How to generate third fourth reports in alv interactive
Hey,
I am able to generate secondary report in alv interactive reports using USER_COMMAND. I want to know how to genrate third and fourth reports. I am trying to implement the form for third and fourth as i did in secondary report. But i am unable to genrate the third and fourth reports.
Kudos in advance
Hi,
Check this sample report..
TYPE-POOLS: slis.
DATA: BEGIN OF itab1 OCCURS 0,
vbeln TYPE vbeln,
END OF itab1.
DATA: BEGIN OF itab2 OCCURS 0,
vbeln TYPE vbeln,
posnr TYPE posnr,
END OF itab2.
DATA: BEGIN OF itab3 OCCURS 0,
vbeln LIKE vbep-vbeln,
posnr LIKE vbep-posnr,
etenr LIKE vbep-etenr,
END OF itab3.
DATA: t_fieldcatalog1 TYPE slis_t_fieldcat_alv.
DATA: t_fieldcatalog2 TYPE slis_t_fieldcat_alv.
DATA: t_fieldcatalog3 TYPE slis_t_fieldcat_alv.
DATA: v_repid TYPE syrepid.
v_repid = sy-repid.
Get the fieldcatalog1
PERFORM get_fieldcat1.
Get the fieldcatalog2
PERFORM get_fieldcat2.
Get the fieldcatalog3
PERFORM get_fieldcat3.
SELECT vbeln UP TO 10 ROWS
INTO TABLE itab1
FROM vbak
WHERE vbeln > '0060000600'.
IF NOT itab1[] IS INITIAL.
SELECT vbeln posnr
INTO TABLE itab2
FROM vbap
FOR ALL ENTRIES IN itab1
WHERE vbeln = itab1-vbeln.
SELECT vbeln posnr etenr
INTO TABLE itab3
FROM vbep
FOR ALL ENTRIES IN itab2
WHERE vbeln = itab2-vbeln
AND posnr = itab2-posnr.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_callback_user_command = 'DISPLAY_DETAIL'
it_fieldcat = t_fieldcatalog1
TABLES
t_outtab = itab1.
FORM display_detail *
--> UCOMM *
--> SELFIELD *
FORM display_detail USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
DATA: itab2_temp LIKE itab2 OCCURS 0 WITH HEADER LINE.
IF ucomm = '&IC1'.
READ TABLE itab1 INDEX selfield-tabindex.
IF sy-subrc = 0.
LOOP AT itab2 WHERE vbeln = itab1-vbeln.
MOVE itab2 TO itab2_temp.
APPEND itab2_temp.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = v_repid
it_fieldcat = t_fieldcatalog2
i_callback_user_command = 'DISPLAY_THIRD'
TABLES
t_outtab = itab2_temp.
ENDIF.
ENDIF.
ENDFORM.
FORM display_third *
--> UCOMM *
--> SELFIELD *
FORM display_third USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
DATA: itab3_temp LIKE itab3 OCCURS 0 WITH HEADER LINE.
IF ucomm = '&IC1'.
READ TABLE itab1 INDEX selfield-tabindex.
IF sy-subrc = 0.
LOOP AT itab3 WHERE vbeln = itab2-vbeln.
MOVE itab3 TO itab3_temp.
APPEND itab3_temp.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = v_repid
it_fieldcat = t_fieldcatalog3
TABLES
t_outtab = itab3_temp.
ENDIF.
ENDIF.
ENDFORM.
FORM GET_FIELDCAT1 *
FORM get_fieldcat1.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'ITAB1'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-hotspot = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
ENDFORM.
FORM GET_FIELDCAT2 *
FORM get_fieldcat2.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'ITAB2'.
s_fieldcatalog-rollname = 'VBELN'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'POSNR'.
s_fieldcatalog-tabname = 'ITAB2'.
s_fieldcatalog-rollname = 'POSNR'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
ENDFORM.
FORM get_fieldcat3 *
FORM get_fieldcat3.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'ITAB3'.
s_fieldcatalog-rollname = 'VBELN'.
