How to get alerts out of SCOM and into a 3rd party management tool

Hi
I am creating an integration between a 3rd party management tool and System Center Operations Manager 2012 R2. I need to export alerts such as Power Off / Power On / Configuration change for both virtual machines and hyperv servers from SCOM
into our application. Our application runs on linux so I cannot do any .NET programming, however I can run Powershell scripts remotely using WinRM.
What is the best way to do this? I am aware of using the powershell cmdlet Get-SCOMAlert but is there any other way that does not involve polling?
thanks in advance

Think of Orchestrator as a "router", that will route information and workflows between SCOM, and [insert 3rd party product here]. Depending on your 3rd party product, there may be an "integration pack" for it that Orchestrator can use for out of the
box tasks.
So what's an integration pack? Well - think of it like a management pack, but for Orchestrator. SCOM does monitoring, but it doesn't know how to monitor something unless you install the relevant management pack. The management pack contains
all the rules/monitors for monitoring whatever it is you wish to monitor.
Well, an integration pack is similar in concept, except it tells Orchestrator how to interface and integrate with whatever it is you're trying to perform tasks with.
For what you want to do, there is a SCOM integration pack. This is a set of tasks that can get alerts and events out of Operations Manager (there are also tasks that can create and close alerts in Operations Manager).
From what I can imagine - you would want to get alerts out of SCOM when they happen (so you would use one of the SCOM orchestrator tasks to "get alert if status = new, and source = myapplication"), and then you can pass that alert to another task - such
as write it to a CSV file or something. You could then have another task that picks up that CSV file, and passes it to your application where it can be captured. Or you could use the CSV to populate variables in a powershell script, and then powershell
that information into your app.
There are many ways you could do this, but I do believe that Orchestrator would be the better option.
http://www.dreamension.net

Similar Messages

How to get performance data out of SCOM and into a 3rd party management tool

Hi
I am creating an integration between a 3rd party management tool and System Center Operations Manager 2012 R2. I need to export performance data from SCOM into our application for both HyperV servers and virtual machines. Our application runs on
linux so I cannot do any .NET programming.
What is the best way to do this? I am aware of using the Usage SPF web service but this will not share performance data for the hyperv servers, just the virtual machines .
thanks in advance

Hi,
We can use SQL query to get SCOM data out, but about how to send those data into your application, this should be related with how you develop your application.
Here is an article about Operations Manager integation, hope it helps:
http://social.technet.microsoft.com/wiki/contents/articles/12804.system-center-2012-integration-guide-operations-manager.aspx
Regards,
Yan Li
Regards, Yan Li

How to get imovies out of iPad and burn them using iDVD or Movie Maker?

Has anyone figured out how to get the iMovies created on the iPad out and onto a computer to burn them onto iDVD or MovieMaker?

Just export the movie to your camera roll and sync it back to your computer.

How to get ALL photos off iPhone and into iMac?

I hope I can describe this clearly.
I have close to 1000 photos on my iPhone 5s, all in different albums. I want to get ALL of them off the iPhone and backed up into my iMac so I don't lose them when I upgrade (which has happened before.) The albums I seem to have the biggest problem with are the ones that came over when I went from a PC to a Mac about 2 years ago and were in albums in my Kodak Easy Share. I can't get iPhoto to recognize these photos/albums so I can move them from the iPhone. Honestly, I'm not even sure how I got them from where they originated into my iPhone. I'd thought I'd lost them so when they popped up on my iPhone I refused to even update my phone for a while, I was so afraid to lose them.
I tried using Image Capture and it only recognized 176 photos on the iPhone.
I went into settings on my iPhone, into camera and photos, and saw that iCloud Photo Library (Beta) was "OFF." I clicked "ON" and got the message "Photos synced from iTunes will be removed. Syncing photos via iTunes is not supported when include Photo Library is turned on. 833 photos will be removed."
I hit cancel.
If I connect my iPhone to my Mac, and check off "Sync Photos" it appears that it's going to put photo's in iPhoto on my computer on my phone, so that isn't what I want either. I've tried Googling this, and searching on the Apple site and I can't find anything like this. Similar but not quite the same.
I also read (I think) that the iCloud would delete my photos in 30 days so I'm not sure what the value of backing them up to the iCloud is.
I've used Finder to search Kodak, Easy Share, Kodak Easy Share, in case these photos are somewhere else on the iMac that I'm not aware of, most likely due to user ignorance.
My screen is cracked, I'm going to need to upgrade soon, and I don't want to lose valuable photos again.
Thank you!

