How to get the individual query terms?

Is there a way in Intermedia to get the individual query terms that are expanded by intermedia after a query using stemming or fuzzy matching.
Example: a query like "$distinguish" expands to distinguish, distinguished and distinguishes.
CTX_DOC.MARKUP does the work but returns the complete contents (with markup) of the indexed column in stead of the query terms only.

1 with t as
2 ( select 1 day_from, 3 day_to from dual)
3 select day_from +level -1 day_from, day_to
4 from t
5* connect by level <= day_to
SQL>
SQL>/
DAY_FROM DAY_TO
 1 3
 2 3
 3 3

Similar Messages

How to get the individual records

Table A
SNO DAY_FROM DAY_TO
1 1 3
Result:
DAY_FROM DAY_TO
1 3
2 3
3 3
Above mentioned Table DAY_TO value is 3 ,
So in that How to get the 3 individual records for above mentioned row.
Thanks in advance.
Edited by: UserK on Sep 11, 2009 8:14 AM

1 with t as
2 ( select 1 day_from, 3 day_to from dual)
3 select day_from +level -1 day_from, day_to
4 from t
5* connect by level <= day_to
SQL>
SQL>/
DAY_FROM DAY_TO
 1 3
 2 3
 3 3

How to get the SQL Query statement of a Search Form ?

Hi all,
We have a requirement to send the query result of an ADF Search Form into report application (Crystal rpt).
Crystal can accept data source as query statement. SO I think of getting the exact query statement "generated" by the ADF Search form and send it to crystal.
Is this possible ?
Thank you very much,
xtanto

Try the various get methods of the viewObject such as getQuery:
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.2/state/content/navId.4/navSetId._/vtAnchor.getQuery%28%29/vtTopicFile.bc4jjavadoc%7Crt%7Coracle%7Cjbo%7CViewObject%7Ehtml/

How to get the Actual Query of View Object

Hi all,
I have a standard. I need to modify the query of the VO attached to a picklist based on responsibility. I am able to achieve my requirement but it is getting reflected for all the responsibilities even though i extended the controller for a particular responsibility. I used setQuery() to change the query of my VO. When checking "About this page". The code i added also shown in the page. Now i want to get the actual query to the VO before the controller is extended so that i can set the modified query or actual query based on my responsibility. Kindly share your knowledge.
Regards,
Pradeep

Hi,
I guess following query will not work ,Why use 2 where clauses.
SELECT * FROM (select NVL(VENUE_NAME,' ') "Venue",
NVL(VENUE_CITY,' ') "City",
NVL(COUNTRY_DESC,' ') "Country",
EVENT_NUMBER
From NS_EVENT_VENUE_DETAILS,NS_COUNTRY_MASTER WHERE COUNTRY_CODE = VENUE_COUNTRY) QRSLT WHERE (QRSLT.EVENT_NUMBER = 1539
you can as following using bind variable.
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcquerying.htm#CEGDGIJH

How to get the original query string in an event receiver when dialogs are enabled

I have scenario where I am adding a document to a document library which has an external data column on it. My goal for this column is to have it automatically populated with an appropriate value based on original query string to the page. The general
idea is that I am on a custom page that has various webparts on it including a view of my document library that is context sensative based on the query string, and I want to use that context sensitivity not just to filter the list but also when adding documents.
I have been searching around for solutions to this problem all day and have gotten this far:
I have an event receiver attached to my document library that handles the ItemAdded event syncronously (as such I have the new list item available to me). In that event receiver I am able to set the column values as required. Where I am stuck is on getting
the value from the query string that I need to actually set as the column value.
Based on:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010programming/thread/8cfcb299-9a55-4139-86ec-0b53b2922a54 and several similar articles/posts I have been able to get the original source Url with the query string I want via the following
code in my event receiver:
private HttpContext context;
public EventReceiver1()
context = HttpContext.Current;
public override void ItemAdded(SPItemEventProperties properties)
var originalQueryString = context.Request.QueryString["Source"];
// Parse the query string and use the value ...
The problem is that this solution breaks down if the dialogs are turned on under the advanced settings for the list. The reason the solution fails is because the "Source" query string parameter goes away and is replaced by "IsDlg" set to a value of "1".
Does anyone know how to get past this hurdle? Any help would be greatly appreciated.

Hi Stuart,
The reason I'm looking for "Source" in the query string is because that is something I found to be reliable when the Dialogs are turned off. I've dug around pretty deep in the Request object to see if anything had the data I was looking for and unfortunately
it doesn't appear to be there. The
context.Request.QUeryString.ToString()
returns a rather simple one of:
List=%7b43ECDCB0-8440-4652-B067-AA20481779D7%7d&RootFolder=&IsDlg=1
and the
context.Request.UrlReferrer.Query.ToString()
has the same value.
I suspect this is due to the dual step process that takes place in adding an item to a document library where the first modal popup (which I suspect likely has the information I need) gives you the opportunity to browse to your file and then the second
dialog (maybe this is getting brought up as a result of another request which is now referring back to the original request that brought up the first dialog?) where you edit your properties.
Thanks for the try though, if you've got anything else I'd love to hear it.

