How to get the Organizational Unit One level up

Hi
Does any one know any function module to get the org unit one level up by giving the current Organizational unit as input. Please reply very urgent.

Hello Nirmal
I am usually using the following function module to read to OM:
*   SAP_SORG
* OrgStructure with assigned orgunits)
    REFRESH: lt_struc.
    CALL FUNCTION 'RHPH_STRUCTURE_READ'
      EXPORTING
        plvar             = '01'            " active Planvar.
        otype             = 'O'             " OrgUnit
        objid             = l_wa_cb1-objid " Toplevel-Node
        wegid             = 'SAP_SORG'
        begda             = iw_begda
        endda             = iw_endda
        pup_info          = 'X'
        with_stext        = 'X'
        tdepth            = 0               " alle Sub-Levels
      TABLES
        stru_tab          = lt_struc
      EXCEPTIONS
        catalogue_problem = 1
        root_not_found    = 2
        wegid_not_found   = 3.
The parameter <b>WEGID</b> is the crucial on which determines the objects that are read from the OM. In your case you will need <b>WEGID = 'A002'</b> (reports (line) to).
To understand the <i>evaluation path</i> (WEGID) better have a look at transaction <b>PPST</b>.
Regards
Uwe

Similar Messages

How to get the Organization Units

Hello,
I have set up a LDAP server with JNDI Tutorial example. I have been able to search, list and also get the attributes from the server. But what i need to know is there a way to get the Organization Units in java.
ie. o = JNDITutorial
ou = People
ou=Groups
ou=NewHires
Now what i want is there a way to get all the ou's in java for the given organization.
Any help would be greatly appreciated.

Mahmed
I would strongly say you need to refer the Workforce and Management guide
Which will explain you the complete details of the Organization
You need to get the basics for this because these BG and OU are going to be the foundation for the instance. So just by know the definition will not help you
Thanks
Regards
Ramesh Kumar S

HR ABAP: How to get the organizational unit for the penr as chief

Hi ,
I am new to HR ABAP. Could any one specify if we have a PERNR how we can get the possible values for Orga units,positions and the personal areas that this PERNR as chief.
Thanks in advance,

Hi,
<li>Check the table PA0001 which contains Org unit(ORGEH), Position(PLANS), Personal Area(WERKS) assigned to PERNR.
<li>Use SELECT query to get those if you don't use Logical database PNP.
Thanks
Venkat.O

Getting the organization unit of a responsibility used ...

Hi,
Are there any manners to get the organization unit according to the responsility the user selected...????
For example...
Assume that the user has the following responsibility:
inventory employee <-----------role as a single inv. employee(access only to view)
admin of inventory N234 <-----------role as an admin to this particular inventory(access to view, edit, check, ...)
admin of inventory N239 <-----------role as an admin to this particular inventory(access to view, edit, check, ...)
e.t.c..
How is it possible to correlate the responsibilities 2,3 (of the above list) to the organization units(units of a company) coded as 234, 239 respectively..???
I assume that this can be done using a profile (at responsibility level and/or user level)...In this case is there any profile name i can use..or i should create a new one...??? ----{I use the MO:Organization Unit to get the business group id/company}.
Is it possible to acheive the above through the use of a form parameter...(but the question is how to correlate the specific to an organization unit responsibility to a code representing this unit (inventory N234) without the use of a profile - as a second manner)...???
Note: I use 11.5.10 EBS
Many thanks,
Sim

