How to get a Field for Selection in 8 Datasource

Hello All,
We have a scenario where in we need to change the Generated Export Datasource (8Z******) and check one more field for Selection, so that it appears in the Data Selection tab in InfoPackage.
But I am not able to do that. I tried to change the transfer Structure for the same but to no luck. I also tried to change the Data Source in RSA6, but even that dint helped.
In Ideal cases it should have taken all the Characteristic fields as Selection when the Export DS is generated, but for this particular case it took only 6 fields by default. I need to have one more field.
Can anyone help me with this..??
NOTE: We are working on 2004s.
Regards
Rohit Rakhan

Hi,
for Export DataSources, you can only use selections for Full-Update mode, when using the 3.x functionalities.
But in 2004s, you can assign selections in your DTP.
So the you'll export via export DataSource into the PSA and then perform selections via DTP onto the PSA-Data.
hth
Cheers
Sven

Similar Messages

How to Make field for selection in the datasource.

Hi All,
I want to enable one field in the DataSource for selection. I am not getting where can we make that enable.
I know we have one check box in transfer structure for make file for selection. But I am getting that is grayout , not able to check that ?
Please let me know where can we change the setting to make it enable.
regards
Ashutosh D

Look at Roberto's reply in the below post :
Re: Hos to make a filed to be required field when creating datasource
What is ur datasource ..?
Have u tried RSA6 Change Mode for that datasource - Flag Selection?
Message was edited by:
Jr Roberto

How to get a value for Select One Choice in the backing bean

Friends,
Does any one have any idea, how to get the value of a selected item value from the Select One Choice component in the backing bean iin valueChangeListener method. Right now I am always getting the sequence of the selected item, instead the actual selected value. I tried using 'ValuePassTrhough=true' also.. but didn't help
Below is the my code snippet
<af:selectOneChoice value="#{bindings.country.inputValue}"
required="#{bindings.country.hints.mandatory}"
shortDesc="#{bindings.country.hints.tooltip}"
id="soc1" autoSubmit="true" valuePassThru="true"
valueChangeListener="#{pageFlowScope.Bean.onValueChange
<f:selectItems value="#{bindings.country.items}" id="si2"/>
</af:selectOneChoice>
Thanks in advance.

check my other post at Re: Pass data from a variable to another page

How to make a field under Selection column in DataSource from dimmed to ...

We try to make an InfoObject shows up in Data Selection of an InfoPackage to restrict the data load based on the range of this InfoObject. In order to do this, we will have to go to the source system to run RSA6 to edit the datasource to make this field checked under the Selection column. However when we get to the screen, find this field's Selection column is dimmed. Is there anyway to make it from dimmed to editable that it can be checked?
Thanks

hi Kevin,
try to check table ROOSFIELD, fill OLTPSOURCE with your datasource name and OBJVERS 'A', what's the value for SELECTION ? you may change the value with 'X'.
use abap code :
UPDATE ROOSFIELD SET SELECTION = 'X'
WHERE OLTPSOURCE = 'datasource name' AND OBJVERS = 'A'.
can i know your datasource name (if it's business content) ?
Properties of a DataSource Field
If a request for a DataSource is scheduled in the Business Information Warehouse, selection conditions are specified across certain fields. The property that determines whether a selection in BW using a field
is possible or required is established in the DataSource in the Source System.
In addition, the visibility of the field in BW can be set.
A field that is not visible (or that is hidden) cannot be transferred into the transfer structure.
Definition of the individual values:
'A': Field is hidden in OLTP and BW, property cannot be changed the customer.
'M': The DataSource requires a selection across this field before it is able to extract data (Required field for the generation of a request); property cannot be changed by the customer
'X': The Data Source can select across this field. The customer can change selections and visibility (the field is currently visible and selectable, compare with 'P', '3')
'1': Pure selection field for the DataSource. The customer can change the selection, but not the visibility (the field is currently selectable , compare with '2').
'2': Pure selection field for the DataSource. The customer can change the selection, but not the visibility (field is currently no selectable, compare with '1').
'3': The DataSource can select across this field. The customer can change selection and visibility (the field is currently not visible not selectable, compare with 'P', 'X')
'4': The DataSource cannot select across this field. The customer can change visibility (the field is currently not visible, compare with ' ')

