How to Generate Audit table entries for user navigation in ADF application?

Hi all,
I have a requirement that I need to have audit table entries for each user action in my application. Along with entries for user actions like insertion,deletion and updation I also need to have entries in the audit log even when a user simply navigates to or views any page.
Although I was successful in creating the entries for user actions like insertion,deletion and updation I failed to do so for simple user navigation through the pages.
Can anyone please help me out?
Thanks in advance,
Arijit

Hi,
Thanks for the quick reply. I am using JSF for my ADF application.Could u please elaborate how to use the PhaseListener for Auditing user navigation?
Arijit

Similar Messages

How to generate dynamic table in JSPX page?(Use ADF to realize OAF)

Dear all,
My requirment is to realized the a EBS standard OAF page(PDH module) function by ADF technique. The key point is to realize Dynamic Search Layout and Dynamic Result Table Layout by ADF.
If anyone who is skill at OAF and ADF, proficient in PDH module is prefered, your question will be highly appreciated.
Because it is hard to paste image into this thread, so I will appreciate it very much if you can refer the attachment ifile of SR 3-1397372841 for detail information. Sorry for the trouble, I really thanks for your help.
Edited by: user12264776 on 2010/02/22 17:32

Hi,
Thanks for the quick reply. I am using JSF for my ADF application.Could u please elaborate how to use the PhaseListener for Auditing user navigation?
Arijit

How to kill the session after the user exit the ADF application

Dear all
I have a problem
The problem is the session still exist after the user close the application and the browser. I want to kill all sessions that is not active.
This is my test scenario:
1- I open IE and run my ADF application that is deployed on weblogic. http://192.168.100.17:7001/myapp/faces/login
2- At the same time I issue this SQL command to view the sessions for user 'ADFUSER' - the "ADFUSER" is the schema user.
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER';QUERY RESULT IS
USERNAME                       MODULE                                           STATUS
ADFUSER                         JDBC Thin Client                                 INACTIVE3- Now the user close the browser
4- Run the SQL again and I notice that the session still exist
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER'RESULT:
USERNAME                       MODULE                                           STATUS
ADFUSER                        JDBC Thin Client                                 INACTIVE5- now the user open the URL again http://192.168.100.17:7001/myapp/faces/login
6-Run the SQL again , and I notice that the old session still exists and a new session created too.
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER'RESULT:
USERNAME                       MODULE                                           STATUS
ADFUSER                        JDBC Thin Client                                 INACTIVE
ADFUSER                        JDBC Thin Client                                 INACTIVE
2 rows selected.and every time I login to the application , a new session is open and the old session still exist
I do not know why this happens
I want to kill old session when the user close the application.
These sessions are cleared only when i restart the weblogic domain.
here is some information about my development environment:
Jdeveloper 11.1.2.3
WebLogic Server Version: 10.3.5.0
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
thanks in advance

Hi,
for performance reasons you should not use dedicated user connections to the database. Instead you use JDBC data sources (default in JDeveloper for ADF BC) that you can configure the database connection pooling for. This means that your v$session will always show a set of active session, which however are shared among users. Assuming you use ADF BC, this is what happens
- A user requests a data bound page
- The ADF BC checks out an AM and connects to the database using one of the database connections in the pool
... user work here ...
- user exits application
- ADF BC returns AM to pool and passivates pending user state (if application is left with dirty transaction)
- Database connection is available in pool as soon as AM released
This also happens between requests. Long story cut short: v$session doesn't give you a true picture
Frank

How to create PMCO table entries for few PM Order

Hi Experts
By a lack of Customizing we have used for few day a PM order type without the flelds AFKO-KLVARP and AFKO-KLVARI set.
For this missing setting no entris had been created during Creation and Confirmation in PMCO and PMCOQT tables.
Now I've filled teh fields with a Zreport on AFKO table, but now I need to create the PMCO* data using RIPMCO00 report.
Unfortunately it doesn't work. Is there a way to re-build this missing datas ???
Thanks for your help.
Claudio
Edited by: Claudio Carrara on Feb 15, 2012 3:48 PM

Run the program RIPMCO00, has no effect because tables PMCO and PMCOQT are empty for these order.
This hapepns becuase when the Order was confirmed, teh fields AFKO-KLVARP and AFKO-KLVARI was null.
Now I've fixed these fiels, and I need to rebuild PMCO datas, burt report doesn't work because PMCO and PMCOQT tables are empty.
I need to create PMCO and PMCOQT entries in advance.
How I can proceed ???
Thanks
Claudio

