How to format the font in Cell when export to Excel file?

Dear all,
I am using the CRJ SDK 12 to export to Excel file, but i i want to format the font of Cells in Excel when exporting them.
Can you help me to solve this issue?
Thanks,
Nha

There's no control over per-cell formatting for Excel exports.
Sincerely,
Ted Ueda

Similar Messages

How to Formate the Font of The Tree's Parent Node ?

Hello,
Pls. , how to Formate the Font of The Tree's Parent Node ?
Other Formatting Aspects..etc.
Regards,
Abdetu..

In ur code is HTREE$ is of type varchar2 or ITEM?
Give valid parameter for item_name/item_id.
This code will be usefull to add/change the icon of the node. You can show the 16x16 image (gif, ico based on your forms_home\forms\java\oracle\forms\registry\Registry.dat file) before the tree item's node lebel.
I tried in this way to get the "Favourites" node label as *"Favourites"* (Bold).
I make *"Favourites"* as a gif icon (16 x 270) and added it as a node icon. but it shows 16 x 16 of my image.
So using this code u cannot format the font of the tree's parent node.
Balaji.

Crystal Report 2008 doesn't set page size when export to excel file

Hi,
I am using Crystal Report 2008 Developer edition.
At Crystal report design time setting the below page setup:
Page Options -
to A3(297X420 mm)
Orientation --- Landscape
and using the following code in .net (c#)
I am using below format options to export in excel in .net 2005
ReportDocument oReport = new ReportDocument();
oReport.FormatEngine.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
oReport.FormatEngine.PrintOptions.PaperSize = CrystalDecisions.Shared.PaperSize.PaperA3;
if (aParamlist.ReportFormat == ReportFormatEnum.MicrosoftExcel)
ExcelFormatOptions excel = new ExcelFormatOptions();
excel.ExcelUseConstantColumnWidth = false;
// Use detail section one as a guideline to determine column width
excel.ExcelAreaGroupNumber = 1;
//excel.ExcelAreaType = AreaSectionKind.Detail;
excel.ExcelAreaType = AreaSectionKind.Detail;
// Prepare exporting options
ExportOptions export = oReport.ExportOptions;
export.FormatOptions = excel;
export.ExportFormatType = ExportFormatType.Excel;
oReport.Export();
when export to excel it doesn't set the Paper Size to A3(297X420 mm).
Is there any way to set the paper size while export to excel or in other formats also????
Thanks & Regds,

Hi,
thanks for your email.
This is not happening in development environment.It is setting the paper size anf paper orientation properly.
this is happening in the production environment where only redist installation is done.
thanks

How to change the font more visible when the field is masked

Hi experts,
In the web client we have a search view where some of the field is not editable so the search field value looked faded. My client want the font should be more visible and dark.

Hi Tarannum,
Not sure how you acheived greying out of attributes on search page
But, colours of font can be changed using skins.
/people/ingo.deck/blog/2009/01/23/the-eye-must-be-pleased-as-well-skins-with-crm-70
I did not work on this, just had an idea of this blog.
Regards,
Masood Imrani S.

Why does Final Cut Pro change my title's baseline after the first two titles when exporting a master file?

Hey Guys,
I want to use a Zoom title (Titles -> Build In/Out -> Zoom). I only want the title, not a subtitle. So I insert Zoom's everywhere, type in my stuff for Line 1, delete the contents of Line 2, format it (font, tracking, etc.). Everything looks great in the Viewer. I let it render, then export a Master – same as source. I open the MOV, the first two titles are great. Then every title thereafter looks like someone changed the position by 100 pixels south of its original location.
Here's what I've done to troubleshoot it:
Removed all Zoom's, inserted new ones, removed the contents of Line 2 and left Line 1 alone (i.e. it still reads "Title"). When I export, everything's fine. The moment I change formatting or put in new copy in Line 1, same thing happens – every title changes position by 100 pixels down.
Downloaded Digital Rebellion's Preference Manager, trashed pref's/
I'm using a TTF with a bold type body only. Figured I'd leave it at Gill Sans Bold. Same thing happens as soon as I type something custom into Line 1.
I had a text style saved and removed it. (Which wasn't easy. Solution here.)
Has this ever happened to you?
Thanks!

Hey Jim,
Thanks for the follow-up. Here are some more details:
OS - 10.8.2
FCP X - 10.0.7
I can't update either of these because of my Avid installation.
Something else I didn't mention – this happens in a 4K project. Notice how a default Zoom title looks:
Lines 1 and 2 are almost stacked on top of each other.
Here's my title style:
Here's what the title looks after I apply the title style, modify Line 1, and remove the contents of Line 2:
And here's how it looks in the exported master file MOV:
Notice how it's pushed down?
Then I decided to make a 720p project. No more title problems.
So if you have some 4K footage, Jim, give it a go. Or if there's another 4K-er out there, try this and let me know.
Thanks!

