How to get 0PERS_SAREA description in cube

Hi
  I have a char 0PERS_SAREA (Personnel Subarea)  of length 4 and TYPE:CHAR .
When Click On Its Maintain Masterdata Button
Its shows me 3 columns
1) Persnonnel Area , 2) Personnel SUBAREA & 3)Short descreption of Personnel Subarea.
When I Moved this Char Personnel SUBarea to Cube, I able to see only Personnel SUBAREA and Not Its description..Is there any option Do i have  to select  In PSubAREA Tabs to see its descrption in the cube which is of length 14
Thank you,

Hi Sandy,
Try to see its text table and see if short text and long text both are filled. Then, check the Bex setting of the info object. Change the text type from default to short text or long text based on what you observe in the text table of the info object. Also change the Bex description to short or long accordingly. Activate the IObj. You must be able to see the text in the queries. Hope it helps.
Thanks and Regards
Subray Hegde

Similar Messages

  • How to get Worksheet Description from SQL

    Hi,
    Can any one help me out. How to get Workbook and Worksheet Description from SQL. I have entered these descriptions from Discoverer Plus.
    Thanks in advance.

    check this !!!! at least it a starting point
    Thread: Where in the EUL schema can I find metadata on worksheets
    I followed this steps:
    Use the following steps to get the Trigger Working:
    1. Login as EUL owner EUL10
    Create a test table
    CREATE TABLE eul10.TRIG_TAB
    ACC_DATE DATE,
    sso_name varchar2(100)
    2. Create a function under the eul schema owner: eul_trigger$post_login
    Do not pass any argument to the function.
    Return a number from function.
    CREATE OR REPLACE FUNCTION EUL10.EUL_TRIGGER$POST_LOGIN
    RETURN NUMBER AS
    BEGIN
    insert into EUL10.TRIG_TAB(acc_date) values(sysdate);
    commit;
    RETURN 0;
    END;
    3. Login with Discoverer Administrator to EUL=EUL10.
    4. Check the Menu > Tools > Default EUL.
    Make sure this is set to EUL10
    If not then change the EUL10 and restart Discoverer Administrator.
    5. Now Register the trigger in Discoverer Administrator
    Menu >Tools > Register PL/SQL Function ...
    6. Click import
    7. Select the trigger EUL10.eul_trigger$post_login
    |8. Make sure the display name is eul_trigger$post_login (MUST BE lowercase or it will not work)
    Function name must be in uppercase: EUL_TRIGGER$POST_LOGIN
    9. Make sure the the return type is number and that no arguments get passed.
    10. Validate the Function by clicking on the Validate button.
    11. Click ok
    12. Connect with Discoverer desktop as EUL owner.
    13. We see entries in the table trig_tab with the current date.
    ...... metalink note : 372067.1 Subject: How To Get the EUL_TRIGGER$POST_LOGIN Trigger to Work

  • How to get report symbol in cube

    Hi Experts,
    In one of my cube not showing report symbol (only for new request) so how to get the report symbol.
    Regards,
    Siva

    Hi there,
    Do you see the status of the request as green (green icon)?
    If so, but still don't see the report symbol, that's because you probably have aggregates in that InfoCube that you haven't done the roll up.
    Therefore, go to the tab Rollup and in the request ID make sure you have that last request (you can click F4 and choose it) after that click on execute. You'll have to wait the roll up is finished (can control it under transaction sm37) and afterwords your request will be ready for reporting.
    Diogo.

  • How to get field description for custom field just like orgeh in SQ01 Repor

    Good Day Friends,
    I want to share one of my issue with you.Hope you will resolve it easily .
    I have enhaced standard infotype 0001 to maintain JOB CODE field, i also have maintained the
    JOB CODE, JOB CODE DESCRIPTION in one custom table  ( ZHR_JOBDISC ) .
    I have given farigen key relation between this custom table ( ZHR_JOBDISC ) and PA0001. i also have created one search help and assigned to the Field JOB CODE.
    But when i am trying to write the query in SQ01 . i am unable to fetch description.
    if you observe the standard fields position (PLANS), Organisational Unit (ORGEH).while writing query if you right click on PLANS will show the description of position, similarly  if you right click on ORGEH it will show the description org unit.
    but i am unable to get the description of my custom field.
    Please give clarification where i am doing wrong ?

