How to get the log on details of users in the given period

Hi Frndz..
I need logon information of portal users, means in a given period i need the information of each user when they loged in and how much time they are in portal and if it is possible whcih application they accessed.
Am trying to get this from Portal Activity Reports but am not gettinig as per my requirment, n it seems to be not possible to customize as per our requirment.
Thanks in Advance
Regards
Rajesh

hi
You can also directly query the following Portal database tables,for information on users:
WCR_USERSTAT: Holds information about the number of users who logged on to the portal.
WCR_USERFIRSTLOGON: Holds information about the first logon of each user and how many pages and iViews the user viewed
WCR_USERPAGEUSAGE: Holds information about which users viewed which pages and iViews.
Thanks
Bharathi.ch

Similar Messages

How to get the split period wage type amount in payslip?

How to get the split period wage type amount in payslip?
Payroll period for 01.01.09 to 31.01.09.
1.     Employee is active from 1.1.09 to 10.01.09
2.     Employee is inactive from 11.01.09 to 20.01.09
3.     Employee is again active from 21.01.09 to 31.01.09
In Result Table three split periods are created.
From 01.01.09 to 10.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 20.00
From 11.01.09 to 20.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 00.00
From 21.01.09 to 31.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 10.00
My requirement is to print only the last split period in payslip from 21.01.09 to 31.01.09. May you please help me in this regard.
Thanks in advance
Regards,
Rajesh.

Hi
Try to read the below:
WPBPC : Distribute Lump Sum Wage Elements to WPBP Periods
Object
    Operation
Use
    Operation WPBPC distributes the amount of the current wage type to the
    active WPBP periods in the payroll period.
Input
    The current wage type in the header entry of table OT is used as input
    for this operation.
Procedure
    Within payroll, wage types are assigned to a fixed WPBP period by
    infotype 0014 Recurring Payments/Deductions, for example. However, you
    may want to distribute this payment to all active WPBP periods, which is
    what would happen if the wage type were entered in basic pay. Therefore,
    various specifications exist for parameter S:
    o   If the specification is 'A', and if several active WPBP periods
        exist, the amount is simultaneously reduced on a calendar-day basis.
    o   If the specification is 'D', the wage type is distributed to all
        existing WPBP periods without the amount being reduced.
    o   If the specification is 'S', and if the validity period starts or
        ends during the period, the entry in table WPBP is split using this
        date. The wage type is stored in table OT for the corresponding WPBP
        period.
        This parameter is only allowed if processing was accessed using
       function P0014.
       In this case, infotype 0014 must be processed before absence
       valuation and function PARTT. Otherwise, rejections occur during
       payroll processing.
   o   Specification 'X' is the combination of 'A' and 'S'.
       This parameter is only allowed if processing was accessed using
       function P0014.
   o   If the specification is 'W', and if the validity period starts or
       ends during the period, the entry in table WPBP is split using this
       date (as with option 'S'). Unlike 'S', the wage type is not stored
       in table OT.
       This parameter is only allowed if processing was accessed using
       function P0014.
   o   If the specification is ' ', the wage type is stored in table OT for
       each WPBP period in which the validity interval fits.
       This parameter is only allowed if processing was accessed using
       functions P0014 or P0015.
   If the WPBP split is set for a wage type, the wage type is stored
   without changes in table OT. If you specify a different wage type name
   in the second parameter, the wage type is stored with this name in table
   OT. Before you execute operation WPBPC, you may therefore need to delete
   the split using operation ELIMI.
   If a country-specific split (C1, C2, or C3 split) is set, the operation
   interprets it as an error. The employee in question is rejected by
   payroll. All other splits are transferred as they are.
Output
    The processed wage type, or the wage type specified in the operation
    call, is written to table OT (output table) with the appropriate split
    indicator and reduced amount as operation output for each WPBP period.
    Parameter specification 'W' is the only exception.
Syntax
    OOOOOSVVVV
    OOOOO       WPBPC       Operation name
    S
                blank       distribute to all WPBP periods
                S           split and distribute WPBP
                W           split but do not distribute WPBP
                A           distribute to active WPBP periods
                            with calendar-day reductions
                D           distribute to all existing
                            WPBP periods
                X           combination of 'S' and 'A'
    VVVV                    Results wage type
                blank       input wage type = results wage type
                wage        wage type name of input wage type is replaced
                 type       by wage type name of results wage
                 name       type
    Wage type before operation:
Example
    M100        02          3000
    WPBP split
    01 June 01 - June 20 active
    02 June 21 - June 30 active
    VVVV                    Results wage type
                blank       input wage type = results wage type
                wage        wage type name of input wage type is replaced
                 type       by wage type name of results wage
                 name       type
    Wage type before operation:
Example
    M100        02          3000
    WPBP split
    01 June 01 - June 20 active
    02 June 21 - June 30 active
    Wage type before operation:
    WType       WPBP        Amount
    M100        00          3000.-
    M200        02          2000.-
    Operation:   WPBPCA
    Wage type after operation:
    WType       WPBP        Amount
    M100        01          2000.-
    M100        02          1000.-
    M200        02          2000.-
    Operation:   WPBPC
    Wage type after operation:
    WType       WPBP        Amount
    M100        01          3000.-
    M100        02          3000.-
    M200        02          2000.-
Regards
Team Member.

