How to get generic delta using timestamp field

Hi All,
i have created a generic datasource using tables vbrp,vbrk.mara,marc,knvv.. to get the sales data for planning.Here i have document created date and time.So i'm concatinating these 2 date and time fields into timestamp which is of format yyyymmddhhmmss.Finally i'm using this timestamp to extract data .
So is it the right way to pull the data using timestamp and what is the timezone i need to specify as the servers are in india only.
or any other way to proceed.
Thanks
Rao.

Hi Rao,
Delta based on timestamp based on generic datasource only works if any one of the tables contains timestamp field(not time and date fields separately).
I dont think by combining date & time fields will give you correct results.
Regarding time zone: Use SAP system time zone.
Srini

Similar Messages

Generic Delta with Timestamp Field

Dear SDN Team,
We changed one of our HR datasource from FULL to DELTA with Timestamp(TMSTMP)-Time Stamp(UTC).
Which Delta we need to take Timestamp(Local) or Timestamp(UTC)
Our Generic Datasource is based on Function Module.This data source contains HR Hours Data i.e Direct Hours & Indirect Hours.
With interval settings has
Safety Interval Upper Limit - 'Blank' .
Safety Interval Lower Limit - 1800
New status for Changed Records (Selected)
It is a HR Generic Data Source.
We are creating the records in PA30,PA40 and going to take the records from PA0000,PA0001
Delta type for this DS is "AIE" as our delta type process for our DS.
I am trying to load the INIT to Cube,but its not allowing to load,saying with 'AIE' delta type its not possible to load to cube.
I changed the delta type to 'ADD' then the safety interval limits changed to
Safety Interval Upper Limit - 1800 .
Safety Interval Lower Limit - Blank.
Additive Delta (selected)
Is it possible to load the Generic Delta Time stamp to Cube?
Please let us know what are the settings & delta type needs to be there to load the Generic Delta Timestamp to Cube.
Your suggestions are really appreciated.
Thanks and Kind Regards,
Lakshman Kumar G

Hi,
We used TMSTMP filed with Data element TZNTSTMPS with data type DEC Length 15 in Function Module & Extract Structure.
Default filed name is TIMESTAMP_UTC,Domain is TZNTSTMPS.
Generic Delta -
Filed name - TMSTMP
Timestamp (UTC) selected
With interval limits
Safety Interval Upper Limit 1800
Safety Interval Lower Limit
New Status or Changed Records selected.
Thanks and Kind Regards,
lakshman

How to get automatically sysdate in a field

How to get sysdate automatically in a field in ADF

As provided in the above blog post provided by Branislav,
use the groovy expressions for defaulting the date using the following expressions is the right & recommended approach:
Only date: adf.currentDate
Date with Time: adf.currentDateTime
see section 3.6.1 in ADF Developer's guide:
http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcintro.htm#CEGJJJBA
Thanks,
Navaneeth

How to get the workcentres used in the routing out of 2 alternate routings

Dear All,
I would like to know how to get the workcentres used in the routing out of 2 alternate routings.
I referred PLKO got the Task List Type (PLNTY), Group(PLNNR), Group Counter(PLNAL), Plant(werks).
I passed this in to PLPO, The problem in PLPO is we dont have the distinguishing field Group Counter(PLNAL), so I am getting all the ARBID including both alternates.
How to get the ARBID with respect to Groupcounter 1 alone.
If a get the ARBID , I can get the ARBPL from CRHD.

HI,
Use PLAS Table also. you have to use PLKO> PLAS> PLPO.
Pass PLNNR & PLNAL in PLAS and get PLNNR & PLNKN.
Then pass these into PLPO.
work centers from CRHD
Regards,
Krishna Mohan
Edited by: Krishna Mohan N on Jan 31, 2008 12:28 PM

How to get command history with timestamp ?

how to get command history with timestamp ?

