How to get and save the incoming filename in to db in biztalk.

Hi,
I need to save the incoming file name in to a table in biztalk.
Below are the steps which are needed
1) Need to get the incoming file in orchestration
2) Map the incoming file in to field from source to destination schema(db) - such that file name will get stored in to table with other fields directly.
Your help is greatly appreciated.....
Thanks,
Vijayan
vijayan

Per my understanding ,
-> you are trasforming incoming message to outbound message(for database).
-> One of the elements in oubound message is (let's say) FileName and is inserted into database.
-> And, you want to map incoming file name in outbound message field(FileName).
There could be any below resolutions:
Option1 : In orchestration, if inbound message is MsgIn and outbound message is MsgOut and destination schema element FileName is made as distinguished field then write below in construct message and message assignment shape.
MsgOut1=MsgOut;
MsgOut1(*)=MsgOut(*);
MsgOut1.FileName = MsgIn(BTS.ReceivedFileName).
//BizTalk engine promotes incoming message file name in property schema BTS.bts_system_properties.
Option2 : ->Create schema class of destination schema using xsd.exe tool(in BizTalk server installation folder).
->After this , a class file will be generated.
-> Create instance of this file and assign like below in expression shape.
obj.FileName=MsgIn(BTS.ReceivedFileName).
Then, in message assignment shape, assign instance to outbound message.
MsgOut=obj.
Thank you.
Nishant Garg
BizTalk Developer/Admin/Trainer

Similar Messages

How to get and install the new MSI Bluetooth Software Package 1.4.3.3.

How to get and install the new MSI Bluetooth Software Package 1.4.3.3.
This little FAQ will only cover the new version of MSI Bluetooth Software Package.
First thing too do is unistall any older version of the MSI Bluetooth Software.
Do this through the Add/Remove program applet in your control panel.
There seams too be only through Live update you could get the new version of MSI Bluetooth Software Package.
If you can't see any enter for MSI Bluetooth Software in the Live driver section of Live update then you have too enter the following too your registry.
Create following code in Notepad and save it as MSILD.reg, then run the file.
;-->Code start
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\MSI\Drivers\MSI Bluetooth Software]
"DrvSetup"="1"
"Version"="1.4.2.10"
;-->Code end
Rerun the Live update and hopefully you will now see a entry for MSI Bluetooth Software in Live driver section.
Install the new version of MSI Bluetooth Software and reboot your computer. Even if the setup program doesnt told you too doit.
After rebooting the computer you will see the Bluetooth icon in the taskbar. If it's Red then try too start the Bluetooth services by right click on the try icon and the only alternetiv there is.
If the Bluetooth services is asking for a valid licens.dat then you should do the following.
Surf to Jon's Bluetooth guide http://www.jonsguides.com./bluetooth/prepare.html and download the patcher from the link there.
Unzip the the patcher and then run the BTWPatcher.exe program.
Now the Bluetooth services will start and you will bee able too configure your own settings for the Bluetooth services.
If nothing of this work you could try the complete Bluetooth solution at Jon's gudie and install the IBM version of the same program. I havent test this solution and will not do soo.

I have the MS-6968 device and i want to use driver 1.4.x or 3.0.x. I found the driver 1.4.2.10 but i cannot find any WIDCOMMSecurity code.
So, can anyone give me a link for BTWPatcher.exe???
It cannot be found here (Jon's Bluetooth ) anymore.
Thanks

HT204089 I have a samsung smart TV and record free to air TV shows on my TVO I would like to purchase from iTunes a TV series called outlander but do not know how to transfer and save the episodes on my TIVO I will be using my iPad to purchase and downloa

I Have a samsung smart TV and use TVO to record free to air programmes .
i would like to purchase from iTunes using my iPad , a TV series called outlander but do not know how to transfer and save the episodes to my TIVO
please help

Many videos in the iTunes store are protected so that they can only be viewed on Apple Devices signed into your iTunes account. If that is the case then your TiVo will not be able to read the files. If you know how to get a video file onto your TiVo from a flash drive, then just plug a flash drive into your Mac and drag one of the videos from inside the iTunes window onto the icon for the flash drive on your Desktop or in the left sidebar of a Finder window. That will copy the actual file onto the flash drive.

