How to get Payload of SOAP Message in Advance Adapter Engine

HI All,
I am wondering if anybody can tell me how to view the Payload of SOAP Sender and Receiver Message in Advance Adapter Engine?
Does Anybody know how to check mapping payload in Advance Adapter Engine because in ABAP you can see the mapping payload under Request Message Mapping but when you use AAE you can't see the Request Message Mapping Payload.
I have a SOAP to RFC Scenario in which I can't see the SOAP Sender and RFC Receiver Mapping Payload.
When I am sending incorrect data to an RFC I am getting this error which is very strange and new to me.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: Unable to split a synchronous message
Any comments would be much appreciated.
Thanks,
Iqbal

HI All,
I have managed to find Michal's Blog which is talking about getting the mapping payload but unfortunately I don't know how to create Adapter Module so I am wondering if somebody can please provide me EAR file so that I will request the Basis guys to deploy the code and hopefully this will solve my query.
Michal's Blog
As you all probably know while using local Advanced Adapter Engine (AAE) processing in SAP PI 7.1 the message is logged only once (during processing by sender adapter). This is great in terms of performance but what if we need to check the mapping output? Is there a way do do it somehow? It turns out that we don't have such an option in standard yet. Is there any alternative then?
It turns out there is - a simplest adapter module there is...
Local AAE works in such a way that from the sender adapter it executes the receiver adapter so in the outbound message to PI processing you can see the adapter info logs of the receiver adapter and this is what we can use. The idea is to add an adapter module to the receiver adapter which will put the content of the message into the audit log of PI message processing. We can do it by writing a few lines of code:
PI/XI: target message logging with local AAE not possible ? not anymore...
*Please upload the file in any free site or <REMOVED BY MODERATOR>
<READ RULES OF ENGAGEMENT>
Thanks,
Edited by: Prateek Raj Srivastava on Jan 6, 2012 9:10 PM

Similar Messages

How to get rid of the message Client submission probe stuck in the Exchange Server Queue?

We have Exchange 2013 in Hybrid with Office 365.
How to get rid of the message in the Exchange Server Queue?
Mounting the database fixed it.
Thanks!!!

Mounting the database fixed it.

How to get the number of messages consumed by a MDB ??

Hi all,
How to get the number of messages consumed by a MDB displayed in OEM in a Java Application ???
DMS ??? what use DMS ???
tanks

ok.
Well using DMS is one way to get at these sorts of stats in a programmatic manner.
There's a Java API you can use, or you could call out to the Spy servlet to query the DMS stats in either text or XML form.
I don't have an MDB published so I can't show you specifiically, but here's the sort of query you can use to extract the data.
http://localhost:8888/dms0/Spy?format=raw&table=oc4j_ejb_stateless_bean&recurse=children
Which produces a table of the TEXT form:
<DMSDUMP version='9.0.4' timestamp='1163456821185 (Tue Nov 14 08:57:01 CST 2006)' id='8888' name='OC4J'>
<statistics>
/oc4j [type=n/a]
/oc4j/default [type=oc4j_ear]
/oc4j/default/EJBs [type=oc4j_ejb]
/oc4j/default/EJBs/jmsrouter_ejb [type=oc4j_ejb_pkg]
/oc4j/default/EJBs/jmsrouter_ejb/AdminMgrBean [type=oc4j_ejb_stateless_bean]
pooled.count:     11     ops
pooled.maxValue:     1     count
pooled.minValue:     0     count
pooled.value:     0     count
ready.count:     11     ops
ready.maxValue:     1     count
ready.minValue:     0     count
ready.value:     0     count
session-type.value:     Stateless
transaction-type.value:     Bean
/oc4j/default/EJBs/jmsrouter_ejb/EnqueuerBean [type=oc4j_ejb_stateless_bean]
pooled.count:     11     ops
pooled.maxValue:     0     count
pooled.minValue:     0     count
pooled.value:     0     count
ready.count:     11     ops
ready.maxValue:     0     count
ready.minValue:     0     count
ready.value:     0     count
session-type.value:     Stateless
transaction-type.value:     Bean
/oc4j/default/EJBs/jmsrouter_ejb/TimerHandlerBean [type=oc4j_ejb_stateless_bean]
pooled.count:     11     ops
pooled.maxValue:     0     count
pooled.minValue:     0     count
pooled.value:     0     count
ready.count:     11     ops
ready.maxValue:     0     count
ready.minValue:     0     count
ready.value:     0     count
session-type.value:     Stateless
transaction-type.value:     Bean
</statistics>
</DMSDUMP>
Or produces an XML document of the form:
http://localhost:8888/dms0/Spy?format=xml&table=oc4j_ejb_stateless_bean&recurse=children
You can use the Spy console to find the table that contains the details for MDB and then take it from there.
This is not what you specifically want to do, but it does provide a good overview of how DMS is used.
http://www.oracle.com/technology/pub/notes/technote_dms.html
-steve-

