How to get subrc in this function module

CALL FUNCTION 'FI_PERIOD_CHECK'
 EXPORTING
 I_BUKRS = 'C553'
 I_OPVAR = ' '
 I_GJAHR = it_out-datains1+0(4)
 I_KOART = 'S'
 I_KONTO = 'zzzzzzzzzz'
 I_MONAT = L_IODM
 EXCEPTIONS
 ERROR_PERIOD = 1
 ERROR_PERIOD_ACC = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
when i am testing this function module i am getting error_period_acc =2.
but i used this one in program like above code i am getting subrc=0.
i have doubt in this one is we can comment exceptions or uncomment.
i want sy-subrc <> 0.
how can i get

Try using this way
 CALL FUNCTION 'FI_PERIOD_CHECK'
 EXPORTING
 i_bukrs = cashin_header-bukrs
 i_gjahr = i_gjahr
 i_koart = 'D'
 i_monat = i_poper
 EXCEPTIONS
 error_period = 1
 error_period_acc = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
 CALL FUNCTION 'BALW_BAPIRETURN_GET2'
 EXPORTING
 type = sy-msgty
 cl = sy-msgid
 number = sy-msgno
 par1 = sy-msgv1
 par2 = sy-msgv2
 par3 = sy-msgv3
 par4 = sy-msgv4
 IMPORTING
 return = return.
 APPEND return.
 ENDIF.

Similar Messages

How to get info from calling Function Module without passing it.

Hi,
I am facing a problem like from calling function module i want values of some variables and i dont want to change the import and export parameters, is there any way to get it done...
Thanks in advance...

Hi,
It is possible only if you can find the memory id of the varibale.
You can find out it by debugging
<removed by moderator>
Edited by: Mike Pokraka on Aug 4, 2008 9:37 AM

How to make this function module as RFC to get data from different system?

Hi
I am trying to use following function module . This function module is used to copy data from one cube to another cube within same system however I need a this should happen across two different system. How can I use this function module to make it remote call to different system and do the same function what it is doing ?
Name of function module -
RSDRT_INFOCUBE_DATA_COPY
Any help would be really helpful
AG

HI,
let us say you want to copy the data of a cube in system A to a cube in system B .
1) create a RFC function module in system B (in this function module call the function module RSDRI_CUBE_WRITE_PACKAGE to update the data), this RFC function module should have same parametersa as RSDRI_CUBE_WRITE_PACKAGE .
2) write a program in system A .. read the data from the infocube using the function module RSDRI_INFOPROV_READ and call the RFC function module in system B that you have created..
for the details of the parameters to pass to these two function modules use the RSDRT_INFOCUBE_DATA_COPY and get the required code
Thanks
mahesh

How to create RFC function module and how to call this function module

Hi,
i want to know step for creating RFC function module and then How to use this function module from some other sap system.
Thnaks,
jigar

