How to format this string 7414;#Butler, Heather at the same time handling the data type

I need to insert a nvarchar type column with data like 7414;#Butler, Heather into a int type column, but only with the number before the before the character ; in the mentioned string.
In the above case only 7414 needs to be inserted into the in type column of another table. This integer value need not be restricted to 4 characters. It may be 3 or 5 characters too or anything.
Any help is appreciated....

Extension of Li's sql
Try this
declare @s varchar(50)
set @s='74146;#Butler, Heather'
--set @s='74;#Butler, Heather'
Select cast(cast(substring(@s, 0, charindex(';',@s)) as CHAR(4)) as int)
--Prashanth

Similar Messages

Bug? Format choices sometimes don't agree with the data type

I discovered (while experimenting) what seems to be a small bug when editing properties of numerics:
Unless the number is in an integer representation, the special integer formats (Decimal, hex, octal, binary) are greyed out.
So let's start out with a DBL numeric control and open the properties window. We can change the representation on the "data type" tab of the properties dialog to an integer (e.g. I32), and the control immediately changes color accordingly. However, if we go back to the formatting tab, the integer specific formats are still greyed out. They should now be accessible!
Only after exiting the properties dialog and opening it again, the correct format are no longer greyed and can now be selected.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
GreyedFormats.png ‏33 KB

Thank you for bringing this to our attention. We will be notifying our Research and Development group as was this was a previous CAR that was believed to have been fixed in 2011.
-Jake B.

How to format paragraph string to show content left, Right or middle of pdf document using iTextsharp ' vb

Dear All
how to format paragraph string to show content left, Right or middle of pdf document using iTextsharp in visual basic and absolute position on the document.
Thanks

