Call RFC for Lookup from BPM. how to determin the correct target system

Hi
I have a scenario where i am sending a sync call to SAP R/3 to fetch some sata using the BPM.
The issue is I can have multiple SAP systems so to determin the SAP system for the correct lookup is necessary.
in the rec determination step of Config I can configure multiple receivers but this isthrowing an error saying the multiple receivers cannot be determined for sync step.
Any idea why is such an error occuring
Regards
Nikhil

Nikhil,
Multiple Receivers cannot be configured for a Synchronous Interfaces. reason is that when you are sending the request message to the target systems, XI will recieve multiple responses for one request and this is aginst the concept of Synch Message Processing.
You will have to have an option of determining the receivers inside your BPM and using separate Send Steps for each of these.
Regards
Bhavesh

Similar Messages

  • Insufficient rights - How to determine the correct rights?

    All,
    Does anyone know how to determine the correct rights if you get the error message "Insufficient rights for operation"?
    In SAP backend systems you can start transaction SU53 to check your "missing" authorizations, but is something like that also possible in MDM?
    I also don't see any detailed information in the logs or reports.
    If anyone has an good suggestion, please let me know, since I don't want to do "trail and error" to know what Functions to set to Execute and what Tables/Fields to set to Read/Write (because there are quite some combinations to check).
    p.s. I've read the complete reference guide of the MDM console and sometimes it's really obvious what Functions and Tables/Fields you have to set, but for instance when I want to give authorization to maintain Relationships in the DataManager and have set the Main table and all Relationships to Read/Write and have set all Records and DataManager functions to Execute it still doesn't allow me to maintain the relationships on the records! I only get the message "insufficient rights" and it's unclear what rights are missing!
    Regards,
    Marcel

    hi Marcel,
    I doubt if we have anything in MDM to show you what authorizations are missing.However,you can check the following :
    1. What activity are you trying to perform when you get this error.
    2. Check if authorization are given in the role for that actitvity.
    3. Check how many roles are allocated to user and  Is authorization given in all roles if more than 1 role is assigned to that user?
    Please let us know answer of the queries...
    Regards,
    Vineet

  • How to determine the correct moment when Word has finished to write to a docx file

    Hello,
    we are currently passing a document to Microsoft Word for editing and want to take back the changed/saved document when editing is finished. But it seems we have issues to determine the correct moment when Word has for sure saved all changes and
    it is save to take back the file.
    To pass the document to Word we use ShellExecuteEx with the file name. Then we use the Running Objects Table and a File Moniker to wait for the file to be closed.
    Sample code:
    HRESULT hRes = S_OK; 
    CComPtr<IMoniker> spIMoniker; 
    CComPtr<IRunningObjectTable> pRT; 
    hRes = GetRunningObjectTable(0, &pRT); 
    if (FAILED(hRes))
       TWTHROW1(TWERR_ANY_ERROR, hRes, _T("GetRunningObjectTable failed."));
    hRes = ::CreateFileMoniker(m_strTempFilename.AllocSysString(), &spIMoniker);
    if (FAILED(hRes))
       TWTHROW1(TWERR_ANY_ERROR, hRes, _T("CreateFileMoniker failed."));
    while (S_OK == pRT->IsRunning(spIMoniker) && !m_bShutdown)
       Sleep(500);
       continue;
    So we wait for the file to be removed from the Running Objects Table and additionally wait until we can get exclusive access to the file before we take over the changed file. But still it seems to happen that we take the file too early. Hence it
    seems the file is removed from the Running Objects Table by Microsoft Word before saving the file has completed.
    Is this behaviour of Microsoft Word by design? What is the best practice to identify the moment in time when writing the file has completed. Some other applications like Winzip seem to do the same thing.
    Thanks,
    Wolfgang

    Hi WolfGang,
    Thanks for posting in MSDN forum.
    Based on the description, you are developing application with Windows API. I would like to move it to
    General Windows Desktop Development Issues forum.
    The reason why we recommend posting appropriately is you will get the mostqualified pool of respondents, and other partners who read the forums regularly can either share their knowledge
    or learn from your interaction with us.
    Thanks for your understanding.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to determine the sender business system for ABAP client proxy

    Hi All,
    I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
    Is it the logical system which is reflected in Technical System?
    let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
    And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
    If no, please correct me.
    Thanks in advance
    Leo

    Hi lawrence
    When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.                               
    A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
    Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
    Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
    You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
    Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
    Regards
    sandeep

  • How to determine the correct K value within a grayscale image, quick?

    I frequently need to know specific grayscale values from grayscale images for further use in other applications.
    Problem: When opening the Color Picker the picked grayscale value is separated in CMYK. But I need it in K only.
    I actually have a workaround by comparing the RGB values while zeroing the CMY values and altering the K unless I found the correct value.
    Anyone knows an easier way to get a correct grayscale value in K (out of CMYK), quick?
    And btw. the K from the info panel does not show the correct value I need to know.

    Hi ,
    Please configure the steps in SPRO ..
    Product Costing Controlling -> Cost Object Controlling -> Product Cost by Order -> Period end closing -> Work in Progress
    Configure all the steps , it needs to be ideally done by the FICO consultant , please revert back or search SDN regarding issues in configurations
    Regards
    Sarada

  • How to determine the download media required from my License key?

    Hi
    After recently rebuilding a dead PC,  The user has advised me she used to use Illustrator.
    Unfortunately the user does not have the install media available.
    Support advised my license key is a volume license for Design Standard.
    I have downloaded Design Standard (Universal) but the Licence key is not accepted.
    Can anyone advise how to determine the correct download based on my License key?
    Many thanks

    Some times you may need to sign in to volume licensing account and download
    refer
    Adobe Licensing Website | Serial numbers | Orders | Accounts

  • I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can u

    I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can use the product I purchased?