    Good day Ravindra,
    Please, could you consider as reference notes 367585, 332842 and 491403.
    This is well described in the documentation for the interface of IF_TEXT_IDENTIFIER.
    Transaction SE24, enter IF_TEXT_IDENTIFIER, Display' function and check
    the 'Interface documentation'. Please choose "HR Class" upon executing for Text Recognition.
    Additionally check the following website:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/d9/9958e0c50a11d396f80000
    e82de14a/frameset.htm
    Hope this information helps.
    Kind regards,
    Graziela

  • How to get material description from material number.

    Hello ABAP Pundits,
    I have got the material number MATNR.
    I need to get Material Description MAKTX using this material number.
    Now MAKTX is not a table that I can go and fetch it.
    What function module do I require to fetch that material description field ?
    Points will be surely awarded..
    Tushar.

    Do a select against <b>MAKT</b>.
    parmaters: p_matnr type mara-matnr.
    data: xmaktx type makt-maktx.
    Select maktx into xmaktx from makt
              where matnr = p_matnr
                and spras = sy-langu.
    Regards,
    Rich HEilman

  • How to get DDL descriptions of DDIC tables?

    Hi,
    for a replication scenario of ERP data into BOBJ BI on Demand we have to define data schemas in the BI oD MS SQL Server. Instead of doing that manually, we could also import DDL (data definition language) descriptions of the ERP DDIC table to replicate into the SQL Server.
    The question is: Is it possible to generate or extract DDL descriptions of database tables defined in the ERP DDIC and if yes, how (e.g. inside ABAP or using DB tools)?
    Thanks for any assistance,
    H-D

    Hi,
    if you use SQL2005 or SQL2008 you can try SSMS to generate the DDL statements. Just expand your database <SID> and apply a filter on the tables tab. If you right click on a specific table you have the option to 'Script table as' -> 'Create to' -> 'New Query Editor Window'. That way you will get the CREATE TABLE statement.
    Regards,
    Sven

  • In MB1B how to get Material description?

    Gurus,
    At the time of making 541 movement through MB1B referencing the PO, system should show the material Description also.Presently system shows only the Material Code but not the Material description.
    How do I get the Material description in MB1B along with material Code.
    SN

    Dear,
    Better to Use ME20, to issue stock to vender. It gives u Full Description of Issunig Material.
    Reagrds,
    Pardeep malik

  • How to get data from BW Cube to Another File system?

    Hi,
    I have a requirement to get the sales data from BW system(infoCube) to another file system as XML file using XI as a middleware. Can anybody give the suggestions on this please?
    Thanks & Regards,
    Satish

    Take a look at the following document. You will get a fair idea how to integrate BW and XI.
    BW > XI
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate bw via xi.pdf
    XI> BW
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how to push data into bw from xi.pdf
    regards
    SKM

  • How to get data in a cube in transfer routine

    i have to get some data from another cube to compute some numbers in a transfer routine
    is there some function modules to do this?
    thank you for your help

    Hi Zelphar,
    You can use this function : RSDRI_INFOPROV_READ
    In ur routine ..
    And there is sample of code regarding that, you can open :
    1. t-code se38
    2. Open this program: RSDRI_INFOPROV_READ_DEMO
    Hopefully it can help you a lot .
    Best regards,
    Niel.

  • How to get activity description from network number and activity numbet

    Hiiii....
    I have the activity number and network number obtained from AFPO table which is order detail (Network Detail) table. Now i need to get the actvity dexcription... Kindly help me to get that..
    Thanking you,

    Hi,
    the short text of the activity is stored in table AFVC. The key of this table AUFPL and APLZL i. e. the internal network number and activity number. The external position number is field VORNR.
    Kind regards
    Peter

  • How to get profit center group and its description

    According to three tables(as below), i get profit center group, how to get its description&#65311;
    CEPC  (Profit Center Master Data Table)
    SETLEAF
    SETNODE
    PS:(Referrence to teh link fields in table)
    For Profit centre Group ( SETLEAF-SETNAME )
    Select BSEG-BUKRS / BSEG-PRCTR from BSEG.
    SELECT SINGLE SETNAME INTO WA_SETNAME
    FROM SETLEAF
    WHERE SETCALSS = '0106'
    AND SUBCLASS = BSEG-BUKRS
    AND VALFROM = BSEG-PRCTR
    i can get two records, why?