Here is one more example that i have modified the GetCell function so that you can use it for adding all the cells to the document. It takes several arguments to specify everything you need to create each cell. It now lets
you specify the Text, the Text Alignment, the Text Font and color, weather the cell shows the Border, the BackColor of the cell, and the Padding values for the Left, Right, Top, and Bottom.
If you study the code you should be able to figure out how it works. From here you can figure out the rest of what you need to do and how to use the
GetCell function.
With one quick google search for "iTextSharp Documentation" the first link to pop up was this link.
iTextSharp Documentation
Imports System.IO
Imports Its = iTextSharp.text
Public Class Form1
Private dt As New DataTable
Private Sub Form1_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
dt.Dispose()
End Sub
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
dt.Columns.Add("Name")
dt.Columns.Add("Age")
dt.Columns.Add("Birth Date")
dt.Rows.Add(New Object() {"Johnny", "23", Now.AddYears(-23).ToString})
dt.Rows.Add(New Object() {"Frank", "41", Now.AddYears(-41).ToString})
dt.Rows.Add(New Object() {"Rex", "33", Now.AddYears(-33).ToString})
dt.Rows.Add(New Object() {"Kim", "26", Now.AddYears(-26).ToString})
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim MyPdfFilePath As String = "C:\TestFolder\MyPdf.pdf"
Dim pSize As New Its.Rectangle(Its.PageSize.A4)
Dim PdfDoc As Its.Document = New Its.Document(pSize, 10, 10, 10, 10)
Dim PdfImage As New Its.Jpeg(New Uri("C:\TestFolder\MyLogo.jpg"))
PdfImage.Alignment = Its.Jpeg.ALIGN_CENTER
Dim pTable As New Its.pdf.PdfPTable(1)
pTable.AddCell(getCell("Name : " & TextBox1.Text, Its.pdf.PdfPCell.ALIGN_CENTER, Its.FontFactory.GetFont("Arial", 15, Its.BaseColor.BLACK), False, Its.BaseColor.WHITE, 10, 0, 0, 0))
pTable.AddCell(getCell("Policy : " & TextBox2.Text, Its.pdf.PdfPCell.ALIGN_CENTER, Its.FontFactory.GetFont("Arial", 20, Its.BaseColor.RED), False, Its.BaseColor.WHITE, 10, 20, 0, 0))
Dim cTable As New Its.pdf.PdfPTable(dt.Columns.Count)
For Each col As DataColumn In dt.Columns
cTable.AddCell(getCell(col.ColumnName, Its.pdf.PdfPCell.ALIGN_CENTER, Its.FontFactory.GetFont("Arial", 12, Its.BaseColor.WHITE), True, Its.BaseColor.BLUE, 3, 5, 0, 0))
Next
Dim tblfont As Its.Font = Its.FontFactory.GetFont("Arial", 10, Its.BaseColor.BLACK)
For Each row As DataRow In dt.Rows
cTable.AddCell(getCell(row.Field(Of String)("Name"), Its.pdf.PdfPCell.ALIGN_LEFT, tblfont, True, Its.BaseColor.WHITE, 3, 4, 3, 0))
cTable.AddCell(getCell(row.Field(Of String)("Age"), Its.pdf.PdfPCell.ALIGN_CENTER, tblfont, True, Its.BaseColor.WHITE, 3, 4, 0, 0))
cTable.AddCell(getCell(row.Field(Of String)("Birth Date"), Its.pdf.PdfPCell.ALIGN_RIGHT, tblfont, True, Its.BaseColor.WHITE, 3, 4, 0, 3))
Next
Using fs As New FileStream(MyPdfFilePath, FileMode.Create, FileAccess.Write, FileShare.None)
Using pdfWrite As Its.pdf.PdfWriter = Its.pdf.PdfWriter.GetInstance(PdfDoc, fs)
PdfDoc.Open()
PdfDoc.Add(PdfImage)
PdfDoc.Add(pTable)
PdfDoc.Add(cTable)
PdfDoc.Close()
End Using
End Using
PdfDoc.Dispose()
End Sub
''' <summary>Creates a new cell for the table.</summary>
''' <param name="text">The text string for the cell.</param>
''' <param name="alignment">Alighnment for the text string.</param>
''' <param name="textfont">The font used for the text string.</param>
''' <param name="border">True to show the cell border. False to hide the cell border.</param>
''' <param name="backcolor">The background color of the cell.</param>
''' <param name="padtop">The amount of padding on the top of the text string.</param>
''' <param name="padbottom">The amount of padding on the bottom of the text string.</param>
''' <param name="padleft">The amount of padding on the left of the text string.</param>
''' <param name="padright">The amount of padding on the right of the text string.</param>
Public Function getCell(ByVal text As String, ByVal alignment As Integer, ByVal textfont As Its.Font, ByVal border As Boolean, ByVal backcolor As Its.BaseColor, ByVal padtop As Single, ByVal padbottom As Single, ByVal padleft As Single, ByVal padright As Single) As Its.pdf.PdfPCell
Dim cell As New Its.pdf.PdfPCell(New Its.Phrase(text, textfont))
cell.BackgroundColor = backcolor
cell.PaddingLeft = padleft
cell.PaddingRight = padright
cell.PaddingTop = padtop
cell.PaddingBottom = padbottom
cell.HorizontalAlignment = alignment
If Not border Then cell.Border = Its.pdf.PdfPCell.NO_BORDER
Return cell
End Function
End Class
If you say it can`t be done then i`ll try it

How to Break this String and put into a Table

Hi all,
Currently i working on the Reading of Csv file.THe Csv file wil be stored as BLOB in one table.
The Format of the Csv file is
EMPCODE :DATEOFBIRTH
312089 ,12/01/1984
321456 ,03/05/1980
120212 ,04/08/1987
312456 ,23/12/1977
311110 ,12/04/1998
323232 ,20/06/1990
UPLOAD_BLOB
column Datatype
UploadId Number
File_details BLOB
And i reading the BLOB in one procedure and i m getting the String as like this ---->
"312089 ,12/01/1984
321456 ,03/05/1980
120212 ,04/08/1987
312456 ,23/12/1977
311110 ,12/04/1998
323232 ,20/06/1990"
I am Dont know how to Parse this String and put in table
While 1<STRING.LENGTH
LOOP
EMPCODE=SUBSTRING();
DATEOFBIRTH=SUBSTRING();
INSERT INTO TABLE VALID_EMPCODE(EMPCODE,DATEOFBIRTH)VALUES(......);END LOOP
VALID_EMPCODE
EMPCODE VARCHAR2(30)
DATEOFBIRTH VARCHAR2(15)
Can any one tell me how to parse this whole string and break them

