How to get MM:SS format in to seconds?
I need to get MM:SS-format in to secs? How?
Alexander_Wolff wrote:
A second possibility is: go to the inspektor-panel and chooes format "duration". Pick the slider and set it to mm:ss.
Now: pick the left edge of the slider and drag it to the right. Now the duration changes from "xx:xx" to "xx". This works with the right edge too. When you expand the slider you get "xx:xx:xx".
Regards,
AW
AW,
It is good to keep your suggestion in mind for those occasions when fractions of seconds aren't needed, and for when you want to stay in the Duration value type.
Your suggestion and mine are quite different, but in some cases either may suffice.
Jerry
Similar Messages
-
Hi,
Someone please help me in getting the file format that is selected in the "save as" dialog. I wanted to retrieve it in the string format.
I tried sAIDocument->GetDocumentFileFormat. But i'm unable to implement it correctly. Is there a better way or How do I implement this? Precisely, I wanna get the value as a string when the user selects "save as .pdf".Do you really need to know the file type? What about just checking the bit depth?
var doc = activeDocument;
if (doc.bitsPerChannel != BitsPerChannelType.EIGHT) {//Not 8 bit
doc.bitsPerChannel = BitsPerChannelType.EIGHT;
//do your save etc
}else{
//Ignore -
How to get this report format out ?
Hello all experts,
Sample table creations like the following. Note checkno under xcheck table is not unique. Have tried pivotting the xcheck table then link pivoted xcechk with xcert using certno and invno but this willl end up getting duplicate records. Can u please help ? Basically I am stuck at how to get that vendor name out on the report
create table xcert(
certseq number primary key,
certno varchar2(5) not null,
vendor varchar2(25));
create table xcheck(
checkseq number primary key,
checkno varchar2(8) not null,
invno varchar2(100);
Xcert Data
certseq certno vendor
1 C1001 BP GAS
2 C1002 BUG PEST CONTROL
3 C1003 BP GAS
4 C1004 BP GAS
5 C1005 WILLIES BESTxcheck Data
checkseq checkno invno
1 EF500001 C1001,C1003,C1004
2 EF500002 C1002
3 EF500002 C1005Looking for a following report format
checkno invno vendor
EF500001 C1001,C1003,C1004 BP GAS
EF500002 C1002 BUG PEST CONTROL
EF500002 C1005 WILLIES BEST Thank you
MunsharHi, Munshar,
MunSharmi wrote:
Frank,
"I don't see why you would need another column. What would you need to store, or retrieve, that a table like this wouldn't allow?
Notice my orignal xcheck table data plus a check date column
{code}
checkseq checkno invno checkdate
1 EF500001 C1001,C1003,C1004 11/01/2010
2 EF500002 C1002 12/10/2010
3 EF500002 C1005 01/01/2011
{code}Sure, if you have other data that you haven't mentioned yet, then you need other columns, and maybe even other tables, to store that data.
Talking about this would be a lot easier if you described what you were trying to model in these tables, and what the different entities are.
after nomalization
{code}
seq(PK) checkseq checkno invno checkdate
1 1 EF500001 C1001 11/01/2010
2 1 EF500001 C1003 11/01/2010
3 1 EF500001 C1004 11/01/2010
4 2 EF500002 C1002 12/10/2010
5 3 EF500002 C1005 01/01/2011
{code}What do checkseq and checkdate represent? What is the realtionship between them? If there is another row with checkseq=3, will it necessarily have checkdate=01/01/2011? If there is another row with checkdate=01/01/2011, will it necessarily have checkseq=3?
Shouldn't I need to have the extra seq(PK), then use check seq to group the data report to meet users' target format ? Please adviseIt depends on what your entities are. If you explain that, then perhaps I can give some advice about how to model them.
In general, every type of entity requires a separate table. It looks like xcert represents one kind of entity, uniquely identified by certno. I assume there is some other kind of entity, uniquely identified by checkno, and that you have a table for that which you haven't needed to show in this thread.
Are you saying that there's some other entity, that is uniquely identified by checkseq? If so, it probably needs a table of it's own.
Every table should have a primary key. I had assumed that checkseq only served as the primary key of the xcheck table. If it serves some other purpose, then yes, you would need another column.
Many-to-many relationships usually require a separate table. I was guessing that xcheck was intended to record a many-to-many realtionship between xcert and some other table. Guessing is not always the best way to solve problems. I think it would be better if you explained what you want to do, rather than have me guess at it.
