SAP Idocs -How to handle response from target system

Hi,
I am working on a scenario in which I will send Idocs asynchronously from SAP thro a SOAP adapter to a webservice deployed on the target system.
After the Idoc data is posted in the target system,the target system will send the acknowledgement for the receipt(basically response message).How to handle this scenario?
SAP Idoc( outbound asynchronous)---> SAP XI3.0(soap adapter) ---> Target system(inbound synchronous)
Do I need to go for BPM to handle this situation?
Is there any alterantive to BPM.
If any of the forum members who have worked on the similar scenario could help me in finding a better solution,I will be thankful to them.
Thanks,
Leo

Hi Udo,
Thanks for the info.My scenario is like this.
SAP R/3 Idoc -> SAP XI 3.0 <-> Webservice in the target system.
The webservice in the target system will receive the Idoc as a request messsage and send a response message synchronously.
Since Idoc is sent asynchronously( I believe Idocs sent from SAP are always asynchronous),there is no Proxy waiting in SAP R/3 to receive the response message from the target system.
If I go for BPM for the above scenario,will the BPM steps look like the following.
1)Receive Idoc from SAP.
2)Send Idoc sysnchronously to webservice
3)Receive the response from the webservice synchronously.
4.Post the response message to a proxy which can handle it further in SAP R/3.
Please note that my knowledge in BPM is limited and correct me if I am wrong.
Thanks in advance
S.Banukumar

Similar Messages

How to get response from such a function

How to get response from such a function (in MODULE USER_COMMAND_0010 INPUT I get "ODGOVOR" 'X'
FUNCTION Z_SEENKRAT.
""Local Interface:
*" EXPORTING
*"     REFERENCE(ODGOVOR) TYPE MSEG-KZEAR
DATA ok_code LIKE sy-ucomm.
DATA: test like mseg-kzear.
BREAK-POINT.
call screen 10.
test = ODGOVOR.
ENDFUNCTION.
*&      Module CLEAR_OK_CODE OUTPUT
      text
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.                 " CLEAR_OK_CODE OUTPUT
*&      Module USER_COMMAND_0010 INPUT
      text
MODULE USER_COMMAND_0010 INPUT.
DATA odgovor LIKE mseg-KZEAR.
CASE ok_code.
    WHEN 'DA'.
    ODGOVOR = 'X'.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0010 INPUT

Hi,
You need to declare the ODGOVOR variable in the TOP include, then you will get the value
Regards
Sudheer

[SOLVED] vpnc no response from target

I have been using vpnc successfully for the past few years, but just recently discovered that I can no longer connect to any VPN from my home Arch box. I always get the message:
vpnc: no response from target
I have tried setting debug modes, but I'm not sure what I am looking for in those logs. The connection appears to hang and then the no response message comes through.
I have also tried all the suggestions here: http://prystash.blogspot.com/2009/09/vp … arget.html, but those options make no difference.
Strangely, the exact same configuration script works fine from my Arch system at work, so there must be some setting here that is causing the problem. Any ideas?
Last edited by yamad (2012-04-08 12:42:08)

Any chance that port 500 has become blocked by a (1) new firewall, (2) your router, (3) your friendly neighborhood ISP ?
http://www.gentoo-wiki.info/Vpnc

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

Monitoring responses from the System

we have created a new system and want to monitor responses from the system.
Is there any way to set up a rule when the notfication is going to be sent?
TIA

What is meant by USM? How we can use it EM grid control Rel3

IDOC :: how to send data from Custom Infotype in SAP HR to third party

Hi,
I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
Please help me in doing it.
I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
                                                                                ZTALENT                        Talent Management
5 E1PLOGI                        Header for an HR Object (Master Data or Organizational Data)
5 E1PITYP                        HR: Transported Infotypes and Subtypes for an Object
ZPUSER                         User base Data File
                ZPERSON                        Personal Information File Segment
                ZPOST                          Position File
                ZOPE                           Overall Performance
                ZPWORK                         Outside Work Experience
                ZPEDUC                         Education Details of Employee
                E1P0000                        HR: HR Master Record Infotype 0000 (Actions)
                E1P0001                        HR: HR Master Record Infotype 0001 (Org. Assignment)
                E1P0002                        HR: HR Master Record Infotype 0002 (Personal Data)
                E1P0016                        HR Master Record: Infotype 0016 (Contract Elements)
                E1P0022                        HR Master Record: Infotype 0022 (Education)
                E1P0023                        HR Master Record: Infotype 0023 (Other/Previous Employers)
                E1P0041                        HR Master Record: Infotype 0041 (Date Specifications)
                E1P0105                        HR: HR Master Record Infotype 0105 (Communications)
               ZE1P9020
                ZPLANG                         Language Details
                ZACTION                        Actions Changes
Regards,
Krishna