Hi Sim,
One thing you need to be carefull about is in what context you need the ID of a certain organizational unit. There are different types of orgs that are in play at different times.
e.g. Operating Unit is the securing attribute for many subledgers such as Order Management, Accounts Receivables/Payables, Purchasing.
Inventory Unit is relevant when you look at Inventory Transactions, Costing, Planning etc.
If we assume that you are only interested in INV orgs then whenever you enter a form that deals with inventory related issue the user is prompted to choose an organization and the choice results in setting the context variable MFG_ORGANIZATION for the session.
If you want to control which Inventory Organization a user or responsibility has access to you go to Inventory > Setup > Organizations > Organization Access. Here you can restrict access by Responsibility. Take a carefull look into the help text to understand implications - I have copied the first couple of paragraphs:
+You can specify which organizations a responsibility can access by mapping responsibilities to organizations. Once this mapping is set up, a user logging into an Oracle Manufacturing product is restricted to the organizations mapped to the responsibility chosen. The Change Organization window is restricted as well.
Attention: Until you assign an organization to a responsibility in this window, all responsibilities have access to all organizations. Once you have restricted any responsibility to an organization, you must then explicitly define the organizations which all responsibilities can access.
Attention: This feature does not restrict access once the user is in the product. Users with access to functions that cross multiple organizations (such as ATP, Inter-organization Transfers, Item Search, Multi-organization Quantity Report, and so on) can still specify any valid organization when running these functions.+
/Niels LM

How to get the organization structures of a compnay code (BUKRS)?

Hi Friends,
I have a requirement to get the organization structures of a compnay code (BUKRS), such as Controlling area, Credit control area, Plant, Sales Organization, Purch. Organization, Personnel area.
How can I get them, I only know the compnay code table is T001, but how to get the organization structures of a compnay code (BUKRS) into a internal table?
Thanks a lot!

Hi,
A lot of table will be involved for the same.
The company code is the highest unit and all other things are assigned to it.
Check the settings in SPRO as to how the maintainance is done.
From here you will get the maintainance view details if you do F1 help on each field.
From this view you can get the relevant tables.
For eg.
Go to SPRO>Controlling>Organization-->Maintain Controlling Area
Here you will find the assignment of controlling area to the company code.
The maintainance view is V_TKA02 and the tables involved are TKA02, TKA01, T001
In this way you can find the relevant tables.
Regards,
Ankur Parab

PS: How to get the hierarchy of a level 1 WBS only?

Hi,
This corresponds to Projects System module.
If we have 5 level 1 WBS elements.Out of them if I want to get only the WBS hierarchy corresponding to a level 1 WBS element (say 2nd level 1 WBS element).
I know that we can get all the WBS elements' hierarchy from BAPI_PROJECT_GETINFO. But I want the hierarchy for only one level 1 WBS element not for all. How?

you could read them from SETNODE table with SETCLASS = '0110'

How to get the results in one line

Hi
if i use the script below i get the name of path and then : and in next line i get the results.is there a way to get the results from every path after the : and not in the next line?
another question - is there a way that the script will not show the server name on every path?
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter
THC

If you take you script and pipe it to get member, it will give you a list of various script properties.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | get-member
You will see that the object type returned by "Get-Counter" is Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet.
TypeName:
Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet
Name MemberType Definition
Equals Method bool Equals(System.Object obj)
GetHashCode Method int GetHashCode()
GetType Method type GetType()
ToString Method string ToString()
CounterSamples Property Microsoft.PowerShell.Commands.GetCounter.Perfo...
Timestamp Property datetime Timestamp {get;set;}
Readings ScriptProperty System.Object Readings {get=$strPaths = ""...
You can try grabbing different properties, and they will print out differently, displaying the data on the same line in some cases. For example, pipe your output to a "foreach-object" block, and then for each object print out the CounterSamples property.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | foreach-object { ($_).CounterSamples }
This should all print on one line now. However, you also asked if there was a way to not have the server print out on every line. The way to control the format of these outputs is to use the "format-table" cmdlet. So you would pipe your output to format-table
and then give it various options. This is how you would pipe it (without any options).
(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | object { ($_).CounterSamples | format-table }#OR USE YOUR ORIGINAL CODE(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | format-table }
Now, it's up to you to give format-table the options you want. With no options, output will look unchanged. To see what options are available to you, use get-help.
get-help format-table
I hope this helps!
Thank for all the info...

