How to get that high-tech look from access connections

how do i get that
Message Edited by rachelroth on 07-21-2009 12:33 PM
Solved!
Go to Solution.

figured it out THANK YOU VERY MUCH FOR HELPING its version 5.30 
Message Edited by rachelroth on 07-21-2009 12:36 PM

Similar Messages

  • How to get Driver and url names from a connection pool

    Hi,
    How to get the DriverName and URL from an existing pool, If I know the name of
    connection pool ? Is it possible to know the name of related pool , if I know
    the name of datasource?
    Thx
    Manish

    hi
    there are 2 ways:
    url must be: jdbc:weblogic:pool[:connectionPoolID]
    or
    jdbc:weblogic:jts[:connectionPoolID] (if you want to use jts with your JDBC connection.)
    see http://e-docs.bea.com/wls/docs60//javadocs/weblogic/jdbc/pool/Driver.html
    However, I think it is safer to configure and use DataSource to get connection.
    Nicolas
    "kumar" <[email protected]> wrote:
    >
    Hi,
    How to get the DriverName and URL from an existing pool, If I know the name
    of
    connection pool ? Is it possible to know the name of related pool , if I
    know
    the name of datasource?
    Thx
    Manish

  • I have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in  finder

    i have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page to get back to previous page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in  finder

    Hi..
    I repled to you here >  https://discussions.apple.com/message/25598596#25598596
    Please do not start duplicate topics. It makes it that much harder to assist you.

  • Recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step

    recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step instructions xoxoxo
    And my iTunes sign in is also screwed up... It is underneath my friends email (the one with my backed up data on his Mac laptop) HOW DO I CHANGE THIS SO THAT I CAN DOWNLOAD APP's again...

    I suspect unless he had some items in iCloud backup then they are gone.  Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

  • I am using the window xp and firefox 6. I see many videos on youtube. How I get that videos from the catch folder and where is it?

    I am using the window xp and firefox 6.
    I watch the youtube videos online.
    How I get that video from the catch folder and where that catch folder are situated in the window xp.

    ''How can I view or retrieve a video from Firefox's cache''
    To actually view/retrieve the file from the cache and its web address you can use
    the "Cache Viewer" extension 32.8KB
    * https://addons.mozilla.org/firefox/addon/cacheviewer/
    * http://dmcritchie.mvps.org/firefox/firefox.htm#cacheviewer
    For you to be able to view the cached file you would have had to have watched the entire file.
    The latest version of the extension is 0.7b available in all versions you would have to override compatibility by any of these methods
    * checking or pick up one of the xpi versions in the reader comments for Firefox 6.0
    * extensions.checkCompatibility.6.0 set to False
    *: http://kb.mozillazine.org/Extensions.checkCompatibility
    * or with an extension "Add-on Compatibility Reporter" (84.0 KB) seems preferred in this group
    *:https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
    There are also extensions such as Video downloader 132.8 KB
    * Download YouTube Videos + Flash Video Downloader / Download-Helper
    *:https://addons.mozilla.org/firefox/addon/download-youtube-videos/
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem after you've tried several things.</small>

  • How to get the backup of photos from  i cloud id ?

    plz provide me the answers as soon as possible.

    BALAJI_PRASANNA wrote:
    Hello,
    I am very new to Labview. Í have an image of an LED and wanted to find the luminance value. I got the luminance image from the IMAQ ExtractSingleColorPlane but the value is not displaying. I just wanted to know how to get the value of luminance from the IMAQ ExtractSingleColorPlane. I have attached what i have done below.
    Thanks in advance.
    Before learning about LabVIEW, learn about images.  An Image (in LabVIEW) is a "representation of an image", that is, the wire itself doesn't really have a "value", but "points to" a collection of data that can be "imaged" (i.e. looked at as through it were a picture), "manipulated" (for example, extracting a color plane, basically getting the "red channel", an image looking as through it were viewed through a red filter), and possibly returning arrays of numbers representing the intensity of the light at a certain position in the picture.  
    BS

  • I broke my iPhone 5 now using a 4 but don't know if or how to get my photos ect..from the 5 to the 4.can I do this and how plse help

    I broke my iPhone 5 now using a 4 but don't know if or how to get my photos ect..from the 5 to the 4.can I do this and how plse help

    Restore the backup of your iPhone 5 to your iPhone 4.  It will contain your camera roll photos. 
    To do this, first make sure the iPhone 4 is running the same or higher version of iOS as your iPhone 5 was.  If it isn't, you'll need to update it first.  Then, to restore the iCloud backup, you'll have to begin by erasing the iPhone 4.  If you have any newer data on the iPhone 4 that is not contained in the iPhone 5 backup, you'll need to save that first.  When you're ready, go to Settings>General>Reset, tap Erase All Content and Settings, then go through the set screens on the iPhone 4 and when given the option, choose Restore from iCloud backup and follow the prompt, choosing the backup of your iPhone 5 to restore to.  Be sure it is connected to wifi and your charger as it is restoring the backup.