Thank you to all for this info. Discouraging, but finally I can stop banging my head on the desk trying to figure out what I'm doing wrong.
I do believe that when I synced my iPhone at some point in the last 2 years, I pulled all the photos OUT of iPhoto and then it deleted them. Which is most likely why the older Kodak photos that I am almost 100% certain were in iPhoto are now gone. How/when they ended up on my iPhone I don't know because I swear they suddenly appeared there a few weeks ago.
Since the old PC is gone (accessible but wiped clean & restored to original factory settings) and Easy Share is no more, I will have to explore outside options to get those photos off the iPhone somewhere. Online photo storage sites have been suggested. Archaic as it is, I wish I'd just put them all on cd's.
Using the info provided, I did SUCCESSFULLY get all 237 photos off of my iPhone 3. (yes, I still have it.) Now I know better and will never ever sync my photo's in iTunes again.
Thank you all again!!
***Addendum: ALL answers helped, but apparently I can't indicate that.

Problems getting data out of Mocha and into After Effects

Hi. I'm using After Effect CS4. I brought a video clip into Mocha and tracked it. I've tried copying the data to clipboard and also went back and saved as a text file since I could't paste into After Effects.
Haven't figured out how to make either method work.
At first, I'd created a Null Object in AFX and added the COrner Pin Effect, but the paste option is greyed out - doesn't matter if I select the layer or the Corner Pin effect.
Next I created a solid since I'd seen that mentioned on some threads, but Paste is still greyed out.
Tried exporting the tracking data as a file from mocha next and have the corner pin data sitting on my desktop as a txt file - but still not sure how to get that into After Effects CS4 - tried this with a null and a solid, but not working.
Thanks for any suggestions.

Also - It pastes unmoving data as well into the Postion, Scale, and Rotation of the solid as well as the Corner Pin Effect.
Yes, AE's corner pin does the same. It's how it is supposed to work. You need to choose the RG Warp compliant variant to only get corner pin data. The rest is too vague. Wee need exact info on what you are doing. Tracks appearing to be static is simply an issue where coordinates are introduced twice and somehow self-compensate, which for all intents and purposes could relate to the previously described issue....
Mylenium

How can I Downgrade to Snow Leopard and keeping all 3rd party apps?

New to MacBookPro and really happy. With Lion...not so much. I want to downgrade to SL, however, apparently I must reformat the hard drive. Here´s the real question: If I have a backup of my entire HD with the user, docs and all the apps I have installed (on Lion), once I downgrade to Snow Leopard, can I just move all my apps from the back up disk I have made of my Lion-Running hard drive? In other words, How can I downgrade without having to reinstall every single third party app I have?

First, how new is this Mac? A Mac as a rule cannot boot to an older operating system version than that with which it was originally supplied. In other words, if this is a new MBP that came with Lion then you probably cannot get it to boot to SL.
Some applications (and I take it you do mean full "applications" rather than "apps" which are mobile device programs -- it helps to be clear o terminology) can just be dragged from place to place. Others, notably Adobe and Office, install things all over the place and unless you are good at finding hidden files with obscure names in 10 different places you will just have to re-install them.

How to get values out of spreadsheet and insert them to formula?

So, how do i open a spreadsheet which contains two columns and several rows of data and insert those values in to a formula? To be accurate A1 shell should be input 1 (X1), shell A2 input 2 (X2), shell B1 input 3 (X3) and shell B2 input 4 (X4). After calculation it should continue to the next row and take values out of A2,A3,B2 and B3 and so on, to the end of data. I´m using Labview 7.

Sorry, I missed the overlapping portion of the pattern.
This one goes as follows:
First round: A1=x1, b1=x2, a2=x3, B2=x4
Second Round: a2=x1, B2=x2, a3=x3, b3=x4
Oh, and I'm using Excell conventions, so A=column1, 1=Row1, B=column2, 2=Row2
Cheers,
J5
2006 Ultimate LabVIEW G-eek.
Attachments:
Formula.vi ‏33 KB

If you have 2 apple ids, how do you sign out of one and into the other so you can update the app that was purchased in the other account. thanks

If you purchased an app in one account and work mostly in another, how do you switch the purchased app account to update it?
thanks

You need to sign out and back in only if you're on your Mac and you want to update the iTunes data. You'll see a notice saying that there are five (or so) updates but when you go to download them, they're not all present. So you download them, sign out from one ID and sign back in with the other ID. Then you can download the remaining ones.
If you're downloading directly to the iPad, everything is transparent. It does not matter what ID is configured in Settings. The iPad automatically chooses the correct ID or IDs when updates are available.