How to get the Organizer page to install when only the Editor page appeared after Elements12 installation?

I Can't figure out if it is possible to retrieve/install the Organizer page after only the Editor page installed on Elements 12. If it is possible, how do I do it?

When I launch PSE 12 directly I do get the "welcome" screen first. If I then click on the Organizer box it gives the moving line for a bit, and then nothing more: no Organizer screen ever appears. However when I click on the Editor box the Editor screen does come up after the moving line starts.
By the way, I've long used PSE 10, and that still works for both screens, so I'm now having to jerryrig the post production process by using the Organizer screen from version 10 to access my photos and then drag them to the Editor screen from version 12 !
I bought PSE 12 because it accomodates/processes/edits in RAW, where version 10 doesn't. I sure don't want to have to pay for version 13, and Adobe chat no longer supports version 12, so any help you can offer would be wonderful !!!
By the way -- in addition, a very useful plug-in (Nik Collection) that i've come to love to use with version 10 doesn't appear with version 12's Editor screen at all. So if you have any thoughts about how to fix that I would really appreciate that too !
Thanks in advance. -- Jessie
Sent via the Samsung Galaxy Note® II, an AT&T 4G LTE smartphone

How to get the value in one JSP page to another?

Hi,
I have problems in passing the value around in JSP. I have two JSP pages as below:
test1.jsp
I try to get the vaule from my textbox by using:
String strUser = request.getParameter ("strUserName");
Then i print out by using: out.print(strUser); then i can get the value and put on my page (For example, i get ABC on my page).
test2.jsp
Next, i want to get the value from strUser (which mean that the one i already display on page in test1.jsp, ABC) to insert into my table by using INSERT INTO statement. Then i try by using
String strUser1 = request.getParameter ("strUser");
Is it possbile for me to do that? I cannot get anything to insert into my table. Then i tried out.print(strUser1); then i found that i get NULL value.
Could you please give me some guidance?
Thanks you very much for any advise you may give me.
Kimsan

