E-Recruiting - BSP Application name from E-Rec portal URL

Hi,
How can we find out the name of the BSP application from the E-Rec portal URL? I need to do a change to the activity and unable to locate the exact BSP application name for that. Any help will be greately appreciated.
Thanks in advance.
Naresh

Hello Naresh,
If you want to integrate the BSP application and want to know how this application is generated, then you can have a look over the Report rcf_generate_url, This generates the URL for Recruiter, Candidate etc.
otherwise If you want to see which application is running then you have to check with the application starting with HRRCF.
Best Regards,
Deepak...

Similar Messages

How to call custom BSP application (copied from standard)

Hi,
I came across 1 interesting link in SDN.
[Enhancement procedure of BSP application HRRCF_RECRUITER in eRecruitment]
My requirement is also similar.
I need to copy the HRRCF_TRM_SRCH application.
I know how to make the changes for the logic (like copying the standard controller & iterator class etc.)
But I donu2019t know how to call the custom BSP application.
One requirement is, I need to call a BSP application, in which there are only UI(user interface/screen) changes .
That is, if there are only changes made to hitlist_cand.bsp page . And no changes made to hitlist_cand.do page.
Eg: Removing one button from screen.
Second requirement is, I need to call a BSP application in which there are logic changes also.
(I know how to change the standard controller class to custom class)
Eg: Changing logic of button.
We tried renaming the application name from standard to custom one (with Namespace=SAP itself, though it gave a warning) in the table T77RCF_LOG_APPL .
Then we used this name to configure the start page link. But still the execution control is going to standard page & not to custom BSP application.
How will I know which BSP application(Appl A), is calling the BSP application (Appl B) in which I want to make changes ?
The starting application is HRRCF_START_INT.
Would really appreciate solutions posted.
Thanks,
Nisha Vengal.

Hi Nisha,
I think you have an issue to call custom BSP.
- Ignore the warning message (in the table T77RCF_LOG_APPL) as it is just a warning message. I did not touch start page link at all.
- Additionally you need to make (I had to made) an entry in table u2018V77RCF_SMG_NAVIu2019.
Let me know, if you need anything else.
...Naddy

How To Remove A Specific Application Name From The "Open With" Dialog

When you right click on a file you are presented with the "Open With" menu item and you are also presented with a list of applications that could potentially be used to open that file.
In my case, when I click on a file of type .mov I am presented with the name of an application that I want to remove from the list, because that application ( Miro.app (2.5.2) ) no longer exists on my system.
What is the best way to remove that application name from the list?

Ok, but how does one remove some of the applications that are appear in the context menu for a given file type? Is there an asc file which can be edited?
For example, in my system a PDF can be opened with over 10 applications. I would like to see just the three ones I use: Acrobat, Skim and Preview.
Thanks in advance.

Retrieve applications name from config.xml

Hello everybody.
Is there a way to retrieve all applications name from config.xml?
Is there a HelperClass from BEA to do this task for me?
Thanks.

Please make reference to WebLogic MBean at
http://e-docs.bea.com/wls/docs81/jmx/index.html
<Denilson Marcos> wrote in message news:[email protected]..
Hello everybody.
Is there a way to retrieve all applications name from config.xml?
Is there a HelperClass from BEA to do this task for me?
Thanks.

E-Recruiting BSP iView errors in the Enterprise Portal.

I am trying to get my e-Recruiting BSP applications to work correctly in the Portal. But unfortunatley I consistently get this error message.
The following error text was processed in the system:
BSP Exception: Das Objekt application.do/start in der URL /sap/bc/bsp/sap/hrrcf_start_int/application.do/start?sap-syscmd=nocookie&sap-client=&sap-language=en&sap-accessibility=&sap-ep-version=7.00.200611091758&sap_ep_version=7.00.200611091758&sap_ep_baseurl=http%3A%2F%2Fsnocfpd1.myco.org%3A50100%2Firj ist nicht gültig.
The BSP
https://snocfrd1.myco.org/sap/bc/bsp/sap/hrrcf_start_int/application.do?rcfLogAppl=SEARCH_JOBS
works fine.
anybody have any ideas how to troubleshoot this? I'm assuming it has to do with all the rest of the garbage parameters the Portal is sending to e-Recruit.
-Tim