So far, what you've shown is analagous to an order entry system. One kind of entity is customer, another is supplier. Say you're running a company that sells products from many suppliers to many customers. There is a many-to-many relationship between customers and suppliers. Any customer may buy from many suppliers; any supllier may sell to many cutomers. You may have an orders table that keeps track of that many-to-many relationship. You may also have another entity, salesman, that also has many-to-many relationships with customers and suppliers. Depending on what exactly you consider an "order", there are lots of different ways to model this. Can a single order involve many customers? Can a single order involve many suppliers? Can a single order involve many salesmen? If an order always involves one customer buying from one supplier using one salesman, then you may only need four tables. If the situation is more complicated, then you may need more tables. -
How to get this output format in ALV report
Hi.
Can any one pls let me know how to get the following output format in ALV report.Following are the outputfields
companycode location position approver
300 800 01 watson
null null 03 candy
null null 04 smith
null null 05 michael
one empty line after this again
300 800 01 ryant
null null 02 gyan
null null 03 fermi
null null 04 ogata
*Note: Null indicates empty space .( i.e I need to get empty space in output where ever null is there.)
Thanks in advance.
Kind Regards,
samiulla.hi,
u can use 'REUSE_ALV_LIST_DISPLAY'
or
'REUSE_ALV_GRID_DISPLAY' function modules.
SAMPLE CODE :
*& Report Y101982CHD
* TABLES
TABLES: vbak. " standard table
* Type Pools *
TYPE-POOLS: slis.
* Global Structure Definitions *
*-- Structure to hold data from table CE1MCK2
TYPES: BEGIN OF tp_itab1,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
werks LIKE vbap-werks,
lgort LIKE vbap-lgort,
END OF tp_itab1.
*-- Data Declaration
DATA: t_itab1 TYPE TABLE OF tp_itab1.
DATA : i_fieldcat TYPE slis_t_fieldcat_alv.
* Selection Screen *
*--Sales document-block
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln.
SELECTION-SCREEN END OF BLOCK b1.
*--Display option - block
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS: alv_list RADIOBUTTON GROUP g1,
alv_grid RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
*file download - block
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
PARAMETERS: topc AS CHECKBOX,
p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK b3.
* Initialization. *
* At Selection Screen *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
EXPORTING
dynpfield_filename = 'P_FILE'
dyname = sy-cprog
dynumb = sy-dynnr
filetype = 'P' "P-->Physical
location = 'P' "P Presentation Srever
server = space.
AT SELECTION-SCREEN ON s_vbeln.
PERFORM vbeln_validate.
* Start Of Selection *
START-OF-SELECTION.
*-- Fetching all the required data into the internal table
PERFORM select_data.
* End Of Selection *
END-OF-SELECTION.
IF t_itab1[] IS NOT INITIAL.
IF topc IS NOT INITIAL.
PERFORM download.
MESSAGE 'Data Download Completed' TYPE 'S'.
ENDIF.
PERFORM display.
ELSE.
MESSAGE 'No Records Found' TYPE 'I'.
ENDIF.
* Top Of Page Event *
TOP-OF-PAGE.
*& Form : select_data
* Description : Fetching all the data into the internal tables
* parameters : none
FORM select_data .
SELECT vbeln
posnr
werks
lgort
INTO CORRESPONDING FIELDS OF TABLE t_itab1
FROM vbap
WHERE vbeln IN s_vbeln.
IF sy-subrc <> 0.
MESSAGE 'Enter The Valid Sales Document Number'(t04) TYPE 'I'.
EXIT.
ENDIF.
ENDFORM. " select_data
*& Form : display
* decription : to display data in given format
* parameters : none
FORM display .
IF alv_list = 'X'.
PERFORM build_fieldcat TABLES i_fieldcat[]
USING :
*-Output-field Table Len Ref fld Ref tab Heading Col_pos
'VBELN' 'T_ITAB1' 10 'VBAP' 'VBELN' '' 1,
'POSNR' 'T_ITAB1' 6 'VBAP' 'POSNR' '' 2,
'WERKS' 'T_ITAB1' 4 'VBAP' 'WERKS' '' 3,
'LGORT' 'T_ITAB1' 4 'VBAP' 'LGORT' '' 4.
*CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'*
*EXPORTING*
*i_callback_program = sy-repid*
** i_callback_pf_status_set = c_pf_status*
*i_callback_user_command = 'USER_COMMAND '*
** it_events = t_alv_events[]*
*it_fieldcat = i_fieldcat[]*
*TABLES*
*t_outtab = t_itab1[]*
*EXCEPTIONS*
*program_error = 1*
*OTHERS = 2.*
*IF sy-subrc <> 0.*
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.*
*ENDIF.*
ENDIF.
IF alv_grid = 'X'.
PERFORM build_fieldcat TABLES i_fieldcat[]
USING :
*-Output-field Table Len Ref fld Ref tab Heading Col_pos
'VBELN' 'T_ITAB1' 10 'VBAP' 'VBELN' '' 1,
'POSNR' 'T_ITAB1' 6 'VBAP' 'POSNR' '' 2,
'WERKS' 'T_ITAB1' 4 'VBAP' 'WERKS' '' 3,
'LGORT' 'T_ITAB1' 4 'VBAP' 'LGORT' '' 4.
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'*
*EXPORTING*
*i_callback_program = sy-repid*
** i_callback_pf_status_set = c_pf_status*
*i_callback_user_command = 'USER_COMMAND '*
*it_fieldcat = i_fieldcat*
*TABLES*
*t_outtab = t_itab1[]*
*EXCEPTIONS*
*program_error = 1*
*OTHERS = 2.*
*IF sy-subrc <> 0.*
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.*
*ENDIF.*
*ENDIF.*
ENDFORM. " display
*& Form : vbeln_validate
* description : to validate sales document number
* parameters : none
FORM vbeln_validate .
DATA: l_vbeln TYPE vbak-vbeln.
SELECT SINGLE vbeln
FROM vbak
INTO l_vbeln
WHERE vbeln IN s_vbeln.
IF sy-subrc NE 0.
MESSAGE 'ENTER THE VALID SALES DOCUMENT NO:' TYPE 'I'.
EXIT.
ENDIF.
ENDFORM. " vbeln_validate
*& Form :build_fieldcat
* Description : This routine fills field-catalogue
* Prameters : none
FORM build_fieldcat TABLES fpt_fieldcat TYPE slis_t_fieldcat_alv
USING fp_field TYPE slis_fieldname
fp_table TYPE slis_tabname
fp_length TYPE dd03p-outputlen
fp_ref_tab TYPE dd03p-tabname
fp_ref_fld TYPE dd03p-fieldname
fp_seltext TYPE dd03p-scrtext_l
fp_col_pos TYPE sy-cucol.
*-- Local data declaration
DATA: wl_fieldcat TYPE slis_fieldcat_alv.
*-- Clear WorkArea
wl_fieldcat-fieldname = fp_field.
wl_fieldcat-tabname = fp_table.
wl_fieldcat-outputlen = fp_length.
wl_fieldcat-ref_tabname = fp_ref_tab.
wl_fieldcat-ref_fieldname = fp_ref_fld.
wl_fieldcat-seltext_l = fp_seltext.
wl_fieldcat-col_pos = fp_col_pos.
*-- Update Field Catalog Table
APPEND wl_fieldcat TO fpt_fieldcat.
ENDFORM. "build_fieldcat
*& Form : download
* description : To Download The Data
* Parameters : none
FORM download .
DATA: l_file TYPE string.
l_file = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = l_file
filetype = 'ASC'
TABLES
data_tab = t_itab1
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " download
HOPE IT WILL HELP YOU
REGARDS
RAHUL SHARMA -
How to get the right format if I copy data off another source....
IWorks '08
I have a data source that I want to copy to Numbers and it posts it all in the first row, when I paste it. (Excel will automatically format it correctly). I've tried a number of different things and can't figure out how to get the data to post across the page. Can Numbers even do this?Welcome to Apple Discussions
Could you possibly have the insertion cursor blinking in the cell rather than just having a cell selected?
If the cursor is blinking in the cell, Numbers "thinks" you want to paste all of the content in that one cell. By just selecting the cell, the data will be separated if Numbers "sees" the separations. This used to be a problem, particularly with data copied from a web page in Safari, but is mostly fixed in Numbers '09. -
How To Get Supported Audio Formats?
If I have a particular Mixer how do I get the supported Audio Formats
for every line?
I know DataLine.Info has a getFormats() method.
How do I get a DataLine.Info from a Line?
I know how to get the Source and Target Lines and they subinterface
DataLine, I just dont know how to get the DataLine.Info from DataLine.
Thanks a lot!Mr Evil, thanks a lot! That was very helpful.
Your code is going to help me quite a bit when I get to 24 bit audio.
