How to force database replication after CUCM upgrade

Hello All, I will be doing an upgrade to version 10.5 from 8.5 of CUCM. I've done this before and as documented started with the publisher and then subscriber. When I have done this I always wait and check Database replication via RTMT and the CLI.
I'm always nervous as this process seems to take a long time. Is this just a waiting game or is there a command that I can force replication to my subscribers? How long should this process really take? I never know....
Thanks,
Dan

Dan,
Use "utils dbreplication runtimestate" to check the replication status of your servers in the cluster. The servers should show connected to the publisher and a status of 2
Or you can use unified reporting to generate report on db replication as follows.
Check Database Replication:
Access Publisher CUCM GUI
Navigate to Cisco Unified Reporting
Select System Reports
Select Unified CM Database Status
Generate New Report
In the Unified CM Database Status section of the report, expand the View Details under the All servers have a good replication status and confirm a Replicate State for all servers of “2” as follows:

Similar Messages

Wiki database failure after Mavericks upgrade

After restarting the server after having upgraded to Mavericks, I am getting the following error when trying to connect to the wiki or XCode sites:
Caught exception "Connection to DB failed" [CSDatabaseError] executing route /app-context/xcode/:
0   CoreFoundation                      0x00007fff94b4241c __exceptionPreprocess + 172
1   libobjc.A.dylib                     0x00007fff9744be75 objc_exception_throw + 43
2   CSService                           0x0000000106a7ac8d -[CSConnectionPool openConnection] + 3309
3   CSService                           0x0000000106a7b65a -[CSConnectionPool currentConnection] + 98
4   CSService                           0x0000000106b09923 -[CSAuthService _sessionForField:value:] + 96
5   CSService                           0x0000000106afb29f +[CSHTTPRouteHelper setCurrentSessionForRequest:] + 150
6   CSService                           0x0000000106b10d0a __27-[CSAppContextService init]_block_invoke238 + 107
7   CSService                           0x0000000106af6e6a __53-[CSRoutingHTTPConnection httpResponseForMethod:URI:]_block_invoke + 95
8   CSService                           0x0000000106afa40b -[CSHTTPBackgroundResponse bounce:] + 286
9   Foundation                          0x00007fff9249670b __NSThread__main__ + 1318
10 libsystem_pthread.dylib             0x00007fff8b3ef899 _pthread_body + 138
11 libsystem_pthread.dylib             0x00007fff8b3ef72a _pthread_struct_init + 0
12 libsystem_pthread.dylib             0x00007fff8b3f3fc9 thread_start + 13
The normal websites work fine. Also, the XCode and Wiki sites were working fine for a day before I restarted the server this morning (it got hung up, probably having to do something with this error, and I had to force a hard restart).
Any thoughts on what might be causing this?

My result:
Caught exception "Connection to DB failed" [CSDatabaseError] executing route /app-context/wiki/:
0   CoreFoundation                      0x00007fff86cc025c __exceptionPreprocess + 172
1   libobjc.A.dylib                     0x00007fff813cae75 objc_exception_throw + 43
2   CSService                           0x00000001042aaefd -[CSConnectionPool openConnection] + 3309
3   CSService                           0x00000001042ab8ca -[CSConnectionPool currentConnection] + 98
4   CSService                           0x000000010433ab09 -[CSAuthService unauthenticatedSession] + 82
5   CSService                           0x000000010433b0e3 -[CSAuthService currentOrNewSession] + 154
6   CSService                           0x000000010432b481 +[CSHTTPRouteHelper setCurrentSessionForRequest:] + 264
7   CSService                           0x0000000104340d0a __27-[CSAppContextService init]_block_invoke238 + 107
8   CSService                           0x0000000104326fda __53-[CSRoutingHTTPConnection httpResponseForMethod:URI:]_block_invoke + 95
9   CSService                           0x000000010432a57b -[CSHTTPBackgroundResponse bounce:] + 286
10 Foundation                          0x00007fff8cbe876b __NSThread__main__ + 1318
11 libsystem_pthread.dylib             0x00007fff8da60899 _pthread_body + 138
12 libsystem_pthread.dylib             0x00007fff8da6072a _pthread_struct_init + 0
13 libsystem_pthread.dylib             0x00007fff8da64fc9 thread_start + 13

How to Reinstall Lenovo Security After Lollipop Upgrade?