Hi!
Obviously the BSP iView is configured wrong. Have closer look at the URLs:
BSP in native browser:
https://snocfrd1.myco.org/sap/bc/bsp/sap/hrrcf_start_int/<b>application.do?rcfLogAppl=SEARCH_JOBS</b>
BSP in Portal:
/sap/bc/bsp/sap/hrrcf_start_int<b>/application.do/start?...</b>
Obviously the iView contains a parameter start or you defined the BSP application name as application.do/start
Regards,
Volker

E-Recruiting - BSP application - How to clear buffer?

Hi,
Im debugging one of BSP application (I set an external break point at method of model class).
Very first time program flow stops at break point but after that it is not stopping there b/c records being fetched from buffer. May I know how to clear the buffer?
Regards,
...Naddy

Well,
E-Recruiting Infotypes are buffered within the application as internal tables.
The buffer is filled, when first time opening an subapplication. It's also filled, when those infotype records have not been read before.
Refreshing the buffer is only triggered by the application. This is done by "Refresh"-Buttons or Buttons like "Start selection".
You cannot refresh it yourself, while debugging. It's a global event called by button events.

How to get application name from a receive location?

Hi all,
I am trying to do a custom error application, and I want to notify system admin users that "the receive port XXXX has stopped in application YYYYYY".
Right now I do know which receive location that is being suspended. But I am not being able to get the application name, associated to this receive location (I can also get the ReceivePort, if it matters).
I've tried 2 ways:
> using WMI
> Using SQL (direct query in BizTalk databases - for testing).
I did not found any solution, even search table by table, i did not found a relation between Applications and receive location..
Anyone?
Thanks in advance
Ricardo Bessa

The following SQL query should give you a result of every disabled receive location as well as it's receive port and application:
SELECT
RL.Name AS ReceiveLocationName
, RP.nvcName AS ReceivePortName
, APP.nvcName As Application
FROM [BizTalkMgmtDb].[dbo].[adm_ReceiveLocation] AS RL WITH(NOLOCK)
INNER JOIN [BizTalkMgmtDb].[dbo].[bts_receiveport] AS RP WITH(NOLOCK)
ON RL.ReceivePortId = RP.nID
INNER JOIN [BizTalkMgmtDb].[dbo].[bts_application] AS APP WITH(NOLOCK)
ON RP.nApplicationID = APP.nID
WHERE
RL.[Disabled] = -1
ORDER BY Application ASC
Christian @ IntegrationAdmin.com

E Recruitment BSP Application

Hi
A Smartform is opened in a BSP Page in Erecruitment module. In Smartform there is Structure defined in Form Interface'Posting type RCF_S_CS_DI_POSTING' in the main Window of Smartform. The variable POSTING-OVERVIEW_APPL_URL contains the URL.
When I am running the BSP page in one particular Client it runs fine the smart form is displayed as BSP page, the Main Window displays the data in the Posting URL variable, but while running in diferent client there is no value in URL even though data is present in tha client.
I probably feel the answer lies in BSP application, but dont know how to correct and locate the same.
Kindly provide with suitable inputs.
Best Regards
Swetank

Hello Luciano,
the method you are looking for is probably ON_CONTAINER_NAVIGATION in the interface IF_HRRCF_NV_CTRL_CALLS of the controller classes. Within these method checks and implicit data change could be done. If there are several controllers used for a container sequence item the main controller has to delegate to all active subcontrollers.
But please be aware. The implicit save of data entered within the screens of requisition and posting maintenance has not be implemented because of technical application restrictions. Many of our customers have required that sap adds this function to e-recruiting, as it also works for the application wizard. SAP simply could ot change this. This has to do with the status management of objects. It works for the application wizard as candidacy and application are always in draft when it is processed. The requisition can have different status when the requisition maintenance is processed and changes automatically set the status back to planned. This again leads to problems with functions like republishing of posting instances.
If you really want such kind of functionality you should check if going for EhP4 might be the better option for you. The requisition creation for recruiters can sav automatically in the new WebDynporo UI.
Best Regards
Roman

How do I stop my iWeb site folder name from showing in the URL?