I love that JSR page. I did miss that relevant FAQ question though.
Instead of checking for instanceOf i was casting within a try catch.
It should work now.
Is there anyone alive in this forum?
I'm guessing that sound is not a popular application for Java. That was funny. I feel your pain.
I cant wait to get out of the nuts and bolts of java sound so i can
move on to the actual DSP fun : ) -
I have a question which is when I use to_char(sysdate,'hhmi') to get today's time, I find that it retuns me 330 when the time is 3:30 pm.
My question is how to get 1530 when the time is 3:30 pm?
Thank you for reply.Is this what you need ?
SQL> desc test1
Name Null? Type
C1 VARCHAR2(10)
SQL> desc test2
Name Null? Type
C2 VARCHAR2(4)
SQL> select * from test1;
C1
1:00 PM
4:00 PM
7:00 PM
SQL> select * from test2;
C2
1300
1600
1900
SQL> select c1, c2 from test1, test2
2 where c2 = to_char(to_date(c1,'hh:mi am'),'hh24mi');
C1 C2
1:00 PM 1300
4:00 PM 1600
7:00 PM 1900
SQL> -
How to get multiple output formats for each execution of the report?
Hi,
Is it possible to get multiple output formats for each execution of the report? If so can you provide some details?
ThanksIn Reports 6i, Reports Distribution was introduced. This allows you to run the report once and output to a number of destinations with a different format. It also allows you to distribute individual sections within a report to different destinations in different formats.
The Destinations for a Report to distribute to are defined either in a distribution file and passed on the command line or inside of the report definition.
To add a destination to the the report definition, bring up the property palette against the report object and then select the "Distribution" property under the "Report" node. This will bring up a dialog that allows you to create a distribution list. You can then test this list by selecting "file->distribute" from the menu.
To run a report that is to be distributed through rwrun60, you need to add "distribute=yes" to the command line. It will pick up the destinations from the report definition. If you add "destination=<filename>" then it will pick up the destinations from the specified "<filename>" and ignore the destinations in the report definition.
Note: if "distribute=yes" is specified on the command line then the destype/desname/desformat parameters will be used to format the report (ie: which printer/display to use during formatting for sizing objects) but will be ignored when the report is sent to the destinations. -
How to get the Date format inside the table
I have a startdate column in the db in the format May 5, 2001 12:39:00 PM, when I query it from a view in this way : SELECT startdate, ... FROM ..., it returns the format in the db,
However I have to do this SELECT
decode(startdate, null, 'NOT START'), startdate), ... the result is 5-MAY-01,
then I tried this to_char(startTime, 'Month DD, YYYY HH:MI: A.M.') the results become May 05, 2001 12:39:00 PM. (more space between month and day, and 05 instaed of 5)
Does anybody know how to fix this, so I get exactly what is in the db?
Thanks in advanceNo matter what you do if you are storing a date in a column it will get stored in the Oracle's internal 7 byte date format.
The way you get it on retreiving it is as set by your date format. You can either change the default date format for the instance, the individual session or the individual SQL statement(in this case using to_char(date, 'format')).
If you want to store the date in a format you want to store you'll have to store it as char or varchar2.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by George ([email protected]):
I have a startdate column in the db in the format May 5, 2001 12:39:00 PM, when I query it from a view in this way : SELECT startdate, ... FROM ..., it returns the format in the db,
However I have to do this SELECT
decode(startdate, null, 'NOT START'), startdate), ... the result is 5-MAY-01,
then I tried this to_char(startTime, 'Month DD, YYYY HH:MI: A.M.') the results become May 05, 2001 12:39:00 PM. (more space between month and day, and 05 instaed of 5)
Does anybody know how to fix this, so I get exactly what is in the db?
Thanks in advance<HR></BLOCKQUOTE>
When you do to_char() with 'month' oracle blank pads the month to nine characters, the same goes with day too. So to get rid of it you'll have to trim() the month. And if you want to get a single digit for date less than 10 instead of 0x you'll have to do a bit of extra jugglery using translate() or replace().
Hope this helps
Naveen -
How to get ISO date format?