If you are using bash:
HISTTIMEFORMAT If this variable is set and not null, its value is used as a format string for strftime(3) to print the time stamp associated with each history entry displayed by the history builtin. If this variable is set, time stamps are written to the history file so they may be preserved across shell sessions.
[SunOS 5.10/bash] [email protected]:/etc/ftpd
# HISTTIMEFORMAT="%h/%m - %H:%M:%S ";export HISTTIMEFORMAT;history
    1 Aug/08 - 19:07:52 chmod a+rwx /root
    2 Aug/08 - 19:07:52 ll /
    3 Aug/08 - 19:07:52 tail -f /root/mylog.log
    4 Aug/08 - 19:07:52 vi /usr/dt/bin/Xsession
    5 Aug/08 - 19:07:52 cat /root/mylog.log
    6 Aug/08 - 19:07:52 ls /export/home/p661210/.dt
    7 Aug/08 - 19:07:52 ls -la /export/home/p661210/.dt
    8 Aug/08 - 19:07:52 cat /export/home/p661210/.dt/errorlog
    9 Aug/08 - 19:07:52 vi /usr/dt/config/C/sys.dtwmrc
   10 Aug/08 - 19:07:52 ls
   11 Aug/08 - 19:07:52 cat Xresources.jds
   12 Aug/08 - 19:07:52 vi /usr/dt
[SunOS 5.10/bash] [email protected]:/etc/ftpd
[SunOS 5.8/bash] root@wgls03:/root
# HISTTIMEFORMAT="%h/%m - %H:%M:%S ";export HISTTIMEFORMAT;history
    1 Jul/07 - 09:02:21 vi /etc/vfstab
    2 Jul/07 - 09:02:21 mount /store
    3 Jul/07 - 09:02:21 cd /store/bnz
    4 Jul/07 - 09:02:21 ls
    5 Jul/07 - 09:02:21 ./BNZ_installBaseSoftware
    6 Jul/07 - 09:02:21 find /usr -name gunzipCheers,
Andreas

How to get multiple records using fn-bea:execute-sql()

Hi,
I created Proxy service(ALSB3.0) to get records from DB table. I have used Xquery function(fn-bea:execute-sql()). Using simple SQL query I got single record, but my table having multiple records. Please suggest how to get multiple records using fn-bea:execute-sql() and how to assign them in ALSB variable.
Regards,
Nagaraju
Edited by: user10373980 on Sep 29, 2008 6:11 AM

Hi,
Am facing the same issue stated above that I couldnt get all the records in the table that am querying in the Proxyservice.
For example:
fn-bea:execute-sql('EsbDataSource', 'student', 'select Name from StudentList' ) is the query that am using to fetch the records from the table called StudentList which contains more than one records like
Id Name
01 XXX
02 YYY
03 ZZZ
I tried to assign the result of the above query in a variable and while trying to log the variable, I can see the below
<student>
<Name>XXX</Name>
</student>
I want to have all the records from my table in xml format but it's not coming up. I get the value only from the first row of my table.
Please suggest.
regards,
Venkat

How to get google back in search field

how to get google back in search field of Safari

Safari 6
URL address bar and Google search are unified and is called Smart search field.
When you search with Google "Google search" will appear.
There is no more a separate Google search field.
Prior versions of Safari
Click the "View" menu in the Safari menu bar and select "Customize Toolbar".
From the dropdown drag the default set into the Toolbar.

How to get iccid by using imei?i had lost my iphone and i want to find it back.

how to get iccid by using imei?i had lost my iphone and i want to find it back.

Ocean20 wrote:
Not sure about ICCID but you can get your IMEI by going to the computer you normally sync to and open iTunes there click on edit then preferences then on the devices tab and then hover mouse over your backup and the IMEI and other info on your phone will appear
Interesting. Yet another of the many Easter eggs dispersed throughout the system.

How to get this output using sql query?

Hi,
How to get this output using sql query?
Sno Name Age ADD Result
1 Anil 23 delhi Pass
2 Shruti 25 bangalor Pass
3 Arun 21 delhi fail
4 Sonu 23 pune Pass
5 Roji 26 hydrabad fail
6 Anil 28 delhi pass
Output
Sno Name Age ADD Result
1 Anil 23 delhi pass
28 delhi pass

Hi Vamshi,
Your query is not pretty clear.
write the select query using Name = 'ANIL' in where condition and display the ouput using Control-break statements.
Regards,
Kannan

How to get last column used in report sorting?

hi,
how to get last column used in report sorting?
simon

How to identifiy which column was sorted having different reports on page?
just use:
'YOUR_STATIC_REGION_NAME' instead of p_static_id,
:APP_ID for p_app_id,
:APP_PAGE_ID for p_page_id
:APP_USER_ID for p_app_user.
and dont forget to grant SELECT on #OWNER# to APEX_030200.WWV_FLOW_PREFERENCES$
good luck and thank you Juergen.Schuster
Simon

How to get length of a data field

Hi Experts,
How to get length of a data field. For example data field /BIC/0COSTCENTER length is 9. and the entry in the table is /BIC/0COSTCENTER = 1000 only. How to get the lenth of value in the table.
Any help greatly appreciated. Thanks.
Best Regards,
Suresh.