Duplicate post
How to Break this String and put into a Table

How to split this string(char1)char2(char3)char4 into (char1)char2 , .. etc

how to split this string (char1)char2(char3)char4 into (char1)char2 , (char3)char4?
String[] result = "(char1)char2(char3)char4".split("\\(");I want :
result[0] = "(char1)char2" and
result[0] = "(char3)char4"
acutally char1,char2,char3, char4 ... is in the form of the below.
(any charactors except round brace)any charactors except round brace(any charactors except round brace)any charactors except round brace
I prefer String.split and Pattern.compile().split.
Edited by: iamjhkang on Feb 5, 2009 3:37 PM
Edited by: iamjhkang on Feb 5, 2009 3:41 PM

iamjhkang wrote:
especially on
?= and ?<
Thanks.The following:
(?=...) // positive look ahead
(?!...) // negative look ahead
(?<=...) // positive look behind
(?<!...) // negative look behindare all "look-arounds". See: [http://www.regular-expressions.info/lookaround.html]

How to insert some strings in a query with the clausule 'in' in a procedure

Hello fellows.
Do you know how to insert some strings in a query with the clausule 'in' in a procedure (with a variable)?.
I tell us my problem with an example:
I want to use this select but introducing a variable instead the 'value1', 'value2':
select * from table1 where field1 in ('value1', 'value2');
if I declare the variable var1 as:
TC_VAR1 CONSTANT VARCHAR2(50) := '''value1'',''value2'''
and I use it as:
select * from table1 where field1 in (TC_VAR1);
It doesn't work because Oracle takes TC_VAR1 as an all string. I think Oracle takes it as this:
select * from table1 where field1 in ('value1, value2');
If I use the data type TABLE, I don't know how to use well:
TYPE varchar2_table IS TABLE OF VARCHAR2(10);
tb_var varchar2_table;
select * from table1 where field1 in (tb_var);->It returns an error and there ins't an method that it returns all values.
A curious case is that if I have a sql script (for example script1.sh) with this query:
select * fromt able1 where field1 in (&1)
and I invoke this script as
script1.sh "'''value1'',''value2'''". It works
Can anybody helps me?.
Thanks.

Thanks to all. Really.
First, sorry for my English. It's horrible. Thank to all for understand it (my English).
I've resolved my problem with these links:
ORA-22905: cannot access rows from a non-nested table item
and
http://stackoverflow.com/questions/896356/oracle-error-ora-22905-cannot-access-rows-from-a-non-nested-table-item
At last, I have used someting like this:
DECLARE
number_table_tmp NUM_ARRAY:=NUM_ARRAY(410673, 414303, 414454, 413977, 414042, 414115, 413972, 414104, 414062);
BEGIN
FOR c1 IN (SELECT par_id, 1 acc_vdo_id FROM SIG_VIS_CAM
WHERE par_id IN (SELECT * FROM TABLE(number_table_tmp))
UNION ALL
SELECT par_id, 2 acc_vdo_id FROM SIG_ACCAO a
WHERE par_id IN (SELECT * FROM TABLE(number_table_tmp))) LOOP
NULL;
END LOOP;
END;
but first I had to create the type NUM_ARRAY like this:
CREATE TYPE subjectid_tab AS TABLE OF NUMBER INDEX BY binary_integer;
THANK YOU, GUYS. YOU ARE THE BESTS. ;-)
Edited by: user12249099 on 08-sep-2011 7:37
Edited by: user12249099 on 08-sep-2011 7:37

My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?

My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all the sounds on my phone are on, even the keyboard clicks.

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo, double check the volume button just in case. If you still can't hear the tones go into your settings>sounds and make sure the options are on.

How to resolve this problem. During ti install the new verson in my iPhone appear "The iPhone could not be restored. An unknown error occourred (1015)

how to resolve this problem. During ti install the new verson in my iPhone appear "The iPhone could not be restored. An unknown error occourred (1015)

You can't resolve the issue. Your phone is bricked.
This is the error message that happens when you try and update a jailbroken phone.
Discussion of jailbroken phones is prohibited by the Terms of Use of this forum.
You need to buy another phone.