I upgraded my lenovo s60a from kitkat to lollipop but after the upgrade, lenovo security was removed/ uninstalled. I can't find it again. I really like this app and need it badly. How to install it again? please help
Regards
[Moderator changed title to describe topic.]

I really loved the Lenovo Security App too. However, it is no longer available in the Android L update (for all international phones, not only S60-A, but most (or all) of the other models with Android L as well).

UCCX After CUCM Upgrade

Hi All
I am running UCCX 8.5.1.11004-25 and upgrading to CUCM 8.6.2.23900. I have completed several CUCM upgrades with various dependencies but never with UCCX as a dependency. I have checked the compatibility matrix and this all seems fine however i cant find any information on if anything needs to be done to UCCX once i switch versions on CUCM.
Im suspecting that i will need to run a JTAPI re-sync which will download a new JTAPI if it finds a different version ? Is this correct and also is there anything else i need to be watching out for ?
Thanks, Carl Ratcliffe

Thanks Tanner, quick reply and confirmed what i thought, just didnt want to get caught out at 2 in the morning with something i have missed.
Thanks, Carl

ELM shows insufficient licenses after CUCM upgrade from 9 to 10.0.1

Hi All,
I just finished upgrading cucm 9 to cucm 10.0.1. Upgrade completed successfully, but elm now shows insufficient license message.
This is a Vmware installation BTW, I doubt that it matters the CUCM 901 worked fine with its ELM.
The ELM is coresident with CUCM. I though that upgrading CUCM will upgrade ELM too, but the Dashboard says to upgrade to latest version of ELM.
When I ordered upgrade through UCSS and downloaded all the files that were included in this upgrade order, one of the files was CiscoPrimeLM_64bitLnx_10.0.1.10000-19.sgn.iso.
I tried to use CUCM OS administration with this file to upgrade ELM, but OS Administration doesn't recognize it as a valid file.
The file that I used for CUCM upgrade was: UCSInstall_UCOS_10.0.1.10000-24.sgn.iso
So at this point I'm not sure whether ELM needs to be upgraded or I need new licenses for CUCM version 10.
Thanks
Yury Brodsky
Telecommunications Specialist
AudioCodes
27 Worlds Fair Drive
Somerset, NJ 08873
Direct: 732-652-2162
Fax: 732-469-2298
Email: [email protected]

Upgrading co-res CUCM should have upgraded your ELM as well. It should now show as Prime License Manager when you log in. I'm guessing you just don't have any CUWL 10.x licenses installed. Can you attach a screenshot of the License Usage page in PLM?
You may need to email [email protected] to move your 9.x licensing to 10.x licenses.

How to deinstall OMS10g binaries after OMS11g upgrade

I've upgraded Grid Control from 10.2.0.5 -> 11.1.0 on our RHEL5 server.
I now want to deinstall OMS10g, but when I run the installer, I don't see an OMS10g home in the list of homes available (I only see my 11g database, and OMS11g homes).
The 10.2 Grid Control docs say I can run the $ORACLE_HOME/install/deinstall/Deinstall.pl command, but it indicates it will deinstall the database as well, so that isn't an option.
If I must do this manually, I presume I can remove the OMS10g home and subdirectories, and any linux startup scripts.
Can someone explain what step(s) need to be done to cleanly remove it from the Oracle Inventory?
If there is some other preferred way to deinstall, please also advise.

Well, no,... I'm not going to remove my Oracle db home...
Yes, I could rm -rf my OMS10g home, but how do I remove the Oracle Inventory entries cleanly? Is there a doc somewhere which outlines this?,... or don't I need to be concerned about the Oracle Inventory?

Agent Reserverd caller hears Dead air after CUCM upgraded to 10.5.2.11005-1

After a recent upgrade on my SME head end cluster from CUCM 9.1.2.11900-12 to 10.5.2.11005-1 I have been having an issue with my call center agents on a leaf cluster running 7.1.5.35900-7 (Cluster 1). This is both enterprise and express agents.
The call comes in on a leaf cluster running CUCM 9.1.2.11900-12 (Cluster 2)
Then goes to a head end SME CUCM 10.5.2.11005-1 cluster via a SIP trunk
Then the calls goes to a CUCM 7.1.5.35900-7 (Cluster 1) leaf cluster via an Inter-Cluster Trunk
The call center agents get put in reserved status but never get the call.
The callers just hear dead air.
The only changes is the upgrade to the head end cluster to 10.5.2.11005-1.
If I add a dial peer on the PSTN gateway CUCM 9.1.2.11900-12 (Cluster 2) leaf cluster so the call goes from gateway to CUCM 7.1.5.35900-7 (Cluster 1) the agent does not have any issues.
My initial thought is a possible change on the trunks from Cluster 2 to SME or SME to Cluster 1.
Anyone have any thoughts on this?

