first partition? Or is it possible my partition table is not 512 bytes?

My suggestion is to dd the MBR (dd if=/dev/XXX of=<image file> bs=512 count=1) and use ntfsclone or fsarchiver to make the image.
But if you want to use dd for the whole image:
$ fdisk -l /dev/sda
Disk /dev/sda: 251.1 GB, 251059544064 bytes, 490350672 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x4d9ddc04
Device Boot Start End Blocks Id System
/dev/sda1 2048 2099199 1048576 83 Linux
/dev/sda2 * 2099200 2303999 102400 83 Linux
/dev/sda3 2304000 490350671 244023336 8e Linux LVM
To image everything through the first partition, I would (dd if=/dev/sda of=image bs=512 count=2099200). I stop at 1+ the end of the partition, because the first sector is 0, rather than 1. You can also modify the bs for better performance, but you'll have to modify the count accordingly. For a 1M bs I think you divide the count by 2048 (FYI, this is completely unrelated to the fact that the partition starts on sector 2048). But I would suggest you do the math yourself.

X200 Boot Configuration Corrupt !! How do I partition table repair ........help please

Hopefully someone can help me as I'm about to go mad......
My x200 says that my Boot configuration is corrupt and that to repair it I have do a 'partition table repair' error code 0x490
I have tried to use the recovery cd's but each time they try and restore to factory original settings it says becuase there had been a previous attemp to restore which was stopped early the Boot Configuration isn't complete and I dont have enough room on the partition swload c: to carryon - again its saying to increase the size of the partition swload c: but I don't know how !!!!!!!
I've looked in the BIOS setup but cant see anything in there about partitions......
Can anybody help please :-((
Message Edited by Christian333 on 01-18-2009 06:06 AM

Christian333, welcome to the forum,
I personally have never heard of your problem, others may have, but I would start by running Drive Fitness Test from Hitachi to check the hard drive. Even if you don't have an Hitachi drive it will say whether or not the drive is OK. I always run it from CD.
If the drive is OK I would then run Secure Data Disposal at it's lowest level in order to eliminate anything in the boot sectors and then afterwards the recovery discs. If problems are then experienced it's time to call service.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

How to know a table is using in any packeges or procedures

Dear All
How can I know that a table is using in any packege or procedure or function ?
I mean , let say I have 10 Packages , 10 Procedures and 5 Functions .
I need to know in which Packages , Procedures or Functions are using the table EMP .
How can I search ? Is there any command or I need to open all the procedures and then search one by one ?

Hi everyone,
Did anyone interest in the topic search for dependencies between objects in the database?
I want to see the PL/SQL code which is an appeal to a particular procedure or function or package and where and how does an object use in any PL/SQL code.
Often do you have a need to get answers to these questions?
I say about an object usage presentation, not about its relations only.
Do you want to know, how opbject used?
If it's a table - what's DML?(insert/select/...)
If it used in a package - which procedure of package uses in?
The object usage in an external objects - Oracle*Forms/Reports,Flat/Word files, Informatica.
I'll want to know, if everybody interested to one.

Total number of records of partition tables exported using datapump

Hi All,
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
OS: RHEL
I exported a table with partitions using datapump and I would like to verify the total number of all the records exported of all these partition tables.The export has a query on it with WHERE ITEMDATE< TO_DATE (1-JAN-2010). I need it to compare with the exact amount of records in the actual table if it's the same.
Below is the log file of the exported table. It does not show the total number of rows exported but only individually via partition.
Starting "SYS"."SYS_EXPORT_TABLE_05": '/******** AS SYSDBA' dumpfile=data_pump_dir:GSDBA_APPROVED_TL.dmp nologfile=y tables=GSDBA.APPROVED_TL query=GSDBA.APPROVED_TL:"
WHERE ITEMDATE< TO_DATE(\'1-JAN-2010\'\)"
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 517.6 MB
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2008_Q3" 35.02 MB 1361311 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2008_Q4" 33.23 MB 1292051 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2010_Q4" 5.875 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2011_Q1" 5.875 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2009_Q3" 30.53 MB 1186974 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2010_Q3" 5.875 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2009_Q1" 30.44 MB 1183811 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2009_Q2" 30.29 MB 1177468 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2009_Q4" 30.09 MB 1170470 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2010_Q2" 5.875 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2011_Q2" 5.875 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2010_Q1" 5.875 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2011_Q3" 5.875 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2011_Q4" 5.875 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2012_Q1" 5.875 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2006_Q3" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2006_Q4" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2007_Q1" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2007_Q2" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2007_Q3" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2007_Q4" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2008_Q1" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2008_Q2" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2012_Q2" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2012_Q3" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_2012_Q4" 0 KB 0 rows
. . exported "GSDBA"."APPROVED_TL":"APPROVED_TL_MAXVALUE" 0 KB 0 rows
Master table "SYS"."SYS_EXPORT_TABLE_05" successfully loaded/unloaded
Dump file set for SYS.SYS_EXPORT_TABLE_05 is:
/u01/export/GSDBA_APPROVED_TL.dmp
Job "SYS"."SYS_EXPORT_TABLE_05" successfully completed at 12:00:36
Edited by: 831134 on Jan 25, 2012 6:42 AM
Edited by: 831134 on Jan 25, 2012 6:43 AM
Edited by: 831134 on Jan 25, 2012 6:43 AM

I assume you want this so you can run a script to check the count? If not and this is being done manually, then just add up the individual rows. I'm not very good at writing scripts, but I would think that someone here could come up with a script that would sum up the row count for the partitions of the tables from your log file. This is not something that Data Pump writes to the log file.
Dean

How to fix partition table by use fdisk

Similar Messages

Maybe you are looking for