How to generate a number from two dates

I am 'new' at this of using Numbers for anything. What I want to do AND I can't seem to figure it out, is to generate a 'days total' from two dates. I get paid S.S. on the 2nd Wednesday of each month. I have X number of dollars to spend. In order to view each day how much money I have for the rest of the month, I need to be able to obtain how many days are left in the period. I know what the fixed day is for the end and could key that in. I want it to be able to take the current day for the calculation without my having to key IT IN each day. Then I could use that returned number for other functions. I did look into "Functions" screen on the right hand side, read them several times, tried some but have not succeeded. Can someone here help this 68 year young man to figure this out? Thanks

you can use the function TODAY() to get the date.
then you can compute a duration (the difference between two dates). Data/time is a single type of variable in Numbers. Meaning that a complete date/time value includes both a date and a time. When you enter one without the other Numbers assumes the other portion.
you can subtract any two dates to get the duration.
The format for a date is:
1/2/2015 12:09A
2 Jan 2015 12:09A
a duration would look like:
3w 4d 6h 15m 45s 76ms
Three weeks, four days, six hours, fifteen minutes, forty five seconds, seventy six milliseconds
you can use any combinations of these parts for a duration
A1
=TODAY()
B1
=EOMONTH(TODAY(),0)
C1
=B1−A1

Similar Messages

How to calculate week number from system date

Hi experts,
how to calculate week number from system date ?
thanks.
SK

hi,
The above FM can be used for BADI or customer exit, if it is design level then you can use formula as well, under formula date functions you can use DATE_TO_WEEK.
regards,
Arvind.

How do I calculate days from two different dates?

Hi all,
How do I calculate days from two different dates?
my requirement is to pass the number of days to target field from two dates.
Current date : 14/04/2010
Standard date: 01/01/1957 is the standard = day 0
Is it possible in graphical mapping with out udf?
Plz help me on this I have donu2019t have much knowledge on JAVA.
Thanks

Hi Yadav,
Probably this is not the correct forum for XI / PI .
You can post the same to...
Process Integration (PI) & SOA Middleware
Hope this helps.
Regards
Raj

How do I calculate days from two different dates in XI/PI?

Hi all,
How do I calculate days from two different dates in XI/PI?
my requirement is to pass the number of days to target field from two dates.
Current date : 14/04/2010
Standard date: 01/01/1957 is the standard = day 0
Is it possible in graphical mapping with out udf?
Plz help me on this I have donu2019t have much knowledge on JAVA.
Thanks

Hi Yadav,
Probably this is not the correct forum for XI / PI .
You can post the same to...
Process Integration (PI) & SOA Middleware
Hope this helps.
Regards
Raj

How to generate BP number for the employee (ECC to CRM) ...

Hi all,
can any one give solution for ,how to generate BP number for the employee from ECC to CRM other than active status,as i downloaded employee data from ECC to CRM through ALE/IDOC,as only active employment status employees are got BP number generated,remaining also transfered to CRM but BP number is not generated for those employees,these employee records i can able to see in the HRP5580- HRP5587 tables.
thanks in advance.
vamshi.
Message was edited by:
vamshidher rao

Hi,
Or are you looking for this:
SELECT serial_number, paaf.assignment_number
FROM pay_assignment_actions paa, per_all_assignments_f paaf
WHERE action_status = 'C'
AND paaf.assignment_id = paa.assignment_id
AND serial_number IS NOT NULL
AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date;
- Viky
Edited by: Viky on Dec 17, 2010 11:42 AM

How to get the difference of two dates in years,months and days

Hi friends,
how to get the difference of two dates in years,months and days
for ex 2 years 3 months 13 days
select (sysdate-date_Start) from per_periods_of_service
thanks