How to get the dynamic query result

If in one query, there is the amount range dimension, based on different dimension value combination, the customer revenue should be refreshed into different range, how to make it by cube?
eg.
Customer Store    Material Month    Amount
C001     M & S    Tennis    2005/01   "10"
C001     Douglas Tennis    2005/02   "60"
C002     M & S    Soccer    2005/01    "1"
C002     M & S    Soccer    2005/02    "50"
C002     M & S    Tennis    2005/02    "50"
C003     Douglas Tennis    2005/01    20
Query condition:
Time Customer Amount Range     Amount
2005 C001     0~50_____________0
2005 C001     51~100___________70
2005 C001     100 +____________0
2005 C002     0~50_____________0
2005 C002     51~100___________0
2005 C002     100+_____________101
2005 C003     0~50_____________20
2005 C003     51~100___________0
2005 C003     100+_____________0
However, if I drill down Time into month, the result is total different, I only list the result related to customer C001
Time     Customer Amount Range    Amount
2005/01 C001      0~50____________10
2005/01 C001      51~100__________0
2005/01 C001      100 +___________0
2005/02 C001      0~50____________0
2005/02 C001      51~100__________60
2005/02 C001      100 +___________0
Any good solution on that? Thanks for any input.
Message was edited by: Lei Shao

Hi, Sen,
I used your solution in my infocube and query, where I created a structure with 'between'. However, it is still the simple summation in different amount range.
Just like the following:
Sales ORG / Sales Office / Sales Rep / Amount
East      / Atlanta      / 1001      / 3
East      / Atlanta      / 1002      / 4
So the query result is the same:
S-ORG / S-Office / S-Rep / Amount Range / Amount
East / Atlanta / 1001 / 0~5          / 3
East / Atlanta / 1001 / 5+           / 0
East / Atlanta / 1002 / 0~5          / 4
East / Atlanta / 1002 / 5+           / 0
When I remove 'drill down' for Sales Rep, the result is:
S-ORG / S-Office / Amount Range / Amount
East / Atlanta / 0~5          / 7
East / Atlanta / 5+           / 0
However our expection for the result is different, because in business traction, if we remove sales rep, the sales org and sales office will get the sub-total like this: (we can image it with ABAP program sub-total)
Sales ORG / Sales Office / Amount
East      / Atlanta      / 7
So our expection for the result is:
S-ORG / S-Office / Amount Range / Amount
East / Atlanta / 0~5          / 0
East / Atlanta / 5+           / 7
Therefore, any good suggestion for this?
Thanks a lot
Regards,
LS

How to get the sql query result?

Hi,
Currently I am using LV2012 to connect a Oracle database server. After the installations/settings for Oracle Express and Oracle ODBC driver done.
I am sucessfully to use the SQL command to query the data through my window command prompt.
Now the problem is, how I do the same task in Labview by using the database connectivity toolkits?
I have build a VI for query as attached, but i have no idea what pallete to use to get the query result.
Please help me ~~
Solved!
Go to Solution.
Attachments:
Query.vi ‏9 KB

Here is a piece of code I use to test SQL commands, you can use the part that retrieves sql results.
It is also possible to get the column headers back, but that is for next lesson!
Attachments:
RunSQLCommand.vi ‏30 KB

How to get the individual total for the Sales(t1),Cost of Sales,(t2),t1-t2

Hello BW gurus,
sorry for the incomplete question.
This is how i need my report.
Account Number Key Figure Type Company code Plant Sales Organization Fiscal year/period Z1/007.2006 Z1/008.2006 Z1/009.2006 Z1/010.2006 Z1/011.2006 Z1/012.2006
 SALES x1
 SALES x2
 SALES x3
 SALES x4
 SALES x5
 SALES x6
Overall Result SALES x1x2..x6
Similarly i need to get the cost of sales and its overall results
and then i have to get the gross margin as (Sales - Cost of Sales) for each fiscal period(columnwise).
i got the Sales and Cost of Sales like this
Plant Sales Organization Fiscal year/period
 SALES
 COST OF SALES
 GROSS MARGIN
 SALES
 COST OF SALES
 GROSS MARGIN
 SALES
 COST OF SALES
 GROSS MARGIN
 SALES
 COST OF SALES
 GROSS MARGIN
 SALES
 COST OF SALES
 GROSS MARGIN
 SALES
 COST OF SALES
 GROSS MARGIN
 SALES
 COST OF SALES
 GROSS MARGIN
but i need all the sales data first and its total(S)
and then all the cost of sales data and its total(C)
and the gross margin (S-C) for individual fiscal period.
Please reply ASAP.Quick help is appreciated.
Thanks in advance,
Regards
Sam Mathew

