How to get id of selected Tab in WebDynpro abap

HI,
How to get id of selected Tab in WebDynpro for abap? THANKS!

Hi,
In the action method for onSelect try using,
DATA:
    lv_select_tab type string.          "Selected tab value
DATA:
    lt_events type WDR_EVENT_PARAMETER_LIST,
    ls_events type WDR_EVENT_PARAMETER.
field-symbols: <fs_value> type any.   "Attribute value in events table
lt_events = wdevent->parameters.
read table lt_events into ls_events with key name = 'TABSTRIPID'.
if sy-subrc eq 0.
    assign ls_events-value->* to <fs_value>.
    if sy-subrc eq 0.
      lv_select_tab = <fs_value>.                    "Tab selected
    endif.
endif.
Hope it helps!
Regards,
Radhika,

Similar Messages

How to get the previoulsy selected value in a combobox

How to get the previoulsy selected value in a combobox. i WANT the current and the previously selected value of the combobox.

Just add to combobox ItemListener. When item is changing in itemStateChanged arrives 2 events. ItemEvent.DESELECTED and ItemEvent.SELECTED with corresponding item's values. Just write something like this:
        comboBox.addItemListener(new ItemListener() {
            Object prevValue;
            public void itemStateChanged(ItemEvent e) {
                if (e.getStateChange() == ItemEvent.SELECTED) {
                    //do what you need with prevValue here
                } else {
                    prevValue = e.getItem();
        });

How to get the old selection in ListSelectionListener valueChanged() method

Hi,
Is anyone know how to get the old selection index/value in the ListSelectionListener valueChanged() method? The list.selectedValue() always return the same value which is the new selection. The ListSelectionEvent.getFirstIndex() and getLastIndex are always firstIndex <= lastIndex so that you cant' tell which one is the old selection.
Please help and thanks!

Just test the two indexes (first and last): if the corresponding row is selected, then the other is unselected. That gives you the old (unselected) and new (selected) item.
Of course, I have supposed that you were using a SINGLE_SELECTION model...
Hope this helped,
Regards.

How to get the default selection color from JTable

Hi, there,
I have a question for how to get the default selection color from JTable. I am currently implementing the customized table cell renderer, but I do want to set the selection color in the table exactly the same of default table cell renderer. The JTable.getSelectionBackgroup() did not works for me, it returned dark blue which made the text in the table unreadable. Anyone know how to get the window's default selection color?
Thanks,
-Jenny

The windows default selection color is dark blue. Try selecting any text on this page. The difference is that the text gets changed to a white font so you can actually see the text.
If you don't like the default colors that Java uses then use the UIManager to change the defaults. The following program shows all the properties controlled by the UIManager:
http://www.discoverteenergy.com/files/ShowUIDefaults.java
Any of the properties can be changed for the entire application by using:
UIManager.put( "propertyName", value );

How to get back "Bookmark All Tabs" in menu ? Please if you don't want it (still quite some ppl want because it's usefull), at least allow to get it back trough Preferences (or at least about:config)

How to get back "Bookmark All Tabs" in menu ? Please if you don't want it (still quite some ppl want because it's usefull), at least allow to get it back trough Preferences (or at least about:config)

Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or other menus like the Edit menu (Alt+E) and Bookmarks menu (Alt+B) and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
* "Bookmark All Tabs" (Shift+Ctrl+D) no longer shows in the Bookmarks menu unless you open the Bookmarks menu via the keyboard (Alt + B).
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
See also:
* [[/questions/799856#answer-155765]]
* Bookmark All: https://addons.mozilla.org/firefox/addon/bookmark-all/

Default Values for Select-options In Webdynpro-ABAP

Hi Freinds,
Kindly,Help me in setting the Default values for the Select-options in Webdynpro ABAP.
Here the Node and the Attributes are Created Dynamically, and then Displayed Select-options Component View.
Regards,
Xavier.P

