How to get Date Difference in Query with Replacement Path !

I need to get nr of days between two days. I knew that we can do this by replacement path in the queries. But when Iam trying to use replacement path with
this two chars and put it in a formula the result is not showing correctly.
Eg: I have dates Date1, Date 2 and I created two variables calles DateA ,Date B with reference to Date1 and Date2.
Now Iam creating a formula sayint that (Date2 <> 0) * (Date1 - Date2) ...Here Date2 has sometimes balnk value...Iam getting the values when there is dates for both chars...But if there is one value is blank
then Iam getting a strange value ....
can any body send me step by step on how to fix this...
Thanks

Hi Sam,
another important think you have to remember when having aggregated information is to divide the date1 and date2 key figures with the number of lines used in aggregation.
Remember that date1 (internally) is a numerical value from some initial date which is used as reference. E.g., if the reference date is 01/01/0001 and you have the date 15/01/0001 then key fig. date1 internally stores just the value 14. So if you have something like:
                         date1       date2        diff
customer1 material1       14          18           4 <- correct
customer2 material1       14          18           4 <- correct
and then you make an aggregation by removing customer from your report then you will have the following situation:
                         date1       date2        diff
material1                  28          36           8    <- wrong
So, you would have to divide by 2 in the second case. Please try to check the above and proceed accordingly. Let us now if something else weird appears.
Best regards,
Theodoros

Similar Messages

Nav Attribute Calculation in Query with replacement path variable

Gurus,
Can we use attribute of a charecteristic in calculation based on the sap how to below.
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc&overridelayout=true
Basically above document uses attribute which is KF key figure ,but i want to use a attribute which is if type - NUMC.
So the question is can i directly use the same steps mentioned in the link or need to modify because the type is NUMC.
Thanks in advance

Hi Andrew,
You can not use the attribute with NUMC in calculation. In order to do the calculatio based on attribute you have to create the attribute as Key Figure type. I mean to say as described in the document.
NUMC is data type Char string with numbers and you can not do calculation based on Char string.
Regards,
Kams

How to get date difference in terms of years,months and also days

Tool : Eclipse
Framework : JSF & Springs
JRE : jdk1.5.0_06
Iam using oracle 10G DB as back end.I have two date fields in a table.
1)premium_paying_start_date
2)premium_paying_end_date
Iam getting these two dates from the database and storing these values within a entity.Now in the delegate layer,
i have to get the premium_term i.e, the difference between the two dates(premium_paying_end_date-premium_paying_start_date).
The difference should show the year,month and no of days difference.
For example :
premium_paying_start_date : 14-10-1984
premium_paying_end_date : 01-03-2008
Difference should be : 23 Y : 4 M : 15 D (Y = years, M = months , D= days)
So please give me the solution for this.

Difference should be : 23 Y : 4 M : 15 D (Y = years, M = months , D= days)
So please give me the solution for this.How did you determine what the difference should be?
~

How to get date difference in data sources

Hi,
In SQL:SELECT DATEDIFF(day, '2005-12-30 23:59:59.9999999', '2005-12-30 00:00:00.0000000');
output :1
As similar way how get the datediffence in SAP business by design of the datasources.
Regards,
Prasad

Hi Prasad,
For this you have to create a Custom DATA SOURCE for the required BO. Then Select all the required fields that you want to use it in the report for that datasource.
The 3rd step of Data Source Wizard is shown in the image, here you can add a extra field that can hold the difference between the DateTime elements present in the BO.
In the left column BUSINESS OBJECT ELEMENT choose DATE element (1st Date).
In the right column TRANSFORMATION choose DateTime To Duration row and in the PARAMETER Column choose the field against which you want to calculate the difference.
In Defined Field Name enter a name, this will hold the value of the calculated difference.
Thank You
Shabaz

How to get data out of quiz with POST or GET?

