How to generate quadrature data
I'm using Measurement Studio 2012 Professional and need to generate a sine wave with quadrature output (idealy with a little noise thrown in).
I've examined the SignalGenerator class and cannot find how to have it generate complex data. I understand I can create a complex data type and load the real component but I would prefer real phase and magnitude components.
Can anyone steer me in the right direction please.
Regards
Hey Frank334,
I did some more research into complex data types in Measurement Studio and found the following information, which may be a good place for you to start. There is a ComplexWaveform class available, which supports the ComplexDouble data type. The ComplexDouble Structure should let you define complex data by phase and magnitude.
ComplexWaveform Generic Class: http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/cd111482/
ComplexDouble Structure: http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/b847c3b9/
Myriam D.
Applications Engineer
National Instruments
Similar Messages
-
How to generate XML data from Lotus Notes to migrate to SharePoint by passing XML to SharePoint.?
How to generate XML data from Lotus Notes to migrate to SharePoint by passing XML to SharePoint.?
Ramesh SYou could use XMLQuery to return the data from your tables as XML, that would give you a CLOB.
An example using the SCOTT schema might be like this:
SELECT XMLQuery(
'for $i in ora:view("DEPT")/ROW
return <Department dname="{$i/DNAME}">
<Employee>
{for $j in ora:view("EMP")/ROW
where $j/DEPTNO eq $i/DEPTNO
return ($j/ENAME, $j/JOB, $j/SAL)}
</Employee>
</Department>'
RETURNING CONTENT) FROM DUAL;In the docs you can find more information about its use:
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10492/xdb_xquery.htm -
How to Generate the Dates of Billing Plan Contract
Dear experts,
Need your advice on this.
I have a requirement to create a program to update the Billing Plan of contract. It will run in background and update the end date (billing plan), then generate the dates ( Settlement Date for Deadline, Billing date for billing index and printout, etc ..).
I have managed to change to end date using 'BILLING_SCHEDULE_READ' and 'BILLING_SCHEDULE_SAVE', but I couldn't generate the dates. I've searched sdn and still, no luck. I've tried 'SD_SALES_BILLINGPLAN_CHANGE' with no result. I've also found 'RV_SALES_DOCUMENT_UPDATE', but I dunno how to fill-in all the parameters.
Please help .. I have run out of ideas ...
Thx..
TRIFound the answer .. using BDC :).
Thx for attention ..
TRI.. -
How to generate test data for all the tables in oracle
I am planning to use plsql to generate the test data in all the tables in schema, schema name is given as input parameters, min records in master table, min records in child table. data should be consistent in the columns which are used for constraints i.e. using same column value..
planning to implement something like
execute sp_schema_data_gen (schemaname, minrecinmstrtbl, minrecsforchildtable);
schemaname = owner,
minrecinmstrtbl= minimum records to insert into each parent table,
minrecsforchildtable = minimum records to enter into each child table of a each master table;
all_tables where owner= schemaname;
all_tab_columns and all_constrains - where owner =schemaname;
using dbms_random pkg.
is anyone have better idea to do this.. is this functionality already there in oracle db?Ah, damorgan, data, test data, metadata and table-driven processes. Love the stuff!
There are two approaches you can take with this. I'll mention both and then ask which
one you think you would find most useful for your requirements.
One approach I would call the generic bottom-up approach which is the one I think you
are referring to.
This system is a generic test data generator. It isn't designed to generate data for any
particular existing table or application but is the general case solution.
Building on damorgan's advice define the basic hierarchy: table collection, tables, data; so start at the data level.
1. Identify/document the data types that you need to support. Start small (NUMBER, VARCHAR2, DATE) and add as you go along
2. For each data type identify the functionality and attributes that you need. For instance for VARCHAR2
a. min length - the minimum length to generate
b. max length - the maximum length
c. prefix - a prefix for the generated data; e.g. for an address field you might want a 'add1' prefix
d. suffix - a suffix for the generated data; see prefix
e. whether to generate NULLs
3. For NUMBER you will probably want at least precision and scale but might want minimum and maximum values or even min/max precision,
min/max scale.
4. store the attribute combinations in Oracle tables
5. build functionality for each data type that can create the range and type of data that you need. These functions should take parameters that can be used to control the attributes and the amount of data generated.