Not sure if this is related since this was a while back and it was on version 8.5 that I noticed this. If I recall there is was an issue with the SME cluster talking to the leaf cluster. If the SIP Trunk was talking to a specific node in the cluster, the intra cluster signaling had some problems. i.e. if you had Sub-A and Sub-B and if the SME Cluster sent the invite to Sub-A while the phone sat on Sub-B, the call wouldn't go through. It had to do with making sure that the Call Manager Group assigned to the device pool that was assigned to trunk had all CCM nodes in the cluster added to it. This became an irritation when I was working on it because we had more than 3 CCM Subscribers and there is a limit of 3 CCM nodes per Call Manager group and we had 4 CCM subs in the cluster which means we would never be able to send calls to a phone in the leaf cluster registered to the 4th node that wasn't part of the CCM Group for the device pool used by the SIP trunk between the Leaf and SME cluster.
You are dealing with 10.5 and you also mention that this was working prior, so I am not sure if this is the same, but I would certainly play around with the CMG for the device pool of the trunk and the CM that the phone registers to.

How to restore missing fonts after Mavericks upgrade

If your fonts are not working in Pages and other software after a Mavericks 'upgrade', it might be that you still have them, and simply need to turn them back on...
1. Go to Font Book
2. Find the failing fonts.
3. If they are marked 'Off' then right click them and highlight 'Enable Fonts' option.
Hope this helps!
Dan
FWIW Mavericks has wasted DAYS of my time this week... it disabled fonts, made my WD HDD incompatible, trashed Time Machine and lost my Google Drive folder, so my files don't sync etc.

There's a very old thread about this for CS2. Domingo Chavez listed the required fonts and where they belong for that version, and even posted them for others to download and replace. I don't know if the collection has changed, but judging from my system I think not, so it would be worth trying the older files. As always, back up first..
Start reading at http://forums.adobe.com/message/1308262#1308262 where you'll see the lists, and a bit further down you should find the links to where the files were posted. The first link is to a.rar archive, further down is a link to a slightly freindlier .zip version. What the heck, here's that link, which still seems to be active: http://public.newrandom.com/Reqrd.zip
But read the thread, anyway, so you understand what's up.

How to clean database tables after testing?

Hello, All !
I'm beginer in eCATT. I have a simple question.
My test run some transaction. It put record into database table. I need check some fields of this record.
I want run this test avery day.
How I can remove record automaticly? It's important because records can't have a douplication.
Best regards.

Hello,
You can delete your entries in the table by logging into the transaction SE16N and entring the table name and selecting your entries to be deleted.
Thanks & Best regards,
Ajay

How to purge Workflow queue after R12 upgrade before starting WF Mailer?

Hi,
We are about to upgrade to R12.1.3 from R11.5.9.
As part of the testing, I configured and started the Workflow Mailer in the new system. As soon as I did that, the system started sending a ton of notifications regarding past Requisition approvals apparently queued in the system. WF Mailer has been down since I did the last upgrade test.
We plan to approve all requisitions before the cutover in the old system, so there should be no email notifications pending. Is there a way of updating msg_state of those notifications in the wf_notification_out table with a value of "READY", so we can make sure that we will have a clean system and users will not receive any notifications regarding the past requisition approvals?
Thanks,
Sinan

Please see these docs.
Note: 847889.1 - Stop Workflow Notification Emails During Clone
Note: 828812.1 - How To Stop Old Outbound Workflow Notification Email Messages During Clone Activity
Note: 603003.1 - How To Remove Workflow Data On A Test Or Cloned Instance
Note: 372933.1 - How to purge e-mail notifications from the workflow queue so the e-mail is not sent
Note: 736508.1 - How to Cancel Email Notifications for Particular Workflow Type
Regards,
Hussein

How to communicate database immediately after portal signin

I need to extract data from the database to show in the channels when i log-in into portal server.