Something like this...
SQL> ed
Wrote file afiedt.buf
1 with t as (select to_date('17-nov-2006','dd-mon-yyyy') as c_start_date, to_date('21-jan-2008','dd-mon-yyyy') as c_end_date from dual union all
2             select to_date('21-nov-2006','dd-mon-yyyy'), to_date('17-feb-2008','dd-mon-yyyy') from dual union all
3             select to_date('21-jun-2006','dd-mon-yyyy'), to_date('17-jul-2008','dd-mon-yyyy') from dual
4             )
5 -- end of test data
6 select c_start_date, c_end_date
7        ,trunc(months_between(c_end_date, c_start_date) / 12) as yrs
8        ,trunc(mod(months_between(c_end_date, c_start_date), 12)) as mnths
9        ,trunc(c_end_date - add_months(c_start_date, trunc(months_between(c_end_date, c_start_date)))) as dys
10* from t
SQL> /
C_START_D C_END_DAT        YRS      MNTHS        DYS
17-NOV-06 21-JAN-08          1          2          4
21-NOV-06 17-FEB-08          1          2         27
21-JUN-06 17-JUL-08          2          0         26
SQL>But, don't forget that different months have different numbers of days, and leap years can effect it too.

Urgent Q-adding elements from two data sets

How to add two fields from two data sets. in RTF template
the fields have same names too.

BIPuser wrote:
If you are grouping within one data set, then the current-group will only work for an element within that group. For the second one, try to use the absolute path or use as many of '../' to get up as many levels from where you are.
Thanks!I have defined two different groups.
I need to add the elements from those two diffrent groups.

Combining Data into one Cube from two Data-sources..

Dear Experts,
I am pulling data from two data sources and trying to combine in one Info-Cube. The data are like
Data-Source 01
1. GUID --Common
2.Document No ( User Entry)
3.Dist. Channel
4.Transaction Type
5.Date and Quantity
Data-Source 02
1.GUID -- Common
2.Billing Document ( If User drill down according to Document No , Billing Document should come in the report )
3.Billing date
4.Net Value
Out of the datas , The GUID is common between the 2 data-sources. I was thinking that, tha data will take according to its place and If i select the Document No in Report, it will atomatically fetch all the data like Tran type, dist ch, Billing Document No , Billing date.. .
The problem is , in the report Tha data is not coming as I was thinking.
And Another problem is , In future I need to create a Multiprovider between the above mentioned Info-cube and One ODS. And DOCUMENT NO is common in Cube and ODS.
Please Suggest,
How can I proceed for the following requirement.
Thanks,
Sanjana

Hi Sanjana,
In your case cube will create a problem because it will have multiple records . For example :
Data-Source 01 :
1. GUID -- 101
2.Document No - 999
3.Dist. Channel - DL
4.Transaction Type - GPRO
5.Date and Quantity - 20.02.2011 & 20
Data-Source 02
1.GUID -- 101
2.Billing Document - 6000
3.Billing date - 03.03.2011
4.Net Value - 500
Your cube will have 2 records . And your requirement is to show above two records in 1 record in the report .
Why dont you make an ODS in between , where you can put GUID as the Key field and rest all the fields as data fields. Create 2 transformations to this DSO from the 2 datasources . And let it get updated one by one . Your DSO will have 1 record only . Now either you do reporting on this DSO or take the data to the cube .
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on May 19, 2011 1:34 PM

How to generate load commands from cap (ijc)

I don't understand how to generate load command from cap (in my case ijc)-file.
This is the example from GPShell, first command of three:
Command --> 1. 80E80000EFC48203DE01001ADECAFFED01020400011048656C6C6F576F726C64303030305F5002001F001A001F00140031006E00180147004E0036000000F1000A0005003503010004003103000107A0000000620101060210A0000000090003FFFFFFFF8910710002000110A0000000090005FFFFFFFF8913000000030014011048656C6C6F576F726C64303030305F410031060018438003020001070200000041004480020081010108810000070147000A40188C0002188D00058700181100FFAD007B0003037B00039210210303038B0004538901AD00058B0006188B00077A05308F0008181D1E1100FF538C00097A0020
questions:
1. Why the length of each command is equal to EF (239 bytes)? Maybe 239 bytes + Mac len + cla, ins, p1,p2, cmdLen. I mean, will the length always be EF?
2. C48203DE - what is it. In the GP221 i found:
'C4' 1-n Load File Data Block Mandatory. So if it is right, is the 8203DE - Load File Data Block? Because real data from my ijc-file starts after DE - 01001...
3. Is all data from the file used for load? (i notised that the last command does'nt used all the rest bytes)