Can I play and save the incoming RTP streams simultenously

Hi,
I want to whether i can play and save the incoming RTP stream simultenously using
JMF 2.1. The idea is by saving in the file, i can playback the same file later time
Is there any example code aviliable.
Thanks in Advance
bye
Srikanth

I think this, today, it's impossible lamentably. By but that I have tried it, I have not been able to obtain it.
If exists someone that it has obtained it, please, help us with this subject. It's very important.
Thanks

How to modify and save the data in the table control

how to modify and save the data in the table control

hi priya,
kindly go thru the code below.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_cancel AT EXIT-COMMAND.
LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
ENDLOOP.
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to *the table control
*zmpets_mode-modecode, zmpets_range-rangeid, *zmpets_servfacto-factor are field names of the table *control columns.
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE.                 " move_data_to_table OUTPUT
**********************************************8888
MODULE move_data_from_table INPUT.
*To move the data from the table control to internal *table 'INT_FACTOR'.
int_factor-chk = line.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
   MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0.
      APPEND int_factor.
      CLEAR int_factor.
    ENDIF.
ENDMODULE.                 " move_data_from_table INPUT
if this helps , kindly award points.
for any clarification just mail me.
regards,
Anversha.S
[email protected]

I can not boot my MacBook Pro. How do I get and save the data that is not backed up??

I can not boot my MacBook Pro running on Lion 10.7.4. I pressed control, comment P and R keys and O got to the disk utility, then I tried to repair disk and it can not be repaired. I get a message that tells me to back up as much data as possible ?. But if I can not open the computer how can I save my data??
I have a back up until 2 weeks ago on time machine. but the work of the last 2 weeks is extremely important how can I get it??
If I use m time machine backup do I loose the additional data of the last two weeks!,
Please help.. It's a huge amount of work that I have done and can not loose it

If it were me, I'd get a new hard drive or SSD and put it in an external enclosure. Boot into the recovery partition, format the new drive (not the old one) and install the OS to it. Shut down the Mac, open it up, and swap the drives. You may be able to read your data from the old one externally if you're lucky. If you're very lucky you may be able to use Migration Assistant to move all your stuff to the new drive.
Look at ifixit.com for the exact procedure to get to the drive on your model. If it's a unibody it's pretty simple.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1392154588&sr=8-3&keywords=2.5+enclosure

How can i get and save the name of the file

Hi all
in my program i'm dealing with several text files each has its own name
after doing some process on each i do save the output as output.txt
can i add the file name before or after the output.txt
i.e i want the name of the file to be part of the saved output
filenameOutput.txt
or
outputFilename.txt
any ideas?????

Just write it - somewhere in your code you have to have the file name anyway, or you couldn't write to that file.

How to get and set the column order in SharePoint list forms

Hi,
I want to read the column order of the SharePoint list forms in SharePoint 2003 sites using any of the available web services and need to set the same order
in the newly created list in SharePoint 2010.
I am able to read the fields from SharePoint 2003 and creating the list with same fields in SharePoint 2010, but the column order is not maintaining in
list forms.
Also, I need to created the views from 2003 site to 2010 site.
Please help me...
Thanks in advance...

Hi,
Please try to use the following code to programatically change the order.
SPList list = web.Lists["Example List"];
if (list.ContentTypes.Count > 0)
SPContentType ct = list.ContentTypes[0];
string[] names = {"Example_x0020_One", "Example_x0020_Two", "Example_x0020_Three"};
ct.FieldLinks.Reorder(names);
ct.Update();
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/ce66fd65-2882-4bda-8142-89e116d8b90f/how-to-set-the-order-of-the-fields-in-list-forms?forum=sharepointdevelopmentprevious
Best Regards
Dennis Guo
TechNet Community Support

How to read and save the following XML-Doc?

Hi all,
I have a XML-Document:
<root>
<employees>
<emp1>
<ename>Test1</ename>
<empno>1</empno>
<sal/>
<ord>
<item>1</item>
</ord>
</emp1>
<emp2>
<ename>Test2</ename>
<empno>2</empno>
<sal>1000</sal>
<comm>200</comm>
<ord>
<item>3</item>
</ord>
</emp2>
</employees>
</root>
This should I save in the databse table:
CREATE TABLE XML_DOC
ID NUMBER(38),
FATHERTAG NUMBER(38),
TAGNAME VARCHAR2(250),
TAGCONT VARCHAR2(4000)
And tha data should be saved in the following format:
=======================================
| ID | FATHERTAG | TAGNAME | TAGCONT|
| 1 | | root | |
| 2 | 1 | EMPLOYEES | |
| 3 | 2 | EMP1 | |
| 4 | 3 | ENAME | Test1 |
| 5 | 3 | EMPNO | 1 |
| 6 | 3 | SAL | |
| 7 | 3 | ORD | |
| 8 | 7 | ITEM | 1 |
| 9 | 2 | EMP2 | |
Has anyone any Idea how to realize it?
Regards