Hi,
Thank you very much for your help. It's working fine if i just get a one value to another page, however, i have problem while i pass the value in my loop to another page because i always get the last record. I try with the following code:
logged_page.jsp
<html>
<head>
<title>Welcome to the online Auction...</title></head>
<body>
<%@ page language ="java" import = "java.io.*, java.lang.*, java.sql.*" %>
<% try
     String strUsername = request.getParameter("username");
     session.setAttribute("myUserName", strUsername);
     String strPassword = request.getParameter("password");
     Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
     Connection myConn = DriverManager.getConnection("jdbc:odbc:Driver={MicroSoft Access Driver (*.mdb)};DBQ=C:/Auction/Auction.mdb");
     String strSQL = "SELECT [UserName], [Password] FROM tblUserDetails where [UserName] = ? and [Password] = ?";
     PreparedStatement statement = myConn.prepareStatement(strSQL);
     statement.setString(1, strUsername);
     statement.setString(2, strPassword);
     ResultSet myResult = statement.executeQuery();
     if(myResult.next())
     //out.println("Login Succesful! A record with the given user name and password exists");
     out.print("<center><h1>");
     out.print("Welcome ");
     out.print(strUsername);
     out.print("</h1></center>");
     out.print("<center>");
     out.print("<BR><BR>");
     out.print("<font font face = Viner Hand ITC size= 5>Products on sales</font>");
     out.print("<BR><BR>");
     Statement myStatement = myConn.createStatement ();
     ResultSet myResult1 = myStatement.executeQuery("SELECT * FROM tblProduct");
     ResultSetMetaData myResultSet = myResult1.getMetaData();
     out.println("<font face=Tahoma>");
     out.print("<table border=1 CELLSPACING=0>");
     out.print("<TR>");
     out.print("<TD width = 200> Item Title");out.print("</TD>");
     out.print("<TD width = 200> Description");out.print("</TD>");
     out.print("<TD width = 200> Current bid");out.print("</TD>");
     out.print("<TD width = 200> Available Time");out.print("</TD>");
     out.print("<TD width = 200> Place Bid");out.print("</TD>");
     out.print("</TR>");
     out.print("</table>");
     while(myResult1.next())
          String strProName = myResult1.getString(1);
          session.setAttribute("myProName", strProName);
          out.print("<table border=1 CELLSPACING=0>");
          out.print("<TR>");
          out.print("<TD width = 200>");
          out.println(strProName);
          out.print("</TD>");
          out.print("<TD width = 200>");
          out.println(myResult1.getString(3));
          out.print("</TD>");
          out.print("<TD width = 200>");
          out.println(myResult1.getString(2));
          out.print("</TD>");
          out.print("<TD width = 200>");
          out.println(myResult1.getString(4));
     out.print("</TD>");
     out.print("<TD>");
          out.print("<form action=bid_page.jsp method=post>");
          out.print("<input type=text name=place_bid>");
          out.print("<input type=submit name=okfunc value=Bid>");
          out.print("</TD>");
          out.print("</form>");
          out.print("</TR>");
          out.print("</table>");
          out.println("</font>");
          out.print("</center>");
     else
          out.print("<center>");
          out.print("Sorry ");
          out.print("<font color = RED size = 5>");
          out.print(strUsername);
          out.print("</font>");
          out.print(" could not be found.");
          out.print("</center>");
     myResult.close();
     statement.close();
     myConn.close();
     catch(SQLException e)
     out.println(e);
%>
</body>
</html>
bid_page.jsp
<HTML>
<HEAD>
<TITLE>Welcome to the online Auction...</TITLE>
</HEAD>
<BODY>
<%@ page language ="java" import = "java.io.*" import = "java.lang.*" import = "java.sql.*" %>
<% try
     String thisUserName = (String) session.getAttribute("myUserName");
     String thisProName = (String) session.getAttribute("myProName");
          Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
     Connection myConn = DriverManager.getConnection("jdbc:odbc:Driver={MicroSoft Access Driver (*.mdb)};DBQ=C:/Auction/Auction.mdb");
     PreparedStatement myStatement = myConn.prepareStatement("INSERT INTO tblHistory VALUES ('"+thisUserName+"', '"+thisProName+"', '"+request.getParameter("place_bid")+"')");
          myStatement.executeUpdate();
          myConn.commit();
          myStatement.close();
          myConn.close();
          catch(Exception e){}
%>
</BODY>
</HTML>
When i click on the BID button in the logged_page.jsp then i always get the last record and save into my table and that is not what i want to. i want to get the result on the same row as the BID button that just click and save to my table.
Could you please advise?
Thanks you very much for your time and any consideration you may give me.
Best Regard,
Kimsan

BAPI_SALESORDER_SIMULATE How to get the conditions on header level?

Hi,
is it possible to get the pricing conditions on header level (sales order) with the Bapi BAPI_SALESORDER_SIMULATE?
We only found the information on item level?
Thanks a lot.

hope its possible,
If don't specify any item no for condition type in bapi, then it will be consider as header condition.
make sure condition should be header condition.
hope it will work.
Regards,
Marreddy

I wonder how to get the data entries one week to be uploaded into BW system

HI,SDNs
Our clients requires us to get the whole data entries to be loaded into bw system fo r onw week or get the delta data number to be loaded
How to deal with it?
thanks and best regards

Dear Terry,
In the InfoPackage selection, you can provide the week for which you want to load the data.
If it does not help, then could you please elaborate yoyr problem.
Best Regards,
Ankit Agrawal
P.S.: Assign points if helpful

How to get the data in one internal table? with 3 different tables..

