How to get messageID in BPM

Hi all,
I am working on IDOC to JMS scenario . Here In Mapping I have to map the messsageID to one target field . I am using one UDF
[ java.util.Map param = container.getTransformationParameters();
String MSGID = (String) param.get (StreamTransformationConstants.MESSAGE_ID);
return MSGID; ]
and easliy achiving it . But the problem occurs if i have to collect mutiple IDOC ,for that I am using time base BPM and easily collectig the IDOC but the MessageID value is coming as NULL.
I have to mandatory provide one messageID value to my JMS target . Is it possible to get messageID when I am collectimg more than one message OR can I got any other unique vale insted of my messageID like correlation value or any other unique value ???
Regards,
Saurabh Sharma

Wow... I still remember this problem... It is still fresh as it it were yesterday... I thought SAP would have resolved it by now....
Message id in BPM
Re: Retrieving a message id
Here is the workaround solution for that...
https://wiki.sdn.sap.com/wiki/display/XI/IntegrationProcess%28ccBPM%29inXI
BPM cannot fill the container variable like MessageId so how can we populate it..see the below blog to achieve this..
How to retrieve MESSAGE_ID from a BPM : /people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
-Siva Maranani

Similar Messages

How to get Messageid in Inbound ABAP Proxy ?

Hi,
Please advise how to get messageid in Inbound ABAP Proxy, so far i could not find anythings most of the forum discuss about "How to get messageid for Outbound Proxy).
Thank You and Best Regards
FL

Hi Fernad,
By using below code you can take message id.
java.util.Map map = container.getTransformationParameters();
return ((String) map.get(StreamTransformationConstants.MESSAGE_ID));
Create one simple UDF by using above code and map this to one field (you may create one dummy field for this). Then at runtime the mapped field contains the message id.
Regards,
Venkata Ramesh

How to get current task ID in BPM

Hi guys,
I have a requirement where I need to get the current active UWL task id in BPM context. I have seen the following code to create a direct execution url for a BPM task.
// begin session
 IUWLSession uwlSession;
 uwlSession = uwlService.beginSession(uwlContext, sessionIdleTimeout);
 uwlContext.setSession(uwlSession);
 IUWLItemManager itemManager = uwlService.getItemManager(uwlContext);
 QueryResult result = itemManager.getItems(uwlContext, null, null);
 ItemCollection items = result.getItems();
 Item item = null;
 for (int i = 0; i < items.size(); i++) {
 item = items.get(i);
 Map params = new HashMap();
 params.put("taskId", item.getExternalId());
 String executionURL = WDURLGenerator.getApplicationURL("sap.com/tc~bpem~wdui~taskinstance", "ATaskExecution", params);
This works fine, but this is looping through all the tasks assigned to a user. How do I get the current task ID. I want to use the code inside webdynpro application which is caled as a human activity in BPM. When this WebDynpro application is called I would like to know the current task ID.
As an FYI , UWL configuration passes the current task ID as a Dynamic parameter to "sap.com/tcbpemwdui~taskinstance"
application.
Please help if someone can identify how to get this value in my custom WD.
Thanks,
Yomesh.

Yes. there is no API to get the current task.
Try this:
WDProtocolAdapter.getProtocolAdapter().getRequestObject().getParameter("wi_id");
But i still say a bit confused with your requirement.
The task id gets created only upon creation of a task. And you want this current task id in the BPM Process context? How is it possible unless and until some action takes place and the data is passed from WDJ to BPM Context?
Please clear my doubt.

How to get the papi wsdl of Oracle BPM Studio

How to get the papi wsdl of Oracle BPM Studio. What is the url of the papi wsdl of Oracle BPM Studio

Thanks to Lovin:
There is an icon in the studio when the engine starts.. called as "Launch Deployed Webservice webapp"
Also.. Need to go to Engine Preferences -> Engine -> Advanced Tab -> Startup and select Start PAPI Web Services.
Default URL:http://localhost:8585/papiws/PapiWebServiceEndpoint?wsdl