So, I will help myself
CAP is zip, but with other filename extension. Inside there are following files:
Applet.cap
Class.cap
ConstantPool.cap
Debug.cap
Descriptor.cap
Directory.cap
Header.cap
Import.cap
Method.cap
RefLocation.cap
StaticField.cap
Order of reading these files for loading by commands 80E8 the following:
loading Header.cap (51 byte)
loading Directory.cap (36 byte)
loading Import.cap (55 byte)
loading Applet.cap (19 byte)
loading Class.cap (19 byte)
loading Method.cap (6779 byte)
loading StaticField.cap (13 byte)
loading ConstantPool.cap (397 byte)
loading RefLocation.cap (663 byte)
loading Descriptor.cap (1005 byte)
loading Debug.cap (12115 byte)
But ijc the file is not cap (zip) and while I didn't understand how to load ijc

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How can I transfer songs from two different itunes?

I want to transfer songs from my brother's itunes library to my shuffle, but when I plug it in his computer, a message saying that his library is not linked to my library (or something to that extent) and whether I would like to replace the songs. If I click yes, all my existing songs are replaced with HIS songs. If I click on NO, the Shuffle icon does not appear at all and I cannot transfer any of his songs to my shuffle. How can I transfer songs from two different computers into my shuffle without replacing any of my existing music?
Shuffle Windows XP
Windows XP

You'll have to setup your iPod to manual instead of automatic update (I'm not sure, though, if it works with the Shuffle as well).
Alexander.

HT4061 How do I consolidate purchases from two different ids that are on the same bank account, and eliminate the extra id without losing any purchases?

How do I consolidate purchases from two different ids that are on the same bank account, and eliminate the extra id without losing any purchases? I want my music to match on both ipad and computer.

Purchases are forever tied to the AppleID they were bought with. There is currently no way to consolidate AppleIDs. Sorry.

How to get internal table from SAP Data Provider C#

Hello.
ABAP:
   DATA: lt_t001 TYPE TABLE OF t001.
   DATA: url(1000) TYPE c.
SELECT * INTO TABLE lt_t001 FROM t001.
CALL FUNCTION 'DP_CREATE_URL'
    EXPORTING
      type                 = 'APPLICATION'
      subtype           = 'X-R3TABLE'
    TABLES
      data                 = lt_t001
    CHANGING
      url                    = url
    EXCEPTIONS
      OTHERS           = 4.
C#:
using SAPDataProvider;
using SAPTableFactoryCtrl;
public void SetDataFromUrl(string url)
            SAPDataProviderClass p = new SAPDataProviderClass();
            p.SetDataFromURL("APPLICATION", "X-R3TABLE", url);
            ISapDPR3Table tbl = p.GetDataAsR3Table("APPLICATION", "X-R3TABLE");
            SAPTableFactoryClass tf = new SAPTableFactoryClass();
            Table tb = (Table)tf.NewTable();
            tb.ISAPrfcITab = tbl.DataTable; // Exception !!!!!!
How to get internal table from SAP Data Provider ?

Hi Sergey,
I'm trying to do the same, have you found a solution to solved it?
thanks for your help.
Regards.
Jonathan

How to output serial number from production order in GLM ?

how to pull serial number from production order in wwi template for GLM ?

Hi,
Please have a look to this thread:
BAPI/RFC to get serial numbers for a production order
Hope it helps,
Kr,
m.

How can I take minutes from mysql date format

how can I take minutes from mysql date format??
example 10:30:00 is stored in my sql and I want to create 3 variables which will store hours, minutes and seconds..
Cheers..

"use application date format" is the choice you want.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to generate a number from two dates

Similar Messages

Maybe you are looking for