Jigar,
To implement a remote function module in ABAP, perform the following steps:
Register the module as remotely callable in the RFC server system.
In the function module Administration screen (transaction code SE37), set the field Can be called via REMOTE CALL. Registering a module as remote causes an RFC stub to be generated for it.
Write the code for the function module.
Create the destinations.....................
Displaying, Maintaining and Testing Destinations
To display, create or modify destinations, choose Tools ® Administration ® Administration ® Network ® RFC destinations or enter transaction code SM59.
Remote Destinations are stored in table RFCDES. The RFCDES table describes logical destinations for remote function calls.
It is not possible to maintain the RFCDES table directly.
You can also access logical destinations via the Implementation Guide (IMG) by choosing Tools ® AcceleratedSAP ® Customizing ® Execute Project ® SAP Reference IMG.
In the Implementation Guide, expand the following hierarchy structure:
Basis
Application Link Enabling (ALE)
Sending and Receiving Systems
Systems in Network
Define Target Systems for RFC Calls
Displaying Destinations
The initial screen for this transaction displays a tree:
Different connection types (i.e. partner systems or programs) are possible. For further information, see Types of Destinations.
To display all information for a given destination, double-click it, or place the cursor on it and press F2 .
To search for a destination, press the Find button and specify your selection. You get a list of all entries matching your selection. Place the cursor on the one you want, and press F2 or simply double-click the destination. All information for the given entry appears.
Creating Destinations
On the destinations overview screen (transaction code SM59), the connection types and all existing destinations are displayed in a tree structure.
All available connection types are explained in Types of Destinations.
To create a new RFC destination, press the Create button. A new screen is displayed with empty fields for you to fill in.
If you want to create a new destination
As you create a remote destination, you can specify a particular application server or a group of servers for a balanced distribution of system load.
For details of the destination parameters, see Entering Destination Parameters.
Changing Existing Destinations
On the destinations overview screen (transaction code SM59), the connection types and all existing destinations are displayed in a tree structure.
You can display all information for a given destination by double-clicking it or pressing F2 on it.
To change an existing destination, double-click it, or place the cursor on it and press the Change button.
For details of the destination parameters, see Entering Destination Parameters.
Testing Destinations
To test a destination, choose the appropriate function from the Test menu.
Connection (also available via the Test connection pushbutton)
Authorization (checks logon data)
Local network (provides a list of application servers)
You can use the CALL FUNCTION statement to call remote functions, just as you would call local function modules. However, you must include an additional DESTINATION clause to define where the function should run:
CALL FUNCTION RemoteFunction
DESTINATION Dest
EXPORTING
f1 =...
f2 =...
IMPORTING
f3 =...
TABLES
t1 =...
EXCEPTIONS......
The field Dest can be either a literal or a variable: its value is a logical destination (for example, "hw1071_53") known to the local SAP System. Logical destinations are defined in the RFCDES table (or the TRFCD table in R/2 Systems) via transaction sm59 or the following menu path: Tools ® Administration, Administration ® Network ® RFC destinations. You can also access logical destinations via the Implementation Guide (IMG) by choosing Tools ® Customizing ® Enterprise IMG. In the Implementation Guide, you can then choose Cross-application components ® ALE ® Communication ® Define RFC destination.
The remote function call concept, for example, allows you to access a function module in an R/2 System from an ABAP program in an R/3 System. If you want to read a customer record from your R/2 Systems database, create a remotely callable function module in the R/2 environment which retrieves customer records. Call this function from your R/3 System using a remote function call and listing the destination for the target R/2 System:
Pls. reward if useful

Save password? how the **** can I get rod of this function!!! every time I sign to a place if I wanted to safe a bloody password I would do that!!!

save password? how the **** can I get rod of this function!!! every time I sign to a place if I wanted to safe a bloody password I would do that!!!

It is the same in the latest version 7.0.2. You can shut off the saving and auto filling of passwords by clicking in the menu bar at the top Safari > Preferences and then select Autofill and uncheck the passwords box. Also check the next pane as well.

How can i use this function module

Hai
How can i use this function module /SAPHT/SALES_ORDER_READ, already apply the some parameters in this function module, but it shows the error , please tell me, how to declare the parameters in this function module ,
thanks
neelima

Hi
For a particular sales order,you have to pass the order number and the item number in the sales order.
It will display the rest of the values which u can capture them using internal tables.
Regards,
Vishwa.

How to use this function module on abap hr GET_PDSNR_RANGE

how to use this function module on abap hr GET_PDSNR_RANGE
thankx.

