HOW TO: From BK7 discharge to 700 in 24 months or less!

The logic behind it is for recon purposes. IME, the CSRs are slammed Monday from all the apps/problems over the weekend and sometimes that bleeds over in to Tuesday morning. If you app Tuesday afternoon/Wednesday, you have a better chance of getting someone live on the phone Weds/Thurs if you need them. Moreover, Mondays and Fridays are the most likely days for supervisors/csrs to "take off" due to illness/vacation/whatever. So Tuesday/Wednesday/Thursday (Wednesday in particular) would have a higher likelihood of a fully staffed call center.
Basically, it boils down to not having to wait for the recon if you need it. That's it, nothing too special.
Cheers,
-SM
(Note: NFCU is different, they recon all weekend, but their recon is them calling you if you aren't immediately approved.)

If you're going to follow THIS guide, please DO NOT get a SECURED/STORE card.  This guide is designed with patience in mind, and pays off over time.  Every single person (there have been hundreds) who has followed this plan to the letter has a 700ish score INSIDE 24 months.  Most people who take it upon themselves to "cheat" or do one of those-"but I thought it would help"-things wind up stuck with low scores, low limits or worse.  This guide works, just be patient and give it a chance. UPDATE: On 7/15-ish I adjusted this guide to remove the Orchard Bank References... they were out of date now that HSBC no longer offers the Orchard Card.  - Now that I'm using CreditOne in it's place, there may be confusion between CreditOne and CapitalOne.  Please read carefully so you don't accidentally make a mistake.  - Cheers!  -SM Hey all, I wrote this for a friend who went through a BK recently... it outlines the steps I took.... I'm @ 18 months post BK in 3 days and expect that when my Zero + 9% balances report this month I'll be somewhere between 675 and 685, roughly 15pts away from my 700 goal with 6 months to go. Any how, it's written as "you" and for someone living in NV (OneNevada CU reference), but this method really does work quite well:  ETA: Posters note:  I am sure there are other ways to do this, and differing opinions about secured cards, balances, etc.  I'm not saying that this is the ONLY way to rebuild after BK7, what I'm saying is that this plan WORKS. ********************** Steps to rebuild after BK - Goal: 700 FICO 24 months or less after BK. Pre-Step 1.  Sign up for a Scorewatch subscription from MyFico.com so you can track your progress (http://www.myfico.com/Products/Products.aspx) It's the middle one, and is $14.95/mo.  Do NOT pull your second SCORE POWER report until month 6.  Set this up on your debit card until you get your Orchard Card (see below).  Note: The score analyzer on MyFico doesn't seem to work if you have a BK, but it's fun to play with.  You can pull a fresh, full score power every 6 months if you like. If you want, once you have Score Power, you could check your FICO on your TU report as well, but don't monitor it, just pull it once. There are NO other sites that you can pay for that will give you a true FICO score.  They all sell FAKOs and are even more worthless than FICOs. Fixing your credit report (in other words, making sure that all IIB accounts report as IIB): 1. Pull a copy of your 3 credit reports from www.annualcreditreport.com.2. Run through with a pen and make sure that ALL accounts that were included in bankruptcy are noted as:a. Zero Balanceb. Included in Bankruptcyc. Current (not "default/derogatory" status"3. For any accounts that do not meet all of the criteria in #2, file a dispute "Included in Bankruptcy" and "Incorrect Balance"note: Disputes need to be done with ALL 3 Credit Reporting Agencies(CRA), see far below on how to do this. Include a copy of your discharge letter once you have it. You can include multiple inaccuracies in the same letter, but if you do that, make it a list/spreadsheet rather than paragraph format.  Mail the 3 letters to each CRA (addresses below) CERTIFIED MAIL, RETURN RECEIPT REQUESTED (CMRRR).4. Once you get your receipts back, wait about 30 days for the results.  For anything that wasn't updated to the correct info, get the creditor info from your report and mail a letter to them, including ONLY the account for that creditor.  Send this letter CMRRR as well. Example:5.a At the same time, send a "Method of Verification" letter to the CRA, including a copy of the result sheet they mailed you, with the questionable accounts highlighted.  Example: http://www.gimmelaw.com/legal-form-credit-repair-method-of-verification-demand6. Wait 30 days from the day you get the receipt.7.  At this point the bad stuff should all be pretty much gone (or reporting correctly), even if it's not, it's probably best to just leave it alone.  Rebuilding/Reestablishing credit (some of this is at the same time you're doing the stuff above): 1.  15 days after you get your CMRRR receipts back from step 3, above, apply for a CreditOne card.a. http://www.creditonecards.com/pre-qualification.php