6. At the table level you will need business rules that control how the different columns of the table relate to each other. For example, for ADDRESS information your business rule might be that ADDRESS1, CITY, STATE, ZIP are required and ADDRESS2 is optional.
7. Add table-level processes, driven by the saved metadata, that can generate data at the record level by leveraging the data type functionality you have built previously.
8. Then add the metadata, business rules and functionality to control the TABLE-TO-TABLE relationships; that is, the data model. You need the same DETPNO values in the SCOTT.EMP table that exist in the SCOTT.DEPT table.
The second approach I have used more often. I would it call the top-down approach and I use
it when test data is needed for an existing system. The main use case here is to avoid
having to copy production data to QA, TEST or DEV environments.
QA people want to test with data that they are familiar with: names, companies, code values.
I've found they aren't often fond of random character strings for names of things.
The second approach I use for mature systems where there is already plenty of data to choose from.
It involves selecting subsets of data from each of the existing tables and saving that data in a
set of test tables. This data can then be used for regression testing and for automated unit testing of
existing functionality and functionality that is being developed.
QA can use data they are already familiar with and can test the application (GUI?) interface on that
data to see if they get the expected changes.
For each table to be tested (e.g. DEPT) I create two test system tables. A BEFORE table and an EXPECTED table.
1. DEPT_TEST_BEFORE
This table has all EMP table columns and a TEST_CASE column.
It holds EMP-image rows for each test case that show the row as it should look BEFORE the
test for that test case is performed.
CREATE TABLE DEPT_TEST_BEFORE
TESTCASE NUMBER,
DEPTNO NUMBER(2),
DNAME VARCHAR2(14 BYTE),
LOC VARCHAR2(13 BYTE)
2. DEPT_TEST_EXPECTED
This table also has all EMP table columns and a TEST_CASE column.
It holds EMP-image rows for each test case that show the row as it should look AFTER the
test for that test case is performed.
Each of these tables are a mirror image of the actual application table with one new column
added that contains a value representing the TESTCASE_NUMBER.
To create test case #3 identify or create the DEPT records you want to use for test case #3.
Insert these records into DEPT_TEST_BEFORE:
INSERT INTO DEPT_TEST_BEFORE
SELECT 3, D.* FROM DEPT D where DEPNO = 20
Insert records for test case #3 into DEPT_TEST_EXPECTED that show the rows as they should
look after test #3 is run. For example, if test #3 creates one new record add all the
records fro the BEFORE data set and add a new one for the new record.
When you want to run TESTCASE_ONE the process is basically (ignore for this illustration that
there is a foreign key betwee DEPT and EMP):
1. delete the records from SCOTT.DEPT that correspond to test case #3 DEPT records.
DELETE FROM DEPT
WHERE DEPTNO IN (SELECT DEPTNO FROM DEPT_TEST_BEFORE WHERE TESTCASE = 3);
2. insert the test data set records for SCOTT.DEPT for test case #3.
INSERT INTO DEPT
SELECT DEPTNO, DNAME, LOC FROM DEPT_TEST_BEFORE WHERE TESTCASE = 3;
3 perform the test.
4. compare the actual results with the expected results.
This is done by a function that compares the records in DEPT with the records
in DEPT_TEST_EXPECTED for test #3.
I usually store these results in yet another table or just report them out.
5. Report out the differences.
This second approach uses data the users (QA) are already familiar with, is scaleable and
is easy to add new data that meets business requirements.
It is also easy to automatically generate the necessary tables and test setup/breakdown
using a table-driven metadata approach. Adding a new test table is as easy as calling
a stored procedure; the procedure can generate the DDL or create the actual tables needed
for the BEFORE and AFTER snapshots.
The main disadvantage is that existing data will almost never cover the corner cases.
But you can add data for these. By corner cases I mean data that defines the limits
for a data type: a VARCHAR2(30) name field should have at least one test record that
has a name that is 30 characters long.
