How to get Connection from Internet

I have Internet Connection having
Localhost I.P Address : 127.0.0.1
Network I.P Address : 192.168.0.26
Proxy I.P Address:      193.251.135.124
Real I.P : 203.135.59.209
I have TCP client server Sources, when I listen the port on my PC at 1000, I can send the request from client version if I use Server I.P as
Localhost
Lan Ip 192.168.0.26
But if i send it on Proxy or Real I.p , server hosted on same machine cannot recive,
Then How a Client Connect to My PC, without Any Server...
Any Idea????????

Currently, the Airport Express (not the Airport Express Extreme router) is acting as a base station via Ethernet to a cable modem.
I guess that it would be correct to assume that your new Mac can connect wirelessly to the AirPort Express base station, and access the Internet that way.
I am not sure if my 41/2 year old HP(Hewlect Packard) PC - (with AMD Athlon 64 3400 processor) which I am unable to get internet connection now is Wi-Fi capable.
You said "Prior to using the new Airport Express,I was using the Linksys wireless G router and have a wireless adapter sitting on top of my PC.". The wireless adapter would be Wi-Fi certified (they normally are). Is it a USB adapter? Please post back with the exact model.
Question: do I still need to use the adapter or not? Or the new Airport Express is enough to send internet signal to the PC?
A Wi-Fi adapter would act as a wireless network card for a PC, and should communicate wirelessly with an AirPort Express base station without a problem (providing that the chosen security/encryption is supported on both sides). Since the wireless adapter apparently was OK (with the Linksys router), you should be able to continue using it. Any other (built-in) wireless capability ought to be externally visible at the PC as a PCI card with an antenna.
Does the (Windows?) PC operating system detect any wireless networks? Is your AirPort Express on this list (even if you cannot connect or access the Internet)?
Jan

Similar Messages

  • How to get connection from TopLink

    Hi All,
    I am facing problem in production while getting connection through JNDI.
    Since i need some result from the view and some other data for business functionality. My toplink connection is working fine....but when i try to get connection through JNDI its failing because of network issues or more connection is opened in DB side. But toplink connection is working fine.
    So i want to use the toplink connection instead of JNDI to get my result.
    For that i used all the solution given in the forum to get the connection from top link. But when i using those thing it shows the method are deprecated.
    import oracle.toplink.internal.sessions.UnitOfWorkImpl; --- In this package all the methods are deprecated so i used this package (import oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl;)
    UnitOfWork uow = getSessionFactory().acquireUnitOfWork();
    uow.beginEarlyTransaction();
    connection = ((UnitOfWorkImpl)uow).getAccessor().getConnection();
    import oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl;-----
    when i used this package i am getting below exception
    08/12/21 09:58:20 java.lang.ClassCastException: oracle.toplink.internal.sessions.UnitOfWorkImpl
    08/12/21 09:58:20      at mof.egov.portal.POMasterDetailSessionEJBBean.checkValidSupplier(POMasterDetailSessionEJBBean.java:2207)
    08/12/21 09:58:20      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    08/12/21 09:58:20      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    08/12/21 09:58:20      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    08/12/21 09:58:20      at java.lang.reflect.Method.invoke(Method.java:585)
    Anyone help me to resolve the issues.
    Note : I am using, JDeveloper 10.1.3.3, EJB 3.0 (Stateless Session), TopLink
    Thanks & Regards
    VB

    Vimilan,
    Hi, try the following JEE snippet of EclipseLink code, the connection code you are using is for non-EE (SE EntityManagers - I received the same CCE as you in the past).
    [http://wiki.eclipse.org/EclipseLink/Examples/JPA/EMAPI#Getting_a_DataSource_from_an_EntityManager]
    Normally you let the JPA container manage all interaction with the datasource for your application. However, if you do require access to the datasource or connection in use by your JPA application, the following code should help you.
    The following line of code will get the current JTA or non-JTA datasource in use by an entityManager in a container managed JPA application using a JTA transaction-type.
    DataSource from a Container Managed EntityManager
    DataSource aDataSource = ((JNDIConnector)((DatabaseLogin)
    ((UnitOfWorkImpl)((JpaEntityManager)entityManager
    .getDelegate())
    .getActiveSession()
    .acquireUnitOfWork())
    .getProject()
    .getDatasourceLogin())
    .getConnector())
    .getDataSource();{noformat}
    Connection from an SE EntityManager
    The following code will return a null connection or cause a (non-narrow()) $Proxy ClassCastException if run on a container managed EntityManager, it is supplied for SE applications or one using the JavaSECMPInitializer or a RESOURCE_LOCAL transaction-type.
    Connection aConnection = ((UnitOfWorkImpl)((JpaEntityManager)entityManager)
    .getActiveSession()
    .acquireUnitOfWork())
    .getAccessor()
    .getConnection();
    thank you
    /michael [http://www.eclipselink.org|http://www.eclipselink.org/]
    Edited by: michael_obrien on Dec 21, 2008 2:16 PM

