How to get the image in docking control in a report using doc management

HI All
My question is that is that i am storing one image using documents in jha2n.
Now I want to get that image in report using Document management.
Pls guide how to proceed as I am new and dont know anything about document management.
Thanks
Pooja

Hi,
Please kindly refer to the online help link below:
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/973035624811d1949000a0c92f024a/frameset.htm|http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/973035624811d1949000a0c92f024a/frameset.htm]
And for handling the DMS document, you may check the BAPIs in SAP Note: 504692
Function group: CVBAPI
BAPI_DOCUMENT_GETDETAIL2
BAPI_DOCUMENT_CREATE2
BAPI_DOCUMENT_CHANGE2
BAPI_DOCUMENT_DELETE
For display image in the docking control, pleae kindly refer to the SAP DEMO: RSDEMO_DOCKING_CONTROL
Cheers,

Similar Messages

How to get the image stored in archieve link as an attachment in work item.

Hi All,
through transaction OAWD we are storing scanned images.
Once this transaction is executed a workitem appears in the inbox of the initiator with the scanned invoice as attachment.
When the user executes the work item FV60 screen is displayed where the user enters the data based on the scanned invoice attachment.
After the user Parks the document the custom workflow triggers and a workitem appears in the inbox of an approver.
Our requirement is that the scanned image should also appear as the attachment.
Can you please suggest how to get the image stored in archieve link as an attachment in work item.
Regards
Shraddha

Hi Martin,
with every parked document a scanned image is linked.
I need to create a link under objects and attachments in the work item, such that when the user clicks that link the image is displayed.
At present the following functionality is available.
The BO used is FIPP
Objects and attachments:
parkeddocument:AK0108500001252008.(via FIPP binding with WIOBJECT_ID)
On clicking the link below objects and attachments: the parked document AK0108500001252008 opens in display mode.
Now we want to have 2 links:
parkeddocument:AK0108500001252008.
image.
When we click on the link image then the scanned invoice linked to the document should get opened.
I am able to get the image id of the the image through SAP_WAPI_GET__OBJECTS,
export parameter leading_object provides the detail.
But I am not able to figure out how to use it in my workflow to display it as an attachment.
Hope this will give a better understanding of my question.
can you please suggest as to how I should proceed with it.

[CS2]How to get the Image Width & Height using JS (ILLUSTRATOR CS2)

Hi,
How to get the Image width & height of an Image using javascript .Im using Illustrator CS2.
Any sample code
Regards
MyRiaz

you can reference the dimensions of a loading image (or swf)
by referencing the target movieclip's dimensions AFTER loading is
complete. ie, use preloader code or the onLoadInit() method of a
moviecliploader listener.

How to get the query result of improvement (Before and After ) using sql de

how to get the query result of improvement (Before and After ) using sql developer.

Check
http://www.oracle.com/technetwork/articles/sql/exploring-sql-developer-1637307.html

How to get the password of a password protected Excel Sheet using java/jxl

Hi ,
how to get the password of a password protected Excel Sheet using java / jxl program.
plz any one help me .
Ramesh P
[email protected]

If they've implemented the password system correctly there probably isn't a way of getting the password at all.

How to get the kerning value and set it to back use script?

hi,guys
I come back again.
I encountered a kerning problem.
how to get the kerning value and set it to back use script?
Thanks very much!

For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port.

How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx 

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

How to get the values and attributes of Longlived processes by using ProcessID.

Hi Experts,
For every process we creates, LC ES2 creates processID.
we know that if you creates a long lived process, all the values which are in proces will be stored some where in DB.
Here my requirement is by using processID I need to get all/some values/variables stored in database.
I am not able to get values using processID. Here I don't have clue on how to get the values.
Please tell me how to get the same by using Process Management. Link/guide would be helpful
Thanks
Praveen.

Searchable means you can put a filter criteria on it (e.g. where amount > 50000)
Visible means you can add have this column returned as an output (and therefore you can add it as column in listview and see it in Task Details).
These two attributes were provided so that queries could be done against the process variables, but the exact contents of the variables are not allowed to be seen.

[Win VC++ 6.0 ]How to get the number of files count in a folder using VC++ 6.0?

Hi all,
Can any one tell how to get the number of files(.EPS) count inside a folder when the folder path is specified in VC++ 6.0?
Thanks in Advance.
Regards
myriaz

I'm a little confused by the question, but it sounds like you're asking how to count the number of files with a particular extension in a given directory? That's not really an AI SDK question, but it's a fairly easy one to find if you google it. If you're trying to use Illustrator to do it, AI doesn't have a general purpose file API. It has a few functions to do some things that Illustrator needs, but I don't think enumerating directories is one of them.

How to get the current user name in Provider hosted app using appOnlyAccessToken

Hi,
Please help me, how to get the HostWeb UserName in Provider Hosted App
i have Provider hosted App, and Anonymous Authentication is enabled on AppWeb, using appOnlyAccessToken
Below code does not return current user who Log in in hostweb, it is returning
SharePoint App (app@sharepoint)
Web web = clientContext.Web;
clientContext.Load(web);
clientContext.ExecuteQuery();
clientContext.Load(web.CurrentUser);
clientContext.ExecuteQuery();
clientContext.Web.CurrentUser.LoginName;
Below code gives a blank name when Anonymous Authentication is enabled, if Anonymous Authentication is disabled
app prompts for credentials
HttpContext.Current.User.Identity.Name
Thanks
Ram

Hi,
Since you are using a provider Hosted app if you want to get the current logged in name than do not use AppOnlyAccessToken else use AccessToken which is App + user Context AccessToken.
then
Web web = clientContext.Web;
clientContext.Load(web);
clientContext.ExecuteQuery();
clientContext.Load(web.CurrentUser);
clientContext.ExecuteQuery();
clientContext.Web.CurrentUser.LoginName;will return proper user Name.
HttpContext.Current.User.Identity.Name will never return the user as this object is related to IIS server of your App Server not sharepoint.you should set this as Anonymous in case of provider hosted app.you can download the below sample which uses the AccessToken which has user name in it.https://code.msdn.microsoft.com/Working-provider-hosted-8fdf2d95
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

NSImageView - How to get the image file's path?