APPEND s_fieldcatalog TO t_fieldcatalog3.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'POSNR'.
s_fieldcatalog-tabname = 'ITAB3'.
s_fieldcatalog-rollname = 'POSNR'.
APPEND s_fieldcatalog TO t_fieldcatalog3.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'ETENR'.
s_fieldcatalog-tabname = 'ITAB3'.
s_fieldcatalog-rollname = 'ETENR'.
APPEND s_fieldcatalog TO t_fieldcatalog3.
CLEAR s_fieldcatalog.
ENDFORM.
Thanks,
Naren
Similar Messages
-
How To Generate And Print Reports In PDF Format From EBS With The UTF8 Char
Hi,
I want to know How To Generate And Print Reports In PDF Format From EBS With The UTF8 Character Set in R12.0.4.
RegardsRefer to Note: 239196.1 - PASTA 3.0 Release Information
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=239196.1
Or, you can use XML Publisher.
Note: 551591.1 - Need Latest XML Publisher / BI Publisher Patches For R12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=551591.1 -
How to generate a csv report to determine paper size in a pdf or pdf/a file ?
how to generate a csv report to determine paper size in a pdf or pdf/a file ?
Use the cfpdf tag as follows:
<cfpdf
action = "getinfo"
name = "pdf_info"
source = "C:\temp\testFile.pdf">
My Operating System is Windows. This tag gets information about testFile.pdf, and stores it in a structure. I have given this structure the name pdf_info. This structure has the key you are interested in, namely, pageSizes.
Pdf_info.pageSizes is an array whose indices correspond to the respective page number in the PDF. You can use this to generate Comma-Separated Values (CSV) for each page.
<!--- Initialize CSV list --->
<cfset csv = "">
<!--- Add headers or first row, followed by carriage-return --->
<cfset csv = "Page,Height,Width" & chr(13)>
<cfloop from="1" to="#arrayLen(pdf_info.pageSizes)#" index="i">
<cfset row_info = i & "," & pdf_info.pageSizes[i]["height"] & "," & pdf_info.pageSizes[i]["width"] & chr(13)>
<cfset csv = csv & row_info>
</cfloop>
<!--- Output CSV --->
<cfoutput>#csv#</cfoutput>
<!--- Write CSV to file --->
<!--- <cffile action="write" file="C:\temp\output.csv" output="#csv#"> --->
Done! -
What i sthe diff b/w Interactive Report and ALV Interactive report
Hi All,
I want to know the basic diff b/w Interactive report and ALV interactive report.
Can any one tell me the exact diif.
Thanks in Advance,
Jdhi jagadish,
both are used for same purpose
interactive report means an output list which displays basic details & allows user to interact, so that a new list is populated based on user-selection. With interactive list, the user can actively control data retrieval and display during the session. a total no of 21 lists including main list are genearetd in interactive lists.
I suggest to use ALV.by using ALV we can display in Grid as well as list format.
Output format will be good . Sorting,Filtering facilities are provided by itself.We can have column headings also. using oops we can also do alv reporting.
if helpful reward some points.
with regards,
suresh babu aluri. -
What is the difference between interactive report and alv interactive repor
what is the difference between interactive report and alv interactive report
could u plz explain clearly.Hi Rajesh,
interactive report or alv interactive report , both are same but except the viewer, Abap List Viewer (ALV).
Here in i am placing a sample simple ALV Interactive report.
Just double click on the customer number to go to the next screen.
*& Report ZKAL_ALV_INTERACTIVE_1 *
REPORT ZKAL_ALV_INTERACTIVE_1 .
TYPE-POOLS: SLIS.
TYPES: BEGIN OF TY_KNA1,
KUNNR TYPE KUNNR,
NAME1 TYPE NAME1,
ORT01 TYPE ORT01,
END OF TY_KNA1.
