How to get status of target system battery level
Hi,
I want to get the current battery percentage on the target system with labview. Does anyone have DLL that I can use, or can someone please help me. The target system connected to the Host system running labVIEW via TCP/IP.
thanks,
John
The DLL is Windows only though....
What target are we talking about? Is it a RT Desktop? A Windows Laptop?
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.
Similar Messages
-
How to get the current logical system?
Dear Abapers:
I can't find the logical system value from the table SYST, pls tell me how to get the current logical system name, Thanks!Hi,
Check with the table T000, the Logical system field name is LOGSYS.
Regards
Thiru -
How to get status of transaction
Hi Gurus,
can anyone tell me how to get status of the transaction in crm.
regards,hi vijay,
what kind of transaction did you want to get the status ?
for order, complaint, activity, and task, you can used function modul 'CRM_ORDER_READ' for getting status of the document.
hopes it helps
cheers -
CRM document - how to get status duration?
Dear all,
I extract data CRM -> BI using standard datasources: 0CRM_SRV_PROCESS_H, 0CRM_COMPLAINTS_I, etc
I need build a report with status duration of documents
For example, if document was processed 4 days in statuses OPEN > IN PROCESS > VALIDATION > CLOSED report should be following:
OPEN - 1 day
IN PROCESS - 2 days
VALIDATION - 1 day
Each CRM datasource has start date and last change date of the document
But there is no fields which stores date or duration of intermediate status change
Could you please give an advice - how to get status duration?
Thanks in advanceHi Oleg,
Please check whether following standard datasources could meet your requirements:
0CRM_TSS_DTRACK CRM Tracking of Document Processing Lifecycles
0CRM_TSS_PKYF Timestamp Service: Performance Key Figures
You can find the documents in transaction code SBIW, through IMG path
Settings for Application-Specific DataSources (CRM)
-> Settings for Extracting CRM Objects
-> Define Extraction to Track the Document Processing Life Cycle
-> Define Performance Key Figures for Time Stamp Service Analysis
Best Regards,
York -
How can I deactivate Mac Air's battery level notification sound?
How can I deactivate Mac Air's battery level notification sound?
Hi Joseph. Try opening systems preferences on the Mac and go to mobileme. Just make sure under sync, that contacts are selected. Hope this helps.
-
How to get automatically batch no in delivery level?
Dear Expert
How to get automatically batch no in delivery level?
Thanks for Advancehi,
answering to your question.
please go IN SPRO - LOGISTICS GENERAL - BATCH MANAGEMENT - BATCH DETERMINATION AND BATCH CHECK & you need to CONFIGURE what ever comes in the name of SD.
hope this clears your issue
balajia -
Tracking Idoc status in target system from XI
Hi
We have done File to IDOC Scenario succesfully i.e HR
data from file has been mapped to HR Idoc(HRMD_A06) .
Now when Idoc is posted to R/3 , SXMB_MONI shows
successful status(Idoc posted successfully) .
But when we check in R/3 in WE05 transaction ,though
the idoc is present but it shows status 51/52
with message "Idoc could not be posted" /"IDOC not
fully posted" .
In this case how can we track in XI whether the Idoc
is properly posted in the target system(i.e R/3) .
Since XI only shows that Idoc was successfully sent
irrespective of the status in R/3 .
Please suggest as we are new to XI .
Regards,
ShikhaHi
Thanks for the guide.
we are not sure of the steps to configure it in R/3
system so that it sends the acknowledgement back to XI
system.
When we tried to configure it as per the guide , for
test purposes we executed the program RBDSTATE but it
gave message "No parties are interested in the selected
data" .
Please guide us on this .
Thanks
Shikha
Message was edited by: Shikha Jain -
How to get the local file system path of an image that loaded into the image component in cq5?
Hi,
I'm having hard time uploading image from filesystem where as drag and drop works.
I'm not getting a path of image selected from filesystem.
here is my code..
private String populateImage() throws Exception {
if (currentNode != null && currentNode.isNode()) {
Node ImageNode = JcrResourceUtil.createPath(currentNode, "image",
null, "nt:unstructured", true);
imageUrl = ImageNode.hasProperty("fileReference") ? ImageNode.getProperty("fileReference").getValue().getString() : "";
imageUrl = imageUrl.trim();
log.info("MANAGE PROFILE BEAN IMAGE URL INSIDE IF IS: " + imageUrl);
} else {
imageUrl = properties.get("fileReference", "");
imageUrl = imageUrl.trim();
log.info("MANAGE PROFILE BEAN IMAGE URL INSIDE ELSE IS: " + imageUrl);
return imageUrl;
So if I drag and drop..