I'm working on an image uploader application, and am having difficulties getting the info I want from an editable NSImageView. Basically I have an NSImageView object which the user can drag an image file to display a preview and add to the list of images to be uploaded. The image is loaded into the NSImageView just fine, however for my purposes I need access to the actual file path of the image.
The NSImageView target function is activated when an image file is dragged onto the view, however at that point an NSImage is provided and I have yet to figure out how to get access to the file name. Anyone have any suggestions regarding this?

This may be helpful.
http://nsnotfound.blogspot.com/2007/08/nsimageview-and-image-filenames.html
Eric

Re: How to reduce the width of Docking Control Container

Hi All,
I created a text editor control using docking container. Its width is occupying the entire screen. I want to reduce it to half of the screen. I tried changing the values of ratio, extension and used the methods set_width to change it, but was not successful. Please let me know how can i reduce the width. Below is the code which i am using.
data: editor TYPE REF TO cl_gui_textedit,
lo_dock TYPE REF TO cl_gui_docking_container.
IF lo_dock IS INITIAL.
CREATE OBJECT lo_dock
EXPORTING
repid = sy-cprog
dynnr = sy-dynnr
ratio = 75
extension = 50
metric = cl_gui_docking_container=>metric_mm
side = cl_gui_docking_container=>dock_at_bottom
name = 'DOCK_CONT'.
IF sy-subrc 0.
MESSAGE 'Error in the Docking control' TYPE 'S'.
ENDIF.
CREATE OBJECT editor
EXPORTING
parent = lo_dock
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
gui_type_not_supported = 5
OTHERS = 6.
CALL METHOD editor->set_text_as_r3table
EXPORTING
table = i_texttable
EXCEPTIONS
error_dp = 1
error_dp_create = 2
OTHERS = 3.

Hi,
Check the other exporting parameter of cl_gui_textedit's constructor.
Try using MAX_NUMBER_CHARS, WORDWRAP_MODE. Pass these paramters while creating object editor.
Regards,
Sharin.

In IPhoto I have edited the order of my images. When I play the album on Apple TV the order reverts back to the time stamp. Any suggestions on how to get the images to play on my TV in the order I want?

Apple TV won't play back my album images from IPhoto in the edited order I want. The order seems to revert back to the time stamp for the photos. I have combined the photos from 3 different cameras and they had slightly different clock settings. I am working on an edited presentation of about 1500 Pics from travels in Turkey this summer and sometimes the order makes more sense if I move some of the images quite a ways. Is there any solution short of changing the time stamp on every single image?

Using the 'adjust date and time' setting is the best way to syncronise the photos from all your cameras. However as you say this merely puts them all in the correct order chronologically.
If there are photos that you feel would be best somewhere else in an album other than in date order, it may depend on how many as to which is the best option for you. If it's only a few you may wish to adjust the date/time on these few manually so they fit in with the rest where you want them.
If you have a lot of photos you want in a different order to the order by date, or you really don't care about what date/time is used and just want them in the order you want them in, then 'batch change' is the best option.
From the view menu, select 'sort photos - manually', drag the photos around until they are in the order you want, select all of them. Now select the batch change option and choose 'Date' from the 'set' options, type in a date and time for the first photo, it can be anything but it's probably a good idea to choose something close to the original date, then check the box 'Add'. You can keep the value set at 1 minute or enter any value you want, it may be more realistic to divide the length of your holiday by the number of photos you have to calculate a value, but it really isn't necessary. Clicking OK will adjust all the dates without affecting the title or description and the photos will now show on the Apple TV in that order.
Just to be sure iTunes is updated, you may want to go to the advanced menu/choose photos to share in iTunes and deselect the album, apply, reselect the album and apply again.

How to get the image from web site

Hi,
Anybody know the coding that use to get or download the image from the web site when the image's url is given.
Thanks

http://www.exampledepot.com/egs/java.net/GetImage.html

How to get the number of rows returned by a report?

Hi,
I'm developing my first application in APEX and so far everything seems fine, except I can't figure out this very simple thing: I have a report based on a PL/SQL block returning an SQL string. I'd like to have a message (something like "X rows returned") just before the report. The closest thing I could find was "X to Y out of Z" in the pagination styles, but that's not what I want. Also I don't think running the same query to get COUNT() is wise.
Any help would be appreciated.
Thanks,
Konstantin

My guess is that it only shows the number of rows it has retrieved. I believe the defailt is for it to only retrieve 50 rows and as you page through your report it retrieves more. So this would just tell you how many rows was retireved, but probably not how many rows the report would contain if you pages to the end. Oracle doesn't really have a notion of total number of rows until the whole result set has been materialized.

How to get the image in docking control in a report using doc management

Similar Messages

Maybe you are looking for