PASS INETRNAL TABLE WITH SOME DATA TO TABELLE FOR GENERATING PDSNR SEQUENCE

How to add "CC" field in this function module SO_NEW_DOCUMENT_SEND_API1

Hi,
I have a receiver field in this function module SO_NEW_DOCUMENT_SEND_API1.
But i wanted to add a CC field also to this.. How do i do it???
Thanks & regards,
Aswin

when you add the receiver entry in the receivers table, just make the parameter copy as 'X'. This will put the receiver in CC.
And if you want to put it in BCC use the parameter Blind copy.
Regards,
Lalit Mohan Gupta

"Set Web Site Rule" window is annoying. how do i shut off this function it poped up more than a dozen times to connect to even this web site? then i had to click it another dozen plus times to get this site open !!!! ???

when ever i put in an address or click on a site a "Set Web Site Rule" window pops up asking if i want Firefox exe to allow some function to occur. it does not seem to be security related but rather simple functions. Step 1, step 2 , blah blah . "Set Web Site Rule" window is annoying. how do i shut off this function it popped up more than a dozen times to connect to even this web site? then i had to click it another dozen plus times to get the next mozilla site open !!!! ??? if firefox does not know what it is doing how can i??????
== This happened ==
Every time Firefox opened
== i am just setting up this pc how ever i down loaded the most recent version 3.6.3

by submiter - self solved: (thanks for the psychic help)
seems the problem was not with Firefox itself. Rather it seemed to have been an ad-blocker program called "WebMonitor" . i began by deleting Firefox and then opened Explorer (which i seldom do) and the same thing began to happen with MSN. So i
began deleting anti-virus programs till i came to the above mentioned freeware ad blocker "WebMonitor". it is a shame because i uised to have a program that blocked all ads on a web site which was such a relief to me.

Getting values from a function module called in a WDA method

Friends,
I am trying to execute a function module from WDA.
I have created a service call for the function module. The function module takes values from the user, looks up the corresponding values of another field and returns the values in an internal table.
I am using the "Method Call in Used Controller" of WD Code wizard to call the function module.
When the event handler method containing the call to the function module is executed, nothing happens.
I am not sure how to pass values to the function module and to get the return values from the function module.
I am new to using function modules from WDA. Please help me out.
Thanks and Regards.

Rashmi,
Is the function module intended to collect input data from the UI and process it? - Yes
If yes, then the input (importing parameter) to the Function Module is a table of values (which should be ideally from the context mapped to the Table UI Element). - The importing parameter is a single value NOT a table and is mapped to the view context.
Now this table UI Element is bound to the view controller context , which in turn is mapped to the component controller context. And you are indeed being able to read the value of this internal table in the component controller method where the function module is being called by means of get_static_attributes_table (Is this right? - Yes, I am able to read the table of values that is passed from the component controller view to form view context by using get_static_attributes_table.
Or are you being able to read it in the event handler method of the view controller and not being able to read it in the component controller method) -
The function module takes a single value as import parameter and returns a table of values as return value.
It works fine when no importing parameter is being used and returns the table of values that is getting passed from component controller context to form view context when i am able to read it using get_static_attributes_table.
Now the question is: how to pass the import parameter value to the function module. I assumed since the importing parameter is a context node (like the return values are), i should set the value ( captured when the user enters the value in the form) to the importing parameter context attribute using set_attribute method. Since it is mapped to the component controller context, i assumed it will get passed and the method will take it as input parameter.
Let me know if my assumptions are correct regarding passing the import parameters and what is missing here.
Thanks and Regards.

Performance issue for this function-module(HR_TIM_REPORT_ABSENCE_DATA)

