How to format the text in a Digital Signature for a PDF in landscape orientation?

I have a custom Digital Signature plug-in which prompts the user to enter few details on a dialog and then renders the signature. Now, the problem is for a page which has PDPageGetRotate value as 90. In this case, the entire content(text) in the signature is rendered reversed i.e its displayed upside down. However, for a page in portrait mode, i.e with rotation value as 0, signature is correctly displayed.
Can anybody help me by explaining which callback/method to use to frame the text appearance? I think there needs to be some change in the parameters passed to DigSigAPCreateLayeredStreamEx, am i correct?
Let me know any comments/suggestions on this issue of correctly rendering text in a digital signature for a rotated page.

Just setup the appropriate transformation matrix.

Similar Messages

How to upload the Form 16 with digital signature to ESS?

Hi Experts,
We are not using .pfx format for digital signature. For this reason we download Form-16’s from SAP & get it signed by using 3rd party tool. Now we want the form 16 to upload in ESS. Please let me know the process to upload Form 16 to ESS.
Thanks in advance.
Regards,
Triven Kumar Reddy.

Form 16 Configuration for ESS - ERP Human Capital Management - SCN Wiki
1589254 - Form 16 central note for ADS configuration
see the PDF Form 16 (print preview) in PC00_M40_F16 transaction in ECC (R/3)

How to create the Table of Contents in Preview for a pdf file?

Does anyone know how to use the Preview to create a new table of contents or add a new link to the existing table of contents?
Thanks

Preview cannot do this - it is not a PDF editing utility. If you have the original document in an editable format (eg a Pages, or Word document) then you can edit it, print it, and from the print dialogue, save as a PDF. Otherwise you'll need the full Adobe product or similar to acheive what you want.

How to format the text in an XML file

This should be a fairly easy one. A fairly easy one that seems to be hard to actually find.
When I write out the XML file, it's all on a single line. Not a huge problem all things considered (it works), but an annoying one.
Here's the a snippet, to show what I'm doing. There's not enough information for this to actually compile, if one is so inclined, just comment out a bunch of things and have it write out aribitary data.
Is this a case where I just need to manually write the formating myself?
public void saveXML(File file){
        try{
            Document doc = DocumentBuilderFactory.newInstance().
                newDocumentBuilder().newDocument();
            //give that document a root
            Element root = doc.createElement("root");
            doc.appendChild(root);
            Command[] command=getCommands();
            for (int index=0; index < command.length; index++){
                Element element = doc.createElement("Command");
                root.appendChild(element);
                //get the name of the parser class this command should use
                String pName=command[index].getParser().getClass().getName();
                //remove everything but the last word
                pName=pName.substring(JavaMUServer.PARSER_PATH.length());
                //set the information.
                element.setAttribute("name",
                    command[index].getName());
                element.setAttribute("parser",pName);
                element.setAttribute("method",
                    command[index].getMethod().getName());
            TransformerFactory tFactory =TransformerFactory.newInstance();
            Transformer transformer = tFactory.newTransformer();
            DOMSource source = new DOMSource(doc);
            StreamResult result = new StreamResult(
                new FileWriter(file));
            transformer.transform(source, result);
        }catch (Exception e){
            e.printStackTrace();
    }

Well, that helped quite a bit. Seems however when I set the indent property, rather then indenting it just makes new lines. Rather counter intuitive.
Here's the slightly modified code (changed one line really. Tried setting a few different properties.)
public void saveXML(File file){
        try{
            Document doc = DocumentBuilderFactory.newInstance().
                newDocumentBuilder().newDocument();
            //give that document a root
            Element root = doc.createElement("root");
            doc.appendChild(root);
            Command[] command=getCommands();
            for (int index=0; index < command.length; index++){
                Element element = doc.createElement("Command");
                root.appendChild(element);
                element.appendChild(doc.createElement("sample"));
                //get the name of the parser class this command should use
                String pName=command[index].getParser().getClass().getName();
                //remove everything but the last word
                pName=pName.substring(JavaMUServer.PARSER_PATH.length());
                //set the information.
                element.setAttribute("name",
                    command[index].getName());
                element.setAttribute("parser",pName);
                element.setAttribute("method",
                    command[index].getMethod().getName());
            TransformerFactory tFactory =TransformerFactory.newInstance();
            Transformer transformer = tFactory.newTransformer();
            transformer.setOutputProperty("indent", "yes");
            //transformer.setOutputProperty("method", "xml");
            DOMSource source = new DOMSource(doc);
            StreamResult result = new StreamResult(
                new FileWriter(file));
            transformer.transform(source, result);
        }catch (Exception e){
            e.printStackTrace();