Hi Viraylab,
 check VBAP-NETPR field of table VBAP
It gives the net price corresponding to a line item.
Goto Tcode VA03.See the item overview tab U will get Net Price field for indivisual line item.
Reward points if helpful.
Regards,
Hemant

How to get the procedure/query details for the corresponding transaction id

Hi,
Is it possible to know the transaction details like (procedure/query) from the correcponding local transaction ID? (for eg:10.10.50935)
I am working on ORA-01591 issue (lock held by in-doubt distributed transaction) and got the details of in-doubt transactions from dba_2pc_pending view. Further I would like to get additional details about the procedure name and query who is triggering the issue.
Thanks

Hi Sybrand,
The response is not of much help. Can you please tell me in more detail.
Suppose a transaction is completed long back (say 5 days ago) and I have a transaction id with me. I would like to know the correcponding procedure/query associated with that transaction id.
Is it really possible to find out old transaction details from any view?

How to get the specified serarch term from the complete url? - Help

Hello,
I have a table in which some columns. One of the column is storing the complete url for the search given by the user.
For Example:
1.
I give search like "oracle" on the Google, the column will store the complete url as
"http://www.google.com/search?hl=en&q=oracle".
I want the search word "oracle" to be returned from the column.
2.
I give search like "new + features + in + oracle + 10g", the column will store the url as
"http://www.google.com/search?hl=en&lr=&q=new+%2B+features+%2B+in+%2B+oracle+%2B+10g"
I want "new + features + in + oracle + 10g" search word to returned from the column.
Can anyone tell me how to achieve this task? I have tried for a long time also I tried the sys.utl_url.unescape() function, but could not got the desired result.
Please help, its really urgent!!!
Thanks in advance.

Hi,
you can have a look into this code:SET ESCAPE ON
DECLARE
        ref1 VARCHAR2(1000 CHAR) := 'http://www.google.com/search?hl=en\&q=oracle';
        ref2 VARCHAR2(1000 CHAR) := 'http://www.google.com/search?hl=en\&lr=\&q=new+%2B+features+%2B+in+%2B+oracle+%2B+10g';
        FUNCTION hextodec( h IN VARCHAR ) RETURN NUMBER
        AS
                h2 VARCHAR2( 150 );
                i NUMBER( 10 );
                j NUMBER( 2 );
                d NUMBER;
        BEGIN
                h2 := LTRIM( h, '0' );
                d := 0;
                FOR i IN 1 .. LENGTH( h2 )
                LOOP
                        SELECT DECODE( SUBSTR( h2, i, 1 )
                                , '0', 0, '1', 1, '2', 2, '3', 3, '4', 4, '5', 5
                                , '6', 6, '7', 7, '8', 8, '9', 9, 'A', 10
                                , 'B', 11, 'C', 12, 'D', 13, 'E', 14, 'F', 15 )
                                INTO j
                                FROM DUAL;
                        d := 16 * d + j;
                END LOOP;
                RETURN d;
        END hextodec;
        FUNCTION strip(samplevalue IN VARCHAR2) RETURN VARCHAR2
        AS
                finalvalue VARCHAR2(1000 CHAR) := samplevalue;
                decimalvalue NUMBER(2);
                pospct NUMBER;
                extract VARCHAR2(2 CHAR);
        BEGIN
                finalvalue := SUBSTR(finalvalue ,INSTR(finalvalue ,'\&q='));
                finalvalue := SUBSTR(finalvalue ,4);
                if (INSTR(finalvalue ,'\&')-1 > 0) then
                        finalvalue := SUBSTR(finalvalue ,1,INSTR(finalvalue ,'\&')-1);
                end if;
                finalvalue := REPLACE(finalvalue ,'+',' ');
                LOOP
                        pospct := INSTR(finalvalue ,'%');
                        EXIT WHEN pospct = 0;
                        extract := SUBSTR(finalvalue ,pospct+1,2);
                        finalvalue := SUBSTR(finalvalue ,1,pospct-1) || chr(hextodec(extract)) || SUBSTR(finalvalue ,pospct+3);
                END LOOP;
                RETURN finalvalue;
        END;
BEGIN
        DBMS_OUTPUT.PUT_LINE( hextodec('2B'));
        DBMS_OUTPUT.PUT_LINE(strip(ref1));
        DBMS_OUTPUT.PUT_LINE(strip(ref2));
END;
/Regards,
Yoann.

How to get the Frame size in H.263 by JMF ?