New to BPM: How to get the tasks in the Workspace

Hi,
I am new to the BPM and following the book 'Getting_Started_with_Oracle_BPM_Suite_11gR1' and able to follow till the chapter 10.
I deployed the SaleQuoteLab application to the soa_server and able to login to the BPM workspace. But I am not seeing any tasks (orders) in the workspace. I've loaded the data to my local db. How can I see the BPM tasks in the workspace.
Please guide me to get the knowledge in BPM.
Thanks,
Sree

Hi Ravi,
Thanks for providing the info. I tried implementing the Hello World example. But when I deploy the application, I am not seeing the HelloWorld Application link in the BPM workspace.
In the Deployment & testing section of the Helloworld example, it was mentioned as
Instantiate the process by clicking the HelloWorldProcess v1.0 link under Applications in the Tasks tab on the left side of the window.
Note: If the HelloWorldProcess v1.0 link does not appear in the Applications panel on the Tasks tab, click the Process Tracking tab. It should appear there. You can instantiate the process from that tab.
But I am not seeing the HelloWorldProcess either in Tasks or in Process Tracking tab.
My deployment logs:
31:58 AM] Running dependency analysis...
[11:31:58 AM] Building...
[11:32:03 AM] Deploying profile...
[11:32:04 AM] Wrote Archive Module to C:\BPMSamples\HelloWorld_OBE\HelloWorldProject\deploy\sca_HelloWorldProject_rev1.0.jar
[11:32:04 AM] Running dependency analysis...
[11:32:04 AM] Building...
[11:32:20 AM] Deploying 2 profiles...
[11:32:21 AM] Wrote Web Application Module to C:\BPMSamples\HelloWorld_OBE\HelloWorld_UI\deploy\HelloWorld_UI.war
[11:32:21 AM] Wrote Enterprise Application Module to C:\BPMSamples\HelloWorld_OBE\deploy\HelloWorld_OBE.ear
[11:32:22 AM] Deploying sca_HelloWorldProject_rev1.0.jar to partition "default" on server soa_server1 [http://localhost:8001]
[11:32:22 AM] Processing sar=/C:/BPMSamples/HelloWorld_OBE/HelloWorldProject/deploy/sca_HelloWorldProject_rev1.0.jar
[11:32:22 AM] Adding sar file - C:\BPMSamples\HelloWorld_OBE\HelloWorldProject\deploy\sca_HelloWorldProject_rev1.0.jar
[11:32:22 AM] Preparing to send HTTP request for deployment
[11:32:22 AM] Creating HTTP connection to host:localhost port:8001
[11:32:22 AM] Sending internal deployment descriptor
[11:32:22 AM] Sending archive - sca_HelloWorldProject_rev1.0.jar
[11:32:41 AM] Received HTTP response from the server, response code=200
[11:32:41 AM] Successfully deployed archive sca_HelloWorldProject_rev1.0.jar to partition "default" on server soa_server1 [http://localhost:8001]
[11:32:43 AM] Retrieving existing application information
[11:32:46 AM] Deploying Application...
[11:32:53 AM] [Deployer:149191]Operation 'deploy' on application 'HelloWorld_OBE' is initializing on 'soa_server1'
[11:32:55 AM] [Deployer:149192]Operation 'deploy' on application 'HelloWorld_OBE' is in progress on 'soa_server1'
[11:33:06 AM] [Deployer:149194]Operation 'deploy' on application 'HelloWorld_OBE' has succeeded on 'soa_server1'
[11:33:06 AM] Application Deployed Successfully.
[11:33:06 AM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[11:33:06 AM] /workflow/HelloWorld_UI
[11:33:06 AM] Elapsed time for deployment: 1 minute, 8 seconds
[11:33:06 AM] ---- Deployment finished. ----
I will look into the salesQuoteLab example later. Can you please let me know how can I see the HelloWorld process in BPM workspace?
Thanks,
Sree

How to get ACK ID inside the BPM

Hi,
In my BPM Scenario,I want to update the database table as soon as the file is created in the destination system.So in the Send step I used Transport Acknowledgement option but I don't know how to get the ACK Id inside the BPM.Please help me.
Regards,
Sharmila

There will be no Ack ID in the BPM.
Read thru this blog to understand the file adapters ack better,
/people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments
Regards
Bhavesh

How to get the XML messages from JMS Queue in BPM

I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,

Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan

How to get transitions BPM activities with PAPI?

