How to fix problem with installed and working add-ons disappearing after update to 20.0.1?

I updated to version 20.0.1 of Firefox the other day. I had the theme Qute 3++ 1.19 installed and it took 3 restarts of the browser before it kicked in and worked again, for some reason.
Then I noticed that my MillBar Community toolbar 3.18.0.7 had disappeared, which I use for the feature of collecting my email accounts to get fast notifications about new emails. Also my Adblock Plus 2.2.3 seems to not be working because all of a sudden I see ads everywhere and I also discovered a bunch of pop-ups from nowhere. I used these add-ons for such a long time that I was shocked.
When i went to type a message to a friend, I also noticed that my american-english dictionary/spellchecker was not working.
The first thing I checked was that none of these add-ons was inactivated or said to need updates. The dictionary had disappeared, so i re-installed that. I also reinstalled Adblock Plus. Still it doesn't work.
When i entered the email information into the toolbar options, it collects my emails for a while, but suddenly it stops and the information is not there anymore. If I restart the browser it also disappears.
Same thing with the dictionary. it works for a while, and then suddenly it's like it's disabled.
And the add-ons are still in what seems like working conditions in my lists. No errors that I can see, no updates available.
I'm really at a loss as to what to do, I've never had problems like this before that couldn't be solved with an update of the add-on. So I'd be very grateful for help with this and hope that I have provided enough information.

this help is not useful.
Since the new firefox version 20.0.1, '''no more of my add-ons work''' (except firebug ). They are installed '''but not visible '''(no toolbar, no menus) !!! same for the new add - ons that I installed. I tried everything: to reinstall add-on, to reinstall firefox.
this new version of firefox is really horrible, '''thank you for making a corrective because I cannot work any more with'''

Similar Messages

Upgraded to mac os x maverick 10.9.1. Any suggestions on how to fix problems with audio and video bugs?

Having problems with video and audio delays for mac ox x maverick 10.9. Are there any ways to fix this?

I also noticed that if I wiggle my mouse around while I watch video streams the video&audio is significantly smoothier.

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

It may be due to Continuity
The following quote is from Connect your iPhone, iPad, and iPod touch using Continuity
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.

I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from ....Try providing more room for peoples questions ...

I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from my library and my phone, Where are they ????
I have gone to download again and told i can purchase them again
But there is no option to download all ready purchased items..
Can you provide an explanation and solution .

Are you using the same Apple id as used to originally purchase them
and are you using iTunes on a PC/Mac

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

If you have problems with Yahoo, start FF4 in safe mode and see if it works. If yes, you have a problem with one of your add-ons.

Apparently some of your "good" add-ons do not work right with FF4. If you have a problem with YAHOO MAIL, start FF4 in Safe Mode (Restart with add-ons disabled from the Help menu). Then try your Yahoo again. If everything works, then the problem is with one of your add-ons. You can selectively work out which add-on is the problem. For a lot of these user problems, this should help... worth a try anyway.

Anything?

Strange Problems With Display and Permissions Since 10.5.1 update.

Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
Here is a screen shot of the line and dock problem.
Here is a screen shot of my "About This Mac.
If anyone could lend some light on this issue, I would greatly appreciate it.
Thanks
Jeff

you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
btw - no solution yet.

My iMac drops settings information. Sounds associated with receiving and sending an email disappear after about a week and return following a restart after a shutdown. Also my picture taken, which was taken about a year ago, recently disappeared.

My iMac drops settings information. Sounds associated with receiving and sending an email disppear after about a week and return following a shutdown and a restart. The cycle contunes. Also, the picture of me that was taken when I bought the iMac more than a year ago and appeared at logon recently disappeared and was replaced by a soccer ball. I took a new picture, which appeared for about a week at logon, and it has now been replace by a blank picture.

The standard procedure with these types of isues is a PRAM reset.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Excerpt from http://support.apple.com/kb/ht1379

How do I fix problem with linked and cropped image frames not printing properly when spanning pages?

We are using InDesign (ID) to develop and print church bulletins which contain a combination of text frames and graphics. One of the graphic types we use are TIF files which are high-resolution scans of hymns.
A hymn usually has a combination of the musical score, plus the lyrics - with many verses., so the modular structure is 'staff' composed of a treble clef, followed by verses, followed by a base clef.
If the example above had 6 verses instead of one, we would crop the image by adjusting the frame, so that the treble clef and the desired verses showed through the frame.
We would then copy and link the frame - piggy back - adjusting the next content window etc....so we build a custom version of the music as a series of linked frames - each with the same base image, but a different frame position.
So this works fine, when we do this on a single page, but when we then add a 'last staff' at the top of the following page, we encounter print problems with some output devices.
Imagine a two-page spread, with a full page of music on the left, and the last staff (treble clef, verses, base clef) unit as a separately linked frame at the top of the right page of the spread.
It displays correctly, and will print individually as pages correctly, but when we print it as a booklet, the last frame drops out and we have blank space.
I can print the document to PDF and it works fine, but if I print it to a copier or laser printer I get drop out.
It is inconsistent.
Previews are always okay. Individual page prints are okay, but when you print the entire document, the last frame in this kind of linked series gets blanked.
If we create and name the image differently, and call it in as a new image - (not linked to the previous), but it is still a large image that is cropped to a small piece, then it doesn't print.
If we save the last frame as a different image type (take the TIFF file into photoshop, crop it and save it as a jpg - so it is only the 'snippet') and then import it, it works fine.
So my question to you InDesigners....is there some setting or tip or trick I need to know to be able to link a series of frames with the same base image, but different crops and make it span across two pages properly.
Or do we need to play this game of crop and trim the image so that it doesn't drop out?
Any thoughts, advice, direction would be gratefully received!

I did a lot of such hymn things in the past, but I was alway working on the scans in Photoshop, like adjusting, retouching spots and cropping. And I was always seperating those images to be more flexible so I never run into such a problem.
I am always scanning in a higher quality level than I would need, I scan it in color, this allows me to eliminate paper color easily, even if I need 1-bit images at the end, I do it in color, so I can also turn the image.
I did once run into a similar problem with a scan I have got from a copier-scanner machine (it was not a song). But saving as PSD resolved my problem.
So I would suggest: Open your files in Photoshop, resave them as PSD files and use those instead. If you use 1-bit images (which is fine for this type of images) you should use a resolution equal to the printer's resolution.

How do fix problem with iPages - type does not enter - ?

How do I fix this problem with Pages - type from keyboard does not enter ? If I need to re-install, How do I do that?

Hello DonAndNorma,
You may need to uninstall, then reinstall the Pages application. Steps for doing so can be found in the article linked below.
OS X Mavericks: Install, update, and uninstall apps
http://support.apple.com/kb/PH14299
Cheers,
Allen

How to fix problems with AppleTV disconnecting suddenly from when streaming from iPhone or iPad

My AppleTV suddenly gets disconnected from streaminng when I use iPhpne or iPad. This didn't occur first 6 months from purchasing the item but now that my AppleTV is about 1.5 yr old, it happens pretty frequently and it really is annoying, when you try to watch 1+ hour long shows through streaming (AirPlay). Anyone know how to fix this problem? Note: this is not related to my wifi connection as other things with wifi works just fine when this is happening to my AppleTV. Thanks!!

That doesn't rule out a network issue.
Reboot ATV and router, make sure router is up to date.
Try Ethernet
Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, look for signal strength and noise

Anybody has any problems with installing and printing with canon lbp6650dn?

hi,
i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
thanks!

Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
Message was edited by: First Magus

How to fix problem with installed and working add-ons disappearing after update to 20.0.1?

Similar Messages

Maybe you are looking for