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Hi, just got a new computer and need to move my library from the old one to the new one. Does anyone know how to do this or where I can get the information? Thanks!!

I just got a new computer and need to move my itunes library from my old computer to the new computer. Does anyone know how to do this or where I can get the information? Thanks!

If you Google ipod nano 6th generation manual, you can download the PDF manual. Here's a quote from page 19:
Transfer purchased content to another computer:
1 Open iTunes on the other computer and choose Store > Authorize This Computer.
2 Connect iPod nano to the newly authorized computer.
3 In iTunes, choose File > Transfer Purchases from iPod.
Songs that are not from the iTunes store can be copied to the new computer, and you just have to do File>Add to Library to get them into iTunes. And if you don't plan to continue using your old computer, you should deauthorize it because you only get 5 authorizations for iTunes store purchases, and this will cancel out the authorization on the old computer.

How to use Call library function node for a function in dll with VOID data type

Hi All,
I would like to ask for your kind help,
I am facing an issue with the call library node.
I have a C++ function(stdcall), which has void as data type
error code XXXX(hwnd, lID, getValue, *void data1, *void data2)
the data1 and data2 types are always changing depending upoin the value of "getValue".
Primarily i can use call library node multiple times and adapt each node according to the data types of data1 and data2, and extract the values and use in the code. Here is no issue. Real question is:
My question:
How can i just use one time call library node and make a case depending upon the "getvalue", which will control the data type of data1 and data2. Here i really looking for solutions.
My trials:
i used varaints as input to the call libray node for data1 and data2, and selected Parameters in call libraby node as " Adapt to type". here labview just crashed.
i really appreciate your feedbackand suggestions.
Thanks
Kutbuddin
Solved!
Go to Solution.
Attachments:
Clipboard02.jpg ‏103 KB

A variant is a very specific LabVIEW datatype (really a C++ type object internally) and trying to pass that to a function, which excepts a flat memory pointer there, for sure will crash very quickly.
As to endianess, yes Unflatten will be able to adjust for endianess, which in this case however is most likely exectly NOT what you want. So make sure that the you select native type for the endianess input on Unflatten from String. LabVIEW internally works with whatever is the native endianess, as will most likely your C++ DLL. The platform independent big endian format does only come into play when you receive data streams over some streaming interface like a network connection. Here it is desirable to use an endian format that is independent from the actual platform that generates and consumes the data stream. LabVIEWs default endianes is big endian here.
But as long as you pass data directly to native components like DLLs there is no difference in endianess between what LabVIEW uses and what those components use.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Smart Album : Inconsistency in the Date Type format used inside Aperture ?

Hello,
After using Aperture 2.0 for some days, I tried to create a Smart Album using as creation option for the Album the Date + "is in the Range" option which is leaving two blank fields for filling the two dates which are supposed to be the date limits of the pictures that the user wants to select.
My OS X is set to the italian language so our date format is the dd/mm/yy type.
When I tried to insert some dates in our format (dd/mm/yy) the SmartAlbum seemed to not work at all (not selecting any picture, or was coming out with weird results).
After checking carefully that there was no filter set which could prevent the correct visualization of the pictures I had no explanation for the problem.
At first I thought that this specific option was buggy as the other Smartalbum creation options (Keywords etc.) seemed to work properly.
Then I had the idea and I tried to use the english format (mm/dd/yy) for the two dates inside the date range fields and to my surprise everything worked properly.
So basically it seems that Aperture recognises the dates correctly only giving in input the american date format mm/dd/yy.
What is not so noice is that there is no check on the date limit correctness so basically it is possible to really mess up with the dates.
I'm also actually surprised the Aperture doesn't complies with the OS X date type which could seem the logical thing to do or at least is not consistent with the date type management inside the program because for example the pictures Dates are instead correctly listed in the List View of the browser according to the OS X date type (dd/mm/yy).
I was wondering what is happening in countries where the date separator is not the "/" but the "." like typically used in Germany which would add another variable to the software routine which is interpreting the date input fields.....
Maybe this could help other non english users who could have been confused like me on the same issue....
Did you notice the same behaviour ? Am I missing something ?
Uby

