How to get tables used by a Function Module

Hi,
How to know the tables used by a function module dynamically.
Cuurently im using BAPI_MATERIAL_SAVEDATA in my report program.
I tried FM GET_TABLES to know the tables, but could see only tables used in the report.
Main issue in my case is when im running this update program, could observe different tables being displayed as updated in SM50(Process Overview).Want to clarify as why these tables which are not being used in my report are being displayed in SM50.
So was doubtin weather this FM is using these displayed tables.
Thanks in advance for u r replys.
Regards,
Dedeepya

Hi Dedeepya,
you could use a SQL Trace (tx. ST05) to list all tables affected and operations that realize. Just active the trace, execute FM, and Deactive trace. Then click in "Display trace" and check it.
Best regards,
Pablo

Similar Messages

How to get sysnr value in a Function Module

Hi all,
I need to get the sysnr(system number) value of the R/3 system. I execute a RFC function module and need to get the value of sysnr of the system it executes in as a return parameter. Can somebody tell me how to get this value in the function module and return it.
Thanks and Regards,
Pratik

Hello Pratik
The system number has to be defined in the RFC destination. Thus, select on your local system (where you call the RFC function module) the corresponding RFC destination from table <b>RFCDES</b>. In field RFCDES-RFCOPTIONS you will find a string like this:
H=<ip address>,S=21,R=N, ...
S=system number
Regards
Uwe

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

Hi out there. To capture a screen shot one uses: Command-Shift-3 or 4. I have done this for a long time. Now suddenly neither screen shot works anymore. Suggestions how to get this useful function back? Thanks, Georgx

Hi out there. To capture a screen shot one uses: Command-Shift-3 or 4. I have done this for a long time. Now suddenly neither screen shot command works anymore. Suggestions how to get this useful function back? Thanks, Georgx

Command-Shift-3 and 4 works just fine on several Macs that I have here.
Try restarting your Mac....or post in the specific support area for your Mac model....for more advice.
https://discussions.apple.com/index.jspa

How to get table headers in jsp page

hi,
this is praveen, can any one help me to solve this problem.
how to get table headers in a jsp page. whether it is possible using javascript or is there any other way.
pls send rep.
thank u.

Hai ,
I Think This will help ful for u check it ,
File=new FileLog("f:/WebServiceTrace/trace2.%g.log", 800000, 10,                                        new TraceFormatter());
The above code specifies the path for your log file.
Then add this file as a log location and then log the traces. For this you can use the following code like:
Location location=Location.getLocation(className);
          location.addLog(file);
          location.setEffectiveSeverity(Severity.ALL);
          location.entering(methodName);
To Create j2ee apllication
In path new-j2ee-jsp to create JSP's can only be used for J2EE applications.
So as you are using this in Portal Application, this does not work.
You can test this bahavior by creating a new Web Application (New-Project-J2EE-Web Module Project)
In this Web Module Project, try creating JSP, this will work.
So dont use new-j2ee-jsp to create JSP in Portal Application instead use New-File and name the file as jsp.
Regards ,
venkat

In ABAP HR how to get job using position

In ABAP HR how to get job using position (Using Infotype 1001)

Hi anilkumar,
1. u have the position
   u want the Job
2. In hrp1001 table
   OTYPE = 'S' (for position)
   OBJID = POSITION (AS ABOVE)
   SCLAS = 'C' (for finding job)
<b>   SOBID = XXXXXX (here u will get the JOB)</b>
regards,
amit m.

How to do data source ehancement by using "Extraction by function module"

I have one customized datasource "ZSOURCE" in R/3, this datasource use Extraction by function module, namely one functiona
module "ZBI_FM_EX"and Extract. struct "ZBI_EX".
Now I want to add one field "ZNEW" from standard SAP table LIKP into extractor "ZBI_EX" and write coding in ZXRSAU01.
Question, could I add new field "ZNEW" into Structure:"ZBI_EX"? Do I need to change anything in functional module "ZBI_FM_EX" itself?
Many Thanks!
rajatina.

