How to get search help results in RIGHT-JUSTIFIED column

I am writing a search help with search help exit. Therefore, I use a table lets say tabA. I don't need all fields of tabA but need some further fields which I fill during exit.
tabA does not have currency or number fields.
I need a currency field and use a char20 field of tabA instead. filling of this field and showing results is o.k., but of-course it is shown left-justified.
I did not find any fields of shlp-fielddescr which sounds like left/centered/right-alignment. Another try was to fill char20 field with leading '_' signs - that looked terrible and was not right-justified either, because of not fixed-size font.
Let's resume: there is no number or currency field which I can use. The shown results appear in a column of not fixed-size font.
Any other idea?

Hi, I have the same problem. Did you get to resolve it? . Thanks

Similar Messages

How to get search help for 2nd parameter based on the 1st parameter value

Hi all!
   I have 2 parameters (material no, revision level). I have created a search help for revision level. It has an importing parameter :material no. and one exporting parameter : revision level.When I checked it, it's giving the revision values only for the specified.
In my report , I have kept these 2 materials in my selection screen.For revision level , I have added the matchcode object which I have created. When I pressed F4 for revision level, it's giving all the values irrespective of the material no. in the first parameter. How to solve it? Please suggest.

Hi,
Try this code filling internal table fields,
DATA: BEGIN OF values,
        OID TYPE ZCL_OBJECT-OBJECTID,
        ODEC TYPE ZCL_OBJECT-OBJECT_DESC,
       END OF values,
       W_FIELD(10).
DATA: ZCL_PROJECT-PROJECTID type zcl_project-projectid,
      ZCL_OBJECT-OBJECTID(5).
DATA: progname TYPE sy-repid,
      dynnum   TYPE sy-dynnr,
      dynpro_values TYPE TABLE OF dynpread,
      field_value LIKE LINE OF dynpro_values,
      values_tab LIKE TABLE OF values.
CALL SCREEN 100.
*&      Module VALUE_PROJECTID INPUT
      text
*MODULE VALUE_PROJECTID INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
      EXPORTING
           tabname     = 'ZCL_PROJECT'
           fieldname   = 'PROJECTID'
           dynpprog    = progname
           dynpnr      = dynnum
           dynprofield = 'ZCL_PROJECT-PROJECTID'.
*ENDMODULE.                 " VALUE_PROJECTID INPUT
*&      Module VALUE_OBJECTID INPUT
      text
MODULE VALUE_OBJECTID INPUT.
   CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
W_FIELD = FIELD_VALUE-FIELDVALUE.
SELECT OBJECTID
          OBJECT_DESC
    FROM ZCL_OBJECT
    INTO (VALUES-OID,
           VALUES-ODEC)
WHERE PROJECTID = FIELD_VALUE-FIELDVALUE.
   APPEND VALUES TO VALUES_TAB.
ENDSELECT.
   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'OID'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'ZCL_OBJECT-OBJECTID'
            value_org   = 'S'
       TABLES
            value_tab   = values_tab.
ENDMODULE.                 " VALUE_OBJECTID INPUT
*&      Module INIT OUTPUT
      text
MODULE INIT OUTPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'ZCL_PROJECT-PROJECTID'.
APPEND field_value TO dynpro_values.
IF SY-UCOMM = 'BACK'.
    LEAVE program.
ENDIF.
IF SY-UCOMM = 'ANS'.
   LEAVE TO SCREEN '0'.
ENDIF.
ENDMODULE.                 " INIT OUTPUT
START-OF-SELECTION.
WRITE: / field_value-fieldvalue,
         W_FIELD.
LOOP AT VALUES_TAB INTO VALUES.
    WRITE / VALUES.
ENDLOOP.
if sy-subrc <> 0.
    WRITE / field_value-fieldvalue.
endif.
Plzz reward points if it helps

How to get search help tables of a specific table

Hello Guru,
I've a problem.
I'm looking for a way to find out how many "search help" tables exist in a specified Check Table.
Well, when I look for a check table of a field like MARD-LGORT
I got as a check table T001L, now when I read the data from it, using the function module RFC_READ_TABLE I got all the data that I need, except now that I don't know which fields are actually displayed in the search help table of the field LGORT
This what I want, in my case, the field that I need in the table T001L are : LGOBE LGORT WERKS
All the others, are not so important.
Please let me now, if you have an idea to find this.
The search help table is for LTGORT : H_T001L
Best Regards,
Kais

hi ,
try this
in the F4 value..
call funtion ' HELP_VALUES_GET'
DISPLAY        =   "Text u want to display
FIELDNAME       = "Field name in specific table
INPUT_VALUE    = "Any default value
TABNAME           =   "Table name
Exporting
SELECT_VALUE     = "The selcted vale in pop=up
SELECT_INDEX      = "selected Index.
            Regards,
prabhudas

How to get the full result of a google search?