Need help getting information out of array and into text/object files

Im having alot of trouble with this i have the classes for the array, text reader and writer, and object reader and writer mostly done. I originally had a getInfo method in my object and text classes to input the data needed, but that wasnt how the instructor wanted. So my question is how do i take the infomation in the array in class studentarray and send that information to the text and object classes? I have looked online for an example and cant seem to find one that looks like it would work. I am pretty sure what i need will be put in the class StudentArray
here is requirements i havent figured out how to implement
- read student records from a �text� file
- write student records into a �text� file (new data after sorting)
- read student records from an �object� file
- write student records into an �object� file (new data after sorting)
I have sorting methods below in StudentArray just didnt post them
public class StudentArray {
private static Scanner input = new Scanner(System.in);
private static student sArray[] = new student[5];
public static void insert() throws NegativeIDException
for(int i = 0; i < 5; i++)
System.out.println("Please enter firstname:");
String Fname = input.next();
System.out.println("Please enter lastname:");
String Lname = input.next();
System.out.println("Please enter id:");
int Id = 0;
try
Id = input.nextInt();
NegativeIDException nide = new NegativeIDException("No negative number for id.");
if(Id < 0)
throw nide;
scanner.nextLine();
System.out.println("you must enter a positive number try again");
catch(InputMismatchException ime)
System.err.printf("\nException: %s\n", ime);
scanner.nextLine();
System.out.println("you must enter an integer try again");
System.out.println("Please enter year admitted:");
int Admitted = 0;
try
Admitted = input.nextInt();
NegativeIDException nide = new NegativeIDException("No negative number for id.");
if(Admitted < 0)
throw nide;
scanner.nextLine();
System.out.println("you must enter an integer try again");
catch(InputMismatchException ime)
System.err.printf("\nException: %s\n", ime);
scanner.nextLine();
System.out.println("you must enter an integer try again");
System.out.println("Please enter Gpa:");
double Gpa = input.nextDouble();
int t = 0;
          int q = 0;
          System.out.println("Please select your track");
               System.out.println("1 for doctoral student");
               System.out.println("2 for graduate student");
               System.out.println("3 for major student");
               System.out.println("4 for minor student");
               t = input.nextInt();
               if (t == 1)
                         System.out.println( "Please select your doctoral topic");
                         System.out.println("1 for Video Games");
                         System.out.println("2 for CPU History");
                         System.out.println("3 for Other");
                         int c = input.nextInt();
                         String diss = "";
                         if (c == 1)
                              diss = "Video Games";
                         else if (c == 2)
                              diss = "CPU History";
                         else if (c == 3)
                              diss = "Other";
                         sArray[i] = new CSDoctStudent(Fname, Lname, Id, Admitted, Gpa, diss);
                         q++;
                    else if (t == 2)
                    System.out.println( "Please enter the number for your graduate course");
                    System.out.println("1 for Software Engineering");
                    System.out.println("2 for Theory");
                    System.out.println("3 for Other");
                    int b = input.nextInt();
                    String Theory = "";
                    if (b == 1)
                         Theory = "Software Engineering";
                    else if (b == 2)
                         Theory = "Theory";
                    else if (b == 3)
                         Theory = "Other";
                    sArray[i] = new CsGradStudent(Fname, Lname, Id, Admitted, Gpa, Theory);
               q++;
                    else if (t == 3)
                         System.out.println( "Please enter the number for your major course");
                         System.out.println("1 for Hardware");
                         System.out.println("2 for IS");
                         System.out.println("3 for Theory");
                         int m = input.nextInt();
                         String track = "";
                         if (m == 1)
                         track = "Hardware";
                    else if (m == 2)
                         track = "IS";
                    else if (m == 3)
                         track = "Theory";
                         sArray[i] = new CSMajorStudent(Fname, Lname, Id, Admitted, Gpa, track);
                         q++;
               else if ( t == 4)
                         System.out.println( "Please enter the number for your minor course");
                         System.out.println("1 for Computer Application");
                         System.out.println("2 for Multimedia");
                         System.out.println("3 for Web Technology");
                         int d = input.nextInt();
                         String Hardware = "";
                         if (d == 1)
                              Hardware = "Computer Application";
                         else if (d == 2)
                              Hardware = "Multimedia";
                         else if (d == 3)
                              Hardware = "Web Technology";
                         sArray[i] = new CSMinorStudent(Fname, Lname, Id, Admitted, Gpa, Hardware);
                         q++;
               else;
sArray= new student(Fname,Lname,Id,Admitted, Gpa);
//trying to write it to a text file with this
import java.io.PrintWriter;
import java.util.Scanner;
import java.io.File;
import java.io.FileNotFoundException;
public class TStream {
private Scanner input = null;
private PrintWriter output = null;
private student [] sArray = new student[5];
public TStream()
public void write()
try
output = new PrintWriter("tdatabase.txt");
for(int i = 0; i < 5; i++)
output.print(sArray[i].getFname() + "\t");
output.print(sArray[i].getLname() + "\t");
output.print(sArray[i].getId() + "\t");
output.print(sArray[i].getAdmitted() + "\t");
output.print(sArray[i].getGpa() + "\t");
output.println();
output.close();
catch(FileNotFoundException fnfe)
System.err.printf("\nException: %s\n", fnfe);
System.out.println("Can not open this file.\n");
public void read()
try
input = new Scanner(new File("tdatabase.txt"));
for(int i = 0; i < 5; i++)
String Fname = input.next();
String Lname = input.next();
int Id = input.nextInt();
int Admitted = input.nextInt();
double Gpa = input.nextDouble();
sArray[i] = new student(Fname,Lname,Id,Admitted,Gpa);
input.close();
catch(FileNotFoundException fnfe)
System.err.printf("\nException: %s\n", fnfe);
System.out.println("Can not open this file.\n");