b. You do NOT want a SECURED version of this card.  If that's all they'll offer you, decline it, wait a couple months and try again.  Alot of people might tell you that secured cards are OK, but they aren't.  From the evidence I've seen, it's more difficult to swtich from a secured card to an unsecured than it is to go from a bad bank (like Credit One or First Premier) to a better unsecured.  Worst case scenario, get a secured card from a Credit Union/Bank that you are 100% CERTAIN will graduate to an usecured version in 12 months. 2.   The DAY AFTER you receive and activate your Credit One Card, go to a OneNevada Credit Union branch and open a $1000/1year CREDIT BUILDER loan (if you do not already have a savings/checking with them, you'll need to open one of those, too. (www.onenevada.org) - (If you do not live in Nevada, find a different credit union/bank that offers a Credit Builder-type product). 3.  Use your CreditOne Card for <10% of it's balance/month and Pay In Full(PIF) as soon as you get the bill.a. In other words, if your limit is $300, do NOT charge more than $29/month on the card. EVER.b. If there is an activation/processing charge, that's you're first month's purchase.c. PIF the day you get the bill, not the day it's due.d. An easy way to do this is to set up your MyFICO Scorewatch subscription to use your Credit One bank card instead of your debit card. 4. 5 months after activating the card from Step 1, get a Capital One card.a. https://www.capitalone.com/ - This link will take you to the pre-qualifier, which is a good place to start.  Say you have average credit.b.  Get the QuicksilverOne Rewards card for Average Credit (it has a $39 AF)c. Capital one will enroll you in the Credit Steps program on this card, watch for the letter, it's an auto CLI @ 5 or 6 months. 5.  Change your purchasing patterns:a. Charge $1 or so on the CreditOne Card every month and PIF when the bill cuts (just to keep it reporting)b. If you did step 3.d, change the MyFico auto-bill to your new CapitalOne card.c.  Charge up to 30% of the limit of your Cap1 card and PIF every month when the bill cuts. 6.  When you get your Credit Steps Credit Line Increase (CLI):a. That month DO NOT use your CreditOne Cardb.  Pay your Cap1 card down to a $10 balance BEFORE the statement cuts. (you can do this online, make sure you leave $10 on your card… it's important.) 7.  11 Months after opening your CreditOne Card (6 Months after opening the CapitalOne card, after you get your CLI):a. If you did NOT burn Discover Card in your BK, Apply for a DiscoverIT card (www.discover.com), take whatever counter-offer they give you. (www.discovercard.com)b. If you DID burn Discover, Do step 10 right now, then move to step 8. Or, instead of applying for a DiscoverIT, app for the Walmart Discover, which is issued by GE Money Bank. (http://www.walmart.com/cp/Credit-Cards/632402) 8.  When your CreditOne Card has a Zero Balance (and is reporting that way), it's time to cancel the card.  You should have had it for 11 months by now.  Cancel it immediately before the end of month 12 to avoid the annual fee. 9. It should now be 12 months after you got your Credit Builder loan, which means it's over.  Put the cash in savings and go back to OneNevada(or wherever you got it).  If they will let you get a $1000-$2000 UNSECURED 2 year loan, do that.  If not, get a new Credit Builder loan, this time $2000 and 2 years.10.  2 months after you get your Discover:a. Apply for a Barclays Apple Financing Visa (don't worry, you don't have to buy anything Apple when you get it).b.  http://store.apple.com/us/instant_credit  You should now have the following cards in your wallet and be about 12-13 mo out of your BK:1. Capital One (7 months old)2. Discover (2 months old)3. Barclays Visa (Brand New) If you've done everything right, your FICO should be between 650 and 680. It should also be time to pull your reports from www.annualcreditreport.com again.  Look for / dispute anything inaccurate. Use your credit cards sparingly over the next 6 months, charging small things on them and paying in full each month.  Do NOT exceed 30% of your total available credit at any time.  For example… if you need to charge $900 for something, and you have 3 cards that each have a $1000 limit.  Pay off all your cards, put the $900 on one of them, and don't use the other two that month. Always PIF the day the statement cuts, never charge anything that you couldn't just pay cash for. To maximize your score, Pay 2 cards to ZERO, BEFORE their statements cut and pay the third card down to <10% of your total available credit BEFORE it's statement cuts.  This forces 2 cards to REPORT zero balances, and the third to REPORT a small balance, which is the optimal credit formula. Once you've had your Barclays for 6 months (and not a DAY sooner!) you may apply for additional credit if you like.  If you are eligible to be a member of Navy Federal Credit Union, join them and app for the nRewards Visa + NavCheck (Overdraft Line of Credit).  If not, you might want to ask OneNevada (Or your credit union) if you Q for one of their cards with the BK on your record, or you could get a Walmart Discover or something… There are several cards / loans to choose from at this point, pick one you like. Note: Chase / AMEX / Citi will NOT approve you with a BK reporting, don't even bother.  