How to get denomination of Notes ? for the amount paid

Dear Freinds
   i have requirement where the total amount obtained by a employee through Cash . They wanted to have denomination
for the amount paid ito that employee
ex : An X employee got RS.5550 rupees as cash. They wanted to know how much money has been paid in Denomination
of  10 Rupee notes,20 Rupee notes,50 Rupee notes,100 Rupee note,500 Rupee note & 1000 Rupee notes.
so the data has to be displayed should be
since the employee is gettign 5550 --> it has to 1000*5 --> Five Thousand rupees notes --- 5 count should come
500 will be paid as ---> 500 * 1  -
Five hudress count is 1
50 is the balance -
it will be paid as fivty note -- Count is 1.
so i have to get  5000------ count 5 , 500 count 1,50 count 1. Can any one go this type of denomination doing code please
let me know how to proceed.
Regards
divya
Edited by: Divya Kumari on Jul 8, 2011 2:18 PM

Actually
the scenario is that in some employees ( if you go employee subgroup) like daily labour and casual labours will be paid
on daily bais for them they will not be paid to bank . I n that case  those type of employees will be paid by CASH. So in teh month end the company wanted to knwo what type and how much money paid .
regards
divya

Similar Messages

  • 2 days ago i rented The Avengers, beside it took almost 7h to download, at the end it did not get fully downloaded... 20 last minutes were not there. I know is just 5 dollars, but, how can i make a claim for the amount paid?

    2 days ago i rented The Avengers, beside it took almost 7h to download, at the end it did not get fully downloaded... 20 last minutes were not there. I know is just 5 dollars, but, how can i make a claim for the amount paid?, what if I buy a movie later? i will get the same problem!!! still I do not know how the avengers ends!! please do not tell me haha, focus on the problem here!

    Welcome to the Apple Community.
    Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
    Currently, if your purchase happens to be your most recent purchase you will not be redirected to the report form, in this case use the report a problem option from the invoice that was emailed to you.
    I believe your issues are probably a network issue, which unless you resolve are likely to be repeated again.

  • How to get a week number  for the year using oracle sql query?

    hi everyone,
    i have the requirement to find the week number for the calender..
    so that week number should start with 01 when the year starts and it should end with week end date(that is first saturday of the january month).. so next week number starts with sunday and ends with saturday ,continously.. in the end date of the year it should not be 'saturday' but week number should end with last date of the year.. again in the next year it should start with '01'.
    for example:
    01-JAN-13 tuesday 01
    02-JAN-13 wednesday 01
    03-JAN-13 thursday 01
    04-JAN-13 friday 01
    05-JAN-13 saturday 01
    06-JAN-13 sunday 02
    07-JAN-13 monday 02
    26-DEC-13 thursday 52
    27-DEC-13 friday 52
    28-DEC-13 saturday 52
    29-DEC-13 sunday 53
    30-DEC-13 monday 53
    31-DEC-13 tuesday 53
    01-JAN-14 wednesday 01
    02-JAN-14 thursday 01
    how can i achieve this, can anyone please help me out on this..
    i have a query that starts with 01 when year starts but it gives problem in the end of the year .. described below with a query..
    select mydate,
    to_char(mydate,'day') as weekday,
    to_char(next_day(mydate,'sunday'),'iw') as week_num
    FROM ( SELECT TRUNC (SYSDATE, 'yy') - 1 + LEVEL AS mydate
    FROM dual
    CONNECT BY LEVEL <= (SELECT TRUNC (ADD_MONTHS (SYSDATE, 24), 'yy')
    - TRUNC (SYSDATE, 'yy')
    FROM DUAL))
    this query gives date, weekday and week_num for 2 years 2013 and 2014,
    when i run this query ,at the end of the 2013 it gives the result as,
    26-DEC-13     thursday      52
    27-DEC-13     friday      52
    28-DEC-13     saturday      52
    29-DEC-13     sunday      01
    30-DEC-13     monday      01
    31-DEC-13     tuesday      01
    01-JAN-14     wednesday     01
    02-JAN-14     thursday      01
    for dates 29 ,30,31st it should give 53 .. how can i achieve that using this this query .. can any one help me out on this please...
    thanks,
    pradeep