How to get accurate values for select statement using single column

Hi All,
Below is my query which runs fine
Select Distinct Top 4
FiscalYearId,
FiscalMonthOfYearId
From ODS.Common.tODS_Date
Inner Join
UTL.Utility.tUTL_ProcessDate
On tODS_Date.DateShort < tUTL_ProcessDate.ProcessDate
And tUTL_ProcessDate.DatabaseName = 'ODS'
Order By
FiscalYearId Desc,
FiscalMonthOfYearId Desc
Below is the generate output
FiscalYearId FiscalMonthOfYearId
2014 2
2014 1
2013 12
2013 11
But i want to use this query in one of my where clause condition as its being used in the where clause it can only return 1 row.So, i tried something like this
Select Distinct Top 4
FiscalMonthOfYearId
From ODS.Common.tODS_Date
Inner Join
UTL.Utility.tUTL_ProcessDate
On tODS_Date.DateShort < tUTL_ProcessDate.ProcessDate
And tUTL_ProcessDate.DatabaseName = 'ODS'
Order By
FiscalMonthOfYearId Desc
And the result set of this one gives me the output like
FiscalMonthOfYearId
12
11
10
9
Which is not correct,( if you see the result set above).
Can someone please help me with any ides on this.

If you want to use this query in the WHERE clause, then use it with EXISTS option which allows to return more than 1 column.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Field for selection-generic data source

Hi All,
I have created a generic datasource with 4 fields from VBPA table the fields are
VBELN
PARVW
PERNER
POSNR
and set the delta based on VBELN.
My client want all the fields for slection in RSA3.
Now in RSA3 except VBLN all fields are available for selection.
I tried to select the VBLN field in RSA6 there i can see the selection box is disabled.
Could any one please let me know how i enable this field for selection
Many thanks in advance and pls respond to this as it is very urgent
Thanks
S VR

Hi..
Check whether any one had collected this extractor in Transport.. which is why its in display mode...
And also.. get into change mode in RSA6 for ur DS and then check if u can see that check box is enabled for u?
Let us know the details..
Thanks
Hope this helps

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

How to get item field values for old versions?

I need to be able to query old field values from previous versions of items in a SharePoint list. I can't execute code on the server (it needs to work with SharePoint Online/O365 for a start).
So far the ONLY API I've that lets me do this is the lists.asmx GetVersionCollection SOAP call.
This lets me specify a single field name and returns an XML structure with the values for the various versions, along with the modification time and who made the change - but NO reliable way of actually identifying *which* version (i.e. an ID or label). That
is, if I know I need to fetch the Title value from version 512 ("1.0") of item 1 in list "Documents", I don't see how to reliably parse the results to determine which entry is version 512. While they may be returned in order, in many cases
the entries are actually missing when there was no field value present (or perhaps when the field hadn't been created yet). I've tried comparing the Modified date to the Created date of the corresponding FileVersion item (which I can get via CSOM or REST),
and while it works some of the time, it's not reliable. I've also looked at the output from the lists.asmx GetVersion API but I don't see how that's useful either, as the Created property for all versions always seems to be just the date the file was originally
created.
It does seem odd to me that there's not a neat way of doing this - if I need to return information for several fields but just for a single version, I have to make a whole lot of requests that return far more info than I need, and then I need to figure out
how to parse the returned text in the case of, say, multiple-value taxonomy fields etc.
Anyone tried doing anything similar here?
Thanks
Dylan

try these links:
https://support.office.microsoft.com/en-us/article/Track-and-view-version-information-for-SharePoint-list-items-2d69d936-fb0b-4c84-830e-11708e6ec317?CorrelationId=f87cf6ea-8cbf-446a-a4a0-e2c3a86b3425&ui=en-US&rs=en-US&ad=US
https://social.technet.microsoft.com/Forums/en-US/e48ff216-7ed1-4b20-9f21-d496b1583eea/how-to-get-item-field-values-for-old-versions?forum=sharepointdevelopment
http://sharepoint.stackexchange.com/questions/20019/get-meta-data-from-a-previous-version-of-a-document-through-webservice-in-moss-2
http://sharepoint.stackexchange.com/questions/121594/getting-information-from-previous-versions-of-a-sp-list-using-csom
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