Also, you might want to avoid anyone you included in your BK for a couple more years. Please note, you do not HAVE to apply for anything.  The cards from Discover and Barclays will grow with you over time, so instead of applying for anything, you might want to call Discover (which you've now had for 8 months) and ask them for a Credit Limit increase.  You can do the same with Barclays too, since it's 6 months old now.  You may notice inquiries on your credit reports when you ask for CLIs, but these aren't bad since you have limited your inquiries for the last 18 months. (you may see a slight score dip, but it will come back in 3-6 months). Don't apply for anything else for the next 6 months… just let time do it's thing. In FEB 2012 pull your reports from annualcreditreport.com again, look for/dispute any inaccuracies. In April of 2014, it will be 2 years after your BK discharge.  If you pay down all your balances but one BEFORE the statements cut, and pay that one down to <10% of your TOTAL available credit BEFORE the statement cuts, you'll have an optimized credit score.  It should be 700 or so, plus or minus 15 points. Keep using credit wisely and your score will only go up from where you are.  As a note, I have $3550 of available credit.  I use my Discover card to buy gas, have a couple of auto-payments going to my C1 and my Barclays, and NEVER carry a balance.  I pay cash/debit for everything else.  Also, I normally pay my cards to zero BEFORE the statement cuts, so they report no balances.  NOTE: Always apply for credit on a Tuesday or Wednesday around noon.  If you are DECLINED, immediately call for Reconsideration: http://ficoforums.myfico.com/t5/Credit-Cards/Backdoor-Numbers/td-p/408066  The dispute process:Helping YourselfStep 1: Tell the consumer reporting company, in writing, what information you think is inaccurate. Include copies (NOT originals) of any documents that support your position. In addition to providing your complete name and address, your letter should identify each item in your report you dispute; state the facts and the reasons you dispute the information, and ask that it be removed or corrected. You may want to enclose a copy of your report, and circle the items in question. Send your letter by certified mail, “return receipt requested,” so you can document that the consumer reporting company received it. Keep copies of your dispute letter and enclosures.
Your letter may look something like the one below.Dispute Sample Letter:http://www.creditinfocenter.com/forms/sampleletter5.shtmlConsumer reporting companies must investigate the items you question within 30 days — unless they consider your dispute frivolous. They also must forward all the relevant data you provide about the inaccuracy to the organization that provided the information. After the information provider receives notice of a dispute from the consumer reporting company, it is required to investigate, review the relevant information, and report the results back to the consumer reporting company. If this investigation reveals that the disputed information is inaccurate, the information provider has to notify the nationwide consumer reporting companies so they can correct it in your file.When the investigation is complete, the consumer reporting company must give you the results in writing, too, and a free copy of your report if the dispute results in a change. If an item is changed or deleted, the consumer reporting company is not permitted to put the disputed information back in your file unless the information provider verifies that it is accurate and complete. The consumer reporting company also must send you written notice that includes the name, address, and phone number of the information provider. If you ask, the consumer reporting company must send notices of any correction to anyone who received your report in the past six months. You also can ask that a corrected copy of your report be sent to anyone who received a copy during the past two years for employment purposes.If an investigation doesn’t resolve your dispute with the consumer reporting company, you can ask that a statement of the dispute be included in your file and in future reports. You also can ask the consumer reporting company to provide your statement to anyone who received a copy of your report in the recent past. You can expect to pay for this service.Step 2: Tell the creditor or other information provider, in writing, that you dispute an item. Be sure to include copies (NOT originals) of documents that support your position. Many providers specify an address for disputes. If the provider reports the item to a consumer reporting company, it must include a notice of your dispute. And if you are correct — that is, if the information is found to be inaccurate — the information provider may not report it again. EquifaxP.O. Box 7404256Atlanta, GA 30374-0256 ExperianDispute DepartmentP.O. Box 9701Allen, TX 75013 TransUnionConsumer SolutionsP.O. Box 2000Chester, PA 19022-2000

