How to get best image quality when inserting PDF into Word?

I am able to insert a PDF as an object into Word, but the image quality is slightly blurry. Is there anything I can adjust to improve image clarity in Word?

You can try to extract the images using Extract All Images or select the Settings on the save screen that you get when you save to a DOC, but I think the general result is that the image saves with the same resolution as contained in the PDF. It may be that you need to just adjust your screen in WORD. You might want to look at the image in WORD and see if it is being used at 100% or some other resolution. Bitmaps are not very forgiving if the resolution is changed for the document and does not like anything other than low number fractions of resolution display change.

Similar Messages

I'm getting poor image quality when rendering PDF grahics

I have a PAL 1920x1080 50i ProRes 422 timeline, when I add PDF images from a Power Point I have to enlarge them about 100% to fill the frame adequately. When these clips are rendered they end up with the text loosing definition and showing jpeg like artifacts. They are 1006x760 pixels. Is there a solution? Should I go back and try to get hold of the original slides?

Thanks everyone for the help, in the end I bought a PP/PDF converter and made TIFFs from them. (Tinyware PDF Converter) Not great but better than before. It was the fact that the image appeared fine in the canvas until I rendered it, it was only then that the text looked bad. This extractor seems to work ok, the methods on various blogs only worked if you have Office for Mavericks, Page extracts PPs but not to image files.
Thanks again.

How to get best picture quality using iDVD to burn a movie from iMovie?

I would appreciate any guidance on options to choose and approaches such that I get the best picture quality when I view an iMovie product on a wide screen HD TV using a DVD burned with iDVD. Choose wide screen or standard format in iMovie? Best Performance or Prof. Quality in iDVD? ...

Good Morning,
My computer is using Snow Leopard 10.6.5 and has ilife 09 installed on an imac. I have been reading it is better to use imovie 06. When I tried to do a custom install from the 06 disk imovie and idvd were grayed out but had a checkmark. It would not let me deselect idvd. Not really knowing how to do this I quite the process. Can you or someone please advise me on how and what exactly to do in order to accomplish a custom install of imovie 06? Should I delete imovie 09 first? If so how is this accomplished. Perhaps it would be less complicated to purchase photo to movie? Really do not want to spend unless it is necessary since I only know a little about what I'm doing but enough to be dangerous to my computer
Thanks,
reverseimage

How to get LR4 to open when inserting an SD card (MAC 10.8.2)

I had LR3 opening when I inserted an SD card but when I installed LR4.4 it broke that and now I can't get LR4 to open when inserting a card. Still fairly new to MAC's so would appreciate any help.

First:
Go to Preferences>General Tab and check Show import dialog when a memory card is detected.
Second:
Open Image Capture on your Mac (search for it in Spotlight)
Insert your Card.
Click on the card in the LH Pane.
At the bottom of the Pane, set the default program to be Lightroom 4
Close.
It should work now.

Poor Image Quality when Printing PDF from Office 07 using Acrobat 9 Pro Ext

Hi there,
Hoping to figure out why my images (jpegs, gifs, pngs, etc) seem to print in very poor quality when printing from Powerpoint and Word 2007?
When I actually print out the pdf onto paper, the images seem fine. The image quality is also good in Word and Excel
I did not have this problem using Office 2003 products.
Is this a common problem? I realize that the problem maybe Office related but any help or information appreciated.
Thanks

If the images' file format is PNG or TIFF you could play with the compression settings available in Acrobat's Preferences.
Edit > Preferences > select the Category "Convert to PDF".
In the"Converting To PDF" pane, select PNG or TIFF.
Then, click on the Edit Settings" button.
For either image format you could try one of the Lossless compression routines.
Be well...

How to get best possible quality ?

Hey whats up!
I wonder how can i get a best possible quality out of After Effects? I dont care about size , i just want best quality.
Every time i record PC gameplay then i edit a little bit on After effects , but when i render it it loses some quality and when i upload on Youtube its not even 1080p. I mean i have option in youtube to watch it in 1080p but quality is not 1080p! Any advice?
Thanks!