How can I copy text in Adobe Digital Editions?

How can I copy text in Adobe Digital Editions for an eBook that I have purchased?

Adobe apps can be reset to their factory defaults by using Ctrl+Alt+Shift, not Del. The rest doesn't really make any sense since you did not provide any details and authorizations can't be changed that way, anyway. If you want to transfer books to other devices you need to contact the vendors to release the DRM/ provide a new download and if you want to change the registered ID, you need to contact support or create a completely new account, which in turn will require you to buy your DRM managed books again/ get a new download as well.
Mylenium

Save metadata per digital signature field in PDF?

Hi All,
I'm looking for a way to save metadata per digital signature field in a PDF.
For example for each signature I would like to save additional string property.
Can I use XMP in this case?
Thanks in Advance!

Hi,
Yes, we have options to add digital signature to the pdf. We have one attribute called "Permissions" in "cfpdf" tag. If we provide permissions = 'AllowSecure', then system would allow digital signature for that pdf.
Please go though the docs for details info. I will post in details next.
Thanks
Chandrakant

I created a pdf form from a Word doc with 9 pt aerial font formatting; the text on the pdf form is aerial 9 pt, but the fields are formatted in courier 12 pt - How do I reformat the font in the fields??

I created a pdf form from a Word doc with 9 pt aerial font formatting; the text on the pdf form is aerial 9 pt, but the fields are formatted in courier 12 pt - How do I reformat the font in the fields??

You can set up a temporary button (or link, bookmark, etc.) and add the following JavaScript action:
// Mouse Up script for a temporary button (or bookmark, etc.)
// Change the font and font size for all text fields in this document
for (var i = 0; i < numFields; i += 1) {
    var f = getField(getNthFieldName(i));
    if (f.type === "text") {
        f.textFont = font.Helv;
        f.textSize = 9;
It also sets the font size, but you can remove that line if you don't need to do that.

How to align the text in justify format with SQL Server Reporting Services?

How to align the text in justify format In SQL server Reporting Services? Is there any code to do so?

Hi,
I'm afraid that if you want to have this kind of functionality, you will need to write a custom control. Here is an example: http://msdn2.microsoft.com/en-us/library/ms345265.aspx. The issue with custom controls is that it needs to be known by all the reportservers that will render your report.
Greetz,
Geert
Geert Verhoeven
Consultant @ Ausy Belgium
My Personal Blog

When saving a page under text format, the text is limited to 80 columns only, how to extend to 120 columns

When I save a page under text format, the text is limited to 80 columns only, how to extend to 120 columns (or more)?

HI K,
This is the Numbers (Mac OS) forum. Your question about Numbers for iOS will probably get better results posting in the iWork for iOS area. the link will take you there.
Regards,
Barry

How to display query variable in text element and format the text element

Hi All,
I want to display the value of the value of variable against fiscper3 and the value of the variable against 0fiscyear in the web application template from the query in the text element in the web template in BI 7 Web application designer.
Also, in the web application designer I need to format the text element in the web application designer to set the text element to center the display change the size and make it bold. I am bit lost I cannot find these properties in the web application designer against the text element.
Appreciate if you could kindly help.
Thanks
Karen

Hi
hope below tags would help you
Re: Search by text on a variable
Re: Need to display text part of TEXT variable in query designer
regards
nag