I have looked through the forum but cannot find exactly what I need.
I am sure there is a way to stop this from happening but I do not want my iWeb site name to show in the URL. Anyone else had this problem that can spread some light on the situation?
Here is how it is showing:
www.ilovehopetown.com/ILove_Hope_Town/The_Ultimate_Guide_To_HopeTown.html
I want to to just be www.ilovehopetown.com and then the page name.
Any help will be appreciated.
Rob

What happens if I leave Site name blank?
Try it and see.
If you are using iWeb 09, the right forum to ask things in is here:
http://discussions.apple.com/forum.jspa?forumID=1309
Two options you could try are naming your site the same as the default folder used by your sever (e.g. public_http or whatever) or forwarding www.myname.com to www.myname.com/sitename

How to get the transaction name from the Webdynpro portal in SRM 7.0

Hello Experts,
Would you please let me know the procedure to get the current transaction name from the SRM 7.0 portal.
Is there any similar procedure like in ITS to get the transaction Name/Template Name in "View Source" of the portal. Our primary requirement is to find the root cause(by debugging) from SAP GUI.
Your pointers on this will be very much useful & worth the points.
Thanks & Best Regards,
Vishnu Reddy Sangati

Hi!
Try this thread:
http://help.sap.com/saphelp_nw04s/helpdata/EN/80/b2dd3a6dac703be10000000a11405a/frameset.htm
brgs Ziggy

In webdynpro how we will find out application name if you know the URL

I know the URL in webdynpro, than how can i find out application, please it is urgent

Hi Jagan.
I would like to suggest a few references,
[SAP HELP - Standard Reference for URL parameters and Application parameters in Webdynpro|http://help.sap.com/saphelp_nw04s/helpdata/en/7b/fb57412df8091de10000000a155106/frameset.htm]
[SAP HELP - Standard Reference for URL of a WebDynpro Application|http://help.sap.com/saphelp_nw04s/helpdata/en/8c/780741375cf16fe10000000a1550b0/frameset.htm]
[SAP HELP - Standard Reference for Using paramters for Calling a Web Dynpro Application|http://help.sap.com/saphelp_nw04s/helpdata/en/2f/e7574174c58547e10000000a1550b0/frameset.htm]
[SDN - Reference for Call another WD Application (Web Dynpro for ABAP)|Call another WD Application (Web Dynpro for ABAP);
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Calling web query from BSP application: Session handling

I would like to call a BI 7.0 web query from a BSP application.
Therefore, I generate a link like http://<server>:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=CR_M_0001_SALESFORECAST_0&VARIABLE_SCREEN=X
Now, I have the problem that I have to log in again.
The BSP application is embedded in the portal. SingleSignOn works for the BSP application, but not for the following link to the query.
Anybody know how to execute the query w/o login again?

i guess this is more related to ITS.
which ITS are you using?
integrated or standalone.
i checked in both (using standard webgui service) i dont see any problem using /n or /<transaction>
Regards
Raja