Use the [url http://forum.java.sun.com/help.jspa?sec=formatting]Code Formatting Tags so the code retains its original formatting.

Huge Problem: How to get Information out of the SAP System into MySQL?

Hi all
Im totally despaired... So im comming here, hoping to find ANY solution.
I wrote a Program, which creates a internal Table wich some information from many DDIC-Tables. The internal Table is about 7 Columns, with only char fields.
Also I have a MySQL Server (reached through the Internet), with a database on it, and a table, which looks 1:1 as my internal Table in ABAP does.
Now I want to append the Data from the internal Table to the MySQL Table.
Is there ANY chance of getting this done?
and btw. can I append this Data with a secured connection?
THX for help...
greets
Markus Voelker

Think of Orchestrator as a "router", that will route information and workflows between SCOM, and [insert 3rd party product here]. Depending on your 3rd party product, there may be an "integration pack" for it that Orchestrator can use for out of the
box tasks.
So what's an integration pack? Well - think of it like a management pack, but for Orchestrator. SCOM does monitoring, but it doesn't know how to monitor something unless you install the relevant management pack. The management pack contains
all the rules/monitors for monitoring whatever it is you wish to monitor.
Well, an integration pack is similar in concept, except it tells Orchestrator how to interface and integrate with whatever it is you're trying to perform tasks with.
For what you want to do, there is a SCOM integration pack. This is a set of tasks that can get alerts and events out of Operations Manager (there are also tasks that can create and close alerts in Operations Manager).
From what I can imagine - you would want to get alerts out of SCOM when they happen (so you would use one of the SCOM orchestrator tasks to "get alert if status = new, and source = myapplication"), and then you can pass that alert to another task - such
as write it to a CSV file or something. You could then have another task that picks up that CSV file, and passes it to your application where it can be captured. Or you could use the CSV to populate variables in a powershell script, and then powershell
that information into your app.
There are many ways you could do this, but I do believe that Orchestrator would be the better option.
http://www.dreamension.net