Seems like a simple question, but I haven't yet been able to
capture the results of a quiz yet. I want to fetch the POST data
from the quiz in PHP using something like:
$quizTotal = $_POST['total'];
$quizCorrect = $_POST['correct'];
Alternatively, I can use ASP:
quizTotal = request.form("total")
quizCorrect = request.form("correct")
But I still haven't been able to get ANY data out of a quiz.
HOW?

benhenny,
Are you trying to capture data locally and send to a
server-side script - or
use the existing LMS functionality to capture the post (for
AICC) in a PHP
script?
Regards,
Andrew

How to get InputStream from a file with absolute path?

Hi, guys:
If I have file with a absolute path that may be inside/outside
my Eclipse plugin, I want to get an InputStream from it. It just keeps giving me null for "is":
String absFilePath = "/D:/my_dir/.../sample_file.txt";
InputStream is = getClass().getResourceAsStream(absFilePath);
regards,

Don't use resource as stream if you have an absolute path, use FileInputStream.

How to compare result from sql query with data writen in html input tag?

how to compare result
from sql query with data
writen in html input tag?
I need to compare
user and password in html form
with all user and password in database
how to do this?
or put the resulr from sql query
in array
please help me?

Hi dejani
first get the user name and password enter by the user
using
String sUsername=request.getParameter("name of the textfield");
String sPassword=request.getParameter("name of the textfield");
after executeQuery() statement
int exist=0;
while(rs.next())
String sUserId= rs.getString("username");
String sPass_wd= rs.getString("password");
if(sUserId.equals(sUsername) && sPass_wd.equals(sPassword))
exist=1;
if(exist==1)
out.println("user exist");
else
out.println("not exist");

How to get the difference of two dates in years,months and days

Hi friends,
how to get the difference of two dates in years,months and days
for ex 2 years 3 months 13 days
select (sysdate-date_Start) from per_periods_of_service
thanks

Something like this...
SQL> ed
Wrote file afiedt.buf
1 with t as (select to_date('17-nov-2006','dd-mon-yyyy') as c_start_date, to_date('21-jan-2008','dd-mon-yyyy') as c_end_date from dual union all
2             select to_date('21-nov-2006','dd-mon-yyyy'), to_date('17-feb-2008','dd-mon-yyyy') from dual union all
3             select to_date('21-jun-2006','dd-mon-yyyy'), to_date('17-jul-2008','dd-mon-yyyy') from dual
4             )
5 -- end of test data
6 select c_start_date, c_end_date
7        ,trunc(months_between(c_end_date, c_start_date) / 12) as yrs
8        ,trunc(mod(months_between(c_end_date, c_start_date), 12)) as mnths
9        ,trunc(c_end_date - add_months(c_start_date, trunc(months_between(c_end_date, c_start_date)))) as dys
10* from t
SQL> /
C_START_D C_END_DAT        YRS      MNTHS        DYS
17-NOV-06 21-JAN-08          1          2          4
21-NOV-06 17-FEB-08          1          2         27
21-JUN-06 17-JUL-08          2          0         26
SQL>But, don't forget that different months have different numbers of days, and leap years can effect it too.

How to get the difference of two dates?

let's say i have a table named tblData and has 4 columns: data_RefNo, data_DateReported, data_TargetDate, data_Data
tblData returns 2 rows.
data_RefNo.............data_DateReported.............data_TargetDate........................data_Data
10000................10-20-2004 10:55:44 AM........10-20-2004 10:57:44 AM........Slow Response Time
10000................10-21-2004 10:55:44 AM........10-21-2004 11:55:44 AM........Bug Error
i just wana ask how to get the difference of the date_DateReported and date_TargetDate.
i tried this code but it didnot work
public Vector get_con_pf()
Vector vData = new Vector();
String query = "SELECT * FROM tblData WHERE data_RefNo= '"'10000'"'";
try
    DBConnect db = new DBConnect();
    db.openCon();
    ResultSet rs = db.execute(query);
    while (rs.next())
      vData.addElement(DATEDIFF(mi, rs.getString("st_DateReported"), rs.getString("st_TargetFinishDate")));
    db.closeCon();
catch (Exception e)
    System.out.println("Error: " + e );
return vData;
i want to return the difference of the data_DateReported and date_TargetDate, i did this
vData.addElement(DATEDIFF(mi, rs.getString("st_DateReported"), rs.getString("st_TargetFinishDate")));but it didnot work.
How do i get that? because i want to return a vector.
the code must return the values:
2 for the 1st rows because the difference is only 2 minutes, and
60 for the 2nd row.