Hi:
I wonder if you can get the transitions of the activities of a process with PAPI. And how do you get?.
Also, if you can get the expiration time of each activity, and process in general, and how to get those times.
I hope you can help me and your prompt response.
Greetings.

Hi Eduardo,
Not sure how you'd get the transitions for an activity using PAPI, but here's how you could get the deadline for a work item instance.
Once you get your instance in the "for" loop below you'd use the PAPI variable "PREDEFINE_DEADLINE". As you know, there is an activity deadline (created by having a Due transition coming out of an activity) and a process deadline (created by setting the predefined variable "deadline" somewhere inside the process). This PAPI logic below uses the instanceInfo's three methods getDeadline(), getProcessDeadline() and getActivityDeadline() to retrieve the instance's deadline, process deadline and activity deadline respectively. Know you know this, but the "deadline" variable stores the time of the either the activity or process deadline that will expire first (e.g. if the due transition coming out of an activity will fire in 5 minutes and the process deadline won't fire for another 30 minutes, the PAPI getDeadline() method returns the activity deadline's time of 5 minutes in the future).
If the activity does not have a Due transition, the getActivityDeadline() method returns a null value. Similarly, if the process's "deadline" predefined variable has not been set, then the getProcessDeadline() method returns a null value. If both the activity and the process deadlines are null, then the getDeadline() method also returns a null.
This PAPI logic assumes that you've already done a search and have a list of instances in your "instances.toArray()":
     for (InstanceInfo ii : instances.toArray()) {
       // this gets the deadlines
       Time dl = (Time) ii.getDeadline();
       Time adl = (Time) ii.getActivityDeadline();
       Time pdl = (Time) ii.getProcessDeadline();
       System.out.println("deadline: " + dl
                             + "\nactivity deadline: " + adl
                             + "\nprocess deadline: " + pdl);
       // this gets the role where the work item instance
       //    is currently is sitting
       System.out.println("role name: " + ii.getRoleId());
       // this gets the name of the activity where the
       //    work item instance is currently sitting
       System.out.println("activity name: " + ii.getActivityName());
. . .Hope this helps,
Dan

How to get the list of materials from Sap r/3

Hi Experts,
I have one doubt, here iam implementing
HTTP TO RFC scenario.
My doubts are------
1. Should we create DT MT MI and all (OR) not
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
3.Or the second thing is how to get the list of materials start with some alphabate.
Please reply me for each and every questions mentioned above. Please clarify me.
Helpful answers wil be rewarded.
Reagards
khanna

Hi Khanna,
 1. Should we create DT MT MI and all (OR) not
 Yes U need to create for HTTP site...for RFC U need to import..
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
 You create your own structres for Request and respoce.. and Map it with RFC..
3.Or the second thing is how to get the list of materials start with some alphabate.
 I think it will come with acending order....
for more help go through this link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
regards,
Ansar.

How to get selected row data of an ADF table in HashMap?

Hi,
Can anyone please tell me how to selected row data of an ADF table in HashMap like :
Object obj = pageTable.getSelectedRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)obj;
Now in above code I want the convert rowData in HashMap.
Can anyone please tell me how to do that? Its urgent.
Thanks,
Vik

Vik,
No need to ask the same question 3 times...
In [url http://forums.oracle.com/forums/message.jspa?messageID=4590586]this post, Nick showed you how to get the Row.
If it were so urgent, you could have done a little reading of the javadocs to come up with code like this (not tested, up to you to do that)
HashMap m = new HashMap();
Row r = get it like Nick showed you to;
Object values[]=r.getAttributeValues();
String names[]=r.getAttributeNames();
for (int i=0; i<r.getAttributeCount(); i++)
m.put(names, values[i]);

Multi Mapping : How to get Message count after splitting

Hi all,
I am following below blog.
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
Can any body please tell me how to get the count of messages generated after splitting in the message mapping.. I have created the message data type but not aware what is needed to be done.
Thanks and best regards,
Kulwant Singh