Which of these approaches makes the most sense for you? -
Hi
I need to generate some test data and would like to know if there are any built functions in SQL Server 2012 that let you do that apart from using loops. In PostgreSQL I use different built in functions to achieve that for example the following statement
creates the test data for me, if any one can show me how I can do that using T-SQL
CREATE TABLE domain AS SELECT generate_series(1,100000) AS domain_id, substr('abcdefghijklmnopqrstuvwxyz',1, (random()*26)::integer) || '.com' AS domain_name;
And also I would like to know how do you get help on syntax in T-SQL, for example in PostgreSQL the following commands show you help etc so are there any similar commands in T-SQL ?
\h ALTER TABLE ( Will show you full syntax for ALTER TABLE )
\dt ( Will detail all the tables in the current Schema )
Thanks a lot
Rgds
TThe two T-SQL suggestions are great and probably the simple answer you're looking for. I wrote a blog article about using the VS data generation feature, as suggested by Chuck, to do some nice stuff here if you want to check that out:
http://blogs.msdn.com/b/samlester/archive/2012/08/04/creating-complex-test-databases-part-2-creating-a-database-with-1-billion-random-rows.aspx
Thanks,
Sam Lester (MSFT)
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
How to generate the date in this format - "24-NOV-2002" ?
i want to pass the date from java into oracle Date format. I have tried to use the SimpleDateFormat class in java. However, I could only get the following formats:
1. "dd-mm-yyyy" --> "24-11-2002"
2. "dd-MM-yyyy" --> "24-11-2002"
3. "dd-MMM-yyyy" --> "24-NOVEMBER-2002"
4. "dd-MMMMM-yyyy" --> "24-NOVEMBER-2002"
How can i get the date format in "24-NOV-2002"?
Thank you very much.3. "dd-MMM-yyyy" --> "24-NOVEMBER-2002"This should have given it to you as 24-Nov-2002 not 24-NOVEMBER-2002.
If your only problem is the case I'd suggest using String.toUpperCase().
E.G.
Date dt = Calendar.getInstance().getTime();
SimpleDateFormat fmt = new SimpleDateFormat("dd-MMM-yyyy");
System.out.println(fmt.format(dt).toUpperCase());If you are trying to format the date for an SQL statement its a lot easier to use a PreparedStatement and setDate(...).
Col -
Been having this problem all day now. i just installed the new version
Can you please send an email to us at [email protected] along with a link to this thread and the .muse file? You can upload it to Adobe Send or Dropbox and include a download link. Thanks!
-
How to generate data source for classification data
Hi all,
I would like to know how to generate a data source for material classification data .
Thanks
OJBhttp://www.mycomputerfiles.com/BW35_SAP/BW_expert_online_docs/Volume_02_2004/Issue_08_September/Understand%20the%20R3%20Classification%20System%20and%20How%20to%20Extract%20.doc
http://affine.co.uk/cms/uploads/How_to_Extract_Classification_Data_into_BW.pdf
hope it helps,
Alex
Edited by: Alex M on Jan 4, 2011 9:28 AM -
Hello xperts,
I'm building a custom demo environment.
I need to have a reasonable amount of transaction data, which I will load from flat files.
Does anybody know how to generate transaction data in a fairly quick way. For example through an Excel macro, Access database, tool, etc.
Any suggestions are highly appreciated!
Thx
JvB
Message was edited by: JvBJvB,
In my last couple of assignments we created test data in DEV/TEST environment & extracted them using standard business content datasource in BW to check the validity of Datasources.
As far as creating it on flat files is concerned its going to be time consuming process, may be using excel might help.
Just save them as CSV files (to load in BW)so that u can use excel which is more convient to use than notepad.
Hope this helps.
Monica -
How can I import data in to the digital word generator in Multisim?
How can I import data in to the digital word generator in Multisim?
I just received this comment from a friend, a RADAR engineer, who has just down loaded Multisim. He has been using HP/Agilent software. He has a work around using a piecewise linear voltage waveform with data imported from Excel but this is not really a good solution. It would also be helpful to import data from Mathcad or equivalent.