Hi,
i need to get the all the ff data to put in an internal table. I'm using these data to my ALV. Thanks
   vkorg TYPE a005-vkorg,
   vtweg TYPE a005-vtweg,
   kschl TYPE a005-kschl,
   kondm TYPE mvke-kondm,
   matnr TYPE a005-matnr,
   kdgrp TYPE knvv-kdgrp,
   konda TYPE knvv-konda,
   kunnr TYPE a005-kunnr,
   datab TYPE a005-datab,

hi,
try this
*& Report ZPROGRAM
REPORT ZPROGRAM.
table declaration.
tables : zemployee, zdepartment,zproject.
*type-pools declaration
type-pools : slis , icon.
type specification
types : begin of ty_emp,
        empid type zempid,
        empname type zempname,
        empaddress type zempaddress,
        city type zcity,
        ponumber type zponumber,
        detid type zdeptid,
        end of ty_emp.
types : begin of ty_dept,
        detid type zdeptid,
        deptname type zdeptname,
        designation type zdesignation,
        projectid type zprojectid,
        end of ty_dept.
types : begin of ty_project,
        projectid type zprojectid,
        technology type ztechnology,
        clientname type zclientname,
        end of ty_project.
types : begin of ty_final,
        empid type zempid,
        empname type zempname,
        empaddress type zempaddress,
        city type zcity,
        ponumber type zponumber,
        detid type zdeptid,
        deptname type zdeptname,
        designation type zdesignation,
        projectid type zprojectid,
        technology type ztechnology,
        clientname type zclientname,
       average type p decimals 2,
        end of ty_final.
table type specification.
types : tt_emp type standard table of ty_emp,
        tt_dept type standard table of ty_dept,
        tt_project type standard table of ty_project,
        tt_final type standard table of ty_final.
work area creation.
data : wa_emp type ty_emp,
       wa_dept type ty_dept,
       wa_project type ty_project,
       wa_final type ty_final.
internal table declaration
data : itab_emp type tt_emp,
        itab_dept type tt_dept,
        itab_project type tt_project,
        itab_final type tt_final.
layout declaration
data : gd_layout type slis_layout_alv.
assigning current program name.
data : gd_repid like sy-repid.
         gd_repid = sy-repid.
fieldcatalog declaration.
data : d_fieldcat type slis_t_fieldcat_alv,
         d_fieldcat_wa type slis_fieldcat_alv.
header declaration.
data : t_header type slis_t_listheader,
         wa_header type slis_listheader,
         linecount(10) type c,
         line(10) type c.
selection-screen.
selection-screen : begin of block blk1 with frame title text-001.
select-options : s_empid for zemployee-empid.
parameters : p_dname like zdepartment-deptname.
parameters : p_proid like zproject-projectid.
selection-screen : begin of line.
parameters : p_rad1 radiobutton group r1.
selection-screen comment 3(10) text-002.
parameters : p_rad2 radiobutton group r1.
selection-screen comment 16(10) text-003.
selection-screen : end of line.
parameters : chk1 as checkbox.
selection-screen : end of block blk1.
end of selection screen.
start of selection.
select empid empname empaddress city ponumber detid from zemployee into corresponding fields of table itab_emp where empid in s_empid.
if not itab_emp is initial.
select detid deptname designation projectid from zdepartment into corresponding fields of table itab_dept for all entries in itab_emp where detid = itab_emp-detid .
if not itab_dept is initial.
select projectid technology clientname from zproject into corresponding fields of table itab_project for all entries in itab_dept where projectid = itab_dept-projectid.
endif.
endif.
*end of selection.
populating data into itab_final from itab_emp.
loop at itab_emp into wa_emp.
wa_final-empid = wa_emp-empid.
wa_final-empname = wa_emp-empname.
wa_final-empaddress = wa_emp-empaddress.
wa_final-ponumber = wa_emp-ponumber.
wa_final-city = wa_emp-city.
wa_final-detid = wa_emp-detid.
append wa_final to itab_final.
clear wa_final.
endloop.
*populating data into itab_final from itab_dept and itab_project
loop at itab_final into wa_final.
read table itab_dept into wa_dept with key detid = wa_final-detid.
if sy-subrc = 0.
wa_final-deptname = wa_dept-deptname.
wa_final-designation = wa_dept-designation.
wa_final-projectid = wa_dept-projectid.
modify itab_final from wa_final transporting deptname designation projectid .
endif.
read table itab_project into wa_project with key projectid = wa_final-projectid.