How to get the full results of a google search?
Nov 23, 2006 2:28 AM
Hi, Friends,
I want to build a URL collector as a seamless and integrated part of my desktop application in java language which can access the full search results of google, but i am not sure the right way? what is the best way to do that in java?
Where to find the relevant materials for the problem?
thanks a lot

Cross post - http://forum.java.sun.com/thread.jspa?threadID=788627&messageID=4481369#4481369

Adding new field in search help result view

Dear Experts,
I want to include one more field in search help result. The field shoud give description.
How can i do this in UI result view?
If I try to add attribute in result view, the result view is of type table, and it does not allow us to add value node. It will allow us to add model attribute. If I add attribute in search help resut table view then will i be able to see it in table form.
Thanks and regards
Pankaj Kumar

Hi Pankaj,
Its not that difficult.
There are two ways
1. You can enhance your Result BOL object through EEWB and append your z-field to std. BOL result object. This then appears automatically for your result context node and then you can pull it to the view in config tool.
2. Directly go to your context node class (CN00 , CN01 etc ) , now copy method GET_S_XYZ , paste it and rename as GET_yourfieldname. Similarly copy SET_S_XYZ, GET_M_XYZ and GET_I_XYZ and paste and rename. Once activated. Quit the component browser completely. Open again using bsp_wd_cmpwb. open you view and then your node. You can find you new attribut present as struct.YourField.
You can then copy code from available setter-getter methods for this attribute. You must handle setter getter by urself in this case. In may std. nodes, this is done for description field. I have personally done this for product descripton field.
if you dont want the field to be part of structure ( i.e. as struct.Yourfield ) then you can also copy paste GET_XYZ, SET_XYZ methods. your filed then do not appear as Struct.YourField but it just appears as YourField name under context node.
Hope this helps you.
Thanks & Regards.
You can check PRODUCTDESCRIPTION attribute of BTAdminI node of BT115QIT_SLSQ/Items view of BT115QIT_SLSQ component. They have added it the same way as i described above. You see the GET_ method to see how they are retrieving product description. In my object, i wrote direct query to Comm_prshtext table to retriev short_text by passing product guid and then assigen it to value variable of Get method.
Edited by: suchita P on Sep 20, 2008 2:22 AM

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

How to get the fixed result in a DES/CBC mode with fixed input data and fix

How to get the fixed result in a DES/CBC mode with fixed input data and fixed key. Below is my program , I tried to get the checksum of the DESInputData with the DESKeyData, but each time the result is different.
below is my code:
byte[] DESKeyData = {(byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01, (byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01 };
byte[] DESInputData = {(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31,(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31 };
SecretKeySpec skey = new SecretKeySpec( DESKeyData, "DES" );
Cipher cipher = Cipher.getInstance("DES/CBC/NoPadding");
cipher.init( Cipher.ENCRYPT_MODE, skey );
byte[] result = cipher.doFinal( DESInputData );

Use class javax.crypto.spec.IvParameterSpec to specify IV for CBC mode cipher:
// Create CBC-mode triple-DES cipher.
Cipher c = Cipher.getInstance("DESede/CBC/PKCS5Padding");
// Specify IV.
IvParameterSpec iv = new IvParameterSpec(new byte[] { (byte)0x01, (byte)0x23, (byte)0x45, (byte)0x67, (byte)0x89, (byte)0xAB, (byte)0xCD, (byte)0xEF });
// Initialize cipher with proper IV.
c.init(Cipher.ENCRYPT_MODE, yourKey, iv);
// Encrypt and decrypt should work ok now.
For more info about cryptography, search the Internet for IntroToCrypto.pdf from mr. Phil Zimmerman. This document is also part of PGP (http://www.pgp.com).
An excellent book is 'Applied Cryptography' from Bruce Schneier (http://www.counterpane.com/applied.html).
Regards,
Ronald Maas

How to get F4 help for Standard Text Key of a operation based on Order type

Hi Experts,
How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
Thanks in Advance.
Regads,
Bujji

Hi Guys,
Any help on this...
Regards,
Bujji
Edited by: Bujji on Dec 22, 2008 12:42 PM
Edited by: Bujji on Jan 5, 2009 2:00 PM

How to implement Search Help in Interacive Form based on WebDynpro Java?

Hi Experts,
How to implement Search Help in Interacive Form based on WebDynpro Java?
Could someone please provide the prerequisites and the code for the same.
Regards,
Shobhit

Extend the controller and get the handle of the current row of the VO. Set set the attribute context filed accordingly. Also get the handle fo the flexbean and set the context. According rendering would change.
Regards
Sumit

How to extend search help range?

Hi all,
I have a requirement. I have to display more than 5000 search help results in the selection screen when I press F4 on a field. Usually SAP permits only 5000, but I want to display more than 5000.
Useful answers will be rewarded immediately.
Thanks & Regards,
Venkat.