TYPES: BEGIN OF TY_VBAK,
VBELN TYPE VBELN,
ERNAM TYPE ERNAM,
ERDAT TYPE ERDAT,
NETWR TYPE NETWR,
WAERK TYPE WAERK,
END OF TY_VBAK.
&--WORK AREA & TABLE DECLARATION--
DATA: W_KNA1 TYPE TY_KNA1.
DATA: T_KNA1 TYPE STANDARD TABLE OF TY_KNA1 INITIAL SIZE 1.
DATA: W_VBAK TYPE TY_VBAK.
DATA: T_VBAK TYPE STANDARD TABLE OF TY_VBAK INITIAL SIZE 1.
&--FIELDCAT TABLE & WORK AREA--
DATA: W_FCAT TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_FCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT1 TYPE SLIS_T_FIELDCAT_ALV.
&--EVENT TABLE AND WORK AREA--
DATA: W_EVENTS TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS TYPE SLIS_T_EVENT.
DATA: W_EVENTS1 TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS1 TYPE SLIS_T_EVENT.
&--COMMENT TABLE & WORK AREA--
DATA: W_COMMENT TYPE SLIS_LISTHEADER.
DATA: T_COMMENT TYPE SLIS_T_LISTHEADER.
DATA: W_COMMENT1 TYPE SLIS_LISTHEADER.
DATA: T_COMMENT1 TYPE SLIS_T_LISTHEADER.
&----APPENDING FCAT -
W_FCAT-COL_POS = 1.
W_FCAT-FIELDNAME = 'KUNNR'.
W_FCAT-SELTEXT_M = 'CUST. NO'.
W_FCAT-HOTSPOT = 'X'. "HOT SPOT HAND SYMBOL
W_FCAT-EMPHASIZE = 'C119'. "FOR COLORING THE COLUMN 1
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS = 2.
W_FCAT-FIELDNAME = 'NAME1'.
W_FCAT-SELTEXT_M = 'CUST. NAME'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 3.
W_FCAT-FIELDNAME = 'ORT01'.
W_FCAT-SELTEXT_M = 'CITY'.
APPEND W_FCAT TO T_FCAT.
W_FCAT1-COL_POS = 1.
W_FCAT1-FIELDNAME = 'VBELN'.
W_FCAT1-SELTEXT_M = 'ORDER NO'.
W_FCAT1-EMPHASIZE = 'C519'.
APPEND W_FCAT1 TO T_FCAT1.
CLEAR W_FCAT.
W_FCAT1-COL_POS = 2.
W_FCAT1-FIELDNAME = 'ERNAM'.
W_FCAT1-SELTEXT_M = 'NAME OF PARTY'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 3.
W_FCAT1-FIELDNAME = 'ERDAT'.
W_FCAT1-SELTEXT_M = 'DATE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 4.
W_FCAT1-FIELDNAME = 'NETWR'.
W_FCAT1-SELTEXT_M = 'ORDER VALUE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 5.
W_FCAT1-FIELDNAME = 'WAERK'.
W_FCAT1-SELTEXT_M = 'CURRENCY'.
APPEND W_FCAT1 TO T_FCAT1.
&--APPEND COMMENTRY--
W_COMMENT-TYP = 'H'.
W_COMMENT-INFO = 'CUSTOMER DETAILS'.
APPEND W_COMMENT TO T_COMMENT.
CLEAR W_COMMENT.
&--APPEND EVENTS TABLE--
W_EVENTS-NAME = 'TOP_OF_PAGE'.
W_EVENTS-FORM = 'TOPPAGE'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS-NAME = 'USER_COMMAND'.
W_EVENTS-FORM = 'SUB2'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS1-NAME = 'TOP_OF_PAGE'.
W_EVENTS1-FORM = 'TOPPAGE1'.
APPEND W_EVENTS1 TO T_EVENTS1.
CLEAR W_EVENTS1.
W_EVENTS1-NAME = 'USER_COMMAND'.
W_EVENTS1-FORM = 'SUB3'.
APPEND W_EVENTS1 TO T_EVENTS1.
