How to get lync Status using VBScript
Hello,
I have some application that uses VBScrit, and Microsoft Lync running in my PC. I'm trying to get Lync Status of any contact. Could someone help me?
For get Lync status using VBScript, you can check below link
http://social.msdn.microsoft.com/Forums/lync/en-US/0d4a11ec-9a4d-4cb1-b292-f9831af16b3d/how-to-use-the-communicatorapi-in-vbscript?forum=communicatorsdk
I recommended to ask this question in Lync Development forum
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali
Similar Messages
-
How to get system status and user status of service order
Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh BathlaHi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu -
How to get system status and user status ?
how to get system status and user status for the given production order?
In which PP table we can
find these?
Thanks&Regards
SatishHi Ram,
Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
Alternatively, the following tables store the user and system status info:
JSTO- Status object information
JEST- Individual Object Status
Hope this helps.
Let me know if u need further information.
Regards,
Sonal -
How to get invoice status columns available in invoice general screen
Dear All,
How to get invoice status in oracle invoices
Invoice Status --> Validated, Never Validated, Cancelled etc
please advice me.
Thanks
Rehan
Edited by: 877432 on Oct 9, 2012 3:52 AMfor
>
which is not giving this function kindly where i find these status.
>
re-read
>
plz see http://www.shareoracleapps.com/2010/10/api-to-find-ap-invoice-status.html
also Where Is The Invoice Validation Status Stored? How Is The Invoice Validation Status Determined? [ID 301806.1]
>
those notes point about statuses - 'Validated' , 'Never Validated' , 'Needs Revalidation'
if you want 'Unpaid' , 'Fully Applied','Available' etc instead of 'UNPAID', 'FULL', 'AVAILABLE' etc you can use lookups
see note in http://andyblg.wordpress.com/2012/10/09/approval-status-for-invoice-in-r12/ -
How to get multiple records using fn-bea:execute-sql()
Hi,
I created Proxy service(ALSB3.0) to get records from DB table. I have used Xquery function(fn-bea:execute-sql()). Using simple SQL query I got single record, but my table having multiple records. Please suggest how to get multiple records using fn-bea:execute-sql() and how to assign them in ALSB variable.
Regards,
Nagaraju
Edited by: user10373980 on Sep 29, 2008 6:11 AMHi,
Am facing the same issue stated above that I couldnt get all the records in the table that am querying in the Proxyservice.
For example:
fn-bea:execute-sql('EsbDataSource', 'student', 'select Name from StudentList' ) is the query that am using to fetch the records from the table called StudentList which contains more than one records like
Id Name
01 XXX
02 YYY
03 ZZZ
I tried to assign the result of the above query in a variable and while trying to log the variable, I can see the below
<student>
<Name>XXX</Name>
</student>
I want to have all the records from my table in xml format but it's not coming up. I get the value only from the first row of my table.
Please suggest.
regards,
Venkat -
How to get iccid by using imei?i had lost my iphone and i want to find it back.
how to get iccid by using imei?i had lost my iphone and i want to find it back.
Ocean20 wrote:
Not sure about ICCID but you can get your IMEI by going to the computer you normally sync to and open iTunes there click on edit then preferences then on the devices tab and then hover mouse over your backup and the IMEI and other info on your phone will appear
Interesting. Yet another of the many Easter eggs dispersed throughout the system. -
How to get the workcentres used in the routing out of 2 alternate routings
Dear All,
I would like to know how to get the workcentres used in the routing out of 2 alternate routings.
I referred PLKO got the Task List Type (PLNTY), Group(PLNNR), Group Counter(PLNAL), Plant(werks).
I passed this in to PLPO, The problem in PLPO is we dont have the distinguishing field Group Counter(PLNAL), so I am getting all the ARBID including both alternates.
How to get the ARBID with respect to Groupcounter 1 alone.
If a get the ARBID , I can get the ARBPL from CRHD.HI,
Use PLAS Table also. you have to use PLKO> PLAS> PLPO.
Pass PLNNR & PLNAL in PLAS and get PLNNR & PLNKN.
Then pass these into PLPO.
work centers from CRHD
Regards,
Krishna Mohan
Edited by: Krishna Mohan N on Jan 31, 2008 12:28 PM -
How to get the status of service in rac
Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME TYPE VALUE
service_names string DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.user7244870 wrote:
Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME TYPE VALUE
service_names string DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.
Internal services cannot be managed with srvctl utility. Check if you have any user defined service in dba_services
SQL> desc dba_services
Name Null? Type
SERVICE_ID NUMBER
NAME VARCHAR2(64)
NAME_HASH NUMBER
NETWORK_NAME VARCHAR2(512)
CREATION_DATE DATE
CREATION_DATE_HASH NUMBER
FAILOVER_METHOD VARCHAR2(64)
FAILOVER_TYPE VARCHAR2(64)
FAILOVER_RETRIES NUMBER(10)
FAILOVER_DELAY NUMBER(10)
MIN_CARDINALITY NUMBER
MAX_CARDINALITY NUMBER
GOAL VARCHAR2(12)
DTP VARCHAR2(1)
ENABLED VARCHAR2(3)
AQ_HA_NOTIFICATIONS VARCHAR2(3)
CLB_GOAL VARCHAR2(5)http://docs.oracle.com/cd/B19306_01/rac.102/b14197/srvctladmin.htm -
How to get Invoice status value in oracle payable
Hi guys,
I am new in oracle apps plz tell me how to get invoice status value of prepayment invoice type in payable.
Navigation ->Payables->Oracle Payables ->Invoices->Inquiry->Invoices ->go to Invoice status block and open to Status LOV
plz provide me sql query to find those status lov values and accounted values for any supplier & invoice num.
it's urgent plz .......................
Thanks guys.......The invoice approval status does not come from any table / lookup.
Instead, Oracle builds it by calling the ap_invoices_pkg.get_approval_status function.
You can also call it by passing invoice_id, payment_status_flag and invoice_type_lookup_code.
All these 4 columns are present on the ap_invoices_all record.
Hope this helps
Sandeep Gandhi
Independent Consultant -
How to get this output using sql query?
Hi,
How to get this output using sql query?
Sno Name Age ADD Result
1 Anil 23 delhi Pass
2 Shruti 25 bangalor Pass
3 Arun 21 delhi fail
4 Sonu 23 pune Pass
5 Roji 26 hydrabad fail
6 Anil 28 delhi pass
Output
Sno Name Age ADD Result
1 Anil 23 delhi pass
28 delhi passHi Vamshi,
Your query is not pretty clear.
write the select query using Name = 'ANIL' in where condition and display the ouput using Control-break statements.
Regards,
Kannan -
How to get last column used in report sorting?
hi,
how to get last column used in report sorting?
simonHow to identifiy which column was sorted having different reports on page?
just use:
'YOUR_STATIC_REGION_NAME' instead of p_static_id,
:APP_ID for p_app_id,
:APP_PAGE_ID for p_page_id
:APP_USER_ID for p_app_user.
and dont forget to grant SELECT on #OWNER# to APEX_030200.WWV_FLOW_PREFERENCES$
good luck and thank you Juergen.Schuster
Simon -
How to get System status Check Boxes into Query selection screen
Dear experts,
Pleas help in knowing how to get System status Check Boxes into quick view query (SQVI), selectionscreen.
Regards
Jogeswara Rao
Edited by: K Jogeswara Rao on Jul 6, 2010 7:26 PMProblem solved through other Forum
(Checkboxes not possible, some alternative solution to my requirement found) -
How to get Listener Information using PL/SQL code
How to get Listener Information using PL/SQL code
user2075318 wrote:
How to get Listener Information using PL/SQL codeThis approach (somewhat of a hack) can be used - but it does not really provide meaningful data at application layer.