Hello Shankar,
         Technically TEMSE files are read by calling the following 3 function modules in sequence,
              1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
              2) RSTS_READ : read the object
              3) RSTS_CLOSE: close the object
Regards,
Rajesh

How to get response from an asynchronous BPEL process in Java

I'm experimenting with BPEL and doesn't seem to be able to get response from an asynchronous BPEL process. Here's the deal:
I have a BPEL process that takes a string as input, and gives another string as output. This is a asyncronous process.
I want to initiate this BPEL process as a web service so I generate a Webservice Proxy in JDeveloper 10g (10.1.3.0.4). The function to call the process is now called "initiate" and takes three arguments: the input string, a "org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo" and a
"org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID".
HTTP-Analyzer shows that invoking the BPEL process with initiate("somestring", null, null) results in sending a SOAP message to the BPEL process, which returns a "202 Accepted". How do I get the response from the process? My intuition tells me that I have to use that second argument, that EnpointReferenceType thing. How do I use that?
Another question: If a asynchronous BPEL process does not exists (so the endpoint does not exist) the Java proxy does not throw an error when runned. It does not even sends a message. It exits with status 0! (This happens for example when deploying a new version of a process and when the "old" version is undeployed). Calling a non-existing synchronous BPEL process, the Java proxy DOES throw an error.

Clemens,
That all sounds logical. But somehow it is still a mystery for me ... Somehow I don't see what should be done.
To call the async BPEL process I have the following procedure:
initiate(String input, org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo, org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID)
The first argument is the input for my BPEL process. The second is the address to a webservice that should handle the callback, right? The third is a messageID (makes sense, but why of the type AttributedURI?).
Here lies my problem. It is not clear to me how these EndpointReferenceType & AttributedURI work. I can't find anything on the net about it. The AXIS examples as where mentioned earlier use other types (namely the "org.xmlsoap.schemas.ws.addressing.MessageID" and "org.xmlsoap.schemas.ws.addressing.ReplyTo") which are completely different.
What I did so far:
- I created an webservice proxy that listens on the onResult endpoint of the BPEL process.
- I created an webservice proxy that calls the BPEL process through the initiate procedure, but it is not completely clear to me how to construct the EndPointreferenceType replyTo, and the MessageID. I did something like this:
EndpointReferenceType replyTo = new EndpointReferenceType();
// callback service running on local machine
// This URI class is the java.net's version
URI replyToURI = new URI("http://vaccinatie:8988/syncro-callback-context-root/stringconcatCallbackBindingPort");
// This AttributedURI is the org.xmlsoap.schemas.ws._2003._03.addressing's version
AttributedURI address = new AttributedURI();
// the only public methos that made sense to me:
address.set_value(replyToURI);
replyTo.setAddress(address);
// call the BPEL process
myPort.initiate("test123", replyTo, address);
But the above doesn't work (largely because I don't know what I'm doing here prob.:-) ) It does send the "test123" message, and the BPEL process does process it, but I don't seem to get the callback right.
I hope this makes my problems somewhat clearer. I hope someone can help me, because I'm just a beginner in this whole "web service area" and seems to do something terribly wrong here, because it should be very simple. Thx.

Call RFC for Lookup from BPM. how to determin the correct target system

Hi
I have a scenario where i am sending a sync call to SAP R/3 to fetch some sata using the BPM.
The issue is I can have multiple SAP systems so to determin the SAP system for the correct lookup is necessary.
in the rec determination step of Config I can configure multiple receivers but this isthrowing an error saying the multiple receivers cannot be determined for sync step.
Any idea why is such an error occuring
Regards
Nikhil

Nikhil,
Multiple Receivers cannot be configured for a Synchronous Interfaces. reason is that when you are sending the request message to the target systems, XI will recieve multiple responses for one request and this is aginst the concept of Synch Message Processing.
You will have to have an option of determining the receivers inside your BPM and using separate Send Steps for each of these.
Regards
Bhavesh