Create your own provider (using jdbc to query your data base), format your content and post into your channel created by amconsole. See Portal customization manual. http://docs.sun.com/app/docs/doc/817-7694 Jerry

OEM job : How to force job status after a PLSQL job run?

Hello,
We are under 10gR2, using OEM with a lot of jobs that call PLSQL procedures.
For some obscur reason, when a PLSQL procedure fails, the job status is always "Succeeded". This is not useful at all !!!
So, as we don't kow why, I was thinking about setting the return job status in the PLSQL procedure itself ...
Is it possible ?
How can I do that ?
I hope that my explanation is clear.
Thanks for your help,
Olivier

Hi Olivier
I dont understant the first time.
Yes its very stange that the job appear like suceed and the PL procedure had failed.
If you want more control to this situation, in my situation i had too much problems with jobs that executing SQL scripts.
Then i change the SQL SCRIPT JOB for OS SCRIPTS JOB and in this scripts i can controlling the execution
This an example
Job Statistics.sh
Gric Control --> Job --> Operating System Script
/home/oracle/script.sh --> In the parameter line of the job
# the script.sh
ORACLE_HOME=/oracle/10.2
ORACLE_SID=PROD
$ORACLE_HOME/bin/sqlplus "/ as sysdba" << EOF
execute dbms_mview.refresh('MVIEW_SALES','f');
EOF
res=$?
if [ ${res -ne 0 }
then
mailx -s THE_JOB_HAD_ERRORS [email protected]
else
mailx -s ok_execution [email protected]
fi
In my enviroment was a solution to control the exact execution of the jobs
Regards

How to recover contacts/notes after ios6 upgrade on iphone 3gs?

I still have the backup folder in my PC but itunes is not recovering it in my phone...
Initially what I did was backup the phone and then cut that folder and move it into another drive (as I needed almost 10gbp just to do the upgrade in the software!).
Once the upgrade was done I moved the backup folder (which is about 6gbp) into the same folder in Appdata: Apple itunes: mobile data folder.
I tried doing Recover from backup folder in my PC through itunes but it will not recover anything! No contacts, notes or anything!!
Please help. Does it have anything to do with icloud or anything else?
Thanks
PD. Just so you know the upgrade was prompted by the Whatsapp ceasing to function on 26 Dec 12 (just like other users as I have been reading in the forums).

i have the same problem anyone help me out to get my contacts back it irritating!!!!!!

[Solved by itself] Loading module aha152x failed after kernel upgrade

Hi all,
I have a ten-year old Epson GT5500 scanner plugged onto an ISA card.
This was quite hard to get it working under linux but it worked well untill yesterday last update.
I have the following error output when trying to load aha152x module:
# modprobe aha152x
FATAL: Error inserting aha152x (/lib/modules/2.6.27-ARCH/kernel/drivers/scsi/aha152x.ko): No such device
I have the following line in /etc/modules.conf:
alias scsi_hostadapter aha152x options aha152x aha152x=0x140,9
How can I get the scanner back to work?
Thanks.
Last edited by Jeddo (2008-11-15 11:54:12)

fwojciec wrote:Did you build the module yourself? If so you might have to rebuild it for the new kernel version.
No. The configuration to get the scanner working under linux comes from a how-to and remains valid after kernel upgrades -- until yesterday. It does not need any module building, only loading.

CUCM Database Replication Status MIB

Hi Guys,
Can you please help me whether we could monitor CCM database replication status through SNMP MIB or OID..
Also please guide me in how to configure SNMP traps for the MIBS??
Regards,
Indrajith PC

Hi,
please take a look at the CUCM serviceability guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/9_0/admin/CUCM_BK_C136FE37_00_cisco-unified-serviceability-administration-90/CUCM_BK_C136FE37_00_cisco-unified-serviceability-administration-guide_preface_00.html
I'm afraid there's no trap generated when DB replication issues occur, so you might want to do periodic polling.
The above referenced document contains some basic information which MIB's may be interesting to you and how to get them.
Personally, I would download and register them all, and then just walk the whole tree and cherrypick ;-)
G.

How to force database replication after CUCM upgrade

Similar Messages

Maybe you are looking for