Hi Dear,
It is good to write the code in your function module i.e. ZBI_FM_EX. becuase writing the code in ZXRSAU01 include program will affect the loading performance. instead of looping the data two time (one in your FM and again in ZXRSAU01 ), you can get the same will only loop.
Thanks
Obaid
Edited by: obaid shaikh on Jan 21, 2011 11:53 AM

How java gets objet collections from DB function

This is database function. my question is how java get those values from the function.
Could you please post some sample code also?
CREATE OR REPLACE
Type T_PREO_RoleINFO is Object
ROLE_ID NUMBER(10),
ROLE_NAME VARCHAR2(20))
CREATE OR REPLACE
TYPE T_RoleInfo IS TABLE OF PREORDER.
T_PREO_RoleINFO
Function F_GetUserRole(Userid in number)
return T_RoleInfo as
V_Role T_RoleInfo;
begin
     select T_PREO_RoleINFO(PREO_Role.ROLE_ID,PREO_Role.ROLE_NAME)
     BULK COLLECT INTO V_Role
     from preorder.PREO_Role, preorder.PREO_User_Role
     where PREO_Role.Role_id = PREO_User_Role.Role_id
     and PREO_User_Role.user_id = userid;
     return V_Role;
end;

check this out
http://www.experts-exchange.com/Programming/Programming_Languages/Java/Q_20878677.html

How to declare Dynamic table in Tables Parameters of a Function Module...

Hi Gurus,
I would like to Know how to declare a Dynamic table in Tables parameters of a Function Module.
so that it should be able to hold any table data ....
I have tried all possible ways of trying to assign fields-symbol like declarations which doesnt allow here ...
plz Dont reply with the basics of creating dynamic internal tables, coz my case is not an Internal table it is FM table parameter declaration.....

Hi,
If you are requirement is to create a function module with tables parameter having a generic line type i.e. no specific line type
just declare it with a name under Parameter name with out specifying the type.
A reference function module with such parameter, i would quote is the standard GUI_UPLOAD/ GUI_DOWNLOAD where the parameters specified under TABLES are generic.
If you want to process the values passed to these parameters in the source code of function module, field symbols would be a preferable option.
Regards,
Sharath Panuganti

How to get response from such a function

How to get response from such a function (in MODULE USER_COMMAND_0010 INPUT I get "ODGOVOR" 'X'
FUNCTION Z_SEENKRAT.
""Local Interface:
*" EXPORTING
*"     REFERENCE(ODGOVOR) TYPE MSEG-KZEAR
DATA ok_code LIKE sy-ucomm.
DATA: test like mseg-kzear.
BREAK-POINT.
call screen 10.
test = ODGOVOR.
ENDFUNCTION.
*&      Module CLEAR_OK_CODE OUTPUT
      text
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.                 " CLEAR_OK_CODE OUTPUT
*&      Module USER_COMMAND_0010 INPUT
      text
MODULE USER_COMMAND_0010 INPUT.
DATA odgovor LIKE mseg-KZEAR.
CASE ok_code.
    WHEN 'DA'.
    ODGOVOR = 'X'.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0010 INPUT

Hi,
You need to declare the ODGOVOR variable in the TOP include, then you will get the value
Regards
Sudheer

How to get image using Http and how to save in Smulator

Hi guys,
Am working in black berry bold. i dont know how to get image using htp connection and one more thing i need to save this image in side simulator directory............. what are the specific API i should...
Guide me.........

If you want the input image size you need to pass it in as parameters.
A discussion thread on this topic is:
http://forums.adobe.com/thread/29948
-- Daniel R. <[email protected]> http://danielr.neophi.com/

How to capture error message from standard function module

Dear friends
when i execute standard function module in finance , i am getting error message , pls check the below screen shot,
how to capture the below error message so that i have display in my webdynpro component
Thanks
Vijaya

Hello Vijaya,
Incase of BAPI's they have a return table parameter T_RETURN. Just read that return table to get the error message.
Incase of normal function modules, there will be exceptions raised for the message used inside the function module. Just read the sy-subrc after the FM and based on the sy-subrc value find the respective exception raised.
May be you can try like this, whenever the message is raised it will be stored in the system variable.
CALL FM.
check for the system variables.
sy-msgid = Message ID of the latest message raised.
sy-msgno = message number of the latest message raised.
sy-msgty = message type of the latest message raised.
sy-msgv1 = variable1 of the latest message raised.
sy-msgv2 = variable2 of the latest message raised.
sy-msgv3 = variable3 of the latest message raised.
sy-msgv4 = variable4 of the latest message raised.
Regards,
TP

Using of SXPG_COMMAND_EXECUTE Function Module.