"I thought I was about to be impressed with MultiSim but it ended only in disappointment. There is a word generator in the simulation instrument panel which can drive the DAC with a waveform and it can have thousands of lines of values. I opened Excel, wrote the formula to generate the time and voltage points for a chirp, converted to DAC values in Hex and then went back to the word generator in MultiSim to load the values only to find that you have to enter each value manually. It doesn’t even allow you to paste in a list of values from a text file. I’m not going to type 5000 values by hand. If you get the chance to give feedback to National Instruments please ask them if the paste option can be added to the word generator. MultiSim is useful in many regards, but in this case, it left me with the impression that it is considerably limited in capability compared to what I’m used to."Hi,
You can load your data automatically in the Multisim word generator. Follow these steps:
- Save your data file (in excel .xslx ir .csv format) on your computer
- Change the extension of the file to ".dp"
- Double-click the word generator in Multisim and click on Set...
- In the Settings dialog box, click on Load and then Accept
- This will prompt you to select the .dp file you have on your computer, select it and you're good to go
However, in Multisim you have the option of creating your own custom simulation analysis and instrument.
I will try creating the instrument and send it back to you but it might take some time.
Multisim and LabVIEW are very powerful in test automation, with the custom instruments you create for Multisim you don't need to export your data file into excel from LabVIEW (or MathCAD or other tools) and then reload it into Multisim. The test procedure is automated instead.
Please check this reference design about automated simulation
http://zone.ni.com/devzone/cda/tut/p/id/7825
Here is how you can create your own custom measurement tool in Multisim and LabVIEW, but as I mentioned, I will create the word generator and come back to you anyways
http://zone.ni.com/devzone/cda/tut/p/id/5635
Let me know if you have any questions.
Mahmoud W
National Instruments -
How to generate 3 payment due dates& 3 posting against single invoice?
Hello Experts,
Kindly provides some inputs on below requirement.
For example :- In the Utility Bill,
Consumption months: June, July, August
Meter Reading taken in August
Billing Months: September, October, November
Bill generated in August
Consumer receives the bill on September month
Payment Due dates: 12 Sep 2009, 12 Oct 2009 and 12 Nov 2009
Issues-:
1.How to generate three posting against single invoice?
2.How to generate three payment due dates for above postings in three consecutive months since payment due date logic is incremental in nature here, e.g.
1st due date = posting date + 15 days
2nd due date = 1st due date + 30 days
3rd due date = 2nd due date + 30 days
Requirement description:-
The utility generates bill quarterly for domestic consumers. For such consumers, the utility takes reading from the consumers premises after end of consumption period (quarterly ) and generates bill on the 1st billing month (here 1st billing month is September).
In the bill the utility divides total consumption into three parts (considering each part for each consumption month) and calculates all charge heads separately on each part. It however, consolidates and generates a single bill having three rows, each row showing charge heads of each consumption month and also net and gross amount to be given for each consumption month.
Moreover, three postings have to be generated in FICA against that single bill. Also, it provides three due dates to the consumer, each date falling in each billing month, to pay the above three net amounts respectively. Dunning and other activities should be triggered if the consumer fails to pay the stipulated amount by corresponding due date.
Looking forward for valuable suggestions
Thanks in advance
Regards,
Vaseem
Moderator note - question reposted - OP notified of violation Issue on quarterly bill
Edited by: William Eastman on Jun 3, 2010 3:25 PM
Edited by: William Eastman on Jun 3, 2010 5:01 PMHello Experts,
Kindly provides some inputs on below requirement.
For example :- In the Utility Bill,
Consumption months: June, July, August
Meter Reading taken in August
Billing Months: September, October, November
Bill generated in August
Consumer receives the bill on September month
Payment Due dates: 12 Sep 2009, 12 Oct 2009 and 12 Nov 2009
Issues-:
1.How to generate three posting against single invoice?
2.How to generate three payment due dates for above postings in three consecutive months since payment due date logic is incremental in nature here, e.g.
1st due date = posting date + 15 days
2nd due date = 1st due date + 30 days
3rd due date = 2nd due date + 30 days
Requirement description:-
The utility generates bill quarterly for domestic consumers. For such consumers, the utility takes reading from the consumers premises after end of consumption period (quarterly ) and generates bill on the 1st billing month (here 1st billing month is September).
In the bill the utility divides total consumption into three parts (considering each part for each consumption month) and calculates all charge heads separately on each part. It however, consolidates and generates a single bill having three rows, each row showing charge heads of each consumption month and also net and gross amount to be given for each consumption month.