How to get the same period last year value using Fiscal Calendar?

Hi there,
I am using DAX in a Tabular Model project but I am getting stuck trying to get the following:
We are using a Fiscal Calendar (from 01 April to 31 March).
Previous Period Value
Value
2012
April
15
May
10
Jun
20
2013
April
15
30
May
10
20
Jun
20
25
I have tried to use sameperiodlastyear but there is an error saying that this function cannot be used for non contiguous dates. DATEADD is given the same error...
Could anyone help me getting the right measure expressions for [Previous Period Value]?
Thanks and best regards,
Joss

Hi Joss,
In SQL Server Analysis Services, we can can compare revenue with the hierarchy periods (year, month, day) by using the PARALLELPERIOD function, and now you want to compare with custom periods. (NOTE: We cannot compare it with the PARALLELPERIOD function
since
PARALLELPERIOD function returns a member from a prior period in the same relative position as a specified member. So if the first time span not equal to the second one (such as the first period is 3 days, and the second period is 2 month)). Here
is a sample query about PARALLELPERIOD function for your reference.
with
set Hotels as
[Hotels].[Hotel ID].&[1015],
[Hotels].[Hotel ID].&[5640],
[Hotels].[Hotel ID].&[8800]
set Period as [Arrival Date].[Date].[Month].&[2012]&[1]:[Arrival Date].[Date].[Month].&[2012]&[12]
member [Arrival Date].[Date].[0] as sum({ Period })
member [Total Amount N-1] as (PARALLELPERIOD([Arrival Date].[Date].[Year], 1, [Arrival Date].[Date].[Year].&[2012]), [Measures].[Total Amount])
select
[Measures].[Total Amount],
[Measures].[Total Amount N-1]
} on 0,
nonemptycrossjoin
Hotels,
Hotels.[Hotel].children,
*{[Arrival Date].[Date].[0]}
} on 1
from [Booking_Cube]
Regards,
Charlie Liao
TechNet Community Support

How to get the given output format..

Hi,I want to write a code in ABAP in such a way that I should get the output in the right side format.
Ex:
1200 - > 1,200
12000 - > 12,000
120000 -> 120,000
1200000 -> 1,200,000
12000000 -> 12,000,000
120000000 - > 120,000,000
Thanks.

HI tushar,
1. I don't know whether i understood u r question !
2. FOr writing with COMMA,
if we use simple WRITE,
then it will show just as u want !
regards,
amit m.

How to get the information of the log related to t.code generated by basis.