Similar Messages

  • Contact from my phone book just disappeared.dont know how ..and it happen second time in 1 month time. Apple customer service in India is crap... Sorry to say but 700 contacts got disappeared.can someone tell me how to get this contacts back on my phone.p

    contact from my phone book just disappeared.dont know how ..and it happen second time in 1 month time. Apple customer service in India is crap... Sorry to say but 700 contacts got disappeared.can someone tell me how to get this contacts back on my phone.plz

    the same problem happened to me also, i felt that while playing hay day, if some calls came in between and if i answered the call, the setting of all the icloud items turns off. (i have backup of all the items on icloud), after deleting the account and making settings of mail, contact, calander etc on on mode and after rebooting the phone, it again download from icloud server. but it is just a headache. do not know how to handle this.

  • I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

    I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

    jpqcampos wrote:
    This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
    You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
    And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
    Here are the two tables, Data on the left and Summary on the right. Notes below.
    The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
    Data table:
    D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
    D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
    D3 (and filled down the rest of column D):   =AND(OR(B2,C2),NOT(OR(B3,C3)))
    The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
    Summary table:
    Column A contains labels for the age ranges to be counted.
    Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
    C2 (and filled right to column D, then both filled down to row 5):
        =COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
    Two changes from the previous example:
    COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
    The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
    See note below regarding my earlier formula.
    When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
    Close the reorganize pane, and the 'data entry form' is ready to use.
    To use, enter the age first, then check one of the boxes.
    As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
    Regards,
    Barry
    Note regarding formula in my earlier post:
    The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
    In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
    Fill down to E8.
    Ignore the instructions (in that post) following "Fill down to E8."
    B

  • How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

    How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

    You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
    Product updates

  • How requirements from SOP are transferred to Demand Management

    How requirements from SOP are transferred to Demand Management? what is transaction code for it ?
    Madan S. Rode

    Hi,
    In mc82 view, after checking the capacity situation(By choosing view, capacity situation, show) you can check the load for that particular resource. Once the load is 100 %. You can save it.
    Use mc78, copy the inactive version no to active no. (a00).
    Then in mc82 view, go to Extras,
    transfer to demand management,
    Choose the strategy as LSF/VSF... according to your scenario & then click transfer.
    Regards,
    Senthilkumar SD

  • How scan from HP Office Jet Pro 8600 to iPhoto?

    How scan from HP Office Jet Pro 8600 to iPhoto on iMAC?