Moreover, three postings have to be generated in FICA against that single bill. Also, it provides three due dates to the consumer, each date falling in each billing month, to pay the above three net amounts respectively. Dunning and other activities should be triggered if the consumer fails to pay the stipulated amount by corresponding due date.
Looking forward for valuable suggestions
Thanks in advance
Regards,
Vaseem
Moderator note - question reposted - OP notified of violation Issue on quarterly bill
Edited by: William Eastman on Jun 3, 2010 3:25 PM
Edited by: William Eastman on Jun 3, 2010 5:01 PM -
How to generate Top sales report from SAP data ?
Hello experts,
I am completely a newbie to SAP BO , can any one guide me how to generate TOP sales of the year report from SAP data ?Hi David,
First Let me know the Source & Tools to involve.
Let me go with the generic approach:
If the source is BW, then you can create the logic in query designer designer and then you can incorporate the data into the dashboard or webi or crystal report whatever its.
If the source is sql or anyother DB then it can also be achievable in crystal or webi to write the logic in top 10 values by ranking then you can incorporate the data into the dashboard, but here you can limit the top or bottom values.
Hope this helps, please revert for more clarifications on this.
--SumanT -
How can I generate a data merge that includes a barcode from excel spreadsheet to InDesign?
Can you please advise if the following process is possible within InDesign CS 5.5? (Mac OS 10.8.2).
We need to create a data merge that includes a barcode. The data merge is for several thousand records.
We have a customer-supplied Excel spreadsheet that contains seven fields, one of which is a number that ultimately needs to print as a barcode when we make the data merge in InDesign.
As you would expect, the conventional six fields data merge perfectly - but we can't find a way to make the barcode print correctly within the data merge.
We have investigated several possible solutions without success.
Some solutions suggest a plug-in for Excel to convert the number into a barcode whilst still in the spreadsheet - but this doesn't come across correctly when we import the CSV file into the InDesign data merge.
We have investigated certain third party software applications but none provide the full solution we require. Some, for example, appear to create the barcode within the Excel spreadsheet but don't produce the barcode correctly when we data merge in InDesign; and some will allow us to create a one-off barcode within InDesign but have no automated way of retrieving the thousands of Excel numbers and turning them into barcodes.
We have also come across possible 'font' solutions but have had no success with these either.
For a previous job we needed to produce we outsourced to a specialist mailing company, who assured us they produced the whole job (very quickly) within InDesign. They, understandably, won't tell us how they did it. But, given the speed with which they produced the job for us, we imagine - with the correct software - the whole process is easy to do.
Can you please advise?See second posting atHow do I generate a data merge in InDesign from an excel spreadsheet which includes a barcode
-
How to generate a set of date type records
How to generate a set of date-type records, with a fixed interval, starting from a date like 2008-01-01.
Some thing like this
SQL> select to_char(to_date('2008-01-01','yyyy-mm-dd') + (level - 1),'DD-MON-YYYY') my_date
2 from dual
3 connect by level <= 10
4 /
MY_DATE
01-JAN-2008
02-JAN-2008
03-JAN-2008
04-JAN-2008
05-JAN-2008
06-JAN-2008
07-JAN-2008
08-JAN-2008
09-JAN-2008
10-JAN-2008
10 rows selected. -
How to generate the insert script of the tables data present in an entire
How to generate the insert script of the tables data present in an entire schema in sqlplus environment
with out toad can you please help me please!!!!!!!!!!!!!HI,
First create this function to get insert scripts.