Below is example code
Data: var1(10) type c value '2500',
var2 type i.
var2 = Strlen( var1 ).
write var2.
<b>Reward Points for helpful answers</b>
Satish

How to get Listener Information using PL/SQL code

How to get Listener Information using PL/SQL code

user2075318 wrote:
How to get Listener Information using PL/SQL codeThis approach (somewhat of a hack) can be used - but it does not really provide meaningful data at application layer.
SQL> create or replace function TnsPing( ipAddress varchar2, port number default 1521 ) return varchar2 is
2          type THexArray is table of varchar2(2);
3          --// tnsping packet (should be 10g and 11g listener compatible)
4          TNS_PING_PACKET constant THexArray := new THexArray(
5                  '00', '57', '00', '00', '01', '00', '00', '00',
6                  '01', '39', '01', '2C', '00', '00', '08', '00',
7                  '7F', 'FF', '7F', '08', '00', '00', '01', '00',
8                  '00', '1D', '00', '3A', '00', '00', '00', '00',
9                  '00', '00', '00', '00', '00', '00', '00', '00',
10                  '00', '00', '00', '00', '00', '00', '00', '00',
11                  '00', '00', '00', '00', '00', '00', '00', '00',
12                  '00', '00', '28', '43', '4F', '4E', '4E', '45',
13                  '43', '54', '5F', '44', '41', '54', '41', '3D',
14                  '28', '43', '4F', '4D', '4D', '41', '4E', '44',
15                  '3D', '70', '69', '6E', '67', '29', '29'
16          );
17
18          socket UTL_TCP.connection;
19          txBytes number;
20          rxBytes number;
21          rawBuf raw(1024);
22          resp    varchar2(1024);
23 begin
24          socket := UTL_TCP.open_connection(
25                          remote_host => ipAddress,
26                          remote_port => port,
27                          tx_timeout => 10
28                  );
29
30          --// convert hex array into a raw buffer
31          for i in 1..TNS_PING_PACKET.Count loop
32                  rawBuf := rawBuf || HexToRaw( TNS_PING_PACKET(i) );
33          end loop;
34
35          --// send packet
36          txBytes := UTL_TCP.write_raw( socket, rawBuf, TNS_PING_PACKET.Count );
37
38          --// read response
39          rxBytes := UTL_TCP.read_raw( socket, rawBuf, 1024 );
40
41          UTL_TCP.close_connection( socket );
42
43          --// convert response to varchar2
44          resp := UTL_RAW.Cast_To_Varchar2( rawBuf );
45
46          --// strip the header from the response and return the text only
47          return( substr(resp,13) );
48 end;
49 /
Function created.
SQL>
SQL> select tnsping( '10.251.93.30' ) as TNSPING from dual;
TNSPING
(DESCRIPTION=(TMP=)(VSNNUM=169869568)(ERR=0)(ALIAS=LISTENER))
SQL> select tnsping( '10.251.95.69' ) as TNSPING from dual;
TNSPING
(DESCRIPTION=(TMP=)(VSNNUM=0)(ERR=0)(ALIAS=LISTENER))
SQL>

How to get SharePoint Groups using Javascript in SP2013 ?

