How to generate report using toad in oracle 10g

hi ,
i am using oracle 10g with toad editor .if i am execute any table, result it will be 100 rows like, i want to make report each records page wise with header,footer etc..
please help..
thank u..

That is a Toad question isn't it, and Larry still didn't buy Quest, so you are at the wrong address.
Go to http://www.questsoftware.com and find their forums.
Thank you.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

Generating reports using RWServlet.class(Patch-12)

Sir,
We have configured the Apache Tomcat-3.2.2 to be the servlet engine for generating reports using oracle.reports.rwcgi.RWServlet. Earlier we have been using, Patch-2. We have created many keys(cgicmd.dat) for the different reports that are there with the mostly needed report parameters(including PARAMFORM=YES). We call the report in the browser giving the URL "http://<machine_name>/oraclereports/servlet/oracle.reports.rwcgi.RWServlet?<key_name>". Now, the report page that gets generated is the parameter form. In the HTML source of this page, the form-submitting action is pointing correctly to URL "http://<machine_name>/oraclereports/servlet/oracle.reports.rwcgi.RWServlet.....". The parameter values are entered and the form submitted. The generated report is perfect..
Some days before, Patch-10 was installed. The RWServlet.class that comes along with this was copied to the oracle/reports/rwcgi folder in Tomcat. Now, when the same steps(calling report) as done before were done, the report is not getting generated, giving the output for no page found. The HTML source of the parameter form shows the form-submitting-action URL as "http://<machine_name>/servlet/oracle.reports.rwcgi.RWServlet.." omitting the "oraclereports" that was there earlier.
Now, we have installed Patch-12, copied the new RWServlet.class. For this case also, the same problem is now encountered. Now, have we have to do any additional configuration somewhere? The page that is generated, on giving the URL ""http://<machine_name>/oraclereports/servlet/oracle.reports.rwcgi.RWServlet/showenv?server=Rep60_MACHINENAME" is showing the SCRIPT_NAME as "/servlet/oracle.reports.rwcgi.RWServlet". Is it something to do with this? We tried putting SCRIPT_NAME as a user environment variable, and also by giving SET SCRIPT_NAME=/oraclereports. Still, the problem persists. Doesn't the HttpServletRequest class have some method that returns the SCRIPT_NAME, i.e, the path where the execution is being done? How could different versions of the same class oracle.reports.rwcgi.RWServlet deployed with the same settings on the Tomcat servlet engine behave differently? Please help us on how to solve this problem..
Thank you,
Regards..
Ranjith

Hi,
Is there some way, i.e., by doing some Tomcat setting changes, that the RWServlet of Patch-10/12 can be made to work like RWServlet of Patch-2(with normal settings)? Please help..
Thank you,
Regards..
Ranjith

Generate report using Word Report Generation VIs error

When I Generate report using Word Report Generation VIs ,the error is generated.
This is my Vi
can somebody tell the error reason?
The attaché is Vi (one is 2011,other is 8.6)
Attachments:
report-8.6.vi ‏16 KB
report2.vi ‏33 KB
template.doc ‏40 KB

Hi Ben64
Thank you! The problem is solved.
BUT when I use the Word Easy Graph vi ,the result is
I want the Graph (curve),like as:
How Can I do get the picture.
I have other problem. I want to get default name for the new word file.
liang

How to generate report with dynamic variable number of columns?

How to generate report with dynamic variable number of columns?
I need to generate a report with varying column names (state names) as follows:
SELECT AK, AL, AR,... FROM States ;
I get these column names from the result of another query.
In order to clarify my question, Please consider following table:
CREATE TABLE TIME_PERIODS (
PERIOD     VARCHAR2 (50) PRIMARY KEY
CREATE TABLE STATE_INCOME (
     NAME     VARCHAR2 (2),
     PERIOD     VARCHAR2 (50)     REFERENCES TIME_PERIODS (PERIOD) ,
     INCOME     NUMBER (12, 2)
I like to generate a report as follows:
AK CA DE FL ...
PERIOD1 1222.23 2423.20 232.33 345.21
PERIOD2
PERIOD3
Total 433242.23 56744.34 8872.21 2324.23 ...
The TIME_PERIODS.Period and State.Name could change dynamically.
So I can't specify the state name in Select query like
SELECT AK, AL, AR,... FROM
What is the best way to generate this report?