At the moment, this isn't about "quality", this is about horizontal and vertical dimensions of the video, and guess what? You don't even MENTION them! Maybe you ought to try looking up those properties of your video clips and reporting back in.....

How to get custom trigger result when insert

I set a trigger before insert, if the result was $aa = 50;
how to get $aa?
it doesn't work
$ins_testtable->addColumn("t_num", "NUMERIC_TYPE", "VALUE", $aa);

I tried this one, actually, {GLOBALS.variable_name} is one of mark-up language,I add echo $a this time, after submit, $a appear on the page, so I think "definea trigger" has been executed successfully, but still got error message
 
 http://uploads.screenshot-program.com/my.php?image=upl2682569831.jpg
 
 code
 --------------------------------------------------
 <?php require_once('Connections/conndb.php'); ?>
 <?php // Load the common classes require_once('includes/common/KT_common.php'); // Load the tNG classes require_once('includes/tng/tNG.inc.php'); // Make a transaction dispatcher instance $tNGs = new tNG_dispatcher(""); // Make unified connection variable $conn_conndb = new KT_connection($conndb, $database_conndb); //start definea trigger function definea(&$tNG) { global $a; $a = 100; } //end definea trigger // Make an insert transaction instance $ins_testtable = new tNG_insert($conn_conndb); $tNGs->addTransaction($ins_testtable); // Register triggers $ins_testtable->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "POST", "ins"); $ins_testtable->registerTrigger("BEFORE", "definea", 50); // Add columns $ins_testtable->setTable("testtable"); $ins_testtable->addColumn("t_name", "STRING_TYPE", "POST", "t_name"); $ins_testtable->addColumn("t_num", "NUMERIC_TYPE", "VALUE", "{GLOBALS.a}"); $ins_testtable->setPrimaryKey("t_id", "NUMERIC_TYPE"); // Execute all the registered transactions $tNGs->executeTransactions(); // Get the transaction recordset $rstesttable = $tNGs->getRecordset("testtable"); $row_rstesttable = mysql_fetch_assoc($rstesttable); $totalRows_rstesttable = mysql_num_rows($rstesttable); ?>
 
 
 
 
 
 
<script src="includes/common/js/base.js" type="text/javascript"></script>
 
<script src="includes/common/js/utility.js" type="text/javascript"></script>
 
<script src="includes/skins/style.js" type="text/javascript"></script>
 
 
 
 <?php echo $a; ?>
 
<form id="form1" name="form1" method="post" action="">
 
<label for="t_name">tname</label>
 
<input type="text" name="t_name" id="t_name" />
 <?php echo $tNGs->getErrorMsg(); ?>
 
<input type="submit" name="ins" id="ins" value="submit" />
 </form>

How to get good image quality for an icon

In the constructor of the main class which extends JFrame I set an icon by saying:
this.setIconImage(new ImageIcon("image.jpg").getImage());
This does not only set an icon on the title bar and the minimized window, it also creates an icon on my saved files (which are created with JFileChooser and ActionListener). However, the image quality of the icon on my saved files is bad, even though the image quality of the other icons is ok.
The bad quality image has broken lines where it is supposed to have smooth lines. The size of the image I am providing is close to the size of the icon on my saved files, but the image I am providing looks a lot better (in Photoshop) than the icon.
How did the icon get created for my saved files? Is it possible to improve the image quality?
Thanks for looking at this!

Well, it wasn't Java that created the icon on the saved files. It was the operating system, which used the icon that I had on my executable, once I said "open with" this executable.
Well, now I am using a better icon maker program from Axialis, which creates icons at different sizes, and the icon on my saved files look perfect.
Sorry for taking your time thinking about this.