How to make the text in sub-division

Hi,
I am usign text module in my adobe forms.
Text in text module contains sub-divisions as a), b) and c). Each sub-division are in a separate line.
While in pdf, all the sub-division combines and comes a single paragraph.
What would be the problem for this issue? Any Idea?
May I know how to make the text in sub-division as in text module?
Thanks,
Thiyagu
Edited by: Thiyagu on Oct 26, 2009 7:08 PM

Hello, experiment with Object - Field tab. Do you have your text field with "allow multiple lines" checked? I guess so. And what about the field format? Plain text or Rich text? Please try:)) Regards, Otto

How to format a text object

Post Author: ftpaxa
CA Forum: Other
I use a SQL server DataBase on Windows server 2003 with service pack 2. i use Crystal Report 10 with ODBC connection. I read that the nice DLL is "Crdb_odbc.dll".I saw a VB code "How to format a text object" on this site :http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=crxiTechrefenpdf&sliceId=&dialogID=7686352&stateId=1%200%207680692--' Create a new instance of the report.Dim oReport As New CrystalReport1Private Sub Form_Load()' Declare a TextObject object.Dim oTextObject As CRAXDRT.TextObject' Declare a generic Object.Dim oObject As Object' Declare a Section object.Dim oSection As CRAXDRT.Section' This variable is set to true once the' text object is found.Dim bText As BooleanbText = False' Search for all the report objects in each section.For Each oSection In oReport.SectionsFor Each oObject In oSection.ReportObjects' Find the first text object.If oObject.Kind = crTextObject Then' Get the text object and exit the loop.Set oTextObject = oObjectbText = TrueExit ForEnd IfNext oObjectIf bText Then Exit ForNext oSection' Format the text object and change the text.With oTextObject.BackColor = vbYellow.BorderColor = vbRed.BottomLineStyle = crLSDoubleLine.CanGrow = True.CharacterSpacing = 125.CloseAtPageBreak = True.FirstLineIndent = 25.Font.Italic = True.Font.Bold = True.Font.Size = 14.HasDropShadow = True.Height = 900.HorAlignment = crLeftAlign.KeepTogether = True.Left = 200.LeftIndent = 750.LeftLineStyle = crLSDashLine.MaxNumberOfLines = 16.RightIndent = 250.RightLineStyle = crLSDotLine.Suppress = False.SuppressIfDuplicated = True.SetText "Hello World".TextColor = vbBlue.TextRotationAngle = crRotate0.Top = 25.TopLineStyle = crLSSingleLine.Width = 3000End With' Set the report source of the viewer and view the report.CRViewer1.ReportSource = oReportCRViewer1.ViewReportEnd SubSo, i would like to do the same thingswith winbatch language. I tried this code :;Get CrystalRuntime Application Object HandleobjCra = ObjectCreate("CrystalRuntime.Application");Logs on to on or more SQL servers or ODBC data sources.objCra.LogOnServer("Crdb_odbc.dll","Magic","xxx","xx","zzzz") ; ("DLL file", "Server", "dbname", "username", "password"); open the saved reportobjReport = objCra.OpenReport("C:\Download\Perso\Programmation\Winbatch\Crystal Report\Final\rapport exploitation - abend.rpt")objReport.DiscardSavedData()TxtObj = objReport.Sections("PHb").ReportObjects("Text11")txtObj.Text = "testing" ; *** Error on this line : 1266: Ole:Bad Param Count;Export htmlPathHTML = strcat("C:\Download\Perso\Programmation\Winbatch\Crystal Report\Final\Resultat\rapport exploitation - abend.htm")hfile = PathHTMLcre = crr.ExportOptionscre.DestinationType = 1 ; diskfilecre.FormatType = 32 ; 24 = (HTML 3.2 standard), 31 = (PDF), 32 = (HTML4.0) cre.HTMLFileName = hfilecrr.Export(BOOL:@false)objectclose(cre)objectclose(objReport)objectclose(objCra)exit--
Everythings work good except this linetxtObj.Text = "testing" I receive this error :1266: Ole:Bad Param CountI may be don't have the nice recipe. If you have a solution, it is welcome.