How to get a field that using variable in order to create a query

Hi,
I found a difficulty when creating a query. so, I would like to ask you some question.
1. How to get a field that using variable which that field I want to put it in my query?
For example, I would like to take quantity field in inventory audit report. And when I put my cursor in
quantity field, there was only variable, item, etc. How to get this and put it in query?
2. How to combined the invoice quantity with inventory audit report quantity?
3. I have a query like this:
SELECT distinct T0.[DocDate] as 'Tanggal', T0.[DocNum] as 'No.Faktur', T1.[ItemCode] as 'Kode Barang',
T1.[Dscription] as 'Deskripsi', T1.[Quantity] as 'Quantity', ((T1.[LineTotal])/(T1.[Quantity])) as 'Harga
Satuan', T1.[LineTotal] as 'Harga Total', T3.[CalcPrice] as 'HPP Satuan', ((T3.[CalcPrice]) * (T1.
[Quantity])) as 'HPP Total', T4.[ItmsGrpNam] as 'Jenis Barang', T5.[SlpName] as 'Nama Sales', T1.
[WhsCode] as 'Kode Gudang' FROM [dbo].[OINV] T0 INNER JOIN [dbo].[INV1] T1 ON T0.DocEntry =
T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OINM T3 ON T2.ItemCode
= T3.ItemCode INNER JOIN OITB T4 ON T2.ItmsGrpCod = T4.ItmsGrpCod INNER JOIN OSLP T5 ON
T0.SlpCode = T5.SlpCode WHERE T3.[TransType] = '13' and T3.[CreatedBy] = T1.[DocEntry] and T0.
[DocDate] >=[%0] and T0.[DocDate] <=[%1] and T4.[ItmsGrpNam] =[%2] and T1.[WhsCode] =[%3]
Is it possible if I just take one invoice with invoice quantity and only show up at once although I have a
lot item cost for that item? (because I'm using FIFOmethod).
Please help me.. cause I'm stuck with this thing :l.
Thank you very much, and I'm waiting your respon soon.
Regards,
Sisca

Try this one:
SELECT distinct T0.DocDate as 'Tanggal', T0.DocNum as 'No.Faktur', T1.ItemCode as 'Kode Barang',
T1.Dscription as 'Deskripsi', T1.Quantity as 'Quantity', ((T1.LineTotal)/(T1.Quantity)) as 'Harga
Satuan', T1.LineTotal as 'Harga Total', T3.CalcPrice as 'HPP Satuan', ((T3.CalcPrice) * (T1.
Quantity)) as 'HPP Total', T4.ItmsGrpNam as 'Jenis Barang', T5.SlpName as 'Nama Sales', T1.
WhsCode as 'Kode Gudang'
FROM dbo.OINV T0 INNER JOIN dbo.INV1 T1 ON T0.DocEntry =T1.DocEntry
INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode
INNER JOIN OINM T3 ON T2.ItemCode = T3.ItemCode AND T3.TransType = '13' and T3.CreatedBy = T1.DocEntry AND T3.Warehouse = T1.WhsCode
INNER JOIN OITB T4 ON T2.ItmsGrpCod = T4.ItmsGrpCod
INNER JOIN OSLP T5 ON T0.SlpCode = T5.SlpCode
WHERE T0.DocDate >=[%0\] and T0.DocDate <=[%1\] and T4.ItmsGrpNam =[%2\] and T1.WhsCode =[%3\]
Thanks,
Gordon

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

How to get the date for the first monday of each month

Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AM

Use IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
        trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
          select add_months(date '2013-1-1',level-1) dt
            from dual
            connect by level <= 12
select dt first_of_the_month,
        trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY.

How to get column names for a specific view in the scheme?

how to get column names for a specific view in the scheme?
TIA
Don't have DD on the wall anymore....

or this?
SQL> select text from ALL_VIEWS
2 where VIEW_NAME
3 ='EMP_VIEW';
TEXT
SELECT empno,ename FROM EMP
WHERE empno=10

How to get the field COMPLETION in extract layout

Hi,
Does anyone knows How to get the field COMPLETION in extract layout? i have not been able to find it and it is imperative to have it for implementing a new evaluation.
Thanks a lot for your help.
CAMILO URIBE

Hi Neil,
The following steps describe what we did to get the new evaluation:
1. Define Attributes and Object Types for Evaluations: here we added a new field for evaluation. The field was COMPLETION (degree of processing in percent), with relevant object "TASK". "No Summarization" was configurated as Rule for Summarization
2. Define Extract Layouts: here we created a new extract layout for evaluation. The objects and attributes to be used were defined (the field COMPLETION was defined as attribute).
3. Assign Extract Layouts to Project Types.
4. Define Evaluations: the new layout for evaluation were created using the attributes.
5. Define Severity.
6. Define Threshold Values. In the new evaluation the field COMPLETION was used in the formula.
After configurating and testing, we have noticed that the values of field COMPLETION are not taking into account. It does not matter which value it has, evaluation always take 0.
Thanks for your help,
CAMILO URIBE

How to get a Field for Selection in 8 Datasource

Similar Messages

Maybe you are looking for