  • How to get "Layer Mask Hides Effects" from Photoshop Plug-in

    How to get "Layer Mask Hides Effects" from Photoshop Plug-in.

    I don't think there's enough information here to give an answer.  Is this a Plug-in that you're writing or intend to write?  If so, what type of Plug-in is it?
    If you are writing your own plug-in, the header files included in the Photoshop SDK/API have a bunch of defines for the proper codes to use.
    PITerminology.h has a large amount of keys that can be used to query for information.  PIUGetInfo is probably the function that you want to call to determine what you need to know.
    If you're looking for information about a specific layer, you will want to make a new PIActionDescriptor, call sPSActionDescriptor->Make(*PIActionDescriptor), and then call GetLayerInfo on the layer that you're querying information about.
    You can then call sPSActionDescriptor->Get<datatype> on the layer while passing in the key of the data that you want.

  • How to get the byte[] size dynamically from the StreamMessage object

    Hi all,
    Using JMS, I am receiving the FDF file as StreamMessage from the queue and attaching it to the PDF file which is present in the local system.
    For that, I have written the code as follows:
    {color:#0000ff} Message msg = jmsTemplate.receive();
    if(msg !=null && msg instanceof StreamMessage)
    StreamMessage message = (StreamMessage) msg;{color}
    {color:#ff6600}//hardcoded the byte array size value
    {color}{color:#0000ff} byte[] bytes = new byte[{color:#ff0000}856{color}];
    System.out.println("read msg="+message.readBytes(bytes));{color}
    {color:#0000ff}PdfReader pdfreader = new PdfReader("D:\\Managing_Workflows_No_Comment.pdf");
    PdfStamper stamp = new PdfStamper(pdfreader, new FileOutputStream("D:\\12345.pdf"));
    FdfReader fdfreader = new FdfReader(bytes);
    stamp.addComments(fdfreader);
    {color} {color:#0000ff} stamp.close();
    {color}{color:#000000}The above code is working fine except with the hardcoded of {color:#ff0000}byte array{color}{color:#ff0000} size value{color} which is given in {color:#ff0000}RED{color} in color.
    Can anybody know, {color:#000000}*how to get the byte[] size dynamically from the StreamMessage*{color} object ?
    Any help would be highly beneficial for me !!!!
    Thanks and Regards,
    Ganesh Kumar{color}

    When you create your stream message you could add an property to your message, something like streamSize that would contain the number of bytes in your stream message. Then you could get this property from the message before declaring your array.
    Tom

  • How to get rid of the other from the MacBook Air Memory?

    How to get rid of the other from the MacBook Air Memory? I reviewed my newly purchased MBA ear;y 2014 i7 8GB RAM and there was 24+ GB of "Other". I have Yosemite. I have restored to factory with no luck. is there a memory cleaner or process to eliminate what is not needed in Other? I know some files there are settings, and such but not 24+ GB worth is such of stuff.

    About “Other”:
    http://support.apple.com/en-us/HT202867
    Go step by step and test.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Backup your computer.
    3. Empty Trash.
       http://support.apple.com/kb/PH13806
    4. Disk space / Time Machine ?/ Local Snapshots
      Local backups
       http://support.apple.com/kb/ht4878
    5. Delete old iOS Devices Backup.
        iTunes > Preferences > Devices
        Highlight the old Backups , press “Delete Backup” and then “OK”.
        http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
    6. Re-index Macintosh HD.
        This will take a while. Wait until it is finished.
        System Preferences > Spotlight > Privacy
        http://support.apple.com/kb/ht2409
    7.Try OmniDiskSweeper. This will give the storage size details of the items.
       https://www.omnigroup.com/more
       Select Macintosh HD and click  “Sweep Selected Drive” at the bottom.
       Be careful. Delete only the files that can be safely  deleted. If you are not sure about any file, don’t touch it.
    8. Move iTunes, iPhoto and iMovie media folders to an external drive.
        iTunes
        http://support.apple.com/en-us/HT201562
        iPhoto
        http://support.apple.com/kb/PH2506
        iMovie
        http://support.apple.com/kb/ph2289

  • I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

    I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

    The only option is to wipe the device clean and restore it to factory settings.  Hope you have a backup.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • How to get the default selection color from JTable