How to insert date column entry for new row from adf bc tester

Hi,
JDeveloper version 11.1.1.5.0
I have a table with a DATE column. I am trying to insert a new row into the table from the ADF BC Tester. While providing value to the DATE column I am hitting the below error:
(oracle.jbo.domain.DataCreationException) JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date from type:java.lang.String with value:2011/12/06
Please let me know what should be the format to specify date value while inserting entry using BC Tester.
Thanks
Rathnam

Hi,
Check
operation not allowed on java.lang.object

How to validate table entries for that table

i hav created one ztable se11.how to validate table entries for that table

hi,
create foreign key relation ships
do the following way
create a check table with key fields the fields which you want to check
create a foreign key relations with that table
the procedure is as follows
To create your check table:
Begin at the Dictionary: Initial Screen.
Type the table name in the Object Name field.
Choose the Tables radio button.
Press the Create button. The Dictionary: Table/Structure: Change Fields screen is displayed.
Type a short text, choose delivery class A, and tickmark Tab. Maint. Allowed.
Type the field and data element names at the bottom of the screen.
Tickmark both fields to indicate that they both form the primary key
Press the Save button on the Standard toolbar. The Create Object Catalog Entry screen appears.
Press the Local Object button. You are returned to the Dictionary: Table/Structure: Change Fields screen
Press the Technical Settings button on the Application toolbar. The ABAP/4 Dictionary: Maintain Technical Settings screen is displayed.
In the Data Class field, enter APPL0 (APPL0 with a zero, not APPLO with an alphabetic O).
Enter 0 (zero) in the Size Category field.
Press the Save button.
Press the Back button. You are returned to the Dictionary: Table/Structure: Change Fields screen.
Press the Activate button on the Application toolbar. The message "was activated" appears in the status
bar and the Status field contains the value Act..
Choose the menu path Utilities->Create Entries to enter data into your newly created check table. Enter six rows with land1 values of US, CA, DE, IT, JP, and AU.
Foreign Key Creation Procedure
To create a foreign key:
Begin at the Dictionary: Initial Screen.
In the Object Name field, type the name of the table that is to contain the foreign key .
Choose the Tables radio button.
Press the Change button. The Dictionary: Table/Structure: Change Fields screen is displayed.
Position your cursor on the field that is to become the foreign key
Press the Foreign Keys button on the Application toolbar. The Create Foreign Key screen will be displayed
Type a description of the foreign key in the Short Text field, for example, Country Code validation.
Type the name of the check table (-t005) in the Check Table field, or click on the down-arrow and choose it from the list.
The Change Foreign Key pop-up appears. It states Check table name was created or changed. Generate a proposal for field assignment? Press the Yes button.
You are returned to the Create Foreign Key screen. The check table field names and the foreign key field names are displayed. (The check table field names are -t005-mandt and -t005-land1. The foreign key field names are -lfa1-mandt and -lfa1-land1).
Press the Copy button. You are returned to the Dictionary: Table/Structure: Change Fields screen and the message "Foreign key was transferred" appears in the status bar. The Status fields contain the values Revised and Not saved.
Press the Activate button on the Application toolbar. The message "was activated" appears in the status bar. The values in the Status fields are now Act. and Saved.
reward if helpful
prasanth

Error in Source system-No entry for user in table RSADMIN Available

I have a user id with SAP_ALL
But when i try to create source system, i am getting the follwoing message
No entry for <user> in table RSADMIN Available

hi,
use the transaction rscusta
create user and enter the user
BW User ALE ALEREMOTE
or
rsa1 --> setting --> global setting ...
Regards
Ben

How to generate a number sequence for a column of a Z*table?