Xavier Reddy Penta sent me this question via email and I answered it directly yesterday. Here is the solution that I provided to him, so that it is stored with the original question:
I believe your problem is that you are not setting the value into the range correctly. You are setting it directly into the field symbol of the range like such:
<FS> = L_STRING2.
But ranges are deep objects. They have four fields: Sign, Option, High, and Low. This is from the online help:
1.     sign of type c and length 1. The content of sign determines for every row whether the result of the condition formulated in the column is included or excluded in the entire resulting set for all rows. Evaluable values are "I" for include and "E" for exclude.
2.     option of type c and length 2. option contains the selection option for the condition of the row in form of logical operators. Analyzable operators are "EQ", "NE", "GE", "GT", "LE", "LT", "CP" and "NP" if column high is initial, and "BT", "NB" if column high is not initial. With the options "CP" and "NP", the data type of the columns low and high must be of the data type c, and special rules apply for entries on the selection screen.
3.     low of the data type defined after FOR. This column is designated for the comparison value or the lower interval limitation.
4.     high of the data type defined after FOR. This column is designated for the upper interval limitation.
So when you are moving the value into the field symbol you are setting it into the sign column.
Here is an example of how you can access the components of the range:
* create a range table that consists of this new data element
    lt_range_table =
      wd_this->lv_sel_handler->create_range_table(
           i_typename = l_typename ).
    IF l_fieldname = 'CARRID'.
      FIELD-SYMBOLS: <tab>         TYPE INDEX TABLE,
                         <struct>      TYPE ANY,
                         <wa>          TYPE ANY,
                         <option>      TYPE char2,
                         <sign>        TYPE char1,
                         <high>        TYPE ANY,
                         <low>         TYPE ANY,
                         <wa_values>   TYPE ANY.
      ASSIGN lt_range_table->* TO <tab>.
      APPEND INITIAL LINE TO <tab> ASSIGNING <wa>.
      ASSIGN COMPONENT 'OPTION' OF STRUCTURE <wa> TO <option>.
      ASSIGN COMPONENT 'HIGH' OF STRUCTURE <wa> TO <high>.
      ASSIGN COMPONENT 'LOW' OF STRUCTURE <wa> TO <low>.
      ASSIGN COMPONENT 'SIGN' OF STRUCTURE <wa> TO <sign>.
      <sign> = 'I'.
      <option> = 'EQ'.
      <low> = 'AA'.
    ENDIF.

Parameters in selection screnn in webdynpro abap

Hello Gurus,
We have a requirement to maintain parameters in selection screnn in webdynpro abap.
now we are able to create parameters using wdr_select_options componet usage of method add_parameter_field.
we need f4 help also for this parameter.
how can we pass exporting parameters to this method.
Could anyone please suggest solutions?
and if possible send me the sample code for this requirement.
Thanks in Advance for your replies.
Regards,
Babu

Hi Rajsekhar,
this is sample code of select option for carr id field. so you can guess and change according to your requirement.
Observe the highlited code in below coding.
nOTE: S_CARR_ID IS THE DATA ELEMENT OF CARR ID FIELD, FOR THAT I AM APPLYING SELECT OPTIONS IN BELOW CODING.
WRITE THE BELOW CODE IN WDDOINT( ) METHOD OF REQUIRED VIEW
Data: lt_range_table type ref to data,
     read_only type abap_bool.
WD_THIS->M_WD_SELECT_OPTIONS = WD_THIS->WD_CPIFC_SELECT_OPTIONS( ).
WD_THIS->M_HANDLER = WD_THIS->M_WD_SELECT_OPTIONS->INIT_SELECT_SCREEN( ).
WD_THIS->M_HANDLER->SET_GLOBAL_OPTIONS(
     I_DISPLAY_BTN_CANCEL = ABAP_FALSE
     I_DISPLAY_BTN_CHECK = ABAP_FALSE
     I_DISPLAY_BTN_RESET = ABAP_FALSE
     I_DISPLAY_BTN_EXECUTE = ABAP_FALSE ).
LT_RANGE_TABLE = WD_THIS->M_HANDLER->CREATE_RANGE_TABLE( I_TYPENAME = 'S_CARR_ID' ).
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD(
*          I_ID = 'S_CARR_ID'*
*          IT_RESULT = LT_RANGE_TABLE*
*          I_READ_ONLY = READ_ONLY* ).
BELOW CODE IN REQUIRED ACTION( SAY IN SOME BUTTON ACTION WHICH WILL RETRIEVE THE DATA FROM DATABASE TABLE USING SELECTI OPTIONS VALUES)
fIRST THE GET REFERENCE TO NODE( CTRL F7->READ CONTEXTB-FLIGHT NODE )
***THEN BELOW CODE
DATA: RT_CARRID TYPE REF TO DATA.
DATA:IS_FLIGHT TYPE TABLE OF SFLIGHT.
FIELD_SYMBOLS: <FS_CARRID> TYPE TABLE.
RT_CARRID = WD_THIS-> M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
ASSIGN RT_CARRID->* TO <FS_CARRID>.
SELECT * INTO CORRRESPONDING FIELDS OF TABLE IS_FLIGHT
   FROM SFLIGHT WHERE CARRID IN <FS_CARRID>
NODE_FLIGHT->BIND_TABLE( IS_FLIGHT ).