ImageNode.hasProperty("fileReference") is returning a valid path
but if I upload an image it is returning Null.
So how to get the path? any suggestions around would be appreciated...When you say path you mean you want the path to print out in your HTML? Is that accurate? If so you generally need to constructe that path based on the path to the current component. So if you component is located at /content/mysite/en/about/mypage/jcr:content/parsys/image then the path to the image would generally be something like /content/mysite/en/about/mypage/jcr:content/parsys/image.img.jpg/1283829292873.jpg. The .img. selector triggers the servlet associated with the foundation parbase - /libs/foundation/components/parbase/img.GET.java. The reason you reference it this way is that there is no filesystem path to the image - it is stored in the repository not on the file system, and it requires a servlet or script to ge the binary from the repository and steam it.
Normally the way you'd construct this is to use the out of the box Image class - so look at /libs/foundation/components/image/image.jsp. Now this example assumes that your component where you loaded the image extends /libs/foundation/components/parbase. If it doesn't then you either have to change your sling:superResourceType to /libs/foundation/components/parbase or some other component that does exten /libs/foundation/components/parbase. -
How to set a default target system in a change request
Hello,
I would like to set up a default value for the target system when I create a change request,
for example, if I create a CHR in "DEV" system, it would auto fill the "Target" field with "TST"
I tried to look for TPPARAM parameters or some Global ones,
but with no luck
Anyone got a clue how to do it?
Thanks.Hi Elhanan,
The next system depends on the transport route.
and the transport will follow the route assigned. this again depends on the transport layer assinged to the development package of the object.
so the assignment is like this.
Dev object > Development package (previously called dev class) > Transport layer > Transport Route
for more information, please see the help.sap.com software logistics part.
http://help.sap.com/saphelp_nw04/helpdata/en/60/e3fcfae36811d184810000e8a57770/frameset.htm
Hope this helps,
Debasis. -
SAP Idocs -How to handle response from target system
Hi,
I am working on a scenario in which I will send Idocs asynchronously from SAP thro a SOAP adapter to a webservice deployed on the target system.
After the Idoc data is posted in the target system,the target system will send the acknowledgement for the receipt(basically response message).How to handle this scenario?
SAP Idoc( outbound asynchronous)---> SAP XI3.0(soap adapter) ---> Target system(inbound synchronous)
Do I need to go for BPM to handle this situation?
Is there any alterantive to BPM.
If any of the forum members who have worked on the similar scenario could help me in finding a better solution,I will be thankful to them.
Thanks,
LeoHi Udo,
Thanks for the info.My scenario is like this.
SAP R/3 Idoc -> SAP XI 3.0 <-> Webservice in the target system.
The webservice in the target system will receive the Idoc as a request messsage and send a response message synchronously.
Since Idoc is sent asynchronously( I believe Idocs sent from SAP are always asynchronous),there is no Proxy waiting in SAP R/3 to receive the response message from the target system.
If I go for BPM for the above scenario,will the BPM steps look like the following.
1)Receive Idoc from SAP.
2)Send Idoc sysnchronously to webservice
3)Receive the response from the webservice synchronously.
4.Post the response message to a proxy which can handle it further in SAP R/3.
Please note that my knowledge in BPM is limited and correct me if I am wrong.
Thanks in advance
S.Banukumar -
How to get data from CRM systems?
Hi...
How to use adapters to get data from external systems such as CRM systems.It is totally depends what kind of message is or are coming out from CRM Systems.
If it is sending IDoc then use Idoc adapter.
If it is BSP and sending HTTP Post then use HTTP adapter.
If you are using proxy then use XI adapter.
thanks
farooq -
How to get data into BI system
Hi Experts,
I am a newbie to SAP BI. Please guide me how to get the data from tha R/3 tables into BI system tables. When I check the data in SE11 in R/3 (for ex: VBAK, VBAP...... etc), I could see all the records. Now how can I get the same data in BI system tables? When I check in BI system with Tcode SE11, I couldn't find any data for the tables VBAK,VBAP..... etc. Please guide me how to fill these tables in BI from R/3. Points will be rewarded for the solutions.