Very Big Cell when export in Excel

Dear Tech guys,
I use VS 2008 with VB and CR 2008.
Crystal report, and export in PDF are OK, but when i export the report in Excel, i have the bellow problems.
The report is a delivery note with 7 columns and many rows.
1. In all pages, the page numbers are lost, except from the last page.
2. After last row, excel has a very big in height (height > 300) row. Because of this, excel creates a new empty page and at the bottom of the new page i see the page number (Page 5 of 5).
Can you help me with this problem??
I have this problem after the last update (Service Pack 3).
Visual Studio 2008: 9.030729.1 SP 1
Crystal Reports 2008: 12.3.0.601
Thank you in advance.
Best regards,
Navarino Technology Dept.
Edited by: Navarino on Jul 15, 2010 2:47 PM

Dear all good morning from Greece.
First of all, i like to thank you for your quick respond.
Dear Ludek Uher,
1. Yes, this is from a .NET (3.5) application with VB.
2. I do the export via code.
3. From the CR designer i have the same problem.
Dear David Hilton,
The photo, is not working.
I found the option "On Each Page" from the CR designer and i changed it. Now i get the page number on every page but i can see that something is wrong with the page height and with the end of the page of the report.
I will try to show you the problem of the Excel file, after the option "On Each Page":
Header........................
Field1 field2 field3 ......
row1 .......
row2 ......
row3.....
row56 ......
{end of page 1}
{new page 2}
row57
row58
row59
Page 1 of 4 (the footer of the first page must be in the first page, but it shown in the second page)
row60
row61
row62
{end of page 2}
{new page 3}
row110
row111
row112
Page 2 of 4 (the footer of the second page must be in the second page, but it shown in the third page)
row140
row141
row142
{end of page 3}
{new page 4}
and go on.....
I hope this helped.
If i change the margins from Page Break Preview in Excel, the pages are OK. So i thing that something conflicts with the end of the page. The report does not understand the end of the page.
If there is a way to send you the file or screen shots, please tell me how.
Thank you in advance again.
Best regards,
Navarino Technology Dept.
Edited by: Navarino on Jul 16, 2010 9:09 AM

How to avoid double extension *jpg.tif when exporting layers to files?

Please help, I checked all the topics related and it seems nobody bothers about this issue.
When I do a Photomerge of a series of jpg files, Photoshop builds a multilayered file - but preserves in the name of each layer *.jpg
When I want now to export layers to files, the Scripting function will do the dumb thing and export each file with the original name - ending in JPG - , plus the extension required by me - for ex tif.
It does the same if I chose to export as jpg files and puts double extension again < *.JPG.jpg> at the end of each file exported from a layer.
I looked everywhere and couldn't find a way to solve this behavior, which forces me to do batch renames in Bridge.
The next program where I need the files (After Effects) doesn't want to import these files with double extensions.
Has anyone encountered this issue and what can be done to avoid these double extensions at Scripts/Export layers to files?
Thanks for the answer

I have just altered my script so that it will remove the extentions if found.
http://www.scriptsrus.talktalk.net/Layer%20Saver.htm
Also it would be better to use :-
var layerName = activeDocument.activeLayer.name.replace(/\....$/,'');
As this way it doesn't arbitory remove the last four characters, only if it finds a fullstop.

How to copy the table datas into an open office excel file .

Hello All ,
I have a form which contains several pages . Each page contains some tables in it . How can we copy each table datas into an open office execl files ??
I mean there will be several excel files each file corresponds to a particular table in the form. I am using LiveCycle Designer ES 2 . in Windows XP.
Thanks
Bibhu.

Hi Bibhu,
Here is a screenshot of exporting the form data to XML:
I have not imported XML into Excel, but I know that Excel 2007 has tools for this in the Developer tab. I don't have Excel 2007 on this machine, so I can't get screenshots. However using Acrobat you can merge the XML file into a spreadsheet, using the same menu Forms > Manage Form Data > Merge Data Files into Spreadsheet.
In addition you can set up a data connection to the spreadsheet. However this will only work in a Windows environment and you need to share the OLEDB data connection with all users. In addition if you Reader Enable the form with Acrobat, the data connection will not work.
So on balance if you want to get data to a spreadsheet I would recommend export XML.
Hope that helps,
Niall

Shifting of Cells When Exporting To Excel

Post Author: Victoria
CA Forum: Exporting
I'm having a problem when an Address 1 and Address 2 field is involved in Crystal. If an Address 2 does not exist for the customer, the remainder of the fields for that record shift to the left. This causes a major clean-up issue when there are a large number of records involved. Is there a formula that I haven't thought of that might help me avoid this? Victoria

Post Author: V361
CA Forum: Exporting
Assuming the address 2 field is null, you could write a formula to detect the null and replace it with a group of spaces. I hope excel will see the spaces as valid.
if isnull () then " " else
If this doesn't work, are you exporting to excel, or excel data only ?