How to get auto generated key when inserting using C#

I inserted a row in a table in oracle 11g as follows:
public void add(Admin admin)
OracleConnection myOracleConnection =
new OracleConnection(connStr);
myOracleConnection.Open();
OracleCommand myOracleCommand = myOracleConnection.CreateCommand();
myOracleCommand.CommandText = "Insert into Admin values(adminSeq.nextVal,:name) returning admin_id into :adminId";
myOracleCommand.Parameters.Clear();
OracleParameter para=new OracleParameter(":adminId",ParameterDirection.Output);
myOracleCommand.Parameters.Add(para);
myOracleCommand.Parameters.Add(":name", admin.Name);
myOracleCommand.ExecuteNonQuery();
admin.AdminId = int.Parse(myOracleCommand.Parameters[":adminId"].Value.ToString());
I found a new row a ADMIN, but I can not get the PK when inserting. the value of "myOracleCommand.Parameters[":adminId"].Value" is always "OUTPUT" , any ideas?
Thank you.
Edited by: user11228816 on 2010-3-1 上午12:17

Does not seem to be an Oracle issue itself. Your approach is correct. E.g.
SQL> create table foo( id number, name varchar2(20) );
Table created.
SQL>
SQL> create sequence foo_id start with 1 increment by 1 nomaxvalue nocycle;
Sequence created.
SQL>
SQL> var id number
SQL> insert into foo values( foo_id.nextval, 'test1') returning id into :id;
1 row created.
SQL>
SQL> print id
ID
1
SQL>Check your bind calls. Is the bind name index value for example not perhaps +["adminId"]+ (no bind char marker)?
Also, the binding of the output parameter, i.e.
para=new OracleParameter(":adminId",ParameterDirection.Output);In OCI, when binding, one needs to specify the data type for the bind. When binding strings for example, the length also needs to be specified. This bind seems to be untyped. Yet, you apply a "+ToString()+" method to it when referencing it.. how would the Parameters class know its data type?
Can you do explicit data type binding in C#? If so, try and bind the parameter explicitly as an integer and reference it as an integer when getting its value.

AcroExch missing when embedding PDF into Word document

When I try to embed a pdf into a word document, the well known message "The program used to create this object is AcroExch. That program is not installed on your computer...".
I'm working with on Windows 7, Office 2010 and Adobe Acrobat XI (all 64Bit, patch level up to date).
downgrading to Acrobat 9.5 would solve the problem, but does not match to our company policy.
Any help, how to solve the problem with current versions?

You want the Acrobat Forum

How to get poster image (from_movie) when placing SWF file with JS?

I am able to place the poster from movie (flv) file. SWF files seems to belong to Movie class. I can place the generic posters (standard, none and proxy_image), but not "FROM_MOVIE".
I am getting the following error message:
"Error 81926" "The poster image could not be changed to the requested image".
I will attach my code (sligtly modified from the sample "placeMOVIE" which is coming with CS5) containing also code for other property settings to be tested.
Hoping to find a good solution for this, thanks in advance!
Erkki
/PlaceMovie.jsx
//An InDesign CS5 JavaScript
//Shows how to import a movie file.
main();
function main(){
 mySetup();
 mySnippet();
 myTeardown();
function mySetup(){
 var myDocument = app.documents.add();
 myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points;
 myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points;
 myDocument.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin;
function mySnippet(){
 var myDocument = app.documents.item(0);
 var myPage = myDocument.pages.item(0);
 //<fragment>
 //Given a page "myPage"...
 var myFrame1 = myPage.rectangles.add({geometricBounds:[72, 72, 288, 288]});
 //Import a movie file (you'll have to provide a valid file path on your system);
 var myMovie = myFrame1.place(File("~/Desktop/SWFsivut/a1.flv"))[0];
 //alert("myMovie.name: " + myMovie.name)
 //alert("myMovie.visibleBounds: " + myMovie.visibleBounds)
 var mySWF_bounds = myMovie.visibleBounds;
 myFrame1.remove();
 var myFrame2 = myPage.rectangles.add({geometricBounds:mySWF_bounds});
 var myMovie2 = myFrame2.place(File("~/Desktop/SWFsivut/01.swf"))[0];
 //alert("myMovie2.name: " + myMovie.name)
 //alert("myMovie2.constructor: " + myMovie.constructor.name)
 //alert("myMovie2.moviePosterType (DEFAULT), 1852796517 = NONE" + myMovie.moviePosterType);
 //myMovie2.moviePosterType = 1852796517; //NONE
 //alert("myMovie2.moviePosterType, 1852796517 = NONE: " + myMovie.moviePosterType);
 //myMovie2.moviePosterType = 2020623970; //STANDARD
 //alert("myMovie2.moviePosterType, 2020623970 = STANDARD: " + myMovie.moviePosterType);
 myMovie2.moviePosterType = 1298558310; //FROM_MOVIE
 //alert("myMovie2.moviePosterType, 1298558310 = FROM_MOVIE: " + myMovie.moviePosterType);
 //myMovie2.moviePosterType = 1299216505; //PROXY_IMAGE
 //Add a preview image. You'll have to provide a valid path on your system.
 //myMovie2.posterFile = "~/Desktop/SWFsivut/a1.flv"; // this path works with colons !!!!
 //myMovie2.posterFile = "EkinHD/SWFsivut/01b.jpg"; // this path dont with slahes !!!!
 //alert("myMovie2.moviePosterType, 1299216505 = PROXY_IMAGE !!!: " + myMovie.moviePosterType);
 //</fragment>
function myTeardown(){