if sy-subrc = 0.
wa_final-technology = wa_project-technology.
wa_final-clientname = wa_project-clientname.
modify itab_final from wa_final transporting technology clientname.
endif.
endloop.
if p_rad1 = 'X' or chk1 = 'X'.
d_fieldcat_wa-fieldname = 'EMPID'.
d_fieldcat_wa-seltext_l = 'Employee Id'.
d_fieldcat_wa-emphasize = 'X'.
d_fieldcat_wa-col_pos = 1.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'EMPNAME'.
d_fieldcat_wa-seltext_l = 'Employee Name'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 2.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'EMPADDRESS'.
d_fieldcat_wa-seltext_l = 'Employee Address'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 3.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'CITY'.
d_fieldcat_wa-seltext_l = 'City'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 4.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'PONUMBER'.
d_fieldcat_wa-seltext_l = 'Postal Number'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 5.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'DETID'.
d_fieldcat_wa-seltext_l = 'Department Id'.
d_fieldcat_wa-emphasize = 'X'.
d_fieldcat_wa-col_pos = 6.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'DEPTNAME'.
d_fieldcat_wa-seltext_l = 'Department Name'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 7.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'DESIGNATION'.
d_fieldcat_wa-seltext_l = 'Designation'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 8.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'PROJECTID'.
d_fieldcat_wa-seltext_l = 'Project Id'.
d_fieldcat_wa-emphasize = 'X'.
d_fieldcat_wa-col_pos = 9.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'TECHNOLOGY'.
d_fieldcat_wa-seltext_l = 'technology'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 10.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'CLIENTNAME'.
d_fieldcat_wa-seltext_l = 'Client Name'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 11.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
endif.
if p_rad2 = 'X' or chk1 = 'X'.
refresh itab_emp.
d_fieldcat_wa-fieldname = 'DETID'.
d_fieldcat_wa-seltext_l = 'Department Id'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 6.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'DEPTNAME'.
d_fieldcat_wa-seltext_l = 'Department Name'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 7.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'DESIGNATION'.
d_fieldcat_wa-seltext_l = 'Designation'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 8.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'PROJECTID'.
d_fieldcat_wa-seltext_l = 'Project Id'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 9.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'TECHNOLOGY'.
d_fieldcat_wa-seltext_l = 'technology'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 10.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'CLIENTNAME'.
d_fieldcat_wa-seltext_l = 'Client Name'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 11.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
endif.
Grid display function module
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_INTERFACE_CHECK                 = ' '
   I_BYPASSING_BUFFER                = ' '
   I_BUFFER_ACTIVE                   = ' '
    I_CALLBACK_PROGRAM                = gd_repid
    I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
   I_CALLBACK_USER_COMMAND           = ' '
    I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE '
   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
   I_CALLBACK_HTML_END_OF_LIST       = ' '
   I_STRUCTURE_NAME                  =
   I_BACKGROUND_ID                   = ' '
    I_GRID_TITLE                      = 'EMPLOYEE DETAILS'
   I_GRID_SETTINGS                   =
    IS_LAYOUT                         = gd_layout
    IT_FIELDCAT                       = d_fieldcat
   IT_EXCLUDING                      =
   IT_SPECIAL_GROUPS                 =
   IT_SORT                           =
   IT_FILTER                         =
   IS_SEL_HIDE                       =
   I_DEFAULT                         = 'X'
   I_SAVE                            = ' '
   IS_VARIANT                        =
   IT_EVENTS                         =
   IT_EVENT_EXIT                     =
   IS_PRINT                          =
   IS_REPREP_ID                      =
   I_SCREEN_START_COLUMN             = 0
   I_SCREEN_START_LINