How to get App specific spaces

Back in Snowleopard i had it when i opend iTunes it would open up in a specific space desktop (ie. Space 3 of 6), I noticed that that opption isnt in Lion.... or is it just hiding? could any one tell me?

You have to set it up again in Lion. While iTunes is running, select the Desktop you want to use with it. Then, right/command click iTunes in the dock. Choose Options > Assign to > This Desktop.

Similar Messages

DATA TRANSFER - How to get a SINGLE SPACE in downloaded txt file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Its there, I am talking abut this -
OPEN DATASET - linefeed
Syntax
... WITH { NATIVE
         | SMART
         | UNIX
         | WINDOWS } LINEFEED ... .
Alternatives:
1. ... WITH NATIVE LINEFEED
2. ... WITH SMART LINEFEED
3. ... WITH UNIX LINEFEED
4. ... WITH WINDOWS LINEFEED
Effect
: These additions determine which line end marker is used for text files or legacy text files. If these additions are used, the profile parameter abap/NTfmode is ignored. Simultaneous specification of the values "UNIX" or "NT" in the addition TYPE is not permitted.
If these additions are not used, the line end marker is determined as follows, depending on the operating system of the current application server:
The line end marker for Unix is "LF". Under Unix, OS390 and OS400, only "LF" is used for reading and writing.
The line end marker for MS Windows is "CRLF". Under MS Windows, however, the values of the profile parameter abap/NTfmode can also be used to set whether new files are handled according to Unix conventions or Windows conventions. If the profile parameter has the value "b", the Unix line end marker "LF" is used. If the profile parameter has the value "t" or is initial, the Windows line end marker "CRLF" is used. The setting using the profile parameter can be overridden with the addition TYPE and the value "UNIX" or "NT". If an existing file is opened without the addition TYPE, this is searched for the first line end marker ("LF" or "CRLF"), and this is used for the whole file. If no line end marker is found, the profile parameter is used. This applies particularly if an existing file is completely overwritten with FOR OUTPUT.
If an addition WITH NATIVE|SMART|UNIX|WINDOWS LINEFEED is used, this setting can be changed for the open file using the statement SET DATASET. If neither of the additions is used, the line end marker also cannot be changed using SET DATASET.
Notes
: Without the use of an addition WITH LINEFEED, the line end marker is dependent on diverse implicit factors such as the operating system of the application server, a profile parameter, and line end markings that are already used. For this reason, the explicit use of WITH LINEFEED is recommended, which renders the use of the addition TYPE for setting the line end marker obsolete.
The line end marker that is currently used can be determined for every open file using GET DATASET.
Alternative 1
... WITH NATIVE LINEFEED
Effect
: This addition defines the line end marker independently of the access type according to the operating system of the application server, i.e. "LF" for Unix OS390 or OS400, and "CRLF" for MS Windows.
The line end marker is interpreted according to the current codepage. If a code page is explicitly specified using the addition CODE PAGE, the characters of the line end marker must exist be available or be written in accordance with this code page.
Note
: The addition WITH NATIVE LINEFEED is intended for editing files on an application server that can also be accessed by other means. The addition receives the appropriate line end marker without the program needing to know the operating system.
Alternative 2
... WITH SMART LINEFEED
Effect
: This addition depends on the access type:
In files that are opened for reading using FOR INPUT, both "LF" and "CRLF are interpreted as a line end marker. When opening an EBCDIC file with the addition CODEPAGE, in addition to "LF", "CRLF", and the EBCDIC character strings, the corresponding ASCII character strings are also recognized. In addition, the EBCDIC character "NL" (line separator) is also interpreted as a line end marker.
In files opened for appending or changing with FOR APPENDING or FOR UPDATE, the program searches for a line end marker that is already used in the file. In this process, first the end of the file is identified. If no line end marker is found there, a certain number of characters at the beginning is analyzed. If a line end marker is found, this is used when writing to the file. This is also affected by the addition CODE PAGE. For example, ASCII line end markers are recognized and used in a file opened with EBCDIC, but not the other way round. If no line end marker is found or no search is possible (for example, if the file is opened with the addition FILTER), the line end marker is determined according to the operating system of the application server, as with the addition WITH NATIVE LINEFEED.
In files opened for writing using FOR OUTPUT, the line end marker is determined according the operating system of the application server, as with the addition WITH NATIVE LINEFEED.
Note
: The addition WITH SMART LINEFEED is intended for the generic editing of files in heterogeneous environments. The line end marker is recognized and set for different formats. The use of this addition is the best solution for most application cases.
Alternative 3
... WITH UNIX LINEFEED
Effect
: The line end marker is set to "LF" regardless of the access type and operating system of the application server.
The line end marker is interpreted according to the current code page. If a code page is specified explicitly using the addition CODE PAGE, the characters of the line end marker must be available or be written according to this code page.
Note
: The addition WITH UNIX LINEFEED is intended for editing Unix files in which the specific line end markers are to be retained, even if the operating system of the current application server is MS Windows.
Alternative 4
... WITH WINDOWS LINEFEED
Effect
: The line end marker is set to "CRLF" regardless of the access type and operating system of the application server.
The line end marker is interpreted according to the current code page. If a code page is specified explicitly using the addition CODE PAGE, the characters of the line end marker must be available and be written according to this code page.
Note
: The addition WITH WINDOWS LINEFEED is intended for use with MS Windows files in which the specific line end marker is to be retained, even if the operating system of the current application server is Unix, OS390 or OS400.

DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Hi,
I don't know if this works:
perform SET_TRAIL_BLANKS(saplgrap) using 'X'.
perform SET_FIXLEN(saplgrap) using '0' '060'. "put length of your line from-to
... download ...
It will put space at the end of your line, according to the length.
Hope it works,
Chang

I recently got an Ipod touch model A1213 and I cannot figure out how to get apps on it. I have tried everything and when I try to update software, it says Im already up to date, but my software version is only 1.1.5. How do i fix it?

I recent recieved and Ipod touch model A1213 and i cannot figure out how to get apps on it. I have tried everything i can think of and when i try to update my ipod software it tells me that its already up to date. even though its only 1.1.5. How do i fix it?

You have a 1st generation iPod Touch.
It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Re: how to get apps for iphone 3g 4.2.1

Re: how to get apps for iphone 3g 4.2.1 all apps support higher version help....
Sep 24, 2013 6:34 AM (in response to Rajmit)
I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally.

I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally.

How to get the specific name of the workset which is currently selected by the user in sap portal 7.0

Dear Expert,
I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
I am using portal 7.0.
Thanks & Regards,
Patralekha

Hi Expert,
I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
INavigationService is available there.
But didn't get any proper discussion on this interface for the same requirement.
Can you please help me.
Thanks & Regards,
Patralekha

How to get apps from iTunes to play on my computer

how to get apps from iTunes to play on my computer

That is correct if there is a similar application made for the computer. It will not be sold through iTunes. Either you get it from the developer's website or look for it in the App Store or look for it at MacUpdate or CNET Downloads .

How to get apps to delet

How to get apps to delet

Hold down on the App you wish to delete until they start to shake, and then tap on the (x) in the corner to delete the App.
Tap the Home button when you are done.
If you see no X's for any Apps make sure Deleting Apps is not restricted under Settings->General->Restrictions
Also, you cannot delete default Apple apps.

How to get customer-specific objects into PCUI ?