SAP Query: How to filter records from SAP Query output before display

Hi Friends,
Can I delete records from an SAP query basic list before it is displayed?
For example I want to delte all the orders whose system status is "RELEASED" before the basic list of that SAP query is displayed.
I have gone through SAP help and found out that we can write some code in END code section which will execute before the basic list of the query is displayed. But I could not figure out how the code this...following is an excerpt form SAP help.
"The END-OF-SELECTION code consists of two parts (Before list output and After list output). The first part is processed before the list is output and the second part afterwards."
Can anybody help me?
Regards,
Bharat.
Message was edited by:
 Bharat Reddy V

Try this simple procedure. Hope this should work for you.
You do the slection of the status in the List-Processing. say your final field of status flag is GF_STATUS.
Immediatly after that use this within the List-Processing.
CHECK GF_STATUS EQ '<RELEASED STATUS>'
How it works:
SELECT <> "<-------Query processing(system code).
*< Your code put in the List processing
CHECK GF_STATUS EQ '<RELEASED STATUS>' "< --only released records passed.
*>
ENDSELECT "<-----Query endselect(system code).
Please let me know the result.
Regards,
A.Singh
Message was edited by:
 Amarjit Singh

How to handle response.sendRedirect(url) in a portlet w/ webflow?

I am using a webflow to navigate within a portlet. There are three jsp pages or
nodes in the portlet. One of the jsp pages has the following logic:
if (A) { response.sendRedirect(url1)}
else if(B) { response.sendRedirect(url2)}
else{display rest of this jsp page}
I think I have the correct portlet urls. I used WebflowJSPHelper.createWebflowURL(...).
The problem is when it tries to redirect, the whole portlet disapears leaving
only the title bar. I check the weblogic log file and there is an exception about
RuleSetNotFoundException. Does anybody know how to handle this problem? Can
I use sendRedirect method in a portlet?
thanks,

Go to dev2dev.bea.com source code library and copy the redirect sample code in
your application domain. This program expects you to make come changes in the
portal workflow.
ciao
"Edoardo Boechat" <[email protected]> wrote:
>
Dear James,
Maybe I'll be boring, but I'll give you my expirience with "sendRedirect".
When you use sendRedirect you send back to the browser a new URL that
him will
use to obtain the content that will be exposed, in other words, It's
a client
side operation.
The portlet machanism work on the server side of the application. So
why you are
using sendRedirect? If one of that conditions happen, are you interesting
in expose
a content of another web site?
If you want to expose the content of another web site, use the wizard
to generate
a example jsp page who do this correct in a portlet and adapt the code
to your
situation.
Otherwise, you are using a wrong concept. If it's a server side operation
you
need to use "forward" or "include" operation to do what you want.
I expect be helpfull,
Edoardo Boechat.
"James" <[email protected]> wrote:
I am using a webflow to navigate within a portlet. There are threejsp
pages or
nodes in the portlet. One of the jsp pages has the following logic:
if (A) { response.sendRedirect(url1)}
else if(B) { response.sendRedirect(url2)}
else{display rest of this jsp page}
I think I have the correct portlet urls. I used WebflowJSPHelper.createWebflowURL(...).
The problem is when it tries to redirect, the whole portlet disapears
leaving
only the title bar. I check the weblogic log file and there is an exception
about
RuleSetNotFoundException. Does anybody know how to handle this problem?
Can
I use sendRedirect method in a portlet?
thanks,

How to know whether all Idocs sent perfectly or not to target System

Hi All,
We are sending the Material Master Idocs via XI and to WMS File system ( Idoc-XIFile)
How can a business user confirm that all the sent Idocs are reached to WMS by End of the day.
Is there any way to match or any report kind of thing for this please
Regards
Vamsi

HI vamsi,
Following is the solution that we are using >
1. There is a separate interface ( file to idoc )that runs at the end of the business day..
This interface will pick up a file ( from say ur WMS system) and post an idoc STATUS.SYSTAT01
the file in this case will have the idoc number of the material idoc and the status( say 11 for OK ) and the same will be mapped to idoc.
This idoc in turn will change the status of the material idoc from 03 to 11 . Then a filter can be made on this to find out which idocs did not reach status 11..
however here there are chances that this ack interface can go in error as well
2. Or u can have a separate interface ( file to Proxy ) ..here the difference would be that single file will have all the idoc numbers that were received during that day and then in the proxy u can write abap code to change the status of those idocs to say status OK
Edited by: Tarang Shah on Feb 6, 2010 8:05 PM
Edited by: Tarang Shah on Feb 6, 2010 8:06 PM
Edited by: Tarang Shah on Feb 6, 2010 8:14 PM

