How to generage pop up screen on selection screen of report program?

Hi Guys,
I am having a requirement to generate the pop up screen on the selection screen of the report program.
Suggest me the best one with model program

Hi Chakradhar,
Refer this code :
SELECTION-SCREEN BEGIN OF BLOCK BL2 WITH FRAME TITLE TEXT-456.
PARAMETERS PO RADIOBUTTON GROUP RADI USER-COMMAND R.
SELECTION-SCREEN END OF BLOCK BL2.
AT SELECTION-SCREEN OUTPUT.
CALL SCREEN 100.
when user will click on this radio button , a pop up screen will appear dynamically.
Reward points if helpful.
Regards,
Hemant

Similar Messages

Detailed pop up screen in selection screen - urgent

hai experts,
how can we give a detailed pop up screen in selection screen.
My requirement is,
To display Details of spool Nos taken for current porogram to take print out from end user.
from OWN SPOOL REQUEST displays all other programs........
can any one give a right solution?
reward will avail for use full answer.
thanks in advance.
regards,
jai.m

Hi Jai
May be you can use this FM POPUP_WITH_TABLE_DISPLAY_OK with the list of spool number populated into internal table.
If you are particulary looking for selection screen, then decalre your selection screen as below
Selection-screen begin of screen 9000.
Selection-screen end of screen.
Then use the statement Call selection-screen 9000 starting at x y.
Hope this helps !
Regards
Ranganath

How to pass a default value in selection screen of logical database pnpce

Dear All,
Can any one tell me how to pass a default value in selection screen of logical database pnpce .
Regards
Rakesh Singh

Hi Rakesh,
Go to SE36 (logical database Builder).First enter PNPCE in Logical Database and press documentation,here you will get the details of exactly what is PNPCE and how it works.After that select selections in subojects in se36 only and enter display ,there you have the include from where you acn get the idea.
Regards,
Rahul

How to Improve the performance in Variable Selection Screen.

Hi,
In Query Level we have Variable " User entry Defalt Valu". User want select particular value when he press "F4" it's take hours time how to improve the performance in Varaible Selection Screen.
Thanks in Advance.
Regards,
Venkat.

Dear Venkat.
You please try the following steps:
1. Say the InfoObject is 0EMPLOYEE against which you have created the variable, which user is trying to select value against, when they execute the report.
2. Goto RSA1-> InfoObject tab-> Select InfoObject 0EMPLOYEE.
3. Selcet the following options:
Query Execution Filter Val. Selectn - 'Only Posted Value for Navigation'
Filter Value Repr. At Query Exec. - 'Selector Box Without Values'
Please let me know if there is any more issue. Feel free to raise further concern
Thnx,
Sukdev K

How to set Screen type "Selection Screen" in Dialog program

Hi Experts,
I have copied a screen 400 from a program into my program. In that screen in source program, the screen type was defined as 'Selection Screen'. After i copied that screen into my program, the screen type Selection Screen option is disabled. How to set the screen type of a screen to Selection Screen.
I am currently getting the following error
"Error when generating the selection screen "0400" of "Ztest_screen ".
I tried running the generation program RSDBGENA. There the diagnosis was given as follows:
When generating the report Ztest_screen and its selection screen, an existing screen 1000 (not a selection screen) was overwritten.
The selection screen was defined as follows:
SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
PARAMETERS: p_werks TYPE werks_d OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blck1.
SELECTION-SCREEN END OF SCREEN 400 .
I am calling the screen 400 with selection screen declarations in PBO of screen 0100.
CALL SUBSCREEN sub_scr INCLUDING 'Ztest_Screen' '400'.
Where am i going wrong? Your inputs are needed.
Thanks

Thanks Przemysław and Nabheet for your suggestions.
I had copied the generated screen 400 also from the source program into my program. This was the error. I deleted that and the report got activated now.
Both the source and destination programs are not module pool. They are executable programs.
Thanks

How to provide F4 help in a selection screen

Hi..
   How to provide F4 help in a selection screen for a particular field using
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'.
Thanks in Advance.
Regards
Raj Kumar

AT SELECTION SCREEN
at selection-screen on value-request for s_contr-low.
Get contract (low value)
perform get_contract changing s_contr-low.
form get_contract changing p_contr .
types: begin of ty_ycontract,
           ycontract type xchcontract-ycontract,
           lifnr     type xchcontract-lifnr,
           ycontdate type xchcontract-ycontdate,
           ycont_end_dt type xchcontract-ycont_end_dt ,
         end of ty_ycontract.
data: ds_returntab   type ddshretval,
        dt_returntab   type table of ddshretval,
        dl_fieldname     type dfies-fieldname.
data: dt_ycontract type table of ty_ycontract.
select ycontract lifnr ycontdate ycont_end_dt
    from xchcontract
    into table dt_ycontract.
if sy-subrc = 0.
    clear dl_fieldname.
    dl_fieldname = 'YCONTRACT'.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
      exporting
        retfield        = dl_fieldname
        value_org       = 'S'
      tables
        value_tab       = dt_ycontract
        return_tab      = dt_returntab
      exceptions
        parameter_error = 1
        no_values_found = 2
        others          = 3.
    if sy-subrc = 0.
      clear ds_returntab.
      read table dt_returntab into ds_returntab index 1.
      if sy-subrc = 0.
        p_contr = ds_returntab-fieldval.
      endif.
    endif.
endif.
endform.