/* Formatted on 2012/01/16 10:41 (Formatter Plus v4.8.8) */
CREATE OR REPLACE FUNCTION extractdata (v_table_name VARCHAR2)
RETURN VARCHAR2
AS
b_found BOOLEAN := FALSE;
v_tempa VARCHAR2 (8000);
v_tempb VARCHAR2 (8000);
v_tempc VARCHAR2 (255);
BEGIN
FOR tab_rec IN (SELECT table_name
FROM user_tables
WHERE table_name = UPPER (v_table_name))
LOOP
b_found := TRUE;
v_tempa := 'select ''insert into ' || tab_rec.table_name || ' (';
FOR col_rec IN (SELECT *
FROM user_tab_columns
WHERE table_name = tab_rec.table_name
ORDER BY column_id)
LOOP
IF col_rec.column_id = 1
THEN
v_tempa := v_tempa || '''||chr(10)||''';
ELSE
v_tempa := v_tempa || ',''||chr(10)||''';
v_tempb := v_tempb || ',''||chr(10)||''';
END IF;
v_tempa := v_tempa || col_rec.column_name;
IF INSTR (col_rec.data_type, 'CHAR') > 0
THEN
v_tempc := '''''''''||' || col_rec.column_name || '||''''''''';
ELSIF INSTR (col_rec.data_type, 'DATE') > 0
THEN
v_tempc :=
'''to_date(''''''||to_char('
|| col_rec.column_name
|| ',''mm/dd/yyyy hh24:mi'')||'''''',''''mm/dd/yyyy hh24:mi'''')''';
ELSE
v_tempc := col_rec.column_name;
END IF;
v_tempb :=
v_tempb
|| '''||decode('
|| col_rec.column_name
|| ',Null,''Null'','
|| v_tempc
|| ')||''';
END LOOP;
v_tempa :=
v_tempa
|| ') values ('
|| v_tempb
|| ');'' from '
|| tab_rec.table_name
|| ';';
END LOOP;
IF NOT b_found
THEN
v_tempa := '-- Table ' || v_table_name || ' not found';
ELSE
v_tempa := v_tempa || CHR (10) || 'select ''-- commit;'' from dual;';
END IF;
RETURN v_tempa;
END;
SET PAUSE OFF
SET LINESIZE 1200
SET PAGESIZE 100
SET TERMOUT OFF
SET HEAD OFF
SET FEED OFF
SET ECHO OFF
SET VERIFY OFF
SPOOL GET_INSERTS.SP REP
SELECT EXTRACTDATA('EMP') FROM DUAL;
SPOOL OFF
SET PAUSE ON
SET LINESIZE 120
SET PAGESIZE 14
SET TERMOUT ON
SET HEAD ON
SET FEED 5
SET ECHO ON
SET VERIFY ON
SELECT 'insert into EMP ('
|| CHR (10)
|| 'EMPNO,'
|| CHR (10)
|| 'ENAME,'
|| CHR (10)
|| 'JOB,'
|| CHR (10)
|| 'MGR,'
|| CHR (10)
|| 'HIREDATE,'
|| CHR (10)
|| 'SAL,'
|| CHR (10)
|| 'COMM,'
|| CHR (10)
|| 'DEPTNO) values ('
|| DECODE (empno, NULL, 'Null', empno)
|| ','
|| CHR (10)
|| ''
|| DECODE (ename, NULL, 'Null', '''' || ename || '''')
|| ','
|| CHR (10)
|| ''
|| DECODE (job, NULL, 'Null', '''' || job || '''')
|| ','
|| CHR (10)
|| ''
|| DECODE (mgr, NULL, 'Null', mgr)
|| ','
|| CHR (10)
|| ''
|| DECODE (hiredate,
NULL, 'Null',
'to_date('''
|| TO_CHAR (hiredate, 'mm/dd/yyyy hh24:mi')
|| ''',''mm/dd/yyyy hh24:mi'')'
|| ','
|| CHR (10)
|| ''
|| DECODE (sal, NULL, 'Null', sal)
|| ','
|| CHR (10)
|| ''
|| DECODE (comm, NULL, 'Null', comm)
|| ','
|| CHR (10)
|| ''
|| DECODE (deptno, NULL, 'Null', deptno)
|| ');'
FROM emp;
SELECT '-- commit;'
FROM DUAL;now run the baove select statement you will get the following insert statements
/* Formatted on 2012/01/16 10:57 (Formatter Plus v4.8.8) */
--'INSERT INTO EMP('||CHR(10)||'EMPNO,'||CHR(10)||'ENAME,'||CHR(10)||'JOB,'||CHR(10)||'MGR,'||CHR(10)||'HIREDATE,'||CHR(10)||'SAL,'||CHR(10)||'COMM,'||CHR(10)||'DEPTNO)VALUES('||DECODE(EMPNO,NULL,'NULL',EMPNO)||','||CHR(10)||''||DECODE(ENAME,NULL,'NULL',''''|
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm, deptno
VALUES (7369, 'SMITH', 'CLERK', 7902,
TO_DATE ('12/17/1980 00:00', 'mm/dd/yyyy hh24:mi'), 800, NULL, 20
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm, deptno
VALUES (7499, 'ALLEN', 'SALESMAN', 7698,