... still continuation to my question...
You can put the poster for SWF using UI Media panel as shown here. So does this mean that there is a bug in a scripting environment?

How do you increase image quality when importing from Illustrator?

I have a logo that I created in Adobe Illustrator that I'm trying to place in Muse. Every time that I do so, it's very low quality, fuzzy and pixelated. After doing some reading around the discussion board, I tried resizing the image in both Illustrator and Photoshop so that I wouldn't have to do so in Muse. That didn't help at all. I also tried adding 1% transparency, which also did no good. I know it's a high resolution image, so I have absolutely no idea what I'm doing wrong.
Thoughts?

Is there a solid white rectangle behind the logo in AI? If not, please try again after putting a 100% opaque white rectangle behind it.
When smoothing the edges of content (anti-aliasing), the options are limited if the background color is not specified (transparent). If the background colors are known and 100% opaque, then much higher quality anti-aliasing can be achieved.
PNG preserves transparency. JPEG is opaque. When going to JPEG I would have expected AI to have performed high quality anti-aliasing, but perhaps that isn't the case. If you open the PNG and/or JPEG output from AI in Photoshop does it look pixelated there?

How do l preserve image quality when reducing the size of my brochure for use as a pdf?

l've designed a brochure full of my work, and reduced the size so l can email the final pdf...but my test recipients are saying the images are not sharp...they are too soft.
Can anyone help me preserve image sharpness?

Don't use the resize feature as the images will be changed to 72 dpi. Resize the images BEFORE adding them to Pages. Make them about 200 dpi if they are to be printed. You can have less resolution if the pdf is only for the screen.

Any recommendations on how to get better audio quality when recording on iMovie 09?

My audio seems to lag a little & not be entirely in sync with the video.

There is no flash built into the iPad. You'll just have to use additional lighting, or find an app (if any such exists) that allows you to take time exposures (you'll need to have the iPad on a stand).
Night shooting with an iPad really isn't practical, in my opinion, particularly since the camera is of such low resolution. I'd strongly suggest you just use a digital camera or, if you have one, a cellphone with a camera and a flash.
Regards.

Poor image quality when viewing PDFs in Digital Editions

I recently bought a digital copy of a book in the .acsm file format. The site I bought it from recommended using Digital Editions. I am on a mac, OS X 10.6.3. When viewing this book, there are various screen shots that are essentially illegible in the single or double page format. If I use the zoom feature they become more legible but still of low quality. At first I thought it was the ebook I bought but I think it's Digital Editions, actually. As a test I opened a plain 'ol PDF in Preview that had some screenshots in it - and those looked good. Viewing the same PDF in Digital Editions though, the images were again of low quality.
Digital Editions doesn't seem to have preferences (like most OS X apps) that might allow me to tweak this. Is there something that can be changed in terms of settings to make the images clearer?
Also, as an aside, Digital Editions on the Mac seems to have some delay when I try to copy things from the text. I have to hold the command + c keys longer than I would otherwise in order to get the highlighted text to be copied.

In iTunes with you iPod connected select the Photos tab and check *Include full-resolution photos* and re-sync.

How to get best image quality when inserting PDF into Word?

Similar Messages

Maybe you are looking for