Hi Friends
I am having performance issue for this function-module(HR_TIM_REPORT_ABSENCE_DATA) and one my client got over 8 thousend employees . This function-module taking forever to read the data. is there any other function-module to read the absences data IT2001 .
I did use like this .if i take out this F.M 'HR_TIM_REPORT_ABSENCE_DATA_INI' its not working other Function-module.please Suggest me .
call function 'HR_TIM_REPORT_ABSENCE_DATA_INI'
exporting "Publishing to global memory
option_string = option_s "string of sel org fields
trig_string = trig_s "string of req data
alemp_flag = sw_alemp "all employee req
infot_flag = space "split per IT neccessary
sel_modus = sw_apa
importing
org_num = fdpos_lines "number of sel org fields
tables
fieldtab = fdtab "all org fields
field_sel = fieldnametab_m. "sel org fields
To Read all infotypes from Absences type.
RP_READ_ALL_TIME_ITY PN-BEGDA PN-ENDDA.
central function unit to provide internal tables: abse orgs empl
call function 'HR_TIM_REPORT_ABSENCE_DATA'
exporting
pernr = pernr-pernr
begda = pn-begda
endda = pn-endda
IMPORTING
SUBRC = SUBRC_RTA
tables
absences = absences_01
org_fields = orgs
emp_fields = empl
REFTAB =
APLTAB =
awart_sel_p = awart_s[]
awart_sel_a = awart_s[]
abstp_sel = abstp_s[]
i0000 = p0000
i0001 = p0001
i0002 = p0002
i0007 = p0007
i2001 = p2001
i2002 = p2002
i2003 = p2003.
Thanks & Regards
Reddy

guessing will not help you much, check with SE30 to get a better insight
SE30
The ABAP Runtime Trace (SE30) - Quick and Easy
what is the total time, what are the Top 10 in the hitlist.
Siegfried

How to retrieve data from a function module and use it in sap script??

I have a report program, which calls a function module. This function module internally calls an include program. In this program, I have a variable which is to be used in the sap script. How can I send this variable to the sap script

Hi,
In your case, Include prog is part of FM, no need to treat it as an Entity.
Now, Your Answer -
In SCRIPT - IN Page Window -->
 PERFORM GET_MVAT_TIN IN PROGRAM Z_SCRIPT_PERFORMS_ABAPDB3
 USING &VBDKR-KUNRE&
 CHANGING &STCD1&
 CHANGING &STCD2&
 ENDPERFORM
 IF &STCD1& <> ' '
 MVAT Number :</> &STCD1&
 ENDIF
Then go to SE38 --> Creat prog with type - Subroutine pool
In that Write FORM statement for this PERFORM.
FORM get_mvat_tin TABLES inttab STRUCTURE itcsy
 outtab STRUCTURE itcsy.
DATA : v_kunre TYPE kna1-kunnr,
 v_stcd1 TYPE kna1-stcd1,
 v_stcd2 TYPE kna1-stcd2.
LOOP AT outtab.
 CLEAR outtab-value.
 MODIFY outtab.
ENDLOOP.
READ TABLE inttab INDEX 1.
v_kunre = inttab-value.
IF v_kunre CA sy-abcde.
ELSE.
 UNPACK v_kunre TO v_kunre.
ENDIF.
 " Here You can take your Funcion module ***************************
SELECT SINGLE stcd1 stcd2 FROM kna1 INTO (v_stcd1, v_stcd2)
 WHERE kunnr = v_kunre.
IF sy-subrc = 0.
 READ TABLE outtab INDEX 1.
 WRITE v_stcd1 TO outtab-value.
 MODIFY outtab INDEX 1.
 READ TABLE outtab INDEX 2.
 WRITE v_stcd2 TO outtab-value.
 MODIFY outtab INDEX 2.
ENDIF.
ENDFORM.

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

How to add Image in "SX_OBJECT_CONVERT_OTF_PDF" Function module

Hi,
We have scenario to add a BMP image from report to PDF format ,they are using the SX_OBJECT_CONVERT_OTF_PDF function module to generate the report in PDF ,so we want to know how to add a image(BMP) for this function module or is there any other function module to get the image in PDF format.
Replies would be appreciated.
Regards
Raghava

Hi Brad Bohn ,
We have the scenario were in we have two tabs (If click first tab output is displayed in excel with image using OLE functionality) for second tab output is displayed in PDF by using SX_OBJECT_CONVERT_OTF_PDF-Function module without the image(*.bmp).
Our requirement is to get image in PDF.
Please let us know which is the way to approach this scenario.
Regards,
Raghava