In the log generated by the basis personnel we found the details of user and corresponding t.code used details. How to get the information reg. which document he went into using this t.code? For example me29 t.code used by 'x' user. The log is showing time date t.code and user. By using me29n which document he attended is the requirement. How to get this information. Let me know it pl.
TS

Thanks all for the help.
Here is my solution. A mix from Julian and Thomas.
In future I will encapsulate the code in a function module.
DATA: BEGIN OF usr_tabl OCCURS 10.
        INCLUDE STRUCTURE uinfo.
DATA: END OF usr_tabl.
DATA: th_opcode(1) TYPE x.
DATA: LV_TID LIKE SY-INDEX.
CONSTANTS: opcode_list LIKE th_opcode VALUE 2.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_list
ID 'TAB' FIELD usr_tabl-sys.
CALL FUNCTION 'TH_USER_INFO'
EXPORTING
    CLIENT = sy-mandt
    USER   = sy-uname
IMPORTING
    TID    = LV_TID.
read table usr_tabl with key tid = lv_tid.
IF sy-subrc = 0.
CASE usr_tabl-type.
    WHEN 2.
      write :/ usr_tabl-type, 'SYSTEM'." (system)
    WHEN 4.
      write :/ usr_tabl-type, 'GUI'." (Gui)
    WHEN 32.
      write :/ usr_tabl-type, 'RFC'."(RFC)
    WHEN 202.
      write :/ usr_tabl-type, 'PLUG-IN'." (Plug-in &).
endcase.
ENDIF.

How to get the Login Id (UPI) of the user who logged in the system?

hi,
I'm having a webdynpro application. In which i want to get the values from the R/3 based on the user who logs in.
so i need to get the UPI(login id) of the user who logs in. how to get the UPI of the user who logged in??
please help me out with the detailed procedure.
Thanks & Regards,
Suresh

Hi Suresh,
Try the following code.
ISearchResult rst = UMFactory.getUserFactory().getUniqueIDs();
                  IUserFactory usf = UMFactory.getUserFactory();
                  IUser iuser = null;
                  IUserListElement userElement = null;
                  int i = 0;
                  while (rst.hasNext()) {
                        iuser =
                              UMFactory.getUserFactory().getUser(rst.next().toString());
                        String email = iuser.getEmail();
                        String fname = iuser.getFirstName();
                        String lname = iuser.getLastName();
I have already used this code for the similar requirement.
regards
Anil

How to get the details of Transports which are yet to be imported

Hi Experts,
Kindly let me know how to get the Transport request details which were not yet imported.
For example:
We have two client in development system 300 and 400, The transports which are created in 300 and imported to 400 (in SCC1).
I need to know the details of transport requests related to 300 which are yet be to moved to 400.
Where can i get these details.
Thanks,
Narasimhan Krishna

Narasimhan,
Take a closer look at Yves KERVADEC's approach. The issue here is that typically SCC1 is used to move transports which have not yet been closed. You can see the details of any transport via se01/se09/se10, whether open or closed, but my interpretation of your question is that the customer wants to know which transports have been imported into the unit test client (400) via SCC1, which transports have been brought in by the transport system (after they were closed), and which transports have not yet been sent to either the unit test or QA system (i.e. are still open).
My guess is that you are trying to track down why things work in the unit test client and not in the QA client. That is actually a different question with a different approach, but if that's what you really want to answer, go ahead and ask that question in a separate thread and you'll get a ton of techniques.
Back to the question you actually asked: By writing a query, you can get a list of transports which have been brought in to the unit test client via SCC1. You can also get this information from SCC1 --> Goto --> Log Display. Then click All Transport Requests and doubleclick on the client. This will give you the import log of your unit test client with date/time stamp. Analysis of that data indicates to me that perhaps you may want to look at CC0_RSCCPROT03_ALV, but I'm not an ABAPer so the previously mentioned tables are probably better.
Anyway, once you have a list of transports which have been imported, you can subtract out the ones that have been closed and transported downstream (and back into the unit test client.. your transport path does re-import the final version of the transports into the unit test client... right?). You can get that information from another query or you can get the list from STMS as suggested by Aparajit Banik.Then you'll have a list of transports which have been imported into the unit test client via SCC1 but have not yet been released and made it downstream. This will give you a "hit list" of transports which might be causing a mismatch between your unit test and QAS clients. You would then inspect them more closely with SE09/SE10/SE01 (I prefer se01, but different folks prefer different version of the transaction).
Again, there are better ways to deal with client mismatches, but I'm answering the question you asked in case I misunderstood the underlying subtext.
I hope this helps!
Best regards,
--Tom