SELECT-OPTIONS: CUSTNO FOR W_KNA1-KUNNR.
SELECT KUNNR
NAME1
ORT01 FROM KNA1 INTO TABLE T_KNA1
WHERE KUNNR IN CUSTNO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZKAL_ALV_INTERACTIVE_12'
I_BACKGROUND_ID = 'BIKE'
I_GRID_TITLE = 'CUSTOMER DETAILS'
IT_FIELDCAT = T_FCAT
IT_EVENTS = T_EVENTS
TABLES
T_OUTTAB = T_KNA1 .
FORM TOPPAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = T_COMMENT
I_LOGO = 'LOGO_ALV'.
ENDFORM. "END OF TOPPAGE SUB.
FORM SUB2 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
READ TABLE T_KNA1 INTO W_KNA1 INDEX FIELDS1-TABINDEX.
SELECT VBELN
ERNAM
ERDAT
NETWR
WAERK
FROM VBAK
INTO TABLE T_VBAK
WHERE KUNNR = W_KNA1-KUNNR.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZKAL_ALV_INTERACTIVE_12'
I_BACKGROUND_ID = 'KALEEM'
I_GRID_TITLE = 'LIST OF ORDERS'
IT_FIELDCAT = T_FCAT1
IT_EVENTS = T_EVENTS1
TABLES
T_OUTTAB = T_VBAK.
ENDFORM. "END OF SUB2.
FORM TOPPAGE1.
&--APPEND COMMENTRYOF SECONDRY SCREEN--
W_COMMENT1-TYP = 'H'.
W_COMMENT1-INFO = 'LIST OF ORDERS'.
APPEND W_COMMENT1 TO T_COMMENT1.
W_COMMENT1-TYP = 'S'.
W_COMMENT1-KEY = 'CUSTOMER'.
W_COMMENT1-INFO = W_KNA1-KUNNR.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT.
W_COMMENT1-TYP = 'A'.
W_COMMENT1-INFO = W_KNA1-NAME1.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = T_COMMENT1
I_LOGO = 'LOGO_ALV'
REFRESH T_COMMENT1.
ENDFORM. "END OF TOPPAGE1
FORM SUB3 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
READ TABLE T_VBAK INTO W_VBAK INDEX FIELDS1-TABINDEX.
SET PARAMETER ID 'AUN' FIELD W_VBAK-VBELN.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
ENDFORM.
U can also find some of the useful codes on WIKI-SDN.
Reward helpful Answers.
Regds,
Kaleem. -
Difference between Interactive report and ALV Interactive report.
What is the difference between Interactive report and ALV Interactive report.
i think there is no much difference the same Interactive report Events and functionality we will implement with ALV.
Experts guide me.Hi,
ALV interactive report gives many advantages than interactive report like sorting, summing and getting graphics.
An interactive report generally basic list displayed. User double clicks on any valid line or user selects a line and presses as button on the tool bar. Then the corresponding event is triggered
refer
http://www.sapgenie.com/abap/drill_down_reports.htm
You can find a interactive ALV report here
http://www.sap-img.com/abap/an-interactive-alv-report.htm
also refer
Below threads consist of number of interactive ALV codes:
interactive ALV code
ALV-INTERACTIVE.
Interactive ALV
Regards -
How to generate a project report for a BPM project in Oracle Jdeveloper 11g
Hi,
Till Oracle 10g we can generate a project report by right clicking on project name in BPM studio project navigator.
Is this facility available with Jdeveloper 11g for BPM project as I am not able to generate the report.
If this is possible than please let me know how can i generate.
Thanks
GGHi there,
I would also like to know when the Project Report functionality will be available for 11g.
My client have several BA's who are crying out for documentation and exported diagrams, which are exactly what the Project Report features provided.
Any ideas if it will come back?
Cheers,
Chris -
How to generate a PDF Report to print all records
Hi,
I have two fields on the page
1.Id
2.year
both are select list.
When Id and year is selected from the list a pdf report is generated showing the details of that particular ID.