How to add a created Z function module to the existing list in WE21

Hi all,
There is some existing function modules ( like EDI_PATH_CREATE_CLIENT_DOCNUM ) in WE21 in the function module field.
here, i need to create one Z function module as per user requirement & want to add to that list. is it possible???
actually, i want the file name format is like
" Document Number_YYYYMMDDHHMMSS.xml ". but existing function modules are not giving this format.do anybody give any idea.
correct answers will be rewarded.
Thanks & Regards

HI Pabitra,
Yes, can always change the existing fm and add it with message type as follows pls note step 7 and step 8. (for inbound it is we42 and for outbound it is we41 )
Basic IDOCs have supplied by SAP with standard structure. (Segments). You can extend them with your own segments.
IDOCs does have unique number. They contain control, data, and status records.
Useful Transaction Codes:
WEDI : IDoc Menu
WE02 : IDoc List (can enter IDoc number to select on)
WE05 : IDoc List
WE19 : Transaction WE19 can be used to test the IDoc
WE30 : IDoc Type Development: Initial Screen
WE31: Development Segments: Initial Screen
WE60 : Documentation for IDoc Types. This allows you to view the IDoc you have created.
WE81 : Display View EDI: Logical Message Types: Overview
WE82: Display View Message Types and Assignment to IDoc Types: Overview
WE21 - Creation of POrt
WE20 - Partner Profile creation
SALE - ALE (Application Linking and Enabling) settings
For Outbound ALE Configurations: (Example)
IDoc definitions and necessary ALE configurations settings for the outbound .
Create Idoc segments Transaction WE31.
Create Idoc type Transaction WE30.
Create Message Type Transaction WE81.
Assign Message Type to Idoc type Transaction WE82.
Create a distribution Model - Transaction BD64
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
for creating a IDOC
see the below steps for outbound processing IDOCS..
2.1 Outbound Interface
PROCESS DIAGRAM
Outbound Interface
1. Analyse Hierarchy Levels
2. Create New segment
3. Create New IDoc Type
4. Create New Message Type
5. Link Message with IDoc Type
6. Create an entry in EDP13 via transactions WE20 and BD64
7. Populate the Custom IDoc via ABAP Program
7b Error Handling
7c. Send Status Email
8. Test the Population of the Custom IDoc
Step 1 Analyse Hierarchy Levels:
Analyse the data relationships being processed in the interface. Define the appropriate hierarchical Parent-to-Child relationships.
Navigate to transaction code WEDI
Transaction WEDI displays the IDOC main menu. This allows navigation around the various development and control areas to create a customised IDOC.
Step 2 Create a new segment:
via wedi : Development - IDOC Segments or Transaction code WE31.
Enter segment name and click on Create.
The? name of the segment type must start with Z1 , and have a maximum of eight characters.
Enter description and enter the relevant field names and data elements.
The segment should represent a structure in the program so for? each field in the segment a field name and a data element must be defined.
Save the segment and enter Person Responsible and Processing Person .
Go to Edit and Set Release.
Repeat this procedure for each new Segment in the IDOC.
Step 3 Create a new IDOC Type
via wedi Development - IDOC Types or Transaction WE30.
Enter segment name (starting with Z), click on Basic Type and then Create.
Create as new, enter Person Responsible and Processing Person and enter description.
On Create Basic Type screen decide where segments should be inserted and go to Edit/Create Segment.
Complete relevant fields in the Maintain Attributes screen:
From the relevant segments created in Step 2 enter the Segment type and if mandatory segment.
The Minimum and Maximum number of segments to be allowed in the sequence. (One minimum and one maximum if segment is mandatory).
The Parent Segment and Hierarchy Level will be automatically created depending on where in the IDOC tree you decided to create that particular segment.
Repeat this process for each segment needed in the IDOC type, deciding whether to add the next segments at the same level or as a Child.
When IDOC created return to initial screen. Go to Edit and Set Release.
Go to Transaction WE60 to view the IDoc Type you have created.