    Hello AlisoCreek,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Mac Basics: Using a scanner
    http://support.apple.com/kb/ht4505
    Have a nice day,
    Mario

  • How execute from procedures

    Hello !!!
    How execute from procedure the next:
    @oem_exec_template.sql MY_RUNTIME MY_WAREHOUSE PLSQL MY_MAPPING "," ","
    because I execute from crons tabs
    hepl

    Hi,
    do you want to use PL/SQL?
    Then take a look at WB_RT_API_EXEC.RUN_TASK (see http://download.oracle.com/docs/cd/B31080_01/doc/owb.102/b28225/api_4sqlforjobs.htm#BABFFCHB).
    Regards,
    Oliver

  • How and from where do I download UPK 3.1.7 ???

    Hello All,
    How and from where do I download UPK 3.1.7? We need that for Oracle HRMS impementaion documentation.
    Thanks,
    Bhushan Kumar.

    How and from where do I download UPK 3.1.7? We need that for Oracle HRMS impementaion documentation.UPK Download
    UPK download
    UPK Download
    http://forums.oracle.com/forums/search.jspa?threadID=&q=UPK+AND+Download&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How return from safari 6 to safari 5?

    how return from safari 6 to safari 5?

    I have mountain Lion, it won't run Safari 5.04, I'm not sure how to get 5.1.7
    I can't use Safari 6, it is missing critical features like the Activity Window, and won't scroll properly! Ugh.
    Like I can't scroll Facebook at all, I had to download Firefox just so I could have a browser I can use.

  • How to from more than one delivery note - conversion into one invoice

    Dear Experts,
    How to from more than one delivery note - conversion into one invoice?
    Thanks and best regards,
    Wilson Hong

    Dear Wilson Hong,
    Single invoice for multiple deliveries will takes place based on these criterion
    1.If you want single billing document for multiple deliveries these data should be same in all order for all items.
    -> Payer
    -> Inco term
    -> Payment term
    -> Actual GI Date from Delivery
    -> Shipping Condition
    -> Account Assignment Group
    -> Exchange rate (in case of export sale order)
    -> Foreign trade data.
    2.In addition to this you need to maintain proper copy control settings between delivery and invoice.
    Go to VTFL transaction input your delivery type and invoice type then go in to the item level settings here you find field Data VBRK/VBRP maintain this field with routine 3-Single invoice.
    If the above data and settings are exists you can do single invoice for multiple deliveries.
    I hope this will help you,
    Regards,
    Murali.

  • I have take a back up through icloud where it will be showing and how restore from icloud

    i have take a back up through icloud where it will be showing and how restore from icloud?

    Hey SAJEEV SAJI!
    I believe this article will help answer this question for you:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • I canot use air print or dont know how to from my iphone 4s

    i canot use air print or dont know how to from my iphone 4s

    http://www.apple.com/support/iphone/assistant/airprint/

  • How  to  get the FIRST DAY OF THE CURRENT MONTH

    how to get the FIRST DAY OF THE CURRENT MONTH in oracle 9i.
    plzzzzz send immedaily.advance thanks

    TEST@test SQL> select trunc(sysdate,'MON') from dual;
    TRUNC(SYS
    01-OCT-06
    TEST@test SQL>                                  

  • I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it.  What could this come from?  Is there a simple solutions to this problem?

    I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it.  What could this come from?  Is there a simple solutions to this problem?

    Which model iMac do you have?  http://support.apple.com/kb/HT1758 How to identify iMac models 
    Which OS is currently installed? 
    Check out KB Articles:  http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC) and http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM 
    If not of the above works and you have AC, call them.  Let them deal w/it.  Otherwise, take your iMac down to your local AS or an AASP.  Diagnostic testing is FREE! 
    You can also research for a solution on YouTube's "How To" website and iFixit. 

  • [SOLVED]How to get colorful output when pipe yaourt's STDIO to less?