TO_DATE ('02/20/1981 00:00', 'mm/dd/yyyy hh24:mi'), 1600, 300, 30
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm, deptno
VALUES (7521, 'WARD', 'SALESMAN', 7698,
TO_DATE ('02/22/1981 00:00', 'mm/dd/yyyy hh24:mi'), 1250, 500, 30
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm,
deptno
VALUES (7566, 'JONES', 'MANAGER', 7839,
TO_DATE ('04/02/1981 00:00', 'mm/dd/yyyy hh24:mi'), 2975, NULL,
20
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm,
deptno
VALUES (7654, 'MARTIN', 'SALESMAN', 7698,
TO_DATE ('09/28/1981 00:00', 'mm/dd/yyyy hh24:mi'), 1250, 1400,
30
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm,
deptno
VALUES (7698, 'BLAKE', 'MANAGER', 7839,
TO_DATE ('05/01/1981 00:00', 'mm/dd/yyyy hh24:mi'), 2850, NULL,
30
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm,
deptno
VALUES (7782, 'CLARK', 'MANAGER', 7839,
TO_DATE ('06/09/1981 00:00', 'mm/dd/yyyy hh24:mi'), 2450, NULL,
10
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm,
deptno
VALUES (7788, 'SCOTT', 'ANALYST', 7566,
TO_DATE ('04/19/1987 00:00', 'mm/dd/yyyy hh24:mi'), 3000, NULL,
20
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm,
deptno
VALUES (7839, 'KING', 'PRESIDENT', NULL,
TO_DATE ('11/17/1981 00:00', 'mm/dd/yyyy hh24:mi'), 5000, NULL,
10
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm, deptno
VALUES (7844, 'TURNER', 'SALESMAN', 7698,
TO_DATE ('09/08/1981 00:00', 'mm/dd/yyyy hh24:mi'), 1500, 0, 30
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm,
deptno
VALUES (7876, 'ADAMS', 'CLERK', 7788,
TO_DATE ('05/23/1987 00:00', 'mm/dd/yyyy hh24:mi'), 1100, NULL,
20
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm, deptno
VALUES (7900, 'JAMES', 'CLERK', 7698,
TO_DATE ('12/03/1981 00:00', 'mm/dd/yyyy hh24:mi'), 950, NULL, 30
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm,
deptno
VALUES (7902, 'FORD', 'ANALYST', 7566,
TO_DATE ('12/03/1981 00:00', 'mm/dd/yyyy hh24:mi'), 3000, NULL,
20
INSERT INTO emp
(empno, ename, job, mgr,
hiredate, sal, comm,
deptno
VALUES (7934, 'MILLER', 'CLERK', 7782,
TO_DATE ('01/23/1982 00:00', 'mm/dd/yyyy hh24:mi'), 1300, NULL,
10
);i hope this helps .
Thanks,
P Prakash
Edited by: prakash on Jan 15, 2012 9:21 PM
Edited by: prakash on Jan 15, 2012 9:22 PM
Maybe you are looking for
-
How to install and use a plug-in downloaded from the apple site?
how to install and use a plug-in downloaded from the apple site?
-
UWL Mass Approval XML changes or Custom App
Dear Gurus, Please help us in understanding the solution to mass approval issue. Shall we go for XML changes or go for a new custom development in wda/wdj I have tried modifying XML method for leave approval but the issue is : 1. Tasks drop off from
-
Reconstruct / receive problem after a smtp crash / pop receiving problem
Hi, The smtp hooked up yersteday, I deleted the locked files and it could then send emails again... Thanks to Chad for his help. After restarting all the services, it appears that I can receive mails only from my webmail. When I try with Outlook, it
-
What type of cord do I need to hook my ipad up to a stereo?
I am a dance instructor and I am wondering how to hook my ipad up to a stereo to play music
-
Quick question, If I managed to lose my videos from my PC which I use to connect my iPod to though iTunes, is there a tool available online that will enable me to manually extract the videos from the ipod?