Post Author: KAM
CA Forum: Other
Try using SetText. Thanks.

How good is the Airport Express inbuilt Digital to Analogue converter?

How good is the Airport Express inbuilt Digital to Analogue converter?
I have just purchased a 2012 dual band Airport Express which has the combined optical/3.5mm analogue jack audio output.
This is to connect to my hifi seperate amplifier, which does not have an optical input.
This gives me a couple of options
a) just use a standard 3.5mm jack to phono cable (and use the built in DAC in the airpor express)
or
b) purchase a seperate DAC to convert the optical from the Express into phono and connect that to the amplifier
I will be sending 250-320kbps music to the airport express wirelessly.
Will I see much/any benefit in sound quality with option B vs option A?
I ask because option A is free (I already have the cable) and option B will be around £20-£30 depending on which DAC I were to buy (I would also need a new TOSlink optical cable).
These are the sort of DACs I was looking at.
Thanks, Chipstix

How good is the Airport Express inbuilt Digital to Analogue converter?
Please check out this stereophile article on the earlier AirPort Express. I understand that the newest version may use basically similar audio hardware.
I will be sending 250-320kbps music to the airport express wirelessly.
The AirPort Express Base Station (AX) works only with iTunes v4.6+ and is limited to music files that iTunes can read; ie, 16-bit data only. (An exception is you can use a third-party product like Rogue Amoeba's AirFoil to stream other non-iTunes sources.) These data, though, can be in any file format that iTunes recognizes, from lossy MP3s at the low-quality end of the spectrum to Apple Lossless and lossless AIF or WAV files at the high end. It is also important to note that the AX functions only at a 44.1kHz sample rate. When you play 32kHz or 48kHz data, iTunes sample-rate-converts the data in real time before sending it to the AX.
iTunes uses a QuickTime CODEC to convert audio files to Apple Lossless, and then, uses AirPlay to send them to the AX. In turn, the AX uses built-in software that converts the Apple Lossless to an Encoded Digital Audio format. From there, digital audio is sent to a optical transceiver to convert the electrical signal to an optical one before sending it to the innermost part of the audio port. As you already know for analog, the AX has a built-in DAC to convert the Encoded Digital Audio to Analog which is sent to the same audio port.
One operational glitch is the fact that, as the AX doesn't have a local clock circuit, when the incoming data is interrupted, as it is when you change songs in iTunes, there is no longer a digital output to feed the DAC, which loses lock as a result. Using an external DAC, which may offer better audio performance, may have issues with this glitch. Some DACs are more sensitive than others.

How to print the text in points wise in sap script

hi friends,
how to print the text in points wise in sap script.
ex: if suppose paragraph consists of 15 lines. then according to one sentence or one fullstop (.) it should give point 1. like that...
1. hai how ru.
2. what r u doing.
3.where r u.
like this i want numbering.. waiting for ur replys.
thanks,
kiran

declare a counter
data : cnt type char 4.
print :
cnt = cnt + 1.
&cnt& &text&
cnt = cnt + 1. and so on.
or.
if the data is in an internal table
loop at internal_table.
cnt = cnt + 1.
write form.
in script -&cnt& &text&
endloop.
Edited by: NIKHILKUMAR POOJARI on Nov 17, 2008 11:18 AM

How to print the text in only last but one page in sapscripts

hiiiiiiiiiii,
explian how to print the text in only last but one page in sapscripts? wher to write the code? plz if possible explain in detail with an example?

Hello,
The total no pages is given by &SAPSCRIPT-FORMPAGES& command.
So u can handle the situation in ur form like this
/: if &PAGE& = &SAPSCRIPT-FORMPAGES&
p1 TEXT
/: endif
Try in this way it may help u.
Regards

How to format the text in a Digital Signature for a PDF in landscape orientation?

Similar Messages

Maybe you are looking for