BSP Application does not launch in SAP R/3 4.7

Hi Experts,
We are trying to create a BSP application in SAP R/3 4.7. We are using the MVC architecture for the same. However, we are failing to launch the BSP pages. When the URL is launced either from SAP or directly in IE, the password prompt appears, after entering the user name and password it reappears again for 3 times and then throws a message invalid user name or password. This happens for all User Names. The passwords are correct though.
We have similar BSP Application in our SAP CRM 4.0 box and it works. I do not have much expertise in BSP, thus would want to know whether there are any BASIS settings that could be required in the system before we proceed. How do we know whether the system is compatible to BSP applications. We have even activated the BSP Application in SICF (Default_host -> SAP -> BC -> BSP -> SAP -> <BSP Application Name>). The current Support Pack version on the system are as follows,
SAP_BASIS Release 620 SAPKB62065; SAP_ABA Release 620 SAPKA62065.
Even if we try to launch the standard example BSP applications in the box, even they do not launch. The same problem appears. Do we need to make changes to User Roles level? All these user IDs have SAP ALL access though.
Please let me know how can I sort this out. Also let me know if you would need any further details.
Thanks for your help in advance.
Regards,
Subhrangsu

Hi Subbie,
in transaction SICF navigate to the service default_host->sap->public->ping. Right-click and select "Test Service". If this works then the BSP runtime is working okay.
Then navigate to the service sap->bc->bsp->sap->sbspext_htmlb and try the same there. On this service you will need to enter a username and password.
If all this works then you need to look clser at what you are doing.
Cheers
Graham Robbo

BADI for changing Appraisal document application name for Web dynpro ABAP

Hi,
For Appraisal document customizing through PHAP_CATALOG_PA, We have BADI HRHAP00_BSP_TMPL to change the BSP application name which can be used in Web layout for output display. Using this we can change application name from HAP_DOCUMENT to custom BSP application name
Similarly, what is the BADI for changing Web dynpro ABAP applictaion name? Currently its triggering HAP_MAIN_DOCUMENT.
how do we change application name to some custom web dynpro application name
Regards,
Kothand

Hi Karim,
I don't know, if there is any chance to get the Webdynpro application name. At least in the ABAP System fields is no information about the webdynpro application name.
One remark: I have allways problems with BAPIS / BADIS that behave different depending on the caller. Could it be a good idea to pass some information through the interface / parameters?
Best regards
Renald

After deleting enhanced view still the bsp application is showing in se80

Hi,
I enhanced one component then after some reason i deleted the enhanced view at that time it's asked do you want to delete bsp application i click on yes then after also still i showing in se 80 under my package it's showing.
after deleting enhancement view and deleted enhancement component.
after deleting these total still all the z classes are showing in sm24. if i enhance from starting on wards from enhancing component and enhancing view i need to new bsp application name because previous bsp application is still showing and some of the context class. after transporting in to quality server this component is showing there is context class which i redefine in the development and view is not defined in the run time repository. why it's showing these errors in quality server.
my guess is in dev i deleted which are deleted still the classes and bsp application are there older one if provide new bsp classes also.
what are important things we need to follow if delete the view enhancement and deleting the component enhancement. because if i transport after deleting with new bsp application name and with a previous existing class with a new request also it's not working quality server. because lot of classes are generating automatically in when we redefine the context class in development so these classes are not there in quality server.
please guide me if delete any enhanced view and component why still bsp application and redefine z classes are showing in se80 and se24. because if enhance newly also and redefine also it's considering previous bsp application and previous redefine classes.
what are precautions i need to take if i delete enhanced view and enhance component.please guide me.
jemmi.

Jemmi,
You should follow the following SAP Note in deleting enhancements. There are a few steps to be done in SM34. If we just delete through the wizard we are bound to have these issues.
SAP Note 1122248 - Consultation:Procedure when dealing w/framework enhancements
Briefly, these are the steps to delete the enhancemnet-
1) In SM34, view BSPWDVC_CMP_EXT. Select enhancement set and then select enhancement definition. You will see your component there.
2) Select your component and in left side navigation click Controller Substitutes.
3) A list of the enhanced views are displayed.
4) Select the views and delete it. Before you delete make a note of the BSP application these views are attached to. Hopefully, you attached them in a Z BSP application
5) Go to SE80. Select the Z BSP application and delete it.
Go through the SAP Note to understand the process in more detail.

E-Recruiting - BSP Application name from E-Rec portal URL

Similar Messages

Maybe you are looking for