SQL> -- test tables and test data:
SQL> CREATE TABLE states
2    (state VARCHAR2 (2))
3 /
Table created.
SQL> INSERT INTO states
2 VALUES ('AK')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('AL')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('AR')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('CA')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('DE')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('FL')
3 /
1 row created.
SQL> CREATE TABLE TIME_PERIODS
2    (PERIOD VARCHAR2 (50) PRIMARY KEY)
3 /
Table created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD1')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD2')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD3')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD4')
3 /
1 row created.
SQL> CREATE TABLE STATE_INCOME
2    (NAME   VARCHAR2 (2),
3      PERIOD VARCHAR2 (50) REFERENCES TIME_PERIODS (PERIOD),
4      INCOME NUMBER (12, 2))
5 /
Table created.
SQL> INSERT INTO state_income
2 VALUES ('AK', 'PERIOD1', 1222.23)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('CA', 'PERIOD1', 2423.20)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('DE', 'PERIOD1', 232.33)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('FL', 'PERIOD1', 345.21)
3 /
1 row created.
SQL> -- the basic query:
SQL> SELECT   SUBSTR (time_periods.period, 1, 10) period,
2            SUM (DECODE (name, 'AK', income)) "AK",
3            SUM (DECODE (name, 'CA', income)) "CA",
4            SUM (DECODE (name, 'DE', income)) "DE",
5            SUM (DECODE (name, 'FL', income)) "FL"
6 FROM     state_income, time_periods
7 WHERE    time_periods.period = state_income.period (+)
8 AND      time_periods.period IN ('PERIOD1','PERIOD2','PERIOD3')
9 GROUP BY ROLLUP (time_periods.period)
10 /
PERIOD             AK         CA         DE         FL
PERIOD1       1222.23     2423.2     232.33     345.21
PERIOD2
PERIOD3
              1222.23     2423.2     232.33     345.21
SQL> -- package that dynamically executes the query
SQL> -- given variable numbers and values
SQL> -- of states and periods:
SQL> CREATE OR REPLACE PACKAGE package_name
2 AS
3    TYPE cursor_type IS REF CURSOR;
4    PROCEDURE procedure_name
5       (p_periods   IN     VARCHAR2,
6        p_states    IN     VARCHAR2,
7        cursor_name IN OUT cursor_type);
8 END package_name;
9 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY package_name
2 AS
3    PROCEDURE procedure_name
4       (p_periods   IN     VARCHAR2,
5        p_states    IN     VARCHAR2,
6        cursor_name IN OUT cursor_type)
7    IS
8       v_periods          VARCHAR2 (1000);
9       v_sql               VARCHAR2 (4000);
10       v_states          VARCHAR2 (1000) := p_states;
11    BEGIN
12       v_periods := REPLACE (p_periods, ',', ''',''');
13       v_sql := 'SELECT SUBSTR(time_periods.period,1,10) period';
14       WHILE LENGTH (v_states) > 1
15       LOOP
16         v_sql := v_sql
17         || ',SUM(DECODE(name,'''
18         || SUBSTR (v_states,1,2) || ''',income)) "' || SUBSTR (v_states,1,2)
19         || '"';
20         v_states := LTRIM (SUBSTR (v_states, 3), ',');
21       END LOOP;
22       v_sql := v_sql
23       || 'FROM     state_income, time_periods
24           WHERE    time_periods.period = state_income.period (+)
25           AND      time_periods.period IN (''' || v_periods || ''')
26           GROUP BY ROLLUP (time_periods.period)';
27       OPEN cursor_name FOR v_sql;
28    END procedure_name;
29 END package_name;
30 /
Package body created.
SQL> -- sample executions from SQL:
SQL> VARIABLE g_ref REFCURSOR
SQL> EXEC package_name.procedure_name ('PERIOD1,PERIOD2,PERIOD3','AK,CA,DE,FL', :g_ref)
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD             AK         CA         DE         FL
PERIOD1       1222.23     2423.2     232.33     345.21
PERIOD2
PERIOD3
              1222.23     2423.2     232.33     345.21
SQL> EXEC package_name.procedure_name ('PERIOD1,PERIOD2','AK,AL,AR', :g_ref)
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD             AK         AL         AR
PERIOD1       1222.23
PERIOD2
              1222.23
SQL> -- sample execution from PL/SQL block
SQL> -- using parameters derived from processing
SQL> -- cursors containing results of other queries:
SQL> DECLARE
2    CURSOR c_period
3    IS
4    SELECT period
5    FROM   time_periods;
6    v_periods   VARCHAR2 (1000);
7    v_delimiter VARCHAR2 (1) := NULL;
8    CURSOR c_states
9    IS
10    SELECT state
11    FROM   states;
12    v_states    VARCHAR2 (1000);
13 BEGIN
14    FOR r_period IN c_period
15    LOOP
16       v_periods := v_periods || v_delimiter || r_period.period;
17       v_delimiter := ',';
18    END LOOP;
19    v_delimiter := NULL;
20    FOR r_states IN c_states
21    LOOP
22       v_states := v_states || v_delimiter || r_states.state;
23       v_delimiter := ',';
24    END LOOP;
25    package_name.procedure_name (v_periods, v_states, :g_ref);
26 END;
27 /
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD             AK         AL         AR         CA         DE         FL
PERIOD1       1222.23                           2423.2     232.33     345.21
PERIOD2
PERIOD3
PERIOD4
              1222.23                           2423.2     232.33     345.21