Hi Putcha,
I don't think there is any restriction you can need to provide how many hits you required. and you can give any entry(There may be some limit but much more than 5000)
Regards,
Atish

I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even

I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even uninstalled my lightroom and reinstalled it with same issue. Help!!!

Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.

How to add search help to customer field of field selection on ESS Screen?

Hi all,
I am able to get customer field CUSTOMER01 from field selection customization on leave application ESS Screen. How to attach search help which contains Holiday date & its description to this field?
Thanks,
Swapnali

Hi,
This is for working time -> leave request screen
In field selection there is one field 'code for description of illness'. I have done required config for getting this field on ESS Screen. This field already has standard search help. So I m able to view the values of this field on ESS screen .
So I thought to try assigning custom search help to this CUSTOMER0 field. Is there any method in BADI PT_ABS_REQ through which I can achieve the same. Please help.
-Swapnali

Restrict search help results on order types

I need to restrict search help results on the account assignment category for order type for the users when creating a SC. I have define fix values on the attributes PM_AUART & ANR & KNT (Order type, Order & Account assignment category) and maintained the related others PM attributes as well. But when I select the search help the system brings up all the Orders type and not the ones defined at the user attributes - PM_AUART (Order type). Do I am missing something? How can I restrict the search help when searching for order types?
Your support is highly appreciated.
Thanks
William

Hi
Please elaborate which SRM version you are currently on..
Which Search help you are referring to and the name of the serach help which is being used ?
Regards
- Atul

How to Provide search Help for files on Application Server

Hi Guys,
               Can anyone tell me How to Provide search Help for files on Application Server. I have put a file name on selection screen. I want to give search help for files on application server.
Thanks & Regards.
Harish.

Hi Harish,
Use the following code,
tables sxpgcotabe.
data: lt_execprot LIKE btcxpm OCCURS 0 WITH HEADER LINE,
        w_filepath(60)       TYPE c, --> length depending on your Directory path.
SELECT SINGLE *
    FROM sxpgcotabe
         WHERE name = 'LIST_DB2DUMP'
           AND opsystem = sy-opsys.
IF sy-subrc <> 0.
    SELECT SINGLE *
      FROM sxpgcotabe
           WHERE name = 'LIST_DB2DUMP'
             AND opsystem = 'UNIX'.
    IF sy-subrc <> 0.
      MESSAGE e000 WITH 'External operating system command '
                        'LIST_DB2DUMP not found'.
    ENDIF.
ENDIF.
sxpgcotabe-parameters = p_filepath. --> provide the directory path.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
       EXPORTING
            commandname                   = sxpgcotabe-name
            additional_parameters         = sxpgcotabe-parameters
            operatingsystem               = sxpgcotabe-opsystem
       TABLES
            exec_protocol                 = lt_execprot
       EXCEPTIONS
            no_permission                 = 1
            command_not_found             = 2
            parameters_too_long           = 3
            security_risk                 = 4
            wrong_check_call_interface    = 5
            program_start_error           = 6
            program_termination_error     = 7
            x_error                       = 8
            parameter_expected            = 9
            too_many_parameters           = 10
            illegal_command               = 11
            wrong_asynchronous_parameters = 12
            cant_enq_tbtco_entry          = 13
            jobcount_generation_error     = 14
            OTHERS                        = 15.
IF sy-subrc <> 0.
    MESSAGE e000 WITH text-e01 p_filepath. "Directory failed
ENDIF.
Loop round the directory list, split each line up into a line table
and get the last data for each line, should be the filename
Then build the dirlist.
REFRESH t_dirlist.
LOOP AT lt_execprot.
    REFRESH t_dirline.
    SPLIT lt_execprot-message AT space INTO TABLE t_dirline.
    DESCRIBE TABLE t_dirline LINES w_nolines.
    READ TABLE t_dirline INDEX w_nolines.
    MOVE t_dirline-data TO t_dirlist-filename.
    APPEND t_dirlist.
ENDLOOP.
Here you will get all the files in the directory mentioned in Application server.
For displaying them as a Search help use the FM '/BMC/ZPOPUP_GET_VALUE'
Pass the Internal table to this FM.
Regards,
Paul.

How to get f4 help in alv grid in container-urgent

hi,
how to get f4 help in alv grid in container using abap objects
ganesh

Hi Ganesh,
Did you have a look at sample report BCALV_TEST_GRID_F4_HELP ?
Here is part of the header documentation:
*& Report BCALV_GRID_F4_HELP *
Purpose:
~~~~~~~~
This report illustrates the use of f4-Help in an alv grid control.
Background:
~~~~~~~~~~~
There a two possibilities to implement an f4-Help in the alv grid
control: one can either use standard f4-help or write one by Hand.
For the former there is nothing to do at all. This report shows how
to implement user-defined f4-help.
I am sure you will find within this report the solution you are looking for.
Reward points if this Helps.
Manish

How to get search help results in RIGHT-JUSTIFIED column

Similar Messages

Maybe you are looking for