Dear all,
How to get the individual frame size in H.263 format if the H.263 file is a format of InputStream ???

VideoFormat.getSize() returns a Dimension of a frame. H263Format is a subclass of VideoFormat. Guess you could get that object from getFormat() in your stream if it's a PullBufferStream. Or, with a Processor, you could do getTrackControls() and iterate through the TrackControl.getFormat()s until you find the VideoFormat.
Suppose you could also get a FrameGrabbingControl, grab a frame and get the Dimension from him.
--invalidname

TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

How to calculate the individual sums of multiple columns in a single query

Hello,
Using Oracle 11gR2 on windows 7 client. I have a question on calculating sum() on multiple columns on different columns and store the results in a view. Unfortunately I could not post the problem here as it keeps on giving error "Sorry, this content is not allowed", without telling where or what it is! So I had to post it in the stack-overflow forum, here is the link: http://stackoverflow.com/questions/16529721/how-to-calculate-the-individual-sums-of-multiple-columns-in-a-single-query-ora
Will appreciate any help or suggestion.
Thanks

user13667036 wrote:
Hello,
Using Oracle 11gR2 on windows 7 client. I have a question on calculating sum() on multiple columns on different columns and store the results in a view. Unfortunately I could not post the problem here as it keeps on giving error "Sorry, this content is not allowed", without telling where or what it is! So I had to post it in the stack-overflow forum, here is the link: http://stackoverflow.com/questions/16529721/how-to-calculate-the-individual-sums-of-multiple-columns-in-a-single-query-ora
Will appreciate any help or suggestion.
ThanksLooks like you want a simple group by.
select
          yr
     ,      mnth
     ,      region
     ,     sum(handled_package)
     ,     sum(expected_missing_package)
     ,     sum(actual_missing_package)
from test
group by
     yr, mnth, region
order by
     yr, mnth, region;I wouldn't recommend storing your data for year / month in 2 columns like that unless you have a really good reason. I would store it as a date column and add a check constraint to ensure that the date is always the first of the month, then format it out as you wish to the client.
CREATE TABLE test
     year_month                              date,
    Region                     VARCHAR2(50),
    CITY                       VARCHAR2(50),
    Handled_Package            NUMBER,
    Expected_Missing_Package   NUMBER,
    Actual_Missing_Package     NUMBER
alter table test add constraint firs_of_month check (year_month = trunc(year_month, 'mm'));
ME_XE?Insert into TEST (year_month, REGION, CITY, HANDLED_PACKAGE, EXPECTED_MISSING_PACKAGE, ACTUAL_MISSING_PACKAGE)
2 Values (to_date('2012-nov-12', 'yyyy-mon-dd'), 'Western', 'San Fransisco', 200, 10, 5);
Insert into TEST (year_month, REGION, CITY, HANDLED_PACKAGE, EXPECTED_MISSING_PACKAGE, ACTUAL_MISSING_PACKAGE)
ERROR at line 1:
ORA-02290: check constraint (TUBBY.FIRS_OF_MONTH) violated
Elapsed: 00:00:00.03
ME_XE?Insert into TEST (year_month, REGION, CITY, HANDLED_PACKAGE, EXPECTED_MISSING_PACKAGE, ACTUAL_MISSING_PACKAGE)
2 Values (to_date('2012-nov-01', 'yyyy-mon-dd'), 'Western', 'San Fransisco', 200, 10, 5);
1 row created.
Elapsed: 00:00:00.01
ME_XE?select
2        to_char(year_month, 'fmYYYY')    as year
3     , to_char(year_month, 'fmMonth')   as month
4     , Region
5     , CITY
6     , Handled_Package
7     , Expected_Missing_Package
8     , Actual_Missing_Package
9 from test;
YEAR         MONTH                REGION                         CITY                    HANDLED_PACKAGE EXPECTED_MISSING_PACKAGE ACTUAL_MISSING_PACKAGE
2012         November             Western                        San Fransisco                       200                       10                      5
1 row selected.
Elapsed: 00:00:00.01
ME_XE?Then you have nice a nice and easy validation that ensures you data integrity.
Cheers,

How to get the role name in which query is published ?

Hi Experts,
Is there any table where i can get the name of the role in which a particular query is published. I know that if i have a role , i can check in pfcg giving that role name and in menu tab i can see all the queries published under that role. But if i know query but not role how to get the role name . Is there any table or functon modules or programs to get the information.
Thanks & Regards
Vamsi Kiran

Check this table
AGR_HIER

How to get the query result of improvement (Before and After ) using sql de

how to get the query result of improvement (Before and After ) using sql developer.

Check
http://www.oracle.com/technetwork/articles/sql/exploring-sql-developer-1637307.html

How to get the individual query terms?

Similar Messages

Maybe you are looking for