How to change the order of fields when exported to csv

I am using LiveCycle Designer 8 and have created a great form with the correct tab order.
However, when the form is filled in and returned to me, the fields in the CSV file are all over the place. How can I make sure the fields in the CSV file are displayed in the same order as the tab order?

The actual requirment is to re-arrange the elements of the queryoutput node, to look more organised
say for ex.
Seq 1:
c code company name g/l ac g/l ac description
Seq2 :
g/l ac description c code g/l ac company name
Seq 1 way of representation is more organised that Seq2. How can we achieve this re-arranging of ordering in the queryoutputnode.

I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently. And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing. what am I missing?

I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently. And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing. what am I missing?

You can type the email using what you set in preferences and then highlight the text and use command - minus sign (or command - + for larger) to reduce the size of the text.
You can also type command - T and a window will appear allowing you to select fonts/sizes/color/ background highlight.
The above works in Notes also. I haven't tried to do this in any other Apple application.
For incoming emails, you can use the above to reduce font size, but I don't know of a way to permanently set the incoming font size to a default.

How can I change the fonts in "contacts" when printing mail labels

How can I change the fonts in "contacts" when printing mail labels ? I used to be able to do this but in Mavericks this ability seems to have gone away. Am I missing something ?

Actually in my case it doesn't work. I used to be able to pull up the font window with it but the button merely flickers when I click it. The image selection button and font color both are functional. WEIRD. I don't think this is a Mavericks issue as I recall having it come up with one of my user profiles before installing. Now I can't make it happen with either of my user profiles.
I don't seem to have printing issues in other applications. And I recently reset the fonts in a futile attempt to correct this.
I may post a new topic in Mail Contacts and Calendar if there is no response here after a bit.

How to increase the font size of the report output in the printout.

Hi Team,
i have a requirement like to print the report output as a direct print from an internal table.I am using the below mentioned code, the output is printing fine but the Font size of the output text is so small so i need to increase the font size of the text of output data.
call function 'GET_PRINT_PARAMETERS'
   exporting
     immediately                    = 'X'
     line_count                     = 65
     line_size                      = 320
     mode                           = 'CURRENT'
     no_dialog                      = ' '
     release                        = 'X'
     user                           = sy-uname
   importing
     out_parameters                 = st_param
   exceptions
     archive_info_not_found         = 1
     invalid_print_params           = 2
     invalid_archive_params         = 3
     others                         = 4.
if sy-subrc eq 0.
    new-page print on parameters st_param no dialog.
could you please suggest me how to increase the font size while printing the report output..
Thanks in Advance.
Puneet.

hey,
in our system when we click on print. on widow is coming.
there is a properties button.
we click on it.
there FORMAT----AND then we select forat from there and then printing .
not sure. but check on ur system. is there properites button.
HI,
READ THIS,
You can specify attributes such as the character width and font size in the device type formatting yourself.
contact ur basis team .
in the report PRINT-CONTROL SIZE option is there. try to find more o this.

How to change the font size of pdf reports

hi,
in my project i'm using wad for my reports
when i execute these reports from wad and convert it into pdf format the font size of the pdf report is very small.
what can i do in order to rectify this?
are there any settings where i can change the font size?
thanks in advance

I do not have AA6 available right now (I can check at home this evening). I am also using AA Pro, not Std. In AA7, there is a text box tool that is a commenting tool. When I started typing, a properties toolbar came up that had the font size and such. I haven't figured out how to get the toolbar after the fact. In AA8, I selected the text box tool and then went to view and selected the properties bar (the font size and all showed then), or use Ctrl-E when editing the text. I have not been able to figure out how to edit the text in a text box after you have created it - think it is a mental block right now. Bill

How to change the font size and style on run time

dear all
i try to change the font style and font size on runtime. I did the following:
1- i created an item(:font_size) in which i will write the size of the font for the the other item ('customer_name')
2 on the post_change trigger for 'font_size' i write this code
SET_ITEM_PROPERTY('customer_name',FONT_size,(:font_size);
i write 12 then then font size changed , then i write 18 , the size does not change. and when i write any value , no change happens. I do not know why
the second problem is how to change the font style
i made three checkbooks (bold,italic,underline)
on the trugger when_checkbox_checked i write
     IF :BOLD = 'B' THEN
     SET_ITEM_PROPERTY('N_SAMPLE',FONT_STYLE,'BOLD');
     ELSE
SET_ITEM_PROPERTY('N_SAMPLE',FONT_STYLE,'REGULAR');
     END IF;
no change happend at all.
please help

Hi friend,
it's a really really strange tip... May be it's a Forms bug? I've tried with set_item_property..and.. you're right, it doesn't work..
So.. you can try making this:
- create a visual attribute with an specific font size....
- use the
SET_ITEM_INSTANCE_PROPERTY('block.item',CURRENT_RECORD,VISUAL_ATTRIBUTE,'you_visual_attribute');
and call it from psot-change....
It works
Hope it helps,
Jose.

How to format the font in Cell when export to Excel file?

Similar Messages

Maybe you are looking for