How to Remove the underline from the selection screen parameter

How to remove the underline from a selection screen parameter ?

>
Anoop Menon wrote:
> hi Avinash,
>
> I am not able to understand the use of the 'comment line properly.
>
> The last part of the statement which says modif id is confusing.
>
> Please clarify..... I am unable to activate my code when I put the selection screen commebnt statement.
Use this and update it to your requierement !
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 1(30) comm.
PARAMETERS test(1) type c.
SELECTION-SCREEN end of line.
INITIALIZATION.
comm = 'test'.

How to add profit center in fbl5n selection screen

how to add profit center in fbl5n selection screen
and
it is save to copy ddf from sap to cus
wll it affect anything else

When you are on selection screen of FBL5N, press (Shift + F4) DYNAMIC SELECTIONS, there you will see a Dynamic selection screen along with your normal FBL5N selection screen, you will find Profit Centre ther, if you don't find Profit Centre in Dynamic Selection Screen you can add the same from the list on the left, search for profit centre, place your cursor on Profit centre and press the Arrow Button(Copy Selected) on top of the list. Now you will find Prfit Centre in Dynamic selection screen, fill the field with values and press save, that's it.....
Reward points if useful, get back in case of query...
Cheers!!!

How to disable a pushbutton created in selection screen.

How to disable a pushbutton created in selection screen.

you can make it invisible during runtime.
At the event, AT SELECTION-SCREEN OUTPUT. you can turn attributes on and off for screen elements. In this case, invisible = 1, makes the element invisible, 0 makes is visible.
here is a short sample.
report zrich_0001.
parameters: p_check type c.
selection-screen pushbutton 40(20) gocfg
                     user-command gocfg.
at selection-screen output.
loop at screen.
    if screen-name = 'GOCFG'.
      screen-invisible = '1'.
      modify screen.
    endif.
endloop.
Regards,
Rich Heilman

How to get ME23 screen using selection-screen

Hi,
I am trying to get the ME23 screen using selection-screen with following code.
select-options: purordno for ekko-ebeln NO intervals.
SUBMIT SAPMM06E VIA SELECTION-SCREEN .
But at the time of execution i got this error "INCORRECT PROGRAM TYPE WITH SUBMIT".
Can any one please provide me some sample code how to get the ME23 screen
using Abap program.
Regards,
krishna/rajesh.

Hi Rajesh,
You can't submit a pool modul ( SAPMM06E ).
Only executable prog can be submit .
What you can try is use "CALL TRANSACTION" statement.
Hope this helps,
Erwan

How to create Option Boxes IN A SELECTION SCREEN

How to create Option Boxes IN A SELECTION SCREEN.
Thanks!

Hi Rajesh,
The following explanation gives clear picture of what is mean of check box and radio button with coding.....................
CHECK BOX :
AS CHECKBOX [USER-COMMAND fcode]
Effect:
This addition specifies that the input field in the first position of the selection screen is displayed as a checkbox, with the corresponding description next to it on the right. The checkbox is selected if the value of para is "X" or r "x". Otherwise, it is not selected.
The parameter must be created with the type c and length 1. An explicit length len is not permitted. If the addition TYPE is used, this can only be followed by the generic type c or a non-generic data type of type c and length 1.
The addition USER-COMMAND can be used to assign a function code fcode to the parameter. The function code fcode must be directly specified and may have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects the checkbox on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Notes
If the TYPE addition is used to make a reference to a data type in the ABAP Dictionary of type CHAR and length 1, and for which t the valid values in the domain are defined as "X" and " ", the parameter is automatically displayed as a checkbox on the selection screen.
If the addition USER-COMMAND is specified without the addition AS CHECKBOX, and the parameter is of type c with length 1, it is also displayed as a checkbox.
The addition USER-COMMAND can, for example, be used for screen modifications with the addition MODIF ID (see example).
Coding :
PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
 p2(10) TYPE c,
 p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p4(10) TYPE c MODIF ID bl2,
 p5(10) TYPE c MODIF ID bl2,
 p6(10) TYPE c MODIF ID bl2.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF show_all <> 'X' AND
 screen-group1 = 'BL2'.
 screen-active = '0'.
 ENDIF.
 MODIFY SCREEN.
ENDLOOP.
RADIO BUTTON COMMAND :
RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type c and length 1.
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
CODING :
tables : mkpf,mseg,ekko.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1,
 c as checkbox.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X' USER-COMMAND UC1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
write :/ p_werks,
 / s_ebeln.
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN .
IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Let me knwo if any doubts.
Reward with points if it helpful
Regards,
Vijay

How can we use list box on selection screen

hi, howe can we use list box on selection screen and how can we populate the dat ainto the list box and how can we retrive data based on list box from ther database.
thanks in advance
raju