Smart Albums will search in the Folder/Project that is shown at the top of the search HUD as well as all Folders and Projects "below" in your structure. However, it will not search through any Albums in that structure. Here is an example:
You images are always stored in Projects (yellow icons) and lets say this is how it looks:
FolderA/ProjectA (this Project stores: ImageA1, ImageA2)
FolderA/ProjectB (this Project stores: ImageB1, ImageB2)
Let us say that you have two Albums like below but there is an image from ProjectB in AlbumA, which looks like this:
FolderA/ProjectA/AlbumA (this Album has pointers to: ImageA1, ImageA2, ImageB1)
FolderA/ProjectB/AlbumB (this Album has pointers to: ImageB1, ImageB2)
If you create a Smart Album below ProjectA it will only show ImageA1 and ImageA2 since it only search ProjectA and not AlbumA.
This may be the issue you have.
Are you 100% sure that the Project your Smart Album is pointing at does include the images you are trying to search through. As you see above then it won't find them if they are only in the albums below that project.
Here are a few rules that I follow in order to avoid getting confused over where my images are located: A) Only include images in albums below a project that are stored in that project. B) Create all my smart albums at top library level and if necessary add extra filters like project name.
Hope you understand.
Karsten

How do I detect the data type of a node?

Hello all,
I have a few quick questions about using Schema with XDK. I hope someone can answer this for me.
1) How do I detect the datatype of a node? I need to be able to detect if it is date/time, number or boolean
2) How do I then parse the string into date, number, etc. ?
3) Does Oracle SOAP also support this kind of thing? (ie. detecting the data type of a node and then parsing it?)
4) Does XDK support inline schema?
thanks in advance!

Thanks for the response.
So are you saying that it is not possible or not easy to detect the typed value data type of a node? In past years, I have had experience with converting based on what looks like a number and it is impossible to safely assume something is a number just because it looks like one. For example a Product ID could be: 14E1 which many routines would detect as a scientific notation number. This is why I need to be able to detect the data type.
But I am no Schema expert, but my understanding of schema is that simple types have standard designations. I think it is something like xsd:string or xsd:number, etc. But no matter what parser I look at them all seem to be implemented the same way and I can't figure out with any of them how to detect the datatype and then parse it appropriately. But it should be possible since it is written into the schema.
Since I'm using Jdev I'm hoping that the Oracle XDK can do this, if not does anyone know of any good parsers that can? I'm having trouble even locating validating parsers. Aside from Oracles all I could find were IBMs and Xerces which both seem to be based on the same thing anyhow.
Help or pointers in the right direction would be much appreciated since I have been struggling with this seemingly simple task for a long time.

How to lock multiple user for a transcation code at same time is der any tc

how to lock multiple user for a transcation code at same time is der any tc
suppose i hav 15 user and i want to lock 10 user for mm02 who can i to it

Basis can do a export and import transport, still if don't have connection between boxes.
or
check this
http://www.sap-basis-abap.com/abap/copy-program-variants-from-one-to-another.htm
a®

How to print both letter and legal size docs at same time with two trays

I have an HP Laser Jet P2055dn printer. How can I print both letter and legal docs at same time?

Not quite sure what you mean by "print both letter and legal docs at same time".
If you mean that sometimes you want to print a document on Letter size paper, and at other times you want to print a different document on Legal sized paper, then all that is neccessary is to ensure that:
The printer knows what Paper Size (e.g. Letter or Legal) is present in each tray; on many LaserJet devices, the size is detected automaticaly by sensors in each tray (except for the drop-down tray), but some devices may require that you set the size via front panel menus, or (for network models) via the Embedded Web Server equivalent.
You may also need to specify what Paper Type (e.g. Plain or Letterhead) is present in each tray, in order to distinguish between two or more trays which have the same paper size loaded.
Within your appllcation / print preferences, ensure that you select the required combination of size and type for the document.
But if you mean how do you print a document with some pages on one size of paper, and other pages on a different size, this may only be possible with bespoke applications and/or printer drivers.

How to format this string 7414;#Butler, Heather at the same time handling the data type

Similar Messages

Maybe you are looking for