How to get only current exception message from tables

Hi
In my sceanario , I want to have the list of Current MRP exception messages list from table
I understand that MRP detailed lists, including all exception messages, are stored in transparent table MDKP and cluster table MDTC.
I can tell ABAPer to write a report for me , to read the data from these tables , but I guess these tables contain old exception message also , which are not currently appearing in MRP list
How to get only current exception message
Rgds,
sandeep

Sandeep,
MDTC contains only data from the most recent MRP run. So, all messages you see are those which are currently valid.
The messages might have first appeared during a previous run, but they still need to be addressed.
Before you invest a lot of time and effort into writing and debugging a custom report, you should probably try to use the standard SAP functionality found in MD06. On the Processing indicator tab, you can select "Only with new exceptions". Here you can tag a material/plant as 'processed', and thereafter, the exceptions that existed there before you tagged the part will not be re-displayed.
Best Regards,
DB49

What is payload, xi-soap message and xml payload....

can any 1 explains abt What is payload, xi-soap message and xml payload....

Hi Shiva,
see this abstract from messages file:
"The SOAP header of a message contains all the important information that the Integration Server requires to forward the message, while the payload contains the actual business data (such as <PurchaseOrder> in the example above). <b>You can also append an unlimited number of attachments to the message before it is sent. Attachments typically comprise non-XML data, for example, pictures, text documents, or binary data."</b>
Check this link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/b6/0b733cb7d61952e10000000a11405a/content.htm
Regards,
Subhasha

Getting synchron message data from advanced adapter engine

Hi,
we have to get all synchron messages from the advanced adapter engine. Normally all messages with errors must be persisted on data-base. How this will be done? We try to with
/people/kenny.scott/blog/2009/03/08/pi-71-af-messaging-system-audit-log-persistence).
But this don´t work :-(.
What´s about correct messages? How this can be persisted?
Is there a API or we must implement a Adapter Module?
Thanks in advance,
Frank

Hi,
if you just want to see the msg and not its audit log, then in PI by transaction SXMB_ADM - integration engine configurtion - configuration data, add a entry for RUNTIME category LOGGING_SYNC parameter and set it to 1...........then you can see your synch msgs in SXMB_MONI transaction in your PI system.
Regards,
Rajeev Gupta

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

Message flow between advanced adapter engine and messaging system for ICO scenarios

Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472    Information    MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472    Information    Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.499    Information    Message successfully put into the queue
12/08/2014 09:26:06.499    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499    Information    The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500    Information    HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.501    Information    Message status set to DLNG
12/08/2014 09:26:06.513    Information    Message successfully put into the queue
12/08/2014 09:26:06.513    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515    Information    Message status set to DLNG
12/08/2014 09:26:06.533    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.548    Information    Message successfully put into the queue
12/08/2014 09:26:06.548    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550    Information    Message status set to DLNG
12/08/2014 09:26:06.551    Information    Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.571    Information    Message successfully put into the queue
12/08/2014 09:26:06.571    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.573    Information    Message status set to DLNG
12/08/2014 09:26:06.580    Information    Message successfully put into the queue
12/08/2014 09:26:06.580    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582    Information    Message status set to DLNG
12/08/2014 09:26:06.583    Information    Delivering to channel: IDOC_R
12/08/2014 09:26:06.583    Information    MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583    Information    XI message received for processing
12/08/2014 09:26:06.587    Information    Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588    Information    IDOC metadata repository is RXX
12/08/2014 09:26:06.589    Information    Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590    Information    XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595    Information    Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813    Information    IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817    Information    TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819    Information    Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821    Information    Message status set to DLVD
Thanks & regards
Dingjun

Hello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari.

XI Adapter ? No messages in the adapter engine in RWB

Hi Guys,
I have the scenario SOAP-PROXY. I have configured XI Adapter on the receiver side. I have used xml spy to post the messages directly to the IS. I could not see any messages in the adapter engine in RWB.
I have seen the messages processed successfully in the integration engine under RWB.
can anybody explain why i could not see any messages in the adapter engine ? Is It normal with the xi adapter on the receiver side ?
Thanks,
Raj
Message was edited by:
raj reddy

Raghu.
I've done the following:
1. I've executed SE38 tx code.
2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
4. There are no available variants, so I clicked on the "Execute immed." button.
5. The job starts. I can monitor it on the SM37 tx code.
6. It only deleted 20 messages.
What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
what do you think of it??
regards
Carlos.

XI message status at Adapter engine level using a table (SAP table)

Hello Experts,
XI message status at Adapter engine level using a table (SAP table).
We want to write a custom report using ABAP so Pls tell why the status u2018Holdingu2019 and u2018To be deliveredu2019 are present in message monitoring of RWB but not in the status (MSGSTATE) field of SXMSPMAST table.
My need is to write a report to get the messages based on the these status from table level.
Please let me know the table name and field name for this and the table name for the desciption of the status of XI messages at Adapter level.
Thanks
Gopesh

Hi Gopesh,
the Adapter Engine Messaging System messages are on the Java schema,
i.e., see the following -
[XI/PI tables|https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xi+tables]
Regards
Kenny