Use the VRM_SET_VALUES function module.
DATA: list TYPE vrm_values,
 value LIKE LINE OF list.
 AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
name = 'P_OBJECT'.
CLEAR list.
REFRESH list.
CLEAR value.
value-key = '1'.
value-text = 'Development Class'.
APPEND value TO list.
CLEAR value.
value-key = '2'.
value-text = 'Program'.
APPEND value TO list.
CLEAR value.
value-key = '3'.
value-text = 'Function Module'.
APPEND value TO list.
CLEAR value.
value-key = '4'.
value-text = 'Database Table'.
APPEND value TO list.
CLEAR value.
value-key = '5'.
value-text = 'Structure'.
APPEND value TO list.
CLEAR value.
value-key = '6'.
value-text = 'View'.
APPEND value TO list.
CLEAR value.
value-key = '7'.
value-text = 'Data Element'.
APPEND value TO list.
CLEAR value.
value-key = '8'.
value-text = 'Table Type'.
APPEND value TO list.
CLEAR value.
value-key = '9'.
value-text = 'Class / Interface'.
APPEND value TO list.
CLEAR value.
value-key = '10'.
value-text = 'Type Group'.
APPEND value TO list.
CLEAR value.
value-key = '11'.
value-text = 'Domain'.
APPEND value TO list.
CLEAR value.
value-key = '12'.
value-text = 'Search Help'.
APPEND value TO list.
CLEAR value.
value-key = '13'.
value-text = 'Lock Object'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
 EXPORTING
 id = name
 values = list
 EXCEPTIONS
 id_illegal_name = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

How to hide some fields in default selection screen in hr abap

Hi experts,
I have created default selection screen,in that in the Period option I wants display only 'Today'.
And in the selection criteria i wants to display personnel number,companycode,personnelsubarea,employee status and instead of payroll area i wants to display 'Org unit'.please tell me step by step procedure,that could be greate helpfull.
Thanks in advance,
mohan

use this logic to display only today in the period option
**Local constants
   CONSTANTS:
          c_0                   VALUE '0' ,
          c_089     TYPE char3 VALUE '089',
          c_091     TYPE char3 VALUE '091',
          c_095     TYPE char3 VALUE '095',
          c_097     TYPE char3 VALUE '097'.
                 At Selection Screen
at selection-screen output.
LOOP AT screen.
      IF
           screen-group4 = c_089 OR
           screen-group4 = c_091 OR
           screen-group4 = c_095 OR
           screen-group4 = c_097 .
      screen-active = c_0.
      MODIFY SCREEN.
     ENDIF.
ENDLOOP.

How to set a field inactive at selection screen?

Hello, here is the definition of my selection screen.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_typcmd FOR EKKO-BSART DEFAULT text-003, "Type de commande
s_grpe FOR EKPO-MATKL ,
 s_ebeln FOR EKPO-EBELN. "Numéro de commande
SELECTION-SCREEN END OF BLOCK b1.
I want to set s_grpe to inactive.thx

Static
Add the NO-DISPLAY option.
PARAMETERS: pxxxx TYPE xxxx NO-DISPLAY.
The parameter will only be reachable by SUBMIT WITH.
Dynamically
assign a MODIF ID xxx to the parameter, and in PBO (AT SELECTION-SCREEN OUTPUT) do a
PARAMETER param TYPE xxxx MODIF ID XXX.
AT SELECTION-SCREEN OUTPUT.
 LOOP AT SCREEN.
 CASE screen-group1.
 WHEN 'XXX'..
 IF <test>.
 screen-active = '0'.
 ELSE.
 screen-active = '1'.
 ENDIF.
So you can choice when to display or not the parameter.
Regards

Supressing Tab selection screen on selection screen ....

Hello Gurus,
I have following program. I want to make the Tab screen on selection screen inivisible when ceratin condition is set in configuration table. I know that I have to do it in AT SELECTION-SCREEN OUTPUT using loop - endloop. But how can I do it , lets say when variable v_block = 'X'.
REPORT ZTOPTEST .
data: v_block type char1.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
parameters:
        max_res(8) default '20'.
SELECTION-SCREEN END OF SCREEN 100.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK tab_block FOR 5 LINES,
TAB (20) tab1 USER-COMMAND tabpush1
DEFAULT SCREEN 100,
END OF BLOCK tab_block.
AT SELECTION-SCREN OUTPUT.
LOOP AT SCREEN.
MODIFY SCREEN.
ENDLOOP.

Hi, Jainam
Use the following Sample Code hope will solve out your problem,
AT SELECTION-SCREEN OUTPUT.
IF v_block = 'X'.
    LOOP AT SCREEN.
      IF screen-name = 'MAX_RES' or screen-name = '%_MAX_RES_%_APP_%-TEXT'.
*        screen-active = 0. " Active this and Hide the Bellow if Compliantly Hide Fields and Lable
        screen-input = 0.   " You can see the Fields but not able to Input
        MODIFY SCREEN.
      ENDIF.
ENDLOOP.
ENDIF.
Best Regards,
Faisal

How to generage pop up screen on selection screen of report program?

Similar Messages

Maybe you are looking for