How to Get In & Out of Match, Get your Downloads and Run

How to Get In & Out of Match, Get your Downloads and Run
So you have read the marketing hype, and are thinking what you really want is to pay for the service to upgrade your low quality bitrate files to a bit better 256KBPS rate easily, as don’t fancy rebuying/ reimporting or other method
This guide should show you the fastest route to achieve you upgrades
It assumes you’re working from your main music library, and know something about IT, and have <25k of music files
Backup your music files
If you know how to do this, its simple right – so once done then move to step 2, if not read below so you don’t blame me for a loss
Transfer Hardware
your choice the transfer hardware, suggest offline harddrive via USB3.0 (blue USB connector/eSata/ 1494b/1GB NIC/etcetera but your call
If you use USB2.0/ 100MB NIC/1394a or other lower transfer method, accept the time hit
Don’t use Time Backup/local disk backup software unless you have RAID 5 setup or better (and if wondering what that is, you almost certainly don’t then)
Don’t use internet backup service unless you live next door to the hosting company, with stunning internet connection to envy 99.9% of the human race, remember this is the fast method folks)
Transfer Software
I am assuming you know how to do a copy n paste/ robocoby/xcopy/drag n drop or whatever method turns you on via finder/explorer/cmd window ect
Caveat #01: If not sure how to do above, then stop now as you are not IT literate ready for this
Find your music files and back them up
Now keep the computer running, preferably with nothing else running from this point for ease of use bar an active internet connection, and power saving switched off
If you know where the files are great, backup the files, but some don’t so for them as below
Caveat #02: if you don’t know how to find them your most likely on default settings, or sitting with a legacy from a past upgraded machine - below should help but you might want to stop now if you have never been curious about the location before
Within iTunes , go to [Edit/Preferences/Advanced] and note down the location shown for Itunes Media Location
In the same location of preferences, hit [Keep iTunes Media Folder organised] and let the application do its stuff. You will end up with the location in 1ciii a ready to copy location which for simplicity of topic, copy the whole folder and its subfolders. You may end up with some extra copies of music files (an iTunes safety mechanism, but it won’t show in the folder location, and we can ignore later on)
Enable Match (after paying for the service)
Run Match
Accept that the Apple iTunes process is not perfect, may crash/stop/pause and reboots will be needed, and we can move on so to speak. Key here is you cannot do an unattended script or assume no end user interaction needed L
Turn on iTunes Match, notice the new ITunes Match on the left hand sidebar, click it, then hit the Start button – if it works and you eventually get to STEP 3 perfect.
If it fails before getting to STEP 3, reboot and restart
If this still fails to get to STEP 3, then create a new iTunes database (browse forums on how to do), read your media files from the location in 1civ
Stop MATCH (the upload process only, not the service)
Once STEP 3 starts, CLICK STOP - ASAP, as all this does it upload data, and you don’t want to do this, just get your upgraded files (remember the title of this entry your reading!)
This also avoids future issues with Album art lost
Delete Matched low bitrate files
Create a NEW SMART playlist, with two criteria
Show all files with bitrate is less then 256
Show all files where iCloud status is MATCHED
In the new playlist, click it and it shows the files we want to blow away.
Click Edit / Select All then
Click ctrl in windows/apple (cmd) logo in mac, and press delete button, ensuring you do NOT tick the delete from iCloud Option. Now want a few mins for it do do its stuff.
Download Upgraded BitRate Files
In the same location as 5, reselect all, and right click, and select the option to download all, and off it goes
On the lefthand sidebar in iTunes, click Downloads, and you will then see in the middle bottom screen an option for simultaneous downloads (select it)
Your done Just let the app now do its stuff. I would ignore the message saying you can get on with other things, and use anther machine, preferably not using the same internet connection.
Optional Steps:
Click randomly from the Itunes/Matched/256KBPS listed files, and play them. Not all the files, one every 30 or so, and just the start, then last few seconds to check not dead or corrupt files.
Update your Step 1 backup with the new files, which is going to take up more space, guess at 40%.
Kill your iTunes Match account (both the recurring automatic subscription, and the account if not continuing to use the store part of iTunes)

bump

I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H.

Saved a few images to Dashboard. How can I get them out of there and save them to a file? Thanks

Saved a few images to Dashboard. How can I get them out of there and saved to a file? Thanks

I'm sorry, I'm lost & don't even know what to ask.
Oh wait, open Dashboard in Applications, do the Pics show there?
http://techland.time.com/2013/01/22/the-slow-but-almost-certain-demise-of-apples -os-x-dashboard/

How to get alert for app server that experienced high memory and CPU utiliz

Hi
How to get alerts configured and turned u201Conu201D for the app server that experienced high memory and CPU utilization?
And let me know where we can check this?
Regards,
Neni

hi,
Have you configured a Central Monitoring System (CEN)? This includes registering the agent on the CEN, starting it and configuring the Central Auto Reactions on CEN using RZ21 transaction.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000000a42189b/frameset.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000000a42189b/frameset.htm]
Jansi

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

How to get alerts out of SCOM and into a 3rd party management tool

Similar Messages

Maybe you are looking for