    Hi, there,
    I have a question for how to get the default selection color from JTable. I am currently implementing the customized table cell renderer, but I do want to set the selection color in the table exactly the same of default table cell renderer. The JTable.getSelectionBackgroup() did not works for me, it returned dark blue which made the text in the table unreadable. Anyone know how to get the window's default selection color?
    Thanks,
    -Jenny

    The windows default selection color is dark blue. Try selecting any text on this page. The difference is that the text gets changed to a white font so you can actually see the text.
    If you don't like the default colors that Java uses then use the UIManager to change the defaults. The following program shows all the properties controlled by the UIManager:
    http://www.discoverteenergy.com/files/ShowUIDefaults.java
    Any of the properties can be changed for the entire application by using:
    UIManager.put( "propertyName", value );

  • How to get password as string back from encrypted password byte array.

    Hi All,
    I am storing encrypted password and enc key in the database.(Code included encryptPassword method for encryption and validatePassword method for validating of password). Problem is that for some reason i need to show user's password to the user as a string as he/she entered. But i am not able to convert the encrypted password from D/B to original String.
    Tell me if any body know how to get the string password back from the encrypted password byte array after seeing my existing encryption code.
    //********* Code
    private Vector encryptPassword(byte[] arrPwd)
    try
    // parameter arrPwd is the password as entered by the user and to be encrypted.
    byte[] encPwd = null;
    byte[] key = null;
    /* Generate a key pair */
    KeyPairGenerator keyGen = KeyPairGenerator.getInstance("DSA", "SUN");
    SecureRandom random = SecureRandom.getInstance("SHA1PRNG", "SUN");
    keyGen.initialize(1024, random);
    KeyPair pair = keyGen.generateKeyPair();
    PrivateKey priv = pair.getPrivate();
    PublicKey pub = pair.getPublic();
    /* Create a Signature object and initialize it with the private key */
    Signature dsa = Signature.getInstance("SHA1withDSA", "SUN");
    dsa.initSign(priv);
    /* Update and sign the data */
    dsa.update(arrPwd, 0, 12);
    /* Now that all the data to be signed has been read in, generate a signature for it */
    encPwd = dsa.sign();
    /* Now realSig has the signed password*/
    key = pub.getEncoded();
    Vector vtrPwd = new Vector(2);
    vtrPwd.add(encPwd);
    vtrPwd.add(key);
    return vtrPwd;
    catch (Exception e)
    private boolean validatePassword(byte[] arrPwd,byte[] encPwd,byte[] key) throws RemoteException
    try
    // arrPwd is the byte array of password entered by user.
    // encPwd is the encrypted password retreived from D/B
    // key is the array of key through which the password was encrypted and stored.
    X509EncodedKeySpec KeySpec = new X509EncodedKeySpec(key);
    KeyFactory keyFactory = KeyFactory.getInstance("DSA", "SUN");
    PublicKey pubKey = keyFactory.generatePublic(KeySpec);
    /* Encrypt the user-entered password using the key*/
    Signature sig = Signature.getInstance("SHA1withDSA", "SUN");
    sig.initVerify(pubKey);
    /* Update and sign the password*/
    sig.update(arrPwd, 0, 12);
    return sig.verify(encPwd);
    catch (Exception e)
    Help upto any extent would be appreciated.
    Thanx
    Moti Singh

    Hi All,
    I am storing encrypted password and enc key in the
    database.(Code included encryptPassword method for
    encryption and validatePassword method for validating
    of password). Problem is that for some reason i need
    to show user's password to the user as a string as
    he/she entered. But i am not able to convert the
    encrypted password from D/B to original String.No, you are not encrypting the password in your code, you are merely signing it.
    Tell me if any body know how to get the string
    password back from the encrypted password byte array
    after seeing my existing encryption code.It is impossible to retrieve the original text out of a signature.
    You should read up on some encryption basics in order to understand the difference between signing and encrypting. Then you can find examples of how to encrypt something here: http://java.sun.com/j2se/1.4/docs/guide/security/jce/JCERefGuide.html.
    Actually there is one class specifically for keeping keys secure, KeyStore http://java.sun.com/j2se/1.4/docs/api/java/security/KeyStore.html
    - Daniel

  • How to get list of file names from a directory?

    How to get list of file names from a directory?
    Please help

    In addition, this:
    String filename = files;Should be this:
    String filename = files;
    That's just because he didn't use the "code" tags, so [ i ] made everything following it become italicized.                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999..

    anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999.. many thanks :-)

    They show in the camera roll, just not your computer?
    Have you checked every folder that is in the DCIM folder?

Maybe you are looking for