How to get name of default mail server?

Hi ,
I need to get the name of default mail server . In 1.5 i can get this using
System.getenv("MAIL_SERVER");.
How do i get this in 1.4?
Since getenv() is depricated in 1.4 , how can i get the name of mail server in 1.4?
plz help me....

How do i get this in 1.4?Pass the environment variable to your JVM (windows) with the -D parameter
java -Dmail_server="%MAIL_SERVER%" myClassthen in your code
String mail_server = System.getProperty("mail_server");--
http://www.rgagnon.com/howto.html

Similar Messages

How to get yahoo as e mail server in windows 7 on Compaq Presario CQ57

Just bought this laptop and added firefox as browser. always had yahoo as e mail service on other computers with no problem. I can recieve e mail but cannot send any on this one or a desktop with ubuntu as oper.system. It seems as windows will not allow yahoo email to send out only recieve.

Hi @kvartsnorsk
Welcome to the HP Support Forums!
I know you are looking for drivers for Windows XP, unfortunately, that notebook was not sold configured for that OS. Drivers are available for windows 7 and 8 (both 32 and 64 bit)
What if I Don't See My Operating System?
As to the USB boot device, it is likely that your usb boot image is not UEFI, so you would have to enable legacy boot in the BIOS to allow for it to boot off of that device.
About UEFI and the Startup Menu
Enable Legacy Boot Mode - NeoSmart Knowledgebase
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

How do I changing the default WIKI Server name on OS x Lion Server?

How do I changing the default WIKI Server name on OS x Lion Server? Enterprise solutions suggested I post this question here to get a direct answer. I have searched everywhere... This would be the META TAG On the top of browsers...

I went looking for this answer, to no avail.
Solution I used:
step 1 - Navigate to the folder /usr/share/collabd/coreclient/locales/en.lproj/ and open the only file there called default.strings.
step 2 - somewhere around lines 74 & 164 you will see the default title "OS X Lion Server". I'm sure only one of the is required to be changed to adjust the title on the window, but I changed both to my desired title. Save and close. If asked for authentication, enter you administrator details.
step 3 - restart the server (or wiki service may work too)
step 4 - done and your Wiki welcome page should show the new title
Finally I have a bookmark that means something by default.
Hope this helps

How to change the default mail server??? Please help.

I need to change the default mail server to my yahoo account. When I had my PC this was easy but I cannot figgure it out on the MAC. I am in China and I need to inform my insurance company of some information or they are going to cancel a policy. When I go to their site for email contact what pops up is the apple email, which I do not have an account for and ofcourse does not work. Their email address does not show and I cannot find it anywhere so I need to change the default to my yahoo account. On my PC this was easy and when I went to a site that had a contact but no email address, my yahoo account would come up. I hope I am explaining this correctly. I really need to do this fast as the letter I got took some time to get here and I just returned from some field work so I have about 2 or 3 days to get the information to them. Thank you.

John,
This does not demonstrate anything for me, since it brings up a Compose window for Mail, with my preferred account as the From address. This happens whether I access with Safari, or with Firefox.
The point that I am trying to make, is that in OSX, there is no way to have web mail access become the default mail method -- it only works with a true mail client, for POP, IMAP or .mac access on your Desktop.
If you have the type of yahoo account that can be setup for POP access with Mail, then when you click, you can choose your yahoo address as the From address to send from.
Of course you can insert the address in a new message with your Yahoo web mail, but I have understood you to want to have the message start containing the info from one of the pages on the site?
See the discussion at the following link, for setting up a Yahoo account in Mail:
http://discussions.apple.com/thread.jspa?messageID=2760483&#2760483
Ernie

TS3988 The correct information in the email address, Full name and Incoming mail server panes are greyed out, and I can get no further in bring my iCloud a/c online. Any ideas? Thanks.

I've just updated and installed Mountain Lion. I've clicked for iCloud for Mail. The correct information in the email address, Full name and Incoming mail server panes are greyed out, and I can get no further in bring my iCloud a/c online. Any ideas? Thanks.

They are grayed out because they are automatically set up whey you check Mail in System Preferences. If you didn't do that, go back and do so and your iCloud email account will be set up automatically.

HT1277 How do I get to my e-mail Server?

How do I get to my e-mail server?

Hello,
Who is your eMail provider, the part after the @ sign?

How do you turn your outgoing mail server to online vs offline?