  • How to get connected to OIPM from Oracle WebCenter Document Capture

    Hi,
    How we get connected from Oracle WebCenter Document Capture(ODC) to Oracle WebCenter Cintent:Imaging (OIPM). OIPM is 11g and ODC is 10g. Pls suggest any doc or link.
    Thanks and Warm Regards,
    RR.

    Reading your previous question once again, now I think you have actually asked a simpler question than I answered to. Is it that you just need to anyhow send data from ODC to IPM?
    If so, it is a standard functionality of ODC, called Commit Profile. I have never worked with IPM, but there is one to UCM and it works the way that you use administrator's login (such as sysadmin in 10g or weblogic in 11g) for authentication and then you map ODC user to a metadata field (in UCM there is a mandatory field called dDocAuthor and there should be value of an existing user; but you can you the administrator here as well, if ODC user info is not important for you). I believe IPM will behave similar.
    What you have to check, whether commit profiles are available for IPM 11g, but I believe they are.
    As for the documentation, the link I mentioned before contains both installation and configuration manual, so you should find all the info there.

  • Open script cannot get connection from the brower helper after 15 seconds.

    Error:
    ===
    Open script cannot get connection from the brower helper after 15 seconds. Do you want to continue waiting for the browser to load?
    Please Note:
    ========
    1. I have tried this only on IE
    2. I am running OATS on a Remote desktop
    Situation:
    ======
    Trying to stop the recording
    Try to get xpath of an object using Inspect Path
    Setup details
    ========
    Windows XP 5.1 Service Pack 3, x86
    OpenScript 12.1.0.1.383
    Internet Explorer 8.0.6001.18702
    FireFox 13.0.1
    Mitigation steps done till now:
    ==================
    1. Disabled windows firewall
    2. Disable XSS filter setting
    3. Restarted the ATS services (3 of them)
    4. Run the Open Script Diagnosis Tool (PS: There are 3 errros even after running it. The 3 errros are listed in the workspace_log log file snippet below...)
    Error in worspace_log:
    =============
    To Change setting:
    Go to Tools > Internet Options and Choose Security Tab
    Select the Zone to modify and Press Custom level
    Find Enable XSS filter Setting - Select Disable and click Ok
    !ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
    !MESSAGE Failure found when diagnosing Oracle EBS/Forms Load Testing Forms LT Diagnoser
    !ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
    !MESSAGE Did not auto-fix the problem.
    !ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
    !MESSAGE Suggestion for fixing: Please change your Java proxy setting to Use Browser Settings
    Aprreciate help on this.

    To resolve this, you need to reconfigure the "Oracle Application Testing Suite Helper Service" (OATSHelperSvr) to start as a user who has privledges to run open script tests rather than the default SYSTEM user.
    Reconfiguring the OATSHelperSvr Service:
    1. Open the services panel (Start > Run > services.msc)
    2. Find the Oracle Application Testing Suite Helper Service
    3. Right Click > Properties then select the Log On Tab
    4. Specify an interactive user that has rights to run OpenScript (test by logging in as that user and running tests):
    5. Click OK
    6. Restart the service after dialogs are closed by Right Click > Restart
    7. You should now repeat this process for the "Oracle Application Testing Suite Agent Service" (eLoadAgentMon) Service (Two services in
    total)
    You should now retry running the test in Oracle Test Manager

  • How to get acknowlgmnt from EFT (debt card swap) machine from swing app.

    Hi,
    Please some 1 let me know how to get acknowlegdement from EFT ( debit card Swap) machine once it is connected to the computer.
    I have a code which seems to have no errors ut it I am not sure whether the EFT machine will be able to send or recieve the data once the car is swaped. because i dont know what is the response of the EFT machine when connected to the computer though a java swing class.
    I know it will be quite tidious job for you to go through my program but this is all i can do...or atleast give me a link where i can refer to such case.......I am using eclipe Ide....and have searched alot on google too......

    Vish_1x1 wrote:
    Hi,
    Please some 1 let me know how to get acknowlegdement from EFT ( debit card Swap) machine once it is connected to the computer.What do you mean by "acknowledgement"? You realise it needs some sort of authorising host in order to authorise, right?
    I have a code which seems to have no errors ut it I am not sure whether the EFT machine will be able to send or recieve the data once the car is swaped. because i dont know what is the response of the EFT machine when connected to the computer though a java swing class.Mumbo-jumbo
    I know it will be quite tidious job for you to go through my program but this is all i can do...or atleast give me a link where i can refer to such case.......I am using eclipe Ide....and have searched alot on google too......Where did you get this "EFT machine" (whatever that is)? Do you mean a card reader? An EMV terminal? A PDQ? What? Where did it come from? Start there. If you need to get this thing working, you must be part of an enterprise, which has access to resources such as hardware vendor support, merchant banking services and EFT software vendors. If you're not, then you might as well abandon all hope of using this machine to take cards on your own, because you can't. End of story
    And, no, nothing to do with Java

  • HT1498 Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!

    Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!

    Issues are usually network related
    What is your internet speed? www.speedtest.net
    6mbps is required for instant HD (you can switch to SD in the settings)
    If on wifi try ethernet and www.istumbler.net to rule out interference
    Make sure you're using your ISP's DNS

  • How to get answers from forum

    Hi,
    Just wondering, how to get answer from forum.  Some time, for simple question, I don't see anybody replying. 
    Is there any other platform we get define answer or is there any support who can connect to our system suggest resolution?
    Thanks,
    -Anand

    anand_gp wrote:
    Just wondering, how to get answer from forum.  Some time, for simple question, I don't see anybody replying.
    If it's really a simple question, then most people probably think the poster can get the answer from the documentation, or by searching the forum for previous answers.
    However, most of the time, it's not that the question actually is simple. It's usually a question that is being asked simplistically, making it nearly impossible to answer (or often even understand). To get an effective response to a question, it needs to be the right question, asked in the right way.
    Describe the the problem/requirement (not the attempted solutions) in detail:
    How to ask questions
    Re: 2. How do I ask a question on the forums?
    Include as much relevant information with the question as possible, starting with:
    APEX version
    DB version, edition and host OS
    Web server architecture (EPG, OHS or APEX listener), server platform, and host OS
    Browser(s)/version(s) used
    UI/Theme
    Templates
    Region type (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
    With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. To get a detailed answer then it's appropriate for the questioner to take on a significant part of the effort by reproducing the problem on apex.oracle.com before asking for assistance with specific issues, which can then be seen at first hand in a real APEX environment.

  • How to get pictures from computer to iphone

    how to get pictures from computer to i phone 4s

    Sync them as you would anything else.
    Open itunes, connect iphone, select what you want, sync.

  • How to get photos from pc to iphone ?

    how to get photos from pc to iphone?

    1. Connect your iDevice to your computer with the USB connector. Open iTunes and select your device from the left sidebar. Then, select the photos tab from the top menu.
    2. Organize and sync.
    First choose where you’d like to sync your photos from. I use iPhoto, but you can use any photo management system.
    Check the box next to each album &/or event you’d like to sync.
    Alternatively, you could put all the photos you want to transfer into a separate folder on your computer, and choose to sync just that folder from the drop down menu.
    Notice that I’ve checked the box “Include videos” so any included videos will also sync.
    When your selections are made, click “Apply” and the photos will sync to the photo library on your device.