    I tried with the IW ...
    it is giving week_id for the year.
    select
    mydate,
    to_char(mydate,'day'),
    case when mydate between trunc(mydate,'yyyy') and next_day(trunc(mydate,'yyyy'),'saturday')
    then to_number(to_char(mydate,'yyyy')||to_char(trunc(mydate,'yyyy'),'iw'))
    when mydate between next_day(trunc(mydate,'yyyy'),'saturday') and trunc(add_months(trunc(mydate,'yyyy'),12)-1,'d')-1
    then to_number(to_char(mydate,'yyyy')||to_char(next_day(mydate,'sunday'),'iw'))
    when mydate between trunc(add_months(trunc(mydate,'yyyy'),12)-1,'d') and add_months(trunc(mydate,'yyyy'),12)-1
    then to_number(to_char(mydate,'yyyy')||to_char(trunc(add_months(trunc(mydate,'yyyy'),12)-1,'d')-1,'iw')+1) end as WEEK_ID
    FROM ( SELECT TRUNC (SYSDATE, 'yy') - 1 + LEVEL AS mydate
    FROM dual
    CONNECT BY LEVEL <= (SELECT TRUNC (ADD_MONTHS (SYSDATE, 24), 'yy')
    - TRUNC (SYSDATE, 'yy')
    FROM DUAL
    ))

  • How to get list of permissions for the PCD location

    Hello Team,
    I have group called "ABC". We have lots of roles created in PCD, and some of the roles are assigned to "ABC" group. I want to list out all the roles which is added to the group "ABC".
    Can you please help me?
    Thanks
    Manoj K

    Hi,
    Thanks for the reply.
    Yes, i would like to know what are all the PCD roles which are assigned to group "ABC".
    Yes, you are right, that we can select the group in user Management and if we click on the "Assigned roles" and if we use the string * then we will get a list.
    But if i do that, it is giving below information.
    Last search returned 134 elements. This exceeded the defined max hits of 50. Narrow your search criteria and search again.
    So,this information i got when i select the Search Recursive button, So, i want to know how to get these 134 list from User Management.
    Thanks
    Manoj K

  • How to get rid of zeros for the data which has been extracted with open hub

    Hi all
    I am trying to extract data from the cube thru an open hub, but the data which i have extracted, for a cost center i am able to see '0's which is expected to be an empty space, even in cube there is an empty space.
    Can anyone suggest me quickly, points will be rewarded
    thanks
    preethi......

    In the transformation of the Open Hub,use BAPI....
    Create a target structure with all fields as type characters,move data from source structure to target structure in the BAPI using ABAP codes.When there is no value in character fields it would not show up 0's.

  • Who to get Actual Shipment Date for the Sales Order

    Dear All,
         How to Get Actual Shipment Date for the given sales order.
    REgards
    sudheer

    Hai,
    If you want the actual shipment date of an order call the function module RV_ORDER_FLOW_INFORMATION and pass the order number as vbeln in the structure COMWA.select the values from the return table which corresponds to 'J' type which are delivery and get thedate.
    THis will give the actual delivery date (if created).
    Oher way is to look for vbeln in table LIPS using VGBEL = order number as the selection criteria.
    Cheers,
    Sandeep

  • I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem.  How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

    I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port).  I see the drive on my laptop and I can add and delete files no problem.  How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive?  I don't have enough space to do that.

    How did you move the music to the external drive?  What exactly is on the drive?  The entire iTunes folder or only music?  If it is the entire iTunes folder you can do the option+start suggestion earlier.  If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move.  iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

  • HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    See if this helps:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

  • Just got a new MacMini.  Migrated files using Time Machine.  However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one.  How do I get rid of these updates?  They won't delete!

    Just got a new MacMini.  Migrated files using Time Machine.  However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one.  How do I get rid of these updates?  They won't delete!

    Only thing I can think of is trying this Lion trick...
    http://www.cultofmac.com/106030/how-to-nuke-lions-launchpad-and-start-over/10603 0/

  • How do I get itunes to not list the same artist more than once?