I want to generate a pdf report for all Id's for a particular year rather than selecting each Id.
How to do it?
thanks,
Ven.Ven,
Your where clause should look something like this:
AND ( :px_id = '%null%'
OR id_code LIKE '%' || :px_id|| '%'
Your LOV for the id item should have Yes selected on Display Null and Null display value should have something like -- All Ids --
Jeff -
How to generate Top sales report from SAP data ?
Hello experts,
I am completely a newbie to SAP BO , can any one guide me how to generate TOP sales of the year report from SAP data ?Hi David,
First Let me know the Source & Tools to involve.
Let me go with the generic approach:
If the source is BW, then you can create the logic in query designer designer and then you can incorporate the data into the dashboard or webi or crystal report whatever its.
If the source is sql or anyother DB then it can also be achievable in crystal or webi to write the logic in top 10 values by ranking then you can incorporate the data into the dashboard, but here you can limit the top or bottom values.
Hope this helps, please revert for more clarifications on this.
--SumanT -
How to generate web traffic report on SharePoint 2013?
Hello All,
I am working on Intranet in SharePoint 2013 On Premise.
There are functionalities like Poll, Survey, Event, Announcements etc.
Now there is a requirement to create web traffic report for all these functionality. How should I generate web traffic report for all these?
Thanks in Advance.Hi Darsh,
Here is the out of box analytic reports you can view. Please refer to the following article.
SharePoint 2013 Analytics A Big Step Backward
New Analytics in SharePoint 2013
Please mark it answered, if your problem resolved or helpful. -
How to generate "Early watch report uisng sdccn"
Hi Guys,
Can any body please provide me brief knowledge on " how to generate an Early Watch Report using SDCCN"
infact i have searched in the forums but not very much clear.
Thanks,
LAXHi,
can you look at this
[EWA|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fnetweaver%2fs-u%2fsolutionManager4.0-HowtogenerateEWA%E2%80%99sFromSatelliteSystems.pdf]
[http://sapnetweavernotes.blogspot.com/2008/04/sap-earlywatch-alert.html]
[https://service.sap.com/earlywatch]
For taking EWA report through solution manager, you have to perform satelite system configuration. Please check the below link which have tutor files, related step by step documents for EWA.
[http://www.service.sap.com/rkt-solman]--> select ur component version --> <Technology Cons. & System Admin.> select EWA
763561 -- More information about SDCCN can be obtained here.
91488 --- SAP Support Services- Central preparatory note.
Regards,
Muralidhar -
How To Generate Early watch report Using SDCCN
Hi Guys,
Can any body please provide me brief knowledge on " how to generate an Early Watch Report using SDCCN"
infact i have searched in the forums but not very much clear.
Thanks,
LAXThis may not be the appropriate forum for this question. You may want to consider posting your question on the SAP NetWeaver Administration forum instead.
Having said that, the following may help:
OSS Note 763561 - Service Data Control Center (SDCCN) - FAQ -
How to generate XML Publisher report from PLSQL Stored Procedure in APPS
Hi,
I have concurrent program of type PLSQL Stored procedure.I need to generate XML Publisher report from the same.I have changed the output of the concurrent program as "XML" but when I tried running it,the XML tags are not generated.Due to this I am unable to create the template.Its a urgent issue.
Please help me out .
Thanks in advance.
KaveriHi Kaveri
Sadly there is nothing magic about that output field. The only program type that you can flip it to XML and then magically get XML is for Oracle Reports. For plsql you will need to recode the plsql to generate XML rather than text that you have now.