How do you turn your outgoing mail server to online vs offline

I had this problem too but I fixed it today. I have been unable to send emails with two of my 4 accounts.
Go to the mail menu preferences.
Click on account in question.
Select the outgoing SMTP mail server (the one offline), this has a drop down list, click on the edit server list.
Click on the advanced button.
Make sure use default port is checked.
Make sure SSL is unchecked (unless your provider requires it, mine does not work with it checked).
Have authentication set to password.
User name should be your email address for that account.
Make sure correct password is entered (for some strange reason my password box was blank on this account).
Push the ok button.
For me the SSL box was checked and the password was missing. This is strange to me considering I have unchecked the SSL Box on the mail preference advance page. Also, I went through the complete set up account when I first created the account, why was my outgoing server password box empty?
I hope this helps.
Here is a link to some visual aids with the steps from my ISP
http://support.knology.net/content/smtpauth/smtpredirect.cfm

How to get the files in presentation server while uploading?

how to get the files in presentation server while uploading?
give me the function module name

Hi,
PARAMETERS: P_FILE LIKE RLGRAP-FILENAME DEFAULT C_PRES. "Prsnt Srvr
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      DEF_PATH         = P_FILE
      MASK             = ',..'
      MODE             = '0 '
      TITLE            = 'Choose File'
    IMPORTING
      FILENAME         = P_FILE
    EXCEPTIONS
      INV_WINSYS       = 1
      NO_BATCH         = 2
      SELECTION_CANCEL = 3
      SELECTION_ERROR = 4
      OTHERS           = 5.

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.

How to get name of sbRIO programatically

How to get "name" and "Comment" of sbRIO which I write to sbRIO-9602 in MAX in Identification box (Model, Serial number, MAC address, Name)?
Solved!
Go to Solution.

That shows:
- IP settings
- IP adress:   136...etc.
  - DNS name:   MyMaster5 - THAT IS WHAT I NEED, just in wrong place - in MAX it is not in IP settings, that's why i didn't searched for it there.
  - subnet mask 255.255.255.0
  - gateway 136...
  - DNS server 136...
- MAC address 00800...
- serial number 16....
- system state Running
- model name sbRIO-9602
- model code 7373
- password protected restarts? T/F
- halt if TCP/IP fails? T/F
- locked?   T/F
- use DHCP? T/F
Still there is no "comment" as in MAX. But that's not so important now.
I have LW Development system 2009 SP1 Profesional, Realtime Development 2009 SP1
Thanks very much!

How can I find out the mail server from email address?

Hi:
How can I find out the mail server from email address?
for example: If I know the email address is [email protected],
how to find the pop3 and smtp mail server?
THANK YOU

You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
Sean

How to get or set default fiscal year value in billing doc

Hi All, my question is simple, how to get or set default fiscal year value (VBRK_GJAHR) in billing document.. is it possible.
Thanks.
Regards,
Michael

Hi Michel
If you feel that the fiscal year value should come in the billing document then you have to use a user exit USEREXIT_NUMBER_RANGE .
As this is a related to ABAP , you should give the inputs and ABAP'ers will give the number range as per our requirement .
Regards
Srinath

How to get name of table from front end

Hi,
How to get name of table from front end in EBS 11i?
thanx
Ashish

Hi
Sandeep is correct. The "Help"/"Record History" will give you the table/view name, but sometimes this particular menu function give me a "Record History is not available here." error message.
I then use the following menu functions (this will also give you additional information, like column details).
1) Open Forms
2) Click on Help/Diagnostics/Examine (*you might have to enter the APPS password at this point)
3) Change "Block" to "System"
4) Change "Field" to "Last_query"
The system will populate the "Value" field with the query that was executed in order to populate the form.
Regards
Frank

How to get names of sub tabs?

Hi All,
Could someone tell me how to get names of all sub tabs?
I have Parent Tab T1. T1 has 3 sub tabs T1_1, T1_2 and T1_3.
I would like to have T1_1, T1_2 and T1_3 sub tab names in the list.
Thanks in advance!!
Dip

Dip,
You can get the tab names from apex dictionary views, apex_application_tabs & apex_application_parent_tabs . Thanks.
Regards,
Manish

How to get names of method parameters ?

How to get names of method parameters (Not only their type and value) is it only possible during debugging ??
for example void myFunction(int a,int b)
I need the "a" , and the "b" The issiue is about the java.lang.reflect.InvocationHandler ,
and its method invoke(Object proxy,
Method method,
Object[] args)
throws Throwable
I Have the parameter objects themself and their types using method.getParameters() , this is fine ,, but i need the names of the parameters !!!

If the class file was compiled without debug information included then it is impossible to get the original parameter names, as used in the source code.
However, If the class file does include debug information, then the method names are hidden deep within the class file. You'd need to parse the class file yourself. Check out a copy of the Java VM Specification for a detailed format of the java class file format.
It's not a trivial task to parse the java class file, and the VM spec isn't easy reading. You'd nearly be writing a class file disassembler.

How to get name of default mail server?

Similar Messages

Maybe you are looking for