I am using the below Function Module
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
    EXPORTING
      commandname                   = p_cmnd
      operatingsystem               = syst-opsys
      targetsystem                  = w_target
      stdout                        = 'X'
      stderr                        = 'X'
      terminationwait               = 'X'
    IMPORTING
      status                        = w_status
      exitcode                      = w_exitcode
    TABLES
      exec_protocol                 = t_protocol
    EXCEPTIONS
      no_permission                 = 1
      command_not_found             = 2
      parameters_too_long           = 3
      security_risk                 = 4
      wrong_check_call_interface    = 5
      program_start_error           = 6
      program_termination_error     = 7
      x_error                       = 8
      parameter_expected            = 9
      too_many_parameters           = 10
      illegal_command               = 11
      wrong_asynchronous_parameters = 12
      cant_enq_tbtco_entry          = 13
      jobcount_generation_error     = 14
      OTHERS                        = 15.
WRITE :/ 'SY-SUBRC      = [', sy-subrc ,']'.
WRITE :/ 'STATUS        = [', w_status ,']'.
WRITE :/ 'EXITCODE      = [', w_exitcode ,']'.
WRITE :/ 'EXEC_PROTOCOL ='.
But By using the above function module I am getting the SY-SUBRC as equal to '1' and in the import parameters w_status getting as BLANK and T_PROTOCOL as Blank so it is raising the "Problem in executing UNIX command." in my program. Can anybody suggest how can i rectify this problem.
Thanks in Advance.

> no_permission = 1
Seems like an authorization problem. Call SU53 immediatly after the failed function call and check with your security or system administrator (authorization object S_LOG_COM).
Thomas

Doubt in export, import and table para when creating Function Module

Dear fellow ABAPers,
I have a doubt in defining export, import and table parameter while creating a function module.
I am calling a function module inside a user exit. Now in the user exit the SAP fills an internal table called i_lfa1 with all the data user has eneterd.
Now I want to pass this whole internal table to function module and the perform some checks on the values of internal table.
After that function module fills an error structure with values depending on some check.
1)
How do I pass this internal table to function module ?
When I am creating function module in se37 where do I define this iternal table type ? Is it in Import or Table parameter during function module creation?
2)
Where do I define error structure type (which is returned by function module to main program)? Is it in Export or table parameter during function module creation?
Please clear my doubt..
Relevant points will be awarded.
Regards,
Tushar.

Hi Tushar,
1. How do I pass this internal table to function module ?
   I assume u are creating your own Y/Z FM.
   Pass it thru TABLES parameter.
2. When I am creating function module in se37 where do I define this iternal table type
   Define this in TABLES interface.
   What Type ?
   THE SAME TYPE WHICH HAS BEEN DEFINED
    WHILE PASSING IN THE USER-EXIT FUNCTION MODULE.
   IF U SEE THE FM OF THE USER-EXIT,
   U WILL COME TO KNOW.
3.
Where do I define error structure type (which is returned by function module to main program)? Is it in Export or table parameter during function module creation?
Define it in TABLES interace. (not in export, import)
(Since what u are going to return is an internal table)
U can take for eg. BDCMSGCOLL.
OR u can create your own Y/Z structure
for the same purpose.
(or u can use the structure type T100)
I hope it helps.
Regards,
Amit M.

How to create a generic datasource from function module?

Dear experts,
I have created a generic datasource from function module. For this extrator, I created a function module and a structure.
I have now some difficulties to continue:
In this function module, i get data from different transparent tables. Then i put these data into an internal table.
I just don't know what is the relatioin between the structure i defined and this internal table.
I should make "iTab structure AA" in the source code?
Thanks

Hi..
check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " XXXX " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
.Create a function group .
. Structure ZTXXXX
Create function module (i.e. ZTESTXXX) .
. Create the data source using transaction (RSO2).
. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter .
Test the datasource in R/3 using transaction RSA3.
Transfer the data source to BW System and replicate it in the BW-System.
Message was edited by:
shiv

How to get tables used by a Function Module

Similar Messages

Maybe you are looking for