Multi mappings r done in order to split the messages to the number of messages required by the user. So for 1:N mapping, the details about "N" is based on ur requirement. So its not like - when u split, any number of message could get created. The count would be dependent on u.
Regards,
Prateek

How to attach image in BPM CustomJSP and view it

Hello everyone im new here ,
Is there any tutorial how to attach file into BPM Object ?
Im using Oracle BPM Studio 10.3.1
I have seen many tutorial how to attach file into BPM using fileChooser
( https://community.oracle.com/thread/880712 )
and succeed but my next problem is how to show image that i have been uploaded before
Thaaanks
Regards
Shiddiq

Hi Shiddiq,
You can get access to an uploaded file using the execData object.
For example, you can use execData.attachment[1].name to retrieve the file name of your first attachment.
Similartly use execData.attachment[1].contents to retrieve you first file contents in a base64 format.
Antonis

How to get the full result of a google search?

How to get the full results of a google search?
Nov 23, 2006 2:28 AM
Hi, Friends,
I want to build a URL collector as a seamless and integrated part of my desktop application in java language which can access the full search results of google, but i am not sure the right way? what is the best way to do that in java?
Where to find the relevant materials for the problem?
thanks a lot

Cross post - http://forum.java.sun.com/thread.jspa?threadID=788627&messageID=4481369#4481369

How to get cwd of the current process in the kernel in Solaris 8

Hi, everyone
Does any one know how to get the path name of the current working directory of the current process in the kernel in Solaris8 ?
I searched the forum and got some related links, but none of them gives a clear solution.
Sample code can help a lot!
Thank you!

NiuLin wrote:
Thanks for the reply.
What the user structure contains is the vnode pointer of the cwd, but I want go get the pathname of it, like /export/home/abc/.First, all you can get is a path name - there can be more than one. And then there's the problem of determining the path name you want if the process is running under chroot.
Assuming you don't have to deal with those, there's this thread:
http://forum.java.sun.com/thread.jspa?threadID=5084620&messageID=9298124
Of course, that thread doesn't say how to do that. But it appears to be part of Solaris 10.
I once had to solve this same problem for a Linux kernel module I wrote, so I know it's theoretically possible. But I also know it's not as simple as it seems it should be, and any results you do get are not guaranteed to be unique and, IIRC, not even correct in some cases.
Sorry I can't be more specific than that right now.

How to get the name of Interface Mapping ?

Beside the information given by setParameter() i like to know the name of the "Interface Mapping". Does somebody know how to get this information ?

Hi Frank,
not really there are a lot of information in there but not the name of the interfacemapping. By iterating through the xiContext given by setParameter() i got the following output:
As defined in StreamTransformationConstants:
MessageClass = RQ
VersionMajor = 003
VersionMinor = 000
ProcessingMode = A
MessageId = B9EFFFC05A7411D9CA2F00306E5DA806
RefToMessageId = 00000000000000000000000000000000
ConversationId = null
TimeSent = 20041230150856
Interface = ORDERS.ORDERS05
InterfaceNamespace = urn:sap-com:document:sap:idoc:messages
SenderParty = null
SenderPartyAgency = null
SenderPartyScheme = null
SenderService = BS_QGDBW
ReceiverName = msgIF_ORDERS_DATARIVER
ReceiverNamespace = http://prototype.com/xi/test
ReceiverParty = null
ReceiverPartyAgency = null
ReceiverPartyScheme = null
ReceiverService = BS_QGDBW
MappingTrace =
Additional Information found:
Direction = 0
MessageID = B9EFFFC05A7411D9CA2F00306E5DA806
BusinessSystemSender = BS_QGDBW
BusinessSystemReceiver = BS_QGDBW
SenderNamespace = urn:sap-com:document:sap:idoc:messages
SenderName = ORDERS.ORDERS05
QueueID = null
SenderSystem = BS_QGDBW
ReceiverSystem = BS_QGDBW
These are interresting informations but nothing to find out which interface-mapping-name has called the execute-method....
Regards,
Urs

How to get messageID in BPM

Similar Messages

Maybe you are looking for