How to use iframes in oracle 10g

I have to load two jsp pages in a single html . I have done that thru iframes. But i have to dynamically load the second jsp page in the frame 2 , when the user clicks upon certain details in the frame 1 jsp page. I have wriiten the code of document.iframe in format trigger attribute. It doesn't work. Is there any other way to achieve this. I want to load the frame 2 jsp page dynamically , according to the input i get from frame 1 jsp page.

Hi,
>>Anybody know how to use profiler in oracle 10g
What do you mean "profiler". About Resource Limits/Create Profiles ?
>>i couldn't able to install the enterprise manager console.
What OS ?
>>because i need to trace the execution of a stored procedure.waiting the reply.
Debug ? You can use SQL Developer, TOAD, PLSQL Developer for this purpose.
Cheers

How to Use Profiler in ORACLE 10g

Hi all,
Anybody know how to use profiler in oracle 10g and also i couldn't able to install the enterprise manager console.is there any tools available for that.because i need to trace the execution of a stored procedure.waiting the reply.
Sathish

Hi,
>>Anybody know how to use profiler in oracle 10g
What do you mean "profiler". About Resource Limits/Create Profiles ?
>>i couldn't able to install the enterprise manager console.
What OS ?
>>because i need to trace the execution of a stored procedure.waiting the reply.
Debug ? You can use SQL Developer, TOAD, PLSQL Developer for this purpose.
Cheers

How to generate reports of registered IP handsets and their corresponding extension on call manager 4.2.3

Hi
how to generate reports of registered IP handsets and their corresponding extension on call manager 4.2.3
I checked the route plan report and the generate report function on the BAT.. however it doesnt has the feature to generate only the registered IP phone with its coresponding extension
Thanks
Kind regards
Rachel

Call manager provides the called party with the extension or directory number of the calling party on a display. You can use the Calling Line ID Presentation field in the Gateway Configuration window to control whether the CLID displays for all outgoing calls on the gateway.Refer URL
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008070e48b.html#wp1051056

Export import - using TOAD FOR ORACLE and ORACLE DATABASE 10G EXPRESS or s

Hi all,
Could you please kindly help me?
I am using TOAD FOR ORACLE to export a table to flat file A. The tool just supports to distinguish fields by "spaces".
And the web page of ORACLE DATABASE 10G EXPRESS to import the data from flat file A to another database. To load data to a table from a text file, the web page bases on "comma" to distinguish fields.
So could you have any suggestion for me? I need to export data via TOAD FOR ORACLE. And then import it to another database by the home page of ORACLE DATABASE 10G EXPRESS or sqlplus.
Thank you so much for your help!