Hi ,
How to generate a number sequence for a column of a Z*table?
plz guide me.
thanks
Albert

1) Use SNRO for defining a number range.
2) Use FM NUMBER_GET_NEXT for getting the next number with object, sub object etc..
See one example below.
      CALL FUNCTION 'NUMBER_GET_NEXT'
        EXPORTING
          nr_range_nr                   = c_01
          object                        = c_z_prd_code
*           QUANTITY                      = '1'
         subobject                     = p_vkorg
*           TOYEAR                        = '0000'
*           IGNORE_BUFFER                 = ' '
       IMPORTING
         number                        = in_prd_code
*           QUANTITY                      =
*           RETURNCODE                    =
        EXCEPTIONS
              interval_not_found            = 1
              number_range_not_intern       = 2
              object_not_found              = 3
              quantity_is_0                 = 4
              quantity_is_not_1             = 5
              interval_overflow             = 6
              buffer_overflow               = 7
              OTHERS                        = 8
3) You may write these code in main program of the table maintinence
rgds,
TM.

Reports successfully execute but generate a login failed for user 'sa' err

I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005, the following error messages are being generated each time a crystal report is ran:
- Login failed for user 'sa'.
- Error: 18456, Severity: 14, State: 8.
We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?

What happens if you use Profiler when running the report using Crystal Report Designer?
If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
Also, need to know what patch level you are on?
We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
No additional patchs have been applied since Crystal Reports Server was installed.
We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application. The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''.
Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation.

How to enter the table entries?

Hi All,
Can anybody please tell me how to do a table entry. Ex., something we were trying in MRKO transaction. System gave the status as " entry ..... is missing in table T052 ? what I have to do now.
regards
Annu

Hi,
T052 table is for payment terms.
Goto OBB8 t.code, maintain entries there.
I think you have not maintained payment terms in your consignment.
Regards,
Chandra
Edited by: chandra sekhar S on Sep 18, 2008 8:39 AM

Marking Z table entry for Deletion

Hi All,
Based on some condition in my program,
I am entrying one entry in Custom Z table.
Also for some other condition,
I need to mark the Table entry for deletion only, but it should not Delete.
So pls guide me for:
1) How to make Custom table entry as Mark for Deletion?
2) When I put Select Query on table, how can I write that do not Select those
Records which are marked for Deletion ?
Rishi

Hi Rishi,
Create a new field of type 'CDXFELD' (Data Type) in the Custom Z table. Now populate that new field with 'X' if it is marked for deletion. Then you can select all those entries which that field 'CDXFELD' = Space.
i.e., if the field 'CDXFELD' = 'X' then it is marked for deletion else not.
Select *
from Zcustom talbe
in to IT_TAB
where CDXFELD = space.
Hope this will help..
Regards,
Ravi..

How to use different xsl's for user first time logon in OAM

Hi,
We have a requirement to use different stylesheets (xsls) for employees and customers in OAM. How we can configure different XSLs for user first time logon to OAM (i.e for change password and configuring challenge and responses).
Any pointers on this is appreciated.
Thanks in advance..
Srikanth

XSLs displayed are controlled by the StyleCookie. So if you can set the value of this cookie to be different front customers and employees, they will see different styles.
You can do this in various locations -> from the web server, from the url, custom plugins, etc....
-Raj

How can I create a form for users wherein the text field will expand to accommodate additional text?

How can I create a form for users wherein the text field will expand to accommodate additional text?

You need to use LiveCycle (PC Only) to create a dynamic form like that.
The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)

How to generate an XML file for an animation of IK armature

Can someone please tell me how to generate an XML file for an animation of IK armature.
I have a 5 keyframe/16 frame animation of a human character made up of a series of moveiclip symbols that is animated with an IK armature. I need the XML information from the animation.
When I go to Commands > Export Motion XML I get the error message "There is more than one object on frame 1" and then nothing happens.
Thank you,
c

I hope that's not the case. I want to write to adobe about it. I think it's a great feature and it functions really well even though it is not a very developed IK tool. My biggest issue with it is ouput options and integration with motion tweens.
I have seen a lot of examples of animators using it online, just no one talked about output. I just feel it hasn't been developed. It can generate a sprite sheet but only for a single pose frame of the animation, and not all the key frames or pose tweens. I find that functionality quite odd, as if adobe just forgot about IK when added in sprite sheets, etc. and the reason it half works is just an accident.

How To Generate Debug Log Files for ebs jsp?

hi How To Generate Debug Log Files for ebs r12 jsp?
and where i get the log .please help me thanks!

Please check following MOS Document
Oracle Application Server Diagnostic Tools and Log Files in Applications Release 12 (Doc ID 454178.1)

How to Generate Audit table entries for user navigation in ADF application?

Similar Messages

Maybe you are looking for