Saving Selection Screens in Webdynpro Abap

Hi ,
Could you please throw some light on how to save the selection screens in Webdynpro Abap ?? Just like variants in normal Abap?
Thanks and Regards
Alok Sharma

HI,
I dont think there is automatic saving of varients in web dynpros just like normal selection-screen.
Just check this link you might get some idea.
Link[Save Varient|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f028c2b9-1730-2d10-71ae-ce300ea00573?quicklink=index&overridelayout=true]
Regards and Best wishes.

How to create a table to use in webdynpro ABAP

Hi Guys,
Can anybody let me know how to create a table to use in webdynpro ABAP. I am new to ABAP. It would appreciable if i get useful answer. Thanks In Advance
Regards
Ravi

Hi! You can use transaction code SE11. Please refer to http://help.sap.com/saphelp_nw70/helpdata/en/6c/f2934259a5c66ae10000000a155106/frameset.htm
Please note that table name should start with 'Y' or 'Z' - by SAP naming conventions object names starting with 'Y' and 'Z' are reserved for customer application development.
Please reward points if helpful

Select-options in Webdynpro abap

Hi,
I want to use select options in webdynpro abap ,I checked links available in net but want a simple step by step procedure .
-Sandeep

Hi,
What do you mean by simple steps? You need to write little code to add select options in WDA. You can check this wiki for reference: Web Dynpro ABAP - Complex select-options component usages - Code Gallery - SCN Wiki
And there are lot more documents available in SCN. search here
Regards,
Kiran

ECC6.0 t-code COOIS - how to get the "Profile" select-option list

Hi PP Gurus
We are implementing ECC6.0
We upgraded one of the systems from 4.7 to ECC6.0 (and also kept data: documents, users profiles, variants,u2026etc).
My question is regarding standard transaction COOIS.
I do comparison in current 4.7 and ECC6.0 systems (I have SAP_ALL and SAP_NEW in both systems).
The thing is that in our ECC6.0 system the transaction COOIS doesnu2019t display Profile on select-options screen.
There are only the following items (select-option screen of COOIS in ECC6.0):
-LIST
-LAYOUT
-Prod.orders checkbox
-Planned orders checkbox
u2026And u2018Selectionu2019 tab with other fields
In the current Enterprise 4.7 system the transaction COOIS displays the following select-option screen:
-LIST
-PROFILE
-LAYOUT
-Prod.orders checkbox
-Planned orders checkbox
u2026And u2018Selectionu2019 tab with other fields
Questions:
1.     Is that possible to maintain / see and select a PROFILE in COOIS of ECC6 (or due to new functionality it no more available on that screen ?) How to do that?
2.     Looking at layouts (I ran COOIS in two systems and compared the results) I canu2019s see in ECC6.0 some icons like u2018Refreshu2019, u2018Order logu2019, u2018Display order componentsu2019, u2018Long textu2019 , u2026.) But all of them are in 4.7 layout. How to get them in ECC6.0 ?
What I have already explored:
u2022     ECC6.0 has a new config. t-code COISN (4.7 has only COIS) . I created my new overall profile there, set my own layout, but running COOIS still canu2019t see/use the PROFILE;
u2022     I have compared the standard structure PPIO_ENTRY_SC1100 in 4.7 and ECC6.0 and found the new component COIS_LISTTYP in ECC6.0. In this situation I ran a new t-code u201CDefine New List Typesu201D (it doesnu2019t exist in 4.7) and created my new entry, but still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
u2022     I also tried situation when both config. transaction COIS (in 4.7 and ECC6.0) had the SAME overall profiles u2013 still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
u2022     I found a new icon u201CNavigation profileu201D in result layout of COOIS ECC6.0 Is that right place where I can maintain the icons I need (see my second question) ?
THANK YOU.