SQL> create or replace function TnsPing( ipAddress varchar2, port number default 1521 ) return varchar2 is
2 type THexArray is table of varchar2(2);
3 --// tnsping packet (should be 10g and 11g listener compatible)
4 TNS_PING_PACKET constant THexArray := new THexArray(
5 '00', '57', '00', '00', '01', '00', '00', '00',
6 '01', '39', '01', '2C', '00', '00', '08', '00',
7 '7F', 'FF', '7F', '08', '00', '00', '01', '00',
8 '00', '1D', '00', '3A', '00', '00', '00', '00',
9 '00', '00', '00', '00', '00', '00', '00', '00',
10 '00', '00', '00', '00', '00', '00', '00', '00',
11 '00', '00', '00', '00', '00', '00', '00', '00',
12 '00', '00', '28', '43', '4F', '4E', '4E', '45',
13 '43', '54', '5F', '44', '41', '54', '41', '3D',
14 '28', '43', '4F', '4D', '4D', '41', '4E', '44',
15 '3D', '70', '69', '6E', '67', '29', '29'
16 );
17
18 socket UTL_TCP.connection;
19 txBytes number;
20 rxBytes number;
21 rawBuf raw(1024);
22 resp varchar2(1024);
23 begin
24 socket := UTL_TCP.open_connection(
25 remote_host => ipAddress,
26 remote_port => port,
27 tx_timeout => 10
28 );
29
30 --// convert hex array into a raw buffer
31 for i in 1..TNS_PING_PACKET.Count loop
32 rawBuf := rawBuf || HexToRaw( TNS_PING_PACKET(i) );
33 end loop;
34
35 --// send packet
36 txBytes := UTL_TCP.write_raw( socket, rawBuf, TNS_PING_PACKET.Count );
37
38 --// read response
39 rxBytes := UTL_TCP.read_raw( socket, rawBuf, 1024 );
40
41 UTL_TCP.close_connection( socket );
42
43 --// convert response to varchar2
44 resp := UTL_RAW.Cast_To_Varchar2( rawBuf );
45
46 --// strip the header from the response and return the text only
47 return( substr(resp,13) );
48 end;
49 /
Function created.
SQL>
SQL> select tnsping( '10.251.93.30' ) as TNSPING from dual;
TNSPING
(DESCRIPTION=(TMP=)(VSNNUM=169869568)(ERR=0)(ALIAS=LISTENER))
SQL> select tnsping( '10.251.95.69' ) as TNSPING from dual;
TNSPING
(DESCRIPTION=(TMP=)(VSNNUM=0)(ERR=0)(ALIAS=LISTENER))
SQL> -
How to get SharePoint Groups using Javascript in SP2013 ?
How to get SharePoint Groups using Javascript in SP2013 , not JSOM please
Here is the code that worked for me:
<script type="text/javascript">
var requestUri = _spPageContextInfo.webAbsoluteUrl + "/_api/web/sitegroups";
var requestHeaders = { "accept" : "application/json;odata=verbose" };
$.ajax({
url : requestUri,
contentType : "application/json;odata=verbose",
headers : requestHeaders,
success : onSuccess,
error : onError
function onSuccess(data, request){
var s='';
for (var i = 0; i < data.d.results.length; i++)
s +=data.d.results[i].LoginName+'\n';
alert(s);
function onError(error) {
alert("error");
</script> -
How to get acknowledgement status for PO
Hi!
I would like to write a program which gets the acknowledgement status from IDoc Processing for a given purchase order number.
How can I do that? In which table can I find the link between IDoc and PO? How to get the status?
Thanks in advance
ChristianEDIDS -- table
Check in the below link to update the staus and find the application objectof an idoc
http://www.sapgenie.com/sapedi/idoc_abap.htm#Getting%20IDocs%20linked%20to%20Application%20documents
Maybe you are looking for
-
Currently running macbook pro 2.4Ghz intel core i7 15'' Late 2011. Wanted to know if and how so (if so), 1. can i install a SSD? 2. can i upgrade (install new) usb 3 hardware to replace current USB2.0?
-
How to open image added to Pages doc in Preview app?
Hello, Anyone know hot to open images added to Pages in preview app on Mac? When I click on any image with right mouse button I have in menu these options - "Open in Pixelmator and Capture selection from screen". I tried to make my own Automator serv
-
Bapi BAPI_ACC_INVOICE_RECEIPT_POST
Hi, I want to be able to use the bapi with tax. I have the following code which gives me the result: E FF 747 Tax amount must not be greater than the tax base. Its not clear to me what i do wrong when filling the tables for the bapi. Any help will be
-
I cannot add a printer. It is not listed under default, and does not allow me to a add printer.
-
Libros y Audiolibros en Español--cannot upgrade, and cannot purchase audiobooks.
Two major problems with this App. One, I cannot successfully purchase an audiobook through the app. I can download a free text-only book, but there are no free audiobooks that I've found. When I try to purchase an audiobook, it goes through the Black