How to get SharePoint Groups using Javascript in SP2013 , not JSOM please

Here is the code that worked for me:
<script type="text/javascript">
var requestUri = _spPageContextInfo.webAbsoluteUrl + "/_api/web/sitegroups";
var requestHeaders = { "accept" : "application/json;odata=verbose" };
$.ajax({
url : requestUri,
contentType : "application/json;odata=verbose",
headers : requestHeaders,
success : onSuccess,
error : onError
function onSuccess(data, request){
var s='';
for (var i = 0; i < data.d.results.length; i++)
s +=data.d.results[i].LoginName+'\n';
alert(s);
function onError(error) {
alert("error");
</script>

Generic delta   using function module with two fields AEDAT AND ERDAT

Hi,
    i have scenario that i have to create a generic data source having delta using funcation module and the delta speci fields are AEDAT AND ERDAT . Is there possibility with out using these two fields ( i mean AEDAT AND ERDAT) in the extract structure can i create the data source . and provide sample code for me . it is very urgent.
waiting for the reply,
sri.c

Hi Sri,
here some coding, I hope this helps!
first, get the delta-field
      LOOP AT s_s_if-t_select INTO l_s_select.
        CASE l_s_select-fieldnm.
          WHEN 'ZDATE'.
            MOVE-CORRESPONDING l_s_select TO r_date.
            IF r_date-high IS INITIAL OR r_date-high = space.
              r_date-high = '9991231'.
            ENDIF.
            APPEND r_date.
        ENDCASE.
      ENDLOOP.
Cursor öffnen
      OPEN CURSOR WITH HOLD s_cursor FOR
      SELECT * FROM
      WHERE ....
      AND    erdat in r_date
      AND    aedat IN r_date.
      FETCH NEXT CURSOR s_cursor INTO CORRESPONDING FIELDS OF table e_t_data package size s_s_if-maxsize.
regards
Siggi
PS: Note that this coding only works for a very straight forward extraction.
Message was edited by: Siegfried Szameitat

How does the Generic Delta Works

Hi All,
Please let me know how the different types of Generic Delta works i.e. Numeric Pointer, 0Calday and Timestamp with one simple example for each.
Thanks & Regards,
Sunny

Hi........
There are three options for the type of the field determining the delta in a DataSource:
1. Time stamp - The field is a DEC15 field which always contains the time stamp of the last change to a record in the local time format.
2. Calendar day - The field is a DATS8 field which always contains the day of the last change.
3. Numerical pointer - The field contains another numerical pointer that appears with each new record.
Safety Interval Upper Limit of Delta Selection
This field is used by DataSources that determine their delta generically using a repetitively-increasing field in the extract structure.
The field contains the discrepancy between the current maximum when the delta or delta init extraction took place and the data that has actually been read.
Leaving the value blank increases the risk that the system could not extract records arising during extraction.
Example: A time stamp is used to determine the delta. The time stamp that was last read is 12:00:00. The next delta extraction begins at 12:30:00. In this case, the selection interval is 12:00:00 to 12:30:00. At the end of extraction, the pointer is set to 12:30:00.
A record - for example, a document- is created at 12:25 but not saved until 12:35. It is not contained in the extracted data but, because of its time stamp, is not extracted the next time either.
For this reason, the safety margin between read and transferred data must always be larger than the maximum length of time that it takes to create a record for this DataSource (with a time stamp delta), or it must display an interval that is sufficiently large (for determining delta using a serial number).
Safety Interval Lower Limit
This field contains the value taken from the highest value of the previous delta extraction to determine the lowest value of the time stamp for the next delta extraction.
For example: A time stamp is used to determine a delta. The extracted data is master data: The system only transfers after-images that overwrite the status in the BW. Therefore, a record can be extracted into the BW for such data without any problems.
Taking this into account, the current time stamp can always be used as the upper limit when extracting: The lower limit of the next extraction is not seamlessly joined to the upper limit of the last extraction. Instead, its value is the same as this upper limit minus a safety margin. This safety margin needs to be big enough to contain all values in the extraction which already had a time stamp when the last extraction was carried out but which were not read. Not surprisingly, records can be transferred twice. However, for the reasons above, this is unavoidable.
Extracted Data Delta Type
The system uses the delta type to determine how extracted data is to be interpreted in BW, and into which data targets it can be posted.
A distinction is made between the following:
1. Additive delta
The key figures for extracted data are added up in BW. DataSources with this delta type can supply data to ODS objects and InfoCubes.
2. New status for changed records
Each record to be loaded delivers the new status for the key figures and characteristics. DataSources with this delta type can write to ODS objects or master data tables.
Check this link :
http://help.sap.com/saphelp_nw2004s/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
generic delta
Hope this helps you..........
Regards,
Debjani.............

How to get generic delta using timestamp field

Similar Messages

Maybe you are looking for