You have some options, best option first:
1. Move the sql to a data template - check the user guide and blog for help or
2. Use SQL XML or XMLGEN (not great for large datasets) or
3. Use dbms_output.put_line and write the XML file manually - not performant at all
Regards, Tim -
How to generate a MSDS report from status GP (Generation possible) to RE
Hi EHS Goeroes,
I'm struggling with the Generation of the MSDS. I have done the following procedure and settings:
a) Create MSDS report (CG42)
b) Edit Generation Variant (CG2B)
Settings:
(I have assigned my template to the Generation Variant)
Generate manual request automatically: marked
Change Marks: 0
Initial release status: RE (released)
Version requirement: unmarked
Set historical automatically: unmarked
c) EHS > Specification Workbench > Report from Template (to test the design - display is correct and all phrases can be found)
d) EHS > Specification Workbench > Create new report
(report has been created succesfully and appears in Report Management).
e) EHS > Specification Workbench > Report Management:
MSDS_29 Material Safety Data Sheet for China World
Chinese Not Relevant Generation Poss. => generation possible.
Feedback affter clicking on Accept: You tried to carry out action 'Accept' on a report with status GP. However, this action is not allowed for reports with this status.
Feedback after clicking on Generate: You tried to carry out action 'Generate' on a report with status GP. However, this action is not allowed for reports with this status.
d) SE38 I have no jobs scheduled yet, so I run the following two programs to start the worklist manually, RC1AVGE1 and RC1AVGE2.
RC1AVGE1 - gave allot of feedback information regarding to changes and so on (first time I run it).
RC1AVGE2 - feedback: EHS: 'Worklist Generation for Reports - Selection for Check. - 0 reports to be checked were found'
From my understanding program RC1AVGE2 - should generate the MSDS.
e) WWI - monitor display (CG5Z):
100 @03\QNo background processes in client@ 5 SBR WWI-00000000000000000002 FREE RMDERKS
110 @03\QNo background processes in client@ 5 SBR WWI-00000000000000000063 FREE A132645
xxx SV001 @5B\QWWI server is active@ @02\QNo background processes on WWI server@
xxx SV003 @5C\QWWI server is inactive@ @02\QNo background processes on WWI server@
I checked if I had any jobs running in the background or has been finished, but it seems like it goes wrong here, the system does not generate a job for the generation of the MSDS_29. To be able to get the status of MSDS_29 to RE (Released).
Does anybody has an idea what I do wrong, or which settings might be incorrect? Futhermore, what are the further steps to issue the report in the SD module - report shipping?
Help is much appreciated!
Roy DerksHi Roy,
Check and activate the QWWI server for the second job wwi - 110. Try once to generate the MSDS.
I will revert back if i get information.
regards,
mahesh. -
How to generate a single report using multiple Databases
Hi All
Is it possible to create a single report using multiple databases
I am working on Database A to generate reports usually,, but now i have a second database for which the data is coming from flat files now i have to use few tables from
Database B to generate a single report,,,,, can any one help with the processHi,
i didn't see this properly in your post:
but now i have a second database for which the data is coming from flat files if you have ETL then make flat files as source then create target tables in db:B itself.. .Now, import them in the rpd..
If not, import both those tables into rpd with different connections..
Create physical joins by selecting those tables and perform joins operations over db's in physical layer..
Maybe you are looking for
-
I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!
-
What language would suit someone who hates anything that isn't PHP?
Psst. Yes, this message is long, but so are my requirements. Please take the extra few seconds to read it First it was QBasic, then QuickBasic, then, of all things, Visual Basic... version 1.0. On Win98. Then XP. I made a lot of stuff with VB. 500 do
-
Hello, Before to use remote assistance in windows 8.1, i need to configure my nat router freebox. But remote assistance ( msra.exe ) use a dynamique port and never the same. How to use a fixed port for remote assistance ini windows 8.1 ? And why i ca
-
Help neede urgently(Problem in adding exponential numbers)
Hi, Actually i want to add the contents of two files which contains exponential numbers. i'm not able to add these numbers. Can any one help me? import java.io.*; import java.nio.*; class userFile public static void main(String[] args) throws I
-
Networking or sharing files between 8.6 and 10.3.9 computer systems
I need information about computer file sharing. I have an iMac with 8.6 and an iBook with 10.3.9. What do I need to do to make the two talk to each other, so I can share files and printers? They both work independently, although the 8.6 is no longer