    How do I get ituens to not list the same artist more than once?  I have tried editing the info, sorting different ways and sometimes it works and sometimes not...it's very frustrating to me to have the same artist listed multiple times...

    Setting a common Album Artist for each Album does most of the work. For deeper problems see Grouping tracks into albums.
    In general you need to make sure that all the values in the tags are used consistently. Same spelling, same capitalization, same accents, no leading, trailing, or multiple spaces, and each value of Artist, Album Artist or Album should only be associated with one value of Sort Artist, Sort Album Artist or Sort Album respectively.
    tt2

  • I would like to update my eMac from 10.4.11 to 10.6. How can I get this os version for the update?

    I would like to update my eMac from 10.4.11 to to 10.6.x How can I get this os version for the update?

    Highest an eMac can go is 10.5.8...
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Trouble is appl no longer sells it, you have to search eBay & such for the full retail version, not any grey Install Disc.
    There are workarounds if the 867MHz is the only hangup...
    http://sourceforge.net/projects/leopardassist/
    List of Applications Not Compatible with Leopard...
    http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.

  • Why is it that I want to allow updates but it keep asking for my old account password which I totally stop using. How do I get it to ask for the current 1

    MMy iPad need me to approve a few updates. But it keep asking me for my old account information that I just don't remember, how I get it to ask for password for the current account

    You need to delete and redownload all of the applications associated with the old Apple ID.
    (117093)

  • I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I

    I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
    Thank you.

    Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

  • How to write a case statement for the totals column of two different years (2013 and 2014) of the same month so that I can get a +/- column

    Please Help!!!
    How to write a case statement for the totals column of two different years (2013 and 2014) of the same month so that I can get a +/- column.
                                      January 2014         January
    2013                            +/-
                    Region   Entry   Exit  Total    Entry   Exit   Total   (Total of Jan2014-Total of Jan2013)
                    A               2         3      
    40        5       7        30                    40-30= 10

    What is a table structure? Sorry cannot test it right now..
    SELECT <columns>,(SELECT Total FROM tbl WHERE Y=2014)-(SELECT Total FROM tbl WHERE Y=2013)
    FROM tbl
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How user can get a Sales Text for the any Line Item in the Billing?

    Salute Masters ! !
    How user can get a Sales Text for the any Line Item in the Billing?
    It's coming for other Order (Line Item for Bought out Item at Project Site - Some Item they procure at project site & complete the task).
    Where I can configure in system for all.
    Rgds
    Srivastav
    09973504950

    Hi,
    Sales text can be copied from customer to order , order to delivery and delivery to billing .
    Check the T-code : VOTXN , do the customization as per your requirement.
    check the below link :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55f993545a11d1a7020000e829fd11/content.htm

Maybe you are looking for

  • NLS CHARACTER SET 변경 방법 (ORACLE 7)

    제품 : ORACLE SERVER 작성날짜 : 2004-11-09 NLS CHARACTER SET 변경 방법 (ORACLE 7) ====================================== PURPOSE 이 자료는 Oracle RDBMS SERVER에서 NLS CHARACTER SET 변경 방법에 대한 내용을 소개한다. [ ORACLE 7 에서만 가능 ] 데이타베이스의 CHARACTER SET은 데이타 딕셔너리 테이블인 sys.prop

  • Multi-mapping with message bundling but without using BPM

    Hi all, I have a requirement to bunch specific no. of records (say 50) from source message and create separate target messages for those bunches. For example, if the source message has 120 records, then there should be three separate target messages

  • File sharing windows 7 and xp problem

    Hello All,, I am working within domain environment using windows server 2012 R2 as domain controller and my client computers are windows 7 professional and windows XP ,,, the problem is windows XP can NOT access the shared files on windows 7 computer

  • Apple TV 3rd generation tv compatibility

    Is it possible to make Apple TV 3rd generation work for a tv which only supports 480i/p or 576i/p resolution?

  • About ZEN Micro 5GB is

    To Whom It May Concern: ??Two weeks ago, I bought a Creative ZEN Micro (5GB) mp3 player from PChome online shop. After one week, the battery can not charge normally and I believe it was broken. I don?t know it cause by your company bad quality contro