HELP plz..How to send response from server to client

Hi..plz help me out of this problem..i am sending request from client side to servlet..lets say i am sendin "Bechkam"..now my servlet fetches this request.n finds out that BECHKAM is a football player..now i dont want to print this on the client side..i simply want to sent this response back to the client..after client receives this response the client should print bechkam is a football player..i have done coding of sending request from client(javascript code)to server but dont kno how to send response to client..do i have to use cookies or sessions..
Any help will be greatly appreciated
THANX

I'm not sure how well versed you're with HTTP and servlets.
What you term as 'printing on the client side' is in fact the response you're looking for. The response you send from a servlet is 'printed' into the response stream. The client receives this data and interprets is according to some headers. Usually, this data is HTML/ plain text which is interpreted by the browser and rendered as required. It could very well be displayed as is.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
(Yes I know it's on JavaRanch but I think it applies everywhere)
----------------------------------------------------------------

Quick Tip: How to handle responses for fillable PDF forms | Acrobat X Tips & Tricks | Adobe TV

Learn how to view and filter responses to your fillable PDF form and how to send data from your PDF form to an Excel spreadsheet using Acrobat X Std. or Pro. You can also check for responses on Acrobat.com.
http://adobe.ly/GJAFlC

I cannot believe the quality of the Acrobat X tutorials. Why can’t they be like the ones for CS. Some balloon text boxes flash by so fast they cannot be read, timing is also an issue for other balloons.
Disappointed, If you like I can make better ones for you

How to obtain response from asyn bpel process invoked through java

I need to get the response from Asynchronous bpel process which im invoking through java using DeliveryPost method whose return type is void.

I was able to write java code for the above process
the code is here
NormalizedMessage nm = new NormalizedMessage( );
String uniqueBpelId = com.collaxa.cube.util.GUIDGenerator.generateGUID();
java.util.Map msgProps = new HashMap();
// NormalizedMessage res = deliveryService.request("OraFormsService", "initiate", nm);
//deliveryService.post(null,null,null,null);
msgProps.put("conversationId",uniqueBpelId);
nm.setProperty("conversationId",uniqueBpelId);//to set the property for this message
nm.addPart("payload",xml1);//to add to the payload of this message
deliveryService.post("OraFormsService", "initiate", nm);
// System.out.println("con1 "+IDeliveryConstants.STATE_HANDLED);
StringBuffer buf = new StringBuffer();
WhereCondition cond;
cond = new WhereCondition(buf.append(SQLDefs.IM_state).append( " = " ).append(IDeliveryConstants.STATE_UNRESOLVED ).toString() );
//cond = WhereConditionHelper.whereInstancesOpen();
IInvokeMetaData imd[] = locator.listInvokeMessages(cond);
String ids[] = new String[imd.length];
// print out the partial process information
// for processes in manual recovery status on invoke
for (int i = 0; i < imd.length; i++)
System.out.println("ConversationId=" +
imd.getConversationId());
System.out.println("ProcessId=" +
imd[i].getProcessId());
System.out.println("State=" + imd[i].getState());
ids[i] = imd[i].getConversationId();
Thanks for the Help

Any suggestions on how to print coupons from Target's website?

I am wanting to print coupons from Target's website, but they have done a poor job of supporting us Mac users. I even downloaded Firefox, as it stated that they supported Firefox 3.x for Mac; well, they don't.
Any suggestions would be greatly appreciated.
Thanks and have a wonderful weekend!

I am having the same problem and have searched relentlessly for a solution. When I try to print I get the following message:
Unfortunately, you’re trying to print to a device that is not valid for printing coupons. Please check your print setting to make sure your default printer is a standard printer and has paper. If you have a multifunction printer (fax, copy, print), please make sure that “Printer” is set as the default function on your computer.
Click the Try Again button after you’ve selected a new printer and make sure you have paper.
The first time I tried to print from the site it required that I download an applet, which I did. It's called MacCouponPrinter.dmg. I can print from other coupon sites but not Target's.
It's apparently a HUGE problem with couponers as I read probably 50 posts on various website, some of which offer solutions, but none of which have worked for me or any others as far as I can tell from the posts.
If anyone has suggestions, please chime in. Also, one more thing... It seems that the Target coupons page somehow accesses my printer directly without allowing me to go through the print dialog box to change any settings. Don't know if that's a helpful fact, but...
Thanks in advance!

SAP Idocs -How to handle response from target system

Similar Messages

Maybe you are looking for