How to get the current logged in username from windows and put it into an AS var

Hello,
I was hopeing someone would know how to get the current logged in username from windows and put it into a var, so I can create a dynamic text box to display it.
Thanks in advance
Michael

Just for everyone’s info, this is the script I have used to get the logged in windows username into flash ---- not and air app.
In the html page that publishes with the .swf file under the <head> section:-
<script language="JavaScript" type="text/javascript">
function findUserName() {
     var wshell=new ActiveXObject ("wscript.shell");
     var username=wshell.ExpandEnvironmentStrings("%username%");
     return username;
</script>
The ActionScript:-
import flash.external.ExternalInterface;
var username:String = ExternalInterface.call ("findUserName");
trace (username); // a quick test to see it in output

How to get the network details in flex4.5 web application

How to get the network details in flex 4.5 web application
similar to the nativeinterface in air application

checkout this document for secure web application
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf6167e-7fff.html

How to get the User ID's details in SRM Workflow EBP system

Hi Team
How to get the User ID's details in SRM Workflow EBP system. Example like i have User ID "BTEMPEST" but i want his full name . so please suggst me how to get the full name of user id where it is maintained.
Thanks.
Puneet.

Thank you very much muthu.
For your information FM "RSPLPPM_GET_USERDETAILS" is working fine.
Thanks for quick response.
Thanks
Puneet.

How to get the logged in userId value in adf task flow OIM11g R2

Hi,
I have created an adf task flow. Now I want to run some query in that based on the logged in userId.
Could you please help me in knowing how to get the logged in userID value in adf TaskFlow so that I can run a parameterized query.
Thanks

3 different ways to retrieve the username (not sure what you mean by user ID) :
http://mahmoudoracle.blogspot.be/2012/06/adf-get-current-logged-user-name.html#.USI_c-h8zIo
Also provide your JDev version.
Basicly, you should use the groovy expression in a view criteria (it's the fastest and easiest way) and call that view criteria whenever you need it.
That's if you are using ADF BC of course.

How to get the Purchased item details in R12

Hello everyone, am using Oracle Application R12,
I need the following details for the all purchased item,
how to get the item_id,item_name,vendor_name,ordered_quantity,rec eived_quantity,
returned_quantity.
Thank you.
Regards,
Gurujothi.

Hi Gurujothi,
pl.try the following SQL. it will give you complete details of purchasing.
SELECT A.SEGMENT1 PO_NO, B.LINE_NUM, C.SHIPMENT_NUM,
C.QUANTITY,C.QUANTITY_ACCEPTED,C.QUANTITY_BILLED,C.QUANTITY_CANCELLED,C.QUANTITY_RECEIVED,C.QUANTITY_REJECTED,D.QUANTITY QUANTITY_RETURNED,
B.ITEM_ID,E.DESCRIPTION,F.VENDOR_NAME
FROM PO_HEADERS_ALL A , PO_LINES_ALL B , PO_LINE_LOCATIONS_ALL C , RCV_TRANSACTIONS D, MTL_SYSTEM_ITEMS_B E , PO_VENDORS F
WHERE A.ORG_ID = &OU_NAME
AND A.PO_HEADER_ID = &PO_HEADER_ID
AND B.PO_HEADER_ID = A.PO_HEADER_ID
AND C.PO_LINE_ID = B.PO_LINE_ID
AND D.PO_LINE_LOCATION_ID (+) = C.LINE_LOCATION_ID
AND D.TRANSACTION_TYPE (+) ='RETURN TO VENDOR'
AND E.INVENTORY_ITEM_ID = B.ITEM_ID
AND E.ORGANIZATION_ID = C.SHIP_TO_ORGANIZATION_ID
AND F.VENDOR_ID=A.VENDOR_ID
regards
sanjay