  • How to get CLOB from stored procedure via StoredProcedureCall

    hi all
    I got "sp" on server : procedure get_text(p_in in varchar2, o_list out clob);
    in code:
    StoredProcedureCall call = new StoredProcedureCall();
    call.setProcedureName("get_text");
    call.addNamedArgumentValue("p_in", new String("MyList"));
    call.addNamedOutputArgument("o_list"); // <- out CLOB
    Vector v = (Vector)this.m_UnitOfWorkt.executeSelectingCall( call ); // <- here I got error
    but if o_list is varchar is all ok
    so how to get data from clob?
    Please help
    Regards
    Krzysztof

    Post Author: achaithanya
    CA Forum: Data Connectivity and SQL
    I'm connecting to database through stored procedure only.We have sybase installed on our local system so that we are given permissions only to access the stored procedures.When u see the fields in CR XI i.e Field explorer you are able to see only 1st result fileds.I connected to sybase and there i'm able to see the output of 1st & 2nd Result set.
    Regards,
    Chaithanya.

  • How to extract data from Internet explorer & active MS office applications?

    Hi all,
    Need advice on "How to extract data from Internet explorer & active MS office applications"?
    Thanks in advance
    regards
    DIlip

    If ths search list isn't what you want, just search again:
    http://www.google.com/search?q=get+excel+data+in+java

  • Get Connection from connection pooling

    Hi,
    I am aware of the fact that to get connection from a connection pool we need to add JNDI name in context.xml of apache tomcat and use it in our application to get connection. I have tested this and it works fine.
    Now, we have 12 servers having free database each having almost 20 small Java applications for different purposes (get data from server database do some business logic and maipulation with data from central database and store on central database) each connecting to central database.
    We were enjoying life till we had almost 8-9 servers but now many times we have connection issues as there are too many connections to central database and servers are going to increase.
    I know my company design is not good but we need some solution.
    I want my Java applications to take database connectivity using connection pooling on servers. My Java applications are standalone applications that do not run in web server. Is this approach fine?
    I searched google for some solution but was unable to find.
    Any pointers would be really helpful.
    I think that since my application is outside web container I am unable to get Context (java:/comp/env). Please give me some pointers on how can i get web server context outside web server.
    Thanks and Regards,
    Vikash Anand.

    Google ( [jndi standalone application|http://www.google.com/search?q=jndi+standalone+application] ).

  • Weblogic realm authentication failure getting connection from pool

    We are getting this error when we try to get a connection from the
    pool for a Tx Data Source. We are successfully getting connections
    from a (non-Tx) Data Source.
    java.lang.SecurityException: Authentication for user Fitness_demo
    denied in realm weblogic
    at weblogic.security.acl.Realm.authenticate(Realm.java:212)
    at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
    at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
    at weblogic.security.acl.Security.doAsPrivileged(Security.java:481)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:127)
    We have added the DB user as a user in the realm, which usually does
    the trick; but in this case it does not. We are using Merant's
    JSQLConnect type 2 driver for SQL Server, and we are running on
    Solaris. The scenario works fine using Oracle Thin driver on Windows.
    Do we need ACL entries or something? We do not have any ACL entries
    now.
    Thanks,
    -wes

    We are getting this error when we try to get a connection from the
    pool for a Tx Data Source. We are successfully getting connections
    from a (non-Tx) Data Source.
    java.lang.SecurityException: Authentication for user Fitness_demo
    denied in realm weblogic
    at weblogic.security.acl.Realm.authenticate(Realm.java:212)
    at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
    at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
    at weblogic.security.acl.Security.doAsPrivileged(Security.java:481)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:127)
    We have added the DB user as a user in the realm, which usually does
    the trick; but in this case it does not. We are using Merant's
    JSQLConnect type 2 driver for SQL Server, and we are running on
    Solaris. The scenario works fine using Oracle Thin driver on Windows.
    Do we need ACL entries or something? We do not have any ACL entries
    now.
    Thanks,
    -wes

  • How to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos

    how to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos

    Make sure Settings > iCloud > Photos > iCloud Photo Library (Beta) = "Off"
    Then sync your iPhone using iTunes and make sure your sync settings for photos are set correctly in iTunes.

  • I got a new computer and don't know how to get music from ipod touch to itunes library

    I recently got a new computer and don't know how to get music from my ipod touch to show on my itunes library. 

    You need to transfer the iTunes folder from the old computer to the new one.
    iTunes: How to move your music to a new computer (Mac or Windows):
      http://support.apple.com/kb/HT4527

Maybe you are looking for