ooops i tried this one:
query = "SELECT *, DATEDIFF(mi, data_DateReported, data_TargetDate) AS diff FROM tblData WHERE data_RefNo = '10000'";and it works.
hehehehe!!!!!!
problem solved! :)

How to get data with the raw pattern from resultset ?

would you tell me how to get data with the raw pattern from resultset ?
thank you in advance!
longgger2000

I tried getBytes() and getObject()
, but I can not get the right result , for example the
data in oracle database is 01000000DFFF, when In used
the method of getBytes() and getObject(), I get the
result of [B@1c2e8a4, very different , please tell me
why !
thank you
longgger2000
[B is byte arrayseem that it return an bytes array for you.

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

Get Date Difference between 2 date values as days

Hi,
How to get the difference between 2 dates in number of days format. Say if i need the difference between 2012-08-23 and 2012-08-20 as 3
Please help..

Hi,
You can do it in XSLT since the dates are in ISO 8601 format...
http://www.w3.org/TR/NOTE-datetime
Here is a sample XSLT...
<xsl:stylesheet version="2.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:fn="http://www.w3.org/2005/xpath-functions">
<xsl:template match="/">
<xsl:variable name="date1" select="xs:dateTime(/root/date1)"/>
<xsl:variable name="date2" select="xs:dateTime(/root/date2)"/>
<xsl:value-of select="fn:days-from-duration($date2 - $date1)"/>
</xsl:template>
</xsl:stylesheet>The above XSLT will result *4* for the following input...
<root>
<date1>2012-01-11T00:00:00.000-05:00</date1>
<date2>2012-01-15T00:00:00.000-05:00</date2>
</root>You can test this example here...
http://xslttest.appspot.com/
Hope this helps...
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

How to get data into BI system

Hi Experts,
         I am a newbie to SAP BI. Please guide me how to get the data from tha R/3 tables into BI system tables. When I check the data in SE11 in R/3 (for ex: VBAK, VBAP...... etc), I could see all the records. Now how can I get the same data in BI system tables? When I check in BI system with Tcode SE11, I couldn't find any data for the tables VBAK,VBAP..... etc. Please guide me how to fill these tables in BI from R/3. Points will be rewarded for the solutions.
Regards,
Ravi

Hi Ravi,
    U can follow the link and know how to get data from R/3 to BI.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/28/4c553c42360a40e10000000a114084/frameset.htm">data sources</a>
   Still I give overview to u. U need to create data source in R/3 side, replicate them in BI and use them in your info source to load the data. Data source are of two type application specific (system generated) and generic (customer defined). Data Extraction can be based on table, view or infoset query.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN *

How to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to get Date Format from Local Object.

Hi All,
I am new to Web Channel.
I need to know Date format From date of locale.
suppose there is a date "01/25/2010" date in date field I want to get string "mm/dd/yyyy". Actually I have to pass date format to backend when I call RFC.
Is there any way to get Date format from "Locale" object. I should get date format for local object
I get local object from "UserSessionData" object but how to get Date format from it.
I am not looking for Date value. I am looking for current local date format ("mm/dd/yyyy or dd/mm/yyyy or mon/dd/yyyy) whatever local date format. I could not find example which show how to get date format from "Locale" object.
Any help will be appreciated with rewards.
Regards.
Web Channel

Hi,
You can get it from "User" or "Shop" business object.
Try to get User or Shop Business Object as shown below.
BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
User user = bom.getUser();
char decimalNotation = user.getDecimalPointFormat().getGroupingSeparator();
If you are seeing "1,234.00" then above code will return "."
I hope this information help you to resolve your issue.
eCommerce Developer.

How to get Date Difference in Query with Replacement Path !

Similar Messages

Maybe you are looking for