Step 4 Create new Message Type
via wedi Development - Message Types or Transaction WE81.
Display/Change and click on New Entries
Create a new Message Type and Save.
Step 5 Link Message Type to IDOC Type
via wedi Development - IDOC Type/Message or Transaction WE82.
Display/Change and then click on New Entries.
Enter Message Type, Basic Type (IDOC Type) and Release (46C) and Save.
Step 6 Create an entry in EDP13 via transactions WE20 and BD64.
The partner profile for the Idoc must be set up and generated in the transaction BD64 and transaction WE20.
WE20 Add Message Type to appropriate Partner Type, Enter Message Type, Receiver Port and Idoc Type and Save.
BD64 Create a Model View, Enter Sender and Receiver Ports, Attach Message Type. Go to Environment on Menu and click on Generate Partner Profiles and generate (not save) profile.
Step 7 Populate the custom IDOC via ABAP Program
See Test Program ZOUTBD_IDOC_TEMPLATE, Appendix IV.
Create an Internal Table for each segment type, this should be exactly the same structure as the segment type.
The control record is filled into a structure like EDIDC. The message type and the Idoc type for the Idoc must be populated into the eddic structure.
- PERFORM populate_Control_structure USING c_mestyp
c_SEGMENT_type1.
The data segments are filled into a structure like edidd-sdata; sdata and the segment name are populated into the edidd structure.
- PERFORM transfer_Parent_data_to_seg.
The standard SAP function module MASTER_IDOC_DISTRIBUTE is called to pass the populated IDOC to the ALE Layer.
- PERFORM master_idoc_distribute.
NOTE: This function module is only called for stand alone programs and Shared Master Data programs (SMD). It is not called when using extensions or output determination.
The ALE Layer handles the sending of the IDOC to the receiving system.
Error Handling (see Step 7b).
Commit work.
Project SpecificStep 7b Error Handling
Analyse which fields in the interface are mandatory for the receiving system and who needs to receive error notification.
Declare a structure of type MCMAILOBJ for sending instructions.
Enter values for the internal table based on structure MCMAILOBJ
For selection processes, on SY-SUBRC checks and where fields are mandatory for the receiving system; insert Function Module MC_SEND_MAIL.
Enter values in the following parameters: -
MS_MAIL_SENDMODE = B (Batch Mode)
MS_MAIL_TITLE = 'Mail Title'
MS_MAIL_DESCRIPTION = Error description (e.g. MATNR not given)
MS_MAIL_RECEIVER = Name of Receiver (To be determined)
MS_MAIL_EXPRESS = E (Express Delivery)
MS_MAIL_DLINAME = Leave Blank
MS_MAIL_LANGU = 'E' (Language)
MS_MAIL_FUNKOBJ_NAME = Leave Blank
TABLES
MS_MAIL_CONT = I_MCMAILOBJ
Note:
It has to be determined separately for each interface how these errors and mail notifications are to be grouped dependant upon the number of errors that are potentially likely. One possible approach is to send an email for each reason for rejection and include all the records that failed for that reason in the mail notification. Another possible approach is to send an email for every failure.
When error checking for mandatory fields it is common SAP practice to reject a record on its first failure (irrespective of subsequent errors in that record)
Step 7
(Transaction WE57)
Assign the custom function module to the IDoc type and the message type.
Set function module to type F and direction 2 for inbound.
Step 8
(Transaction WE42)
Create a new process code and assign it to the function module. The process code determines how the incoming IDoc is to be processed in SAP.
Step 9
(Transaction BD67)
Assign the function module to the process code created above. Got to New Entries and enter the process code and the function module name.
Step 10
(Transaction WE20 and Transaction BD64)
Create a partner profile for your message and ensure that in transaction WE20 the process code is the one that points to your function module. (See step 6 of creating Outbound Idocs).
Step 11
Ensure that error handling functionality is present.
If u still have doubt, i can send u the print screen doc - hope this helps u
Reward pts if found usefull :)
regards
Sathish

How to get subrc in this function module

Similar Messages

Maybe you are looking for