Hello,
we want to get an Z-table as tab page of the business partner-application into PCUI. It should 'only' be possible to create new entries - today there is no need to modify or delete records.
Does there exist something like a "cookbook" on this task or has anyone of you experience how to get customer-specific objects (without using EEWB) into PCUI ?
Thanks in advance
Martin

Option 1:
If you are good in ABAP.
You can add new tab in which create a new Field group. Assign it to a model access clas in which handle the table update.You can get the details in PCUI cookbook itsel.
Option 2:
If you are good at java
Develop an FM to update the table.
Call the FM from webdynpro
Include this webdynpro as HTML viewer in PCUI.
Regards,
Abdul Raheem S

How to get app I bought on iPad also on iPhone

how to get app I bought on iPad also on iPhone

Provided it is an app that works both on iphone and ipad try Downloading past purchases from the App Store, iBookstore, and iTunes Store

Can I know how to get App Store applications get DRM removed for enterprise testing?

Can I know how to get App Store applications get DRM removed for enterprise testing?

http://www.apple.com/business/vpp/

How to get the specific filename

Hi..
I want to get the specific file where the filename contains current date like "asd.11.20051226.03.dat". Then, i want to write the filename to a text file.
Now, i only know how to get the list of file in a specific directory& write the whole list to a text file. How to filter the list of filename because they have "dot" in their name?

To determine if a string contains a dot:I have a feeling that about 10 seconds after he figures out whether the filename contains a dot he's going to need to look a little deeper to determine whether he found wakka.wrongfile.txt or 11.20.1980.the.file.hes.looking.for.data. Maybe?

How to get app in reader 8.0

I made a mfc project.I try to open a pdf file in my mfc project.
First I add the typelib of acrobat pro 7.0 to struct my pdf app and avdoc,etc. Like this :CCAcroApp *m_pAcroApp;
when use pro 7.0,this works well.
But i need to open pdf with Reader 8.0.
So i change pro 7.0 Typelib with reader 8.0 typelib form AcroRd32.dll.
But the project still use pro7.0 to open pdf.
so I remove pro 7.0 form system,and still use Reader 8.0 typelib.
In project i use follow code to test wether the app object is got:
m_pAcroApp = new CCAcroApp;
COleException e;
if (!m_pAcroApp->CreateDispatch("AcroExch.App",&e))
AfxMessageBox("Failed to create App object :<");
return;
I see the AfxMessageBox..........
I want to know that if i must install acrobat pro to get app,then how can i use Reader to open pdf?
If not , how can i get Reader app?

Please see the Developing Applications Using Interapplication
Communication document for the interfaces available in Reader. This
does not include the ones you have chosen. There is a browser
interface, and certain DDE methods, as documented.
Aandi Inston

How to get detailed specifications by machine type model ?

Hi,
I am looking for a refurbished Thinkpad Lenovo (model X220/X230, T420(s)/T430(s)).
I would like to know where I can find the detailed specifications by using the machine type model ?
For the moment, I was using the PSREF, but I discovered that not all machine type were detailed.
For example, the machine 2324-C44.
I found this : http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x23... but the specifications seems to be incomplete : baclit keyboard ? IPS premium screen ? finger print reader ? webcam ? WWAN ?
Thanks,
Moderator note: fixed broken link.
Lenovo X220 4287-CTO / Intel Core i7 2640M @ 2.8 / Corsair Vengeance 16 Go@1866 MHz CL10 / Samsung SSD 840 PRO 512 Go / Bios 1.38 / Linux Xubuntu 14.04LTS / eGPU ATI Radeon 5870 Eyefinity 6 / 2x DELL U2142M / 2x DELL U2212HM

Update stauts, I found some solution to get ActiveXData and analytic parameters.result.
PropertyObject ProObj = MyContext.AsPropertyObject();
PropertyObject ProObjResult = ProObj.GetPropertyObject("Parameters.Result",0);
The next question is how to get result by engine OnUIMessageEvent? Current is use timer loop.
Any ideas?

HT4623 how to get app from itunes

HOW TO GET GAMES FROM ITUNES,

Find app in the app store.
Buy app from the app store.
Are you having an issue with the process? What is that issue?
Please turn off your caps lock and explain your issue

How to get App specific spaces

Similar Messages

Maybe you are looking for