    Hi,
    I am not sure of the significance of this table...
    But looking at the table structure it is having LINEID as one of the key fields..
    So you can have more than one record for the same combination..
    Thanks,
    Naren

  • How to get u00BBshort descriptionu00AB  field in structure u00BBBAPIDFKKCLu00AB in local la

    Hello
    I wander how to get »short description«  field in structure »BAPIDFKKCL« in local language »SK«(Slovakia).
    In SMLT transaction I tried several combination of supplementing Language »SK« (with »EN«) none with success. 
    What do you propose? Which combination of parameters in SMLT for substitution do you propose?

    Hi jan Bo ,
        Did you check the option expert mode:
        If you want to supplement a more precise selection of tables, application tables, for example, use the expert mode of the language supplementation program.
    Proceed as follows:
    1. Choose the following for the language that you want to supplement: Language u2192 Special Actions u2192 Supplementation (Expert).
    2. On the next screen, enter a description of your supplementation. This helps you to recognize the supplementation you have started in the transaction SMLT overview.
    3. In the center of the dialog box, you can specify conditions for selecting the tables you want to supplement. These fields are set with SAP defaults, however, you can change them by choosing Change. The default is set so that if you are logged on to client 000, all cross-client and client-specific tables are supplemented in client 000. In other clients, only the client-specific tables in the logon client are selected for supplementation.
    4. The tables that you want to supplement appear at the bottom of the screen, according to the selection you made by choosing Select. Each table is shown with its table class, a description, the supplementation mode, and the client in which the table will be supplemented. You can use the appropriate pushbuttons to change this list, however, we recommend this for experienced users only.
    You can find this with link :
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ac5b5193-0701-0010-45a7-98dd573a6785
    under section :
    6.2 Language Supplementation................................................................14
    6.2.1 Starting Language Supplementation..........................................................................15
    6.2.2 Language Supplementation (Expert Mode)................................................................17
    Could you please also check the the below post :
    Re: Complete Language Supplementation ?
    chek the below link for search.... it would also help you for next search
    https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=supplementingLanguage&adv=true&sdn_author_name=&sdn_updated_on_comparator=GE&sdn_updated_on=&start=11
    i also suggest you to check with target client on which you installed language at last.
    Regards,
    S.Manu.

  • How to get Description of parameter filed in Crystal report 2008

    Hi expert,
    I am creating a crystal report from Query ,which is created in BEX    Query designer 7.
    In query designer i have some selection variable.
    The requirement from clint is that they want to see what value is selected for all  variable.
    when i tried to put all parameter field in crystal report it is showing only Technical name of value selected not  description and also it show only for variable which is single value variable  not for the range value variable and multiple selection variable.
    can any one help me How to get description of value in report and can it is possible to show Range value and multiple value for a particular variable .
    i am using Crystal report 2008 SP3 version.
    Thanks and regards
    devendra

    Moved to BEx forum

  • HOW CAN I GET A DESCRIPTION OF ALL OF THE FRATURES IN lION 10.7.4

    How can I get a description of all of the programs that came with my mac pro without spending an arm and a leg?

    This is a good place to start and follow the links to all the Mac 101 articles.
    http://www.apple.com/support/mac101/
    Regards,
    Captfred

  • How to get rid of No Value in Olap cube based SSRS report

    hi there, I am trying to create a report based on SSAS cube.  As you can see, some returns 0 while some does not return anything. This actually messed out the border style as well... Any idea on how to get rid of this? 
    thanks
    --Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

    Hi  Cat_ca,
    Are you using SQL Server Reporting Services 2000? Currently, we do not have SSRS 2000 test environment, and SQL Server 2000 was out of support since April 2013.
    I have tested it on SSRS 2008 R2, everything works fine. It display nothing on the cell for the NULL value. Please refer to the screenshot below.
    In your scenario, to avoid this issue you can use NonEmpty function in your query to remove the NULL values.
    NonEmpty (MDX)
    If I have anything misunderstand, please point it out.
    Regards,
    Charlie Liao
    TechNet Community Support

Maybe you are looking for