Hi there,
I'm having problem converting date to ISO format. How do I convert a date in the form of "Tue Sep 25 10:18:59 PDT 2007" to "20070925101859" ? Basically I am trying to get the date in "yyyymmddhhmmss". Below is my code, I keep getting "Tue Sep 25 10:18:59 PDT 2007", please help:
beginDateAsDate = new Date();
SimpleDateFormat sdf = new SimpleDateFormat("yyyymmddhhmmss");
sdf.format( beginDateAsDate );
endDateAsDate = beginDateAsDate;
Calendar c1 = Calendar.getInstance();
c1.setTime(beginDateAsDate);
c1.add(Calendar.YEAR,2);
endDateAsDate = c1.getTime();
System.out.println("Begin Date is: " beginDateAsDate.toString());+
System.out.println("End Date is: " endDateAsDate.toString()); +
Output:
Begin Date is: Tue Sep 25 10:18:59 PDT 2007
End Date is: Fri Sep 25 10:18:59 PDT 2009Use SimpleDateFormat, but don't forget to do this first:
sdf.setTimeZone(TimeZone.getTimeZone("UTC")); -
How to get a currency format for a character field
for some specifix reason, we have a requirement to show character field (which results in value 633948) in the format $633,948
how do i do this?
if i do SELECT to_char(:c_1,'$999,999')) from dual;
it gives me ora: 01722: invalid number error
c_1 is a user parameter of data type characterTry using TO_NUMBER first, as in something like:
SQL> VARIABLE c_1 VARCHAR2(6)
SQL> EXECUTE :c_1 := '633948';
PL/SQL procedure successfully completed.
SQL> SELECT TO_CHAR(TO_NUMBER(:c_1), '$999,999') FROM DUAL;
TO_CHAR(T
$633,948Hope this helps. -
How to get date in format(1st jan 2006 ).
can we get get the date in the 1st jan 2006 format .
we can get the date in format 1 jan 2006 by using (d MMM yyyy) but i am not able to get st, nd, or rd after the day in(d mmm yyyy)format like 1st 2nd 3rd 4thSearch and thou shall find. I read a similar thread just yesterday, school task?
you can say that you have a String postfix, which is set like this:
String postfix = "";
switch(dayOfMonth) {
case 1:case 21:case31: postfix = "st"; break;
case 2:case 22: postfix = "nd"; break;
case 3:case 23: postfix = "rd"; break;
default: postfix = "th";
} -
How to get the date format yyyy-mm-dd?
Hi,
I have an iphone (3.1.2) and would like to use the date format yyyy-mm-dd (international date format). Is the possible? If yes, how?
CheersI know of no other way to set the date format other than what I mentioned in my previous post. There are third party apps that will do what you want in the app. store, but they are not permitted to access the underlining software.
-
Hi all,
i have a very simple query.
I have report name like this "SALES REPORT DATE FOR "+Year(CurrentDate())
and it is showing result of SALES REPORT DATE FOR 2,014
but i want report look like SALES REPORT DATE FOR 2014
how i can change the year format form 2,014 to 2014
i am using 3.1
Thanks in advance
RanjeetHi
Find the below link
BI4.1 Business Layer Enhancements - Create Display Format -
How to get Landscape Letter format in Smartforms ?
Hi,
In case of SAPscript if we want to define Letter size with landscape format we go to Baisc setting ->
Page format and then select Letter and orientation as L (Landsacpe format, 279mm-215mm).
But in <b>case of smartforms</b> if I want Letter size with format <b>landsacpe format</b> how do I do that ?
If I go to Form attributes -> Page format. I only see Letter format but no details about orientation.
The format avaialable is Portrait ( 2515mm - 279mm)
Please help.
Regards,
Rajesh...Under Global Settings --> Form Attributes --> Output Options you can change the page format.
Under Pages and Windows --> (Page Name) --> Output Options
you can select portrait or landscape
Maybe you are looking for
-
Does anyone know how to fix this?
-
This version is horrible, and I want to downgrade back to previous version if I can't then I am going back to internet explorer, the search engine is an aberration...just trying to perform a search for hotmail sign in page and had to click on have a
-
Stop-motion with camera?
I have a school project where I need to animate a stop-motion video. We used a Canon 7D to take pictures and I imported them in lightroom. What I need to do now is take all of these frames and put them together to make the video. I tried manually doi
-
Do I need to switch of iCloud when I travel abroad or it is enough to switch of data roaming?
-
Error: FS-10157 unable to verify & FS-10815: DUPLICATE OWNER NODES
Hi All, I am in the processing of upgrading Production Oracle 10.2.0.4 to 11.2.0.3 in windows 2003 cluster. OFS version is 3.4.2. In Post-upgrade steps at HA Only: Adding the Database to the Cluster Group, I am unable to verify database. I am gettin