Dont use TOAD for exporting your data. Use PL/SQL. Below is the code given in Asktom.com that does what you want.
create or replace function dump_csv( p_query     in varchar2,
                                      p_separator in varchar2 default ',',
                                      p_dir       in varchar2 ,
                                      p_filename in varchar2 )
return number
is
    l_output        utl_file.file_type;
    l_theCursor     integer default dbms_sql.open_cursor;
    l_columnValue   varchar2(2000);
    l_status        integer;
    l_colCnt        number default 0;
    l_separator     varchar2(10) default '';
    l_cnt           number default 0;
begin
    l_output := utl_file.fopen( p_dir, p_filename, 'w' );
    dbms_sql.parse( l_theCursor, p_query, dbms_sql.native );
    for i in 1 .. 255 loop
        begin
            dbms_sql.define_column( l_theCursor, i, l_columnValue, 2000 );
            l_colCnt := i;
        exception
            when others then
                if ( sqlcode = -1007 ) then exit;
                else
                    raise;
                end if;
        end;
    end loop;
    dbms_sql.define_column( l_theCursor, 1, l_columnValue, 2000 );
    l_status := dbms_sql.execute(l_theCursor);
    loop
        exit when ( dbms_sql.fetch_rows(l_theCursor) <= 0 );
        l_separator := '';
        for i in 1 .. l_colCnt loop
            dbms_sql.column_value( l_theCursor, i, l_columnValue );
            utl_file.put( l_output, l_separator || l_columnValue );
            l_separator := p_separator;
        end loop;
        utl_file.new_line( l_output );
        l_cnt := l_cnt+1;
    end loop;
    dbms_sql.close_cursor(l_theCursor);
    utl_file.fclose( l_output );
    return l_cnt;
end dump_csv;
/Here is the link to this thread in asktom.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:95212348059

How to generate and use Matlab(R2007) .dll's in Labview

Is there a step-by-step example on how to generate and use Matlab(R2007) .dll's in Labview.
Our experimenal hardware is LabView-controlled and we want to pass
images/2d intensity arrays to a more complex matlab program that will
return an array of extracted data which we want to use in LabView again.
Thank you
Carsten

I recommend having a wrapper created around the matlab dll that converts the datatypes for you. There is a lot of fooling around with pointers involved which is very difficult in LabVIEW. btw, this got much more complicated after Matlab 7. Essentially, you need to convert your inputs into mxArrays, and then add those mxArrays to an mxArray list that you pass by pointer into the matlab dll. You also need to create a mxArray list for the outputs from the dll which you will need to extract your data out of before converting it back into a LabVIEW supported datatype. It's a big hassle. We do this pretty often, but we have created a c library that handles all the conversions, so it is feasible for us. Unfortunately, I can't share the library, but hopefully this information will help you get where you want to be.
Like I said, it would be easier if you can just get a c developer to write a wrapper for you to keep it simple in LabVIEW. Alternatively, you might try getting your m-code to work in Mathscript.
Chris

How to generate report for Service sheet - ECC 6.0

Hi
Can anyone let me know regarding how to generate reports for service sheets entered
regards
Sanjay

Hi,
Get Service Entry Sheet with following T.codes:
1.MSRV6
2.ML84
Regards,
Biju K

How to generate .SQL format file from oracle database?

How to generate .SQL format file from oracle database?
I have a database of Oracle 8.1.6,now want to generate script file (including table structure,index,etc.) from it,What should I do?
Thanks.

Your question pertains to the Database Export/Import. This forum exclusively focusses on the export/import utilities that come along with "Oracle Portal" which is a web-based tool. Could you please post your question under the RDBMS export/import or migration forum.

How we create new data base in oracle 10g express edition

hello every body.. i student of B tech n new user of oracle so please help me how we creat new data base in oracle 10g express edition

Hello, Oracle XE can not create more than one instance, the other editions yes, but like other editions XE allows you to create database schemas, schemas logically grouped objects like tables, views, indexes created by a user. By creating an Oracle user is associated with a schema of the same name.
Using SYS or system accounts for creating user accounts.
Syntax to create a user:
create user Your_user
IDENTIFIED BY password
default tablespace users;
grant connect, resources to your_user;
Edited by: rober584812 on Jun 25, 2010 9:03 PM