Regards,
RaviHi Ravi,
U can follow the link and know how to get data from R/3 to BI.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/28/4c553c42360a40e10000000a114084/frameset.htm">data sources</a>
Still I give overview to u. U need to create data source in R/3 side, replicate them in BI and use them in your info source to load the data. Data source are of two type application specific (system generated) and generic (customer defined). Data Extraction can be based on table, view or infoset query.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN * -
How to get status codes of field?
For every document type or status field which we can see on front end, there is code which is finally stored in table.
e:g: Go to transaction /nme53n
Select any purchase req.
Select status tab from item.
See processing status field.
These processing status saves as N,B, etc in table.
I know there is way to see these codes followed by full description on front end screen itself. I think using personal settings, but dont know how to set this. Please let me know how to see status codes + description on front end.You gui status should be implemented in the main screen which the subscreen resides, all function codes should be handled at that level. I believe you will need to set the F2 funciton code in your gui status, set the function code to PICK and then handle this function code in your PAI user command module. Should work.
subscreen cannothave their own pf-status.....so create a pf-status for a screen in which ur subscreen is called...include 'pick' or f2 as onre of the functions code for the choose option.
to differentiate the field u have to use get cursor field fldname.
if it is a table control field u have to use
get cursor field <fldaname> line <n> value <fval> -
How to get status profile (STSMA) in user exit ILOM0001
Hi ABAPers,
I am currently working on user exit ILOM0001 (Check before saving a functional location) and need to get information about status profile (STSMA). I have checked parameters that is imported into this user exit (DATA_IFLO, DATA_IFLO_OLD, DATA_IFLOS) and none of them have STSMA.
Could anybody help me how to get this field STSMA into user exit ILOM0001?
Appreciate it.
Thanks
Regards
HadiDear Kolla,
Really appreciate your answer, but
I don't want to generate or make settlement receiver.
I was building a script in user exit IW010009,
And the issue is I can not capture the content of field settlement receiver.
If we want to capture screen field, ex. equnr, we can use structure CAUFVD,
when i see the technical detail in this field, the structure for settlement is DKOBR, field EMPGE, but i cannot call it on debug.
Kindly need your help on this issue. -
Call RFC for Lookup from BPM. how to determin the correct target system
Hi
I have a scenario where i am sending a sync call to SAP R/3 to fetch some sata using the BPM.
The issue is I can have multiple SAP systems so to determin the SAP system for the correct lookup is necessary.
in the rec determination step of Config I can configure multiple receivers but this isthrowing an error saying the multiple receivers cannot be determined for sync step.
Any idea why is such an error occuring
Regards
NikhilNikhil,
Multiple Receivers cannot be configured for a Synchronous Interfaces. reason is that when you are sending the request message to the target systems, XI will recieve multiple responses for one request and this is aginst the concept of Synch Message Processing.
You will have to have an option of determining the receivers inside your BPM and using separate Send Steps for each of these.
Regards
Bhavesh
Maybe you are looking for
-
How to disable iPhoto from starting up when I connect a camera?
I don't use iPhoto, but annoyingly, it starts itself every time I connect my camera to my iMac. How do I disable this? There seems to be nothing in "Preferences". I have iPhoto 4. One of the gripes that I have, and a reason I don't use or update iPho
-
How to deal with BP inconsistencies in SRM?
Dear Experts, How to deal with Business Partner inconsistency in SRM? A BP is damaged beyond repair? Should we delete the BP of the user (SU01 user)? Are we allowed to delete a BP? or do we need to archive the BP? What will happen to the follow-on do
-
Event handling for UIImageView inside UIScrollView
Hi, I have a UIScrollVIew. I added a UIImageView inside it. I found that UIImageView did not reveive any events. No matter what I do, there is only image zoom in out and flip. How can I enable UIImageVew to receive some events? Thanks, fm
-
I am trying to deploy a Web Service EAR using stateless session beans across 2 servers in a cluster. The Admin server is not part of the cluster. I am using WLS 7.0 SP1. I am getting this error in one of the server trace
-
I am a little confused with documentation about character sets. In chapter 9 it says that "The database is created using Unicode(AL32UTF8) character set, which is suitable for global data in any language." but in Chapter 10.3 Supported Character Sets