    Hi Rosera,
    This is bad and I am sorry to hear that you are running into these issues.
    Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
    It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
    Have you tried the steps mentioned below by Barbara?
    If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
    Regards,
    Ankush

  • How to determine the Support Team from Reported-by?

    Hi All,
    We need to determine the support team based on reported-by.
    I have concluded it is only possible by customization of developing ZBADI from these threads:
    Re: How to determine the Support Team from the Reported by?
    Automatic determination support team based on own specs?
    Re: Route tickets based on Message creaters's location
    So we have created ztable which has relation between SAP component, Reported-by and Support Team.
    Now i need to develope a ZBADI  and assign to the action definition SLFN0001_ADVANCED_FIND_PARTNER(i hope).
    Can anyone help me out with the piece of code. Because i don't which FMs to be called for read and update the support desk message.
    Note: Action definition SLFN0001_ADVANCED_FIND_PARTNER uses method call Z_CRM_DNO_PARTNER_1(which is a copy of CRM_DNO_PARTNER_1 and applied some correction as per note: 1041455).
    Thanks in advance.
    Regards
    Sanjai

    closing this thread.

  • How to determine the mount point for directory /tmp ?

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
    http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
    "Free Space: Rac2: /tmp"
    Cause: Could not determine mount point for location specified.
    Action: Ensure location specified is available.
    Expected value: n/a
    Actual value: n/a
    I have checked the free space using the command:
    [root@Rac2 /]# df -k /tmp
    Output:
    Filesystem     1k-blocks     used     Available     Use%     Mounted on
    /dev/sda1     30470144     7826952     21070432     28%     /
    As you see above, the free space is enough, but could not determine mount point for /tmp.
    Do any folk understand how to determine the mount point for directory /tmp ?
    Thanks.

    I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
    My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
    I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

  • Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

    Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

    You're not speaking to Apple on in this forum, nor will someone from Apple see this post.   We are just users like you and I.
    Have you tried to restore or reset your phone?
    Or contact your carrier in re: to your sim card

  • How to determine the maximum allowable length of a filename for Window ?

    Hi all,
    Could I know how to determine the allowable file length (the length of the absolute path) for a file in Window environment?
    Due to some reason, I generated a zip file with a very long filename ( > 170) and put in a folder(the length of the folder path around 90). The length of the absolute path is around 260.
    I used FileOutputStream with the ZipOutputStream to write out the zip file. Everything is working fine while i generating the zip file.
    However, while i try to extract some files from the zip file i just created, i encountered the error
    java.util.zip.ZipException The filename is too long.
    I am using the class ZipFile to extract the files from the zip file like the following
    String absPath = "A very long filepath which exceed 260";
    ZipFile zipF = new ZipFile(absPath);  //<-- here is the root causeIs it possible to pre-determine the maximum allowable filepath length prior i generate the zip file ? This is weird since i got no error while i created the zip file, but have problem in extracting the zip file ......
    Thanks

    Assuming you could determine the max, what would you do about it? I'd say you should just assume it will be successful, but accommodate (handle) the possible exception gracefully. Either way you're going to have to handle it as an "exception", whether you "catch" an actual "Exception" object and deal with that, or manually deal with the length exceeding the max.

  • How to determine the proper size for Oracle 8i Data Base Objects

    Hi,
    I'm working on an Oracle 8i Data base. I'd like to know how to determine the proper size for the Data Base objects such as tables, datafiles, tablespaces...
    Thanks.

    Start with the docs.
    http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76956/schema.htm#949
    Best Regards
    Krystian Zieja / mob

  • I just paid for and downloaded the wrong version of Adobe Acrobat X Pro. I downloaded the Microsoft version and I have a Mac running OX Yosemite. How do I get a credit for what I ordered and then reorder the correct Mac version of Adobe Acrobat X Pro

    I just paid for and downloaded the wrong version of Adobe Acrobat X Pro. I downloaded the Microsoft version and I have a Mac running OX Yosemite. How do I get a credit for what I ordered and then reorder the correct Mac version of Adobe Acrobat X Pro

    If you ordered Acrobat via subscription, then you can use either Windows or Mac version.  Just download/install the Mac version, then activate it with your Adobe ID.
    If you purchased the perpetual license, then you need to Contact Customer Care bu chat or phone.

  • Im from mauritius how to buy the iphone6 16GB online ?

    Im from mauritius how to buy the iphone6 16GB online via apple.com can anyone tell me the steps how to do that?

    You wait until if / when they are available in your country.

  • How do I determine the correct sales org for the employee?

    Hi
    The requirement here is to determine the correct sales org for the employee logged in when creating an activity (a customer visit). We know that all employees will belong to one sales org.
    On this basis, in the organisational data determination I have maintained the organisational data profile Z0001 with the Organisational Model Determination Rule: 10000162 (employees for responsible org. unit). I have left the Responsibilities Determination Rule empty. I am not sure if both have to be filled. Can anyone explain the difference between the two?
    I have checked the sales organisation and distribution channel. This is for the sales scenario.
    I simulated this rule in Maintain Determination Rules. I entered the Sales Org and no agents (employees) were found.
    The org data profile Z0001 has been assigned to the transaction.
    The Object Permitted in Determination has been checked for the sales scenario in the Organisational Model.
    Regards
    Declan

    Hi PePe
    I made the change and it worked as I wanted it. Thanks a lot.
    You say there's no need to Maintain the Responsibilities Rule. Can I ask what this section does and why it can be one or the other?
    Regards
    Declan

Maybe you are looking for