Message split on adapter engine for the java based IDoc adapter

Hi Guys,
Do you know if message split on adapter engine is available for the java based IDoc adapter on the single stack (PI 7.31)?
I'm getting such exception when I try to post 3 IDocs
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: Invalid XML 1.0 character encountered within IDocXML for type <ns0:Messages>:
state=EXPECTING_IMMEDIATE_TAG_END, charPosition=68, lineNumber=1, columnNumber=69, invalidChar=U+0078,
sourceSnippet=...UTF-8" standalone="no"?><ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1><...
^
Mapping is one to many.
Each IDoc content has been compared manually against the xsd schema and it was fine.
I know that old way of modifying xsd is still possible.
Best regards,
Wojciech

Did you find a solution to this? Having a similar error right now.
Thanks and kind regards
Jens

Message struck in adapter engine with status Hold

Hi,
In intergaration engine all messages are processed, I have checked SMQ1, SMQ2 (no message is struck in queue)
where as messages struck in adapter engine with status Hold, I have checked this in RWB. How to resolve this?
Regards,
Krishna

Hello,
Below is some information on how to resolve this type of issue:
1 - In the RWB, expand the tray for "Configure Table Columns" - by clicking on a square at the right end of this heading.
2 - Check the checkboxes for "Serialization Context" and "Sequence Number". These should then appear in the table columns as well.
3 - Add the Serialization Context to the Extended Filter Criteria. Search the messages in status HOLD based on this new additional criteria.
4 - Sort the messages in ascending order based on the Sequence no.
5 - Check the predecessor message of the first message in status "HOLD"
Based on the following status for this predecessor messages, the actions that can be taken for the HOLD messages are:
a - Predecessor is in Failed State/System Error : Cancel/Resend the
first message in status HOLD after this. Then the remaining messages
can be cancelled/resent.
b - Predecessor is in DLVD state(delivered state) : First Holding
message can be resent/cancelled followed by the others.
c - Predecessor is in NDLV(Non-Delivered Status) : Check why the
predecessor message failed and correct the reason for the failure.
Then resend the predecessor message and then cancel/resend the
remaining HOLD messages. Alternatively, you can directly try
resending this NDLV predecessor message and see if it goes. If it
goes, then the remaining HOLD messages can be resent/cancelled.
Another option could be to cancel this NDLV predecessor message so
that it goes to FAILED state and then cancel/resend remaining HOLD
messages.
Regards,
Sarah

How to change connection port between INTEGRATION SERVER and Adapter Engine

Hi,
I have scenario that in the productions server we are using SAP web dispatcher to connect to Adapter Engine for example the port is 60000.
So when we copy this server to DR environment the webdispatcher is not there. is that any way to change the all connection port between IS and Adapter from 60000 back to original port 50000 ?
Please advise ?
Thank You and Regards
Fernand

HI,
The waiting status is because of Message Queue is in wiating status. This may be because of overload of the messages, or may be your receiver systems is not ready etc.
SO go to SMQ2 and check the status of the queues.
Also have a look into this blog-
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
<i>
Why I can see this messages only in the integration server?</i>
>>>If message reachs the Adapter engine, you can see in the Adapter monitor. In your case, message is still there in the Integration Engine. Once the queues are cleared it will reach the Adapter engine, so you can monitor it in the adapter engine
Regards,
Moorthy

How to get DateTime from PI message SOAP Header

Hi ALL
Can you please let me know how we can get the time message received in PI from the SOAP message header
<SAP:TimeSent>2010-08-17T16:24:16Z</SAP:TimeSent>
I would like to capture this value and send it in the payload of the message, initially I was using the Current TIme date function.
However, if I can get the time received value from the SOAP Header message, It will be more accurate in providing the Time the message was received by IE.
Thank you,
Parikshit
Sample SOAP Header from MONI:-
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>4C69D4B7-9806-0162-E100-80000A8221E6</SAP:MessageId>
<SAP:TimeSent>2010-08-17T16:24:16Z</SAP:TimeSent>
- <SAP:Sender>

If you want to get the TimeSent from SOAP header and map it to some field in ur message then u can easily do it using following UDF :-
GlobalContainer globalContainer;globalContainer = container.getGlobalContainer();
java.util.Map param = globalContainer.getParameters();.
String timeSent = (String) param.get (StreamTransformationConstants.TIME_SENT);
return timeSent ;
Note: This UDF won't need any input. So u need not to maintain any variable in UDF signature.
Edited by: Samiullah Qureshi on Aug 18, 2010 9:41 AM

How to get the total SOAP XI message as output in file?

Hi all,
i had done a scenario Mail - XI -File . if i used XIPAYLOAD and check mail package then the file adapter gives the output in ximail30.xsd format. I want the whole SOAP XI messages and also the internal message which we can see in url
http://server:port/MessagingSystem/ as output in the text file.
how can we configure mail adapter to give SOAP XI messages and also the internal message as output in the text file.
Anyone have a idea to solve this please help me.

Use the TCP gateway if you want this for monitoring,
/people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway
Regards
Bhavesh

How to get Payload of SOAP Message in Advance Adapter Engine

Similar Messages

Maybe you are looking for