How to change redo log size in oracle 10g

Hi Experts,
Can anybody confirm how to change redo log size in oracle 10g?
Amit

Dear Amit,
You can enlarge the size of existing Online Redo log files, by adding new groups with different size of files (origlog$/mirrlog$) and then carefully droping the old groups with their associated inactive files.
Please refer SAP Note 309526 - Enlarging redo log files to perform the activity.
Steps to perform:
STEP-1. Analyze the exisiting situation and prepare an action plan.
A. You have to ensure that no more than one log switch per minute occurs during peak times.
It may also be necessary to increase the size of the online redo logs until they are large enough.
Too many log switches lead to too many checkpoints, which in turn lead to a high writing load in the I/O subsystem.
Use ST04 -> Additional Functions --> Display GV$-Views
There you can select
Gv$LOG_HISTORY --->for determing your existing LOG switching frequency.
GV$LOG -
> list the status(INACTIVE/CURRENT/ACTIVE) /size/sequence no. of existing online redolog files
GV$LOGFILE --- > list the information of existing online redolog files with their storage paths
You can document the existing situation of Online Redo Log Fiile management before going to enlarge Redo Log Files.
It will be helpful, if something goes wrong while performing activities.
B. Based on above Situation analysis, Plan your New Redo Log Group and there Members with new optimal size.
e.g.
Group No.         Redo Log File Locations u201C/oracle/<SID>/u201D                  Size
                             /origlogA                  /mirrlogA
15                        log_g15m1.dbf         log_g15m2.dbf               100 MB
17                        log_g17m1.dbf            log_g17m2.dbf               100 MB
                            /origlogB                    /mirrlogB
16                       log_g16m1.dbf          log_g16m2.dbf            100 MB
18                       log_g18m1.dbf            log_g18m2.dbf            100 MB
Continue to next.....

How much concurrent conection is allowed in oracle 10g XE?

How much concurrent conection is allowed in oracle 10g XE?

Hi,
>>How much concurrent conection is allowed in oracle 10g XE? I think that the default value on Oracle XE for the SESSIONS parameter is 40.
Then, if you will need more concurrent sessions accessing the database, you need increase this value using alter system command for this parameter.
Cheers

How do we find instance name in ORACLE 10g

Hi All,
How do we find SID name in Oracle 10g
Thanks in advance
Pandiarajan

Apology accepted.
But yes, of course I was harsh (not at you, actually, but at the plonker who thinks he can tell me that 'echo $something' is "not right").
Do you know how many questions could be answered here if people weren't forever debating perfectly acceptable answers? If people actually stopped to read what had been written before deciding to add their tuppence-worth? If people stopped to think, "well, that's not how I would answer it... but it's good enough".
I see so many threads here where 58 people dive in to a thread to say, 'Me too'. Another 42 will dive in to say, 'that's not right' when actually it is. And another 137 or so will usually chime in to say nothing very much except to demonstrate that they didn't understand something that was explained a lot earlier on quite clearly. Threads go on and on, when actually all that was sought originally was a simple answer to a technical issue. God knows why it happens.
I have no problem at all being asked for clarification. I have no problem at all being corrected and having someone point out that actually that parameter doesn't exist, you made a typo, that's not the command to achieve X. When I am technically wrong, I would expect nothing less. But where so much of my time gets wasted is demonstrated in this thread perfectly. I answered the question in one post. It might not have been a perfect answer. There are many different ways of coming up with the answer on Windows, for example, and yet I didn't mention the registry at all or the Control Panel/System applet for checking environment variables once. And yet, despite all of that, in answer 1 there was sufficient information to make the OP happy. But no, that's not enough to shut some people up (and I am again not referring to you at this point).
I don't know what it is. Some sense of, maybe, in a democracy my opinion is as good as yours even if it's entirely unnecessary, potentially confusing and adds absolutely nothing to the outcome? A desire on the part of some people to boost their post numbers?
Too right I'm harsh. I am results-driven. I am here because I want to help others. Not because I think my opinions deserve a hearing even though the answer was posted ages ago. When I see something that looks like the opposite of that -grandstanding, look how clever I am, my opinion counts too- yeah, it annoys me somewhat. And largely because I usually end up having to untangle the confusion caused by unnecessary "contributions" from others.

How to generate report using toad in oracle 10g

Similar Messages

Maybe you are looking for