How to get the storage details during 5 min interval

Hi,
I used below java code to collect the storage details. But i didn't get any output. Without filter condition it display all the records available in table. How to get the
last five min data. Based on this how to change the tablequery.? I used partition key too. that also didnt work.
1) How to use the tick count in this example.
CloudStorageAccount httpAcc = CloudStorageAccount.parse(storageConnectionString);
CloudTableClient tableClient = httpAcc.createCloudTableClient();
CloudTable table = tableClient.getTableReference("$MetricsHourPrimaryTransactionsTable");
Date date = new Date();
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd");
TimeZone utc = TimeZone.getTimeZone("UTC");
sdf.setTimeZone(utc);
String upperBound = TableQuery.generateFilterCondition("TIMESTAMP",QueryComparisons.LESS_THAN,sdf.parse("2015-02-04")); // // sdf.format(cal.getTime())
System.out.println("call lowertime ->"+upperBound);
String lowerBound = TableQuery.generateFilterCondition("TIMESTAMP",QueryComparisons.GREATER_THAN,sdf.parse("2015-02-01"));
System.out.println("call uppertime ->"+lowerBound);
String filter = TableQuery.combineFilters(upperBound, Operators.AND, lowerBound);
//String startTick = TableQuery.generateFilterCondition("TIMESTAMP",QueryComparisons.GREATER_THAN,sdf.parse("2015-09-03"));
//System.out.println("the startTick==="+startTick);
//String tick = TableQuery.generateFilterCondition("PartitionKey",QueryComparisons.GREATER_THAN,startTick);
TableQuery<DynamicTableEntity> query = TableQuery.from(DynamicTableEntity.class).where(filter).select(new String[] {"Availability","TotalRequests","PercentSuccess"});
for (DynamicTableEntity ent : table.execute(query))
EntityProperty countProp = ent.getProperties().get("Availability");
if (countProp == null)
throw new IllegalArgumentException("Invalid entity, Count property not found!");
System.out.println(countProp.getValueAsString());
EntityProperty countProp1 = ent.getProperties().get("TotalRequests");
System.out.println(countProp1.getValueAsString());
EntityProperty countProp2 = ent.getProperties().get("PercentSuccess");
System.out.println(countProp2.getValueAsString());
Regards,
Rathidevi
rathidevi

checkout this document for secure web application
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf6167e-7fff.html

How to get the User Details inoformation in portal?

I had defined the user informations in "Portal User Details". But i don't know how to get it and what the user table is?
for example: How to get the email address of user i have defined in portals?
Tank you very much!
Ghia Liu
Genesyslogic.com.tw

You would use the portal API's for this, there is one named wwsec_api.person_info that returns a record with the specified user's information, such as first name, lsat name, email, telephone, etc - a pretty long list. With release 2 of portal the data is no longer stored in the wwsec_person$ table as it was in release 1 so use the API (which actually is how I would normally do it in release 1 as well).
To get more documentation on portal API's go to: http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/astart.htm
Hope that this helps you - enjoy the day!
Art

Confition type FRC1- how to get the change log,

Hi,
When the condition type FRC1 automatically gets deleted (deletion flag),. and we are not able to see the change log for the same.
how the Conditions are deleted. Or if at all any one has deleted, how to get the change log,

Check in
m/06
go to utilities
change log
If not found consult BASIS consultant

How to get the input details on the output screen in T code KCR0

Hi All,
How to get the input details on the output screen in T code KCR0, the issue is that we need to get the input details like Company code and payment date on the output screen while executing the report painter via t code KCR0.
I tried to chane the settings via t code KCR6 but still didn't get the required output details.
Regards,
Ajay

This is the asset accounting forum. You should post your question in the proper forum.

How to get the log on details of users in the given period

Similar Messages

Maybe you are looking for