    Hello, second post to NC.
    My question is how to get a piped(e.g. pipe yaourt's STDOUT to less) program's colorful output on screen without such option like '--color=always'.
    Before post this, I've configured less's default behaviour in "~/.zshrc" with following
    less() {
    env LESS=R less "$@"
    And When I run:
    $ dmesg --color=always | less
    Everything works fine(I get good, colorful output), but when I run this:
    $ yaourt -Qe --date | less
    Seems that I can only get grey output on terminal emulator (without 'less' I get colorful output).
    Does anyone has idea about getting yaourt's colorful output with 'less' ?
    Last edited by izmntuk (2014-06-08 00:15:15)

    Thanks for reply and after serveral mintues googling & getting some help from IRC:
    It seems that there're some utilities that do not provide such a option like 'color=always', what we need to do is trick these utilities into thinking their's STDIO is to a tty, not a pipe.
    1. stdoutisatty way (aur/stdoutisatty-git is needed) from [0]:
    $ stdoutisatty yaourt -Qe --date | less
    2. socat way (extra/socat is needed, sometimes doesn't work fine) from [1]:
    $ socat EXEC:"yaourt -Qe --date",pty STDIO | less
    3. script way (sometimes doesn't work fine) from [2]:
    $ script -fqc 'yaourt -Qe --date' | less
    4. unbuffer way (extra/expect is needed) from [3]:
    $ unbuffer yaourt -Qe --date | less
    5. zpty way (extra/zsh is needed) slightly modified from [4]:
    zmodload zsh/zpty
    autoload colors && colors
    pty() {
    local VERSION=0.2
    if [[ -t 0 && $# -ne 0 && ${1} != '--help' ]];then
    zpty pty-${UID} ${1+"$@"}
    ## when piping function pty to a pager, it may be a good idea to disable ^C *in this function*. assume that you're going to run this command: pty ls -alRi --color | less
    ## and now you enter a pager, and you press the End key by accident, and the pager seems stuck, and to get unstuck you pressed ^C, then the entire function interrupted. so to avoid the interrupt:
    if [[ ! -t 1 ]];then
    setopt local_traps
    trap '' INT
    zpty -r pty-${UID}
    else
    zpty -r pty-${UID}
    fi
    zpty -d pty-${UID}
    elif [[ $# -eq 1 && ${1} == '--version' ]];then
    print "pty v${VERSION}"
    else
    _-automatic-colored
    print "${bldblu}Usage: ${bldgrn}pty${rst} ${bldcyn}command${rst} [${bldcyn}argv${rst}...]
    wrapper function to run a program under pseudo-terminal
    ${bldcyn}--help${rst} print help message
    ${bldcyn}--version${rst} print version"
    fi
    ptypg() {
    if [[ -t 0 && $# -ne 0 && ${1} != '--help' ]];then
    pty $@ | pg
    else
    _-automatic-colored
    print "${bldblu}Usage: ${bldgrn}ptypg${rst} ${bldcyn}command${rst} [${bldcyn}argv${rst}...]
    wrapper function to run a program under pseudo-terminal and view its output in pg
    ${bldcyn}--help${rst} print help message"
    fi
    _-automatic-colored() {
    if [[ "${1}" == unset || ! -t 1 ]];then
    unset rst bld bldwht bldblk bldred bldgrn bldylw bldblu bldcyn blk red grn ylw blu cyn gry
    return 0
    elif [[ -t 1 ]];then
    rst="${reset_color}"
    bld="${fg_bold[default]}"
    bldwht="${fg_bold[white]}"
    bldblk="$fg_bold[black]"
    bldred="$fg_bold[red]"
    bldgrn="$fg_bold[green]"
    bldylw="$fg_bold[yellow]"
    bldblu="$fg_bold[blue]"
    bldcyn="$fg_bold[cyan]"
    gry="${fg[white]}"
    blk="$fg[black]"
    red="$fg[red]"
    grn="$fg[green]"
    ylw="$fg[yellow]"
    blu="$fg[blue]"
    cyn="$fg[cyan]"
    return 0
    fi
    $ pty yaourt -Qe --date | less
    $ ptypg yaourt -Qe --date
    And if there are any better implementation please leave a comment add it to wiki .
    Last edited by izmntuk (2014-08-19 14:18:45)

Maybe you are looking for