Hi,
The reports are modified if am right as of ECC 5.0. Refer to note - 747469 which gives a list of all reports modified.
If am right by profile you mean navigation profile, this is now in the display screen. The content remains, only thing is the layout is modified & more structured. So i would suggest you to have a look around in COOIS report & you will find the info.
The navigation profile is adjacent to the icon called Environment (its a drop down list).
Revert if you face any issues.
Regards,
Vivek

JTree: How to get the currently selected node

How do I get the currently selected node in JTree?
getLastSelectedPathComponent() this method always return the last selected node and not the current one.
Thanks in advance
Sachin

Use
TreePath selectedPath = tree.getSelectionPath()If your tree allows multiple selections, use
TreePath [] selectedPaths = tree.getSelectionPaths() this will return an array of all selected tree paths.
Once you get the tree path, call the treePath.getLastPathComponent(). this should tell you the currently selected node.
Hope this helps
Sai Pullabhotla

VS2013 / Team Explorer vsix - How to get the currently selected build definition?

Greetings,
My goal with a simple extension is to right-click any build definition and if my "Show Build Def Stats" menu item is selected, pop a message box with some summary details I plan to pull from the IBuildDefinition interface.
I'm missing something fundamental I'm sure, but I cannot figure out how in the menu handler the actual build definition that I clicked on.
The menu command is added where I want it successfully:
Symbol info used to get this there:

<GuidSymbol name="guidTeamExplorerBuildDefContextMenu" value="{34586048-8400-472E-BBBF-3AE30AF8046E}" >
<IDSymbol name="menuBuildDefinitionContext" value="0x109"/>
</GuidSymbol>
I am stumped as to how to get the fact that I clicked the "ISRepository" build definition in either the Initialize() or MenuItemCallBack() methods, I haven't come across the right service or container object that I recognize.
Much obliged!
--Jordan

I have been investigating this for a while using .NET Reflector and finally I got it:
In VS 2013, add references to the following assemblies in the folder C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer:
Microsoft.TeamFoundation.Controls.dll
Microsoft.TeamFoundation.Build.Controls.dl
And then use this code:
Microsoft.TeamFoundation.Controls.ITeamExplorer teamExplorer;
Microsoft.TeamFoundation.Controls.ITeamExplorerPage teamExplorerPage;
Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt buildsPageExt;
teamExplorer = base.GetService(typeof(Microsoft.TeamFoundation.Controls.ITeamExplorer)) as Microsoft.TeamFoundation.Controls.ITeamExplorer;
teamExplorerPage = teamExplorer.CurrentPage;
buildsPageExt = teamExplorerPage.GetExtensibilityService(typeof(Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt)) as Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt;
foreach (Microsoft.TeamFoundation.Build.Controls.Extensibility.IDefinitionModel definitionModel in buildsPageExt.SelectedDefinitions)
System.Windows.Forms.MessageBox.Show(definitionModel.Name);
* My new blog about VSX: http://www.visualstudioextensibility.com * Twitter: https://twitter.com/VSExtensibility * MZ-Tools productivity extension for Visual Studio: http://www.mztools.com.

How to get result of Select from stored function.

I need to get result of select from a stored function.
In the end of my stored function I makes final select (four columns).
How it can be retrived from function?

Hi,
A function can only return one value, but it sounds like you want to return 4 values.
The one value that you return can be a record, with many columns, such as a ROWTYPE, or a TYPE that you define.
You can return an XMLTYPE that has whatever elements you want.
You can write a procedure that has several OUT parameters. (You can have OUT parameters in a function, but a lot of people find that confusing.)
In very special circumstance, you might consider returning a string that is a delimited list of values, such as '7639,SMITH,,17-DEC-1980'.
Someoneelse has a good point.
We could give a better answer if you ask a specific question, like:
"I have this table ...
I want a function such that, if I call it with these parameters ... I get ...
but if I call it like this ... then I get ..."

How to get name of selected image?

Hello ,
I want the name of selected image.I have PDEImage and PDEElement of selected image.
How to get the name of selected image?is it possible to get name of image on document?
please,help me.

That information is not required to be stored in the PDF. It present, it could be present in the XMP-based metadata of the image.
Consult ISO 32000-1, ISO 16684-1 and the XMP specification for details.

How to get id of selected Tab in WebDynpro abap

Similar Messages

Maybe you are looking for