Leonid,
Why don't you just store the xml document in the database as an xmltype? You could then build a view over the object-relational table to pull the data out into the format you want.
The following code Example is from one of my favorite DBA's Johnathan Gennick and can be found at this link.
http://www.oracle.com/technology/oramag/oracle/03-jan/o13xml.html
CREATE VIEW cd_master (Title, Artist, Website, Description) AS
SELECT extractValue(value(x),'/CD/Title'),
extractValue(value(x),'/CD/Artist'),
extractValue(value(x),'/CD/Website'),
extractValue(value(x),'/CD/Description')
FROM CD331_TAB x;

COULD SOMEONE PLEASE TELL ME HOW TO GET AND KEEP THE MAIL ICON ON MY SHELF? I LOSE MY ICON AFTER START UP AND HAVE TO GO GET IT THROUGH FINDER! WHY IS THIS NOT STAYING ON MY SHELF? TY

RECENTLY MY MAIL AND SAFARI ICON HAVE BEEN DISAPPEARING FROM THE SHELF, I HAVE TO GO THROUGH FINDER TO RETRIEVE THEM. WHEN I DRAG THEM TO THE SHELF THEY STAY AND ALL OF A SUDDEN DISAPPEAR, CAN ANYONE TELL ME WHY THIS IS HAPPENING AND WHAT IM DOING WRONG? ANY HELP WOULD BE GREATLY APPRECIATED! THANKS!!

When the applications are next launched click and hold on the icon in the dock and select 'options>keep in dock'.
P.S. No need for caps - it's considered to be shouting - not necessary round here

How to get the incoming filename and store it to sql table using biztalk server 2013

HI,
1)I need to get the incoming EDI filename which is received and save the filename in to the database.
2)How can i get the EDI Duplicate filename if i set the do not allow duplicate under validation tab in X12 agreement settings in biztalk admin console. In this case since the duplicate file will not come in to orchestration. In this case how
can i acheive this.
Thanks,
Vijayan
vijayan

For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port.

Getting Output filename and extension same as the incoming filename and extension

I need to create a SFTP send port where I should get the output file name and extension same as that of the incoming filename
I had set the filename in the send port as "%SourceFileName%" but this did not work.
I have also assigned the input filename (without extension) in a variable in orchestartion. Is there any way i could get the output filename and extension same as that of the incoming message?
Any help would be much appreciated

Hi,
The %SourceFileName% macro maps to the context property BTS.ReceiveFileName that travels with your message in the context. So in order for this macro to work in a send port the message that is going out needs to have this BTS.ReceiveFileName property on
the context. You probably creating a new message in your orchestration and sending that out. The new message does not have the property on its context which makes it fail. Use a message assignment shape in your orchestration to set the context property for
the message going out:
MyMessage(BTS.ReceiveFileName) = OrigMessage(BTS.ReceiveFileName);
Then %SourceFileName% macro will work at send port.
Rachit
Please mark as answer or vote as helpful if my reply does

All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so it goes to Default. thanks

All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so all photos goes to Default or as shot. thanks

Go to the develop module and highlight all of the images in the filmstrip at the bottom of the screen. Then activate Auto-sync and click on the Reset button. That should reset all of the images to your camera default settings.

I had to manually download the new version of itunes.. via tools, it gave me 4 items to download and i did not download all 4 compenants. Does anyone know how to get back to the pop up that contains tools so i can redownlaod all of them.

I lost my old iphone and have a new 5s.. i need to sync to itunes. i had to donwload manually via tools but i didnt download all four files. now when i plug my phone into itunes it says there is an error bc i didnt download all the files. so when i go into itunes now and check for updates it says its up to date. the problem is with the phone support file i didnt download.
Does anyone know how to get back to the pop up that has the music player update and itunes update bc this is the only place i have seen "tools" to be able to manually update all four files....
***IF i completely uninstall itunes and reinstall will it still have all my songs, photos, apps etc... bc i need to sync my new phone to get all my stuff back

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?

I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?

Hi Atrec,
If you don't need your old custom template, save your changes with the same template name. It will tell you that this template exists and will ask you Replace? Say yes (if you do want to replace the old with the new!)
To delete unwanted templates, go to Finder > Menu > Go and press the option key. Your Library will show in the Go Menu. Navigate to Library > Application Support > iWork > Numbers > Templates > My Templates.
Delete any unwanted template by dragging it to the Trash or click on it then command-delete.
Having gone to all that trouble to find My Templates folder, right click (or control click) on it and Make Alias. Drag the Alias to any convenient place for a quick way to get back to that folder.
Regards,
Ian.

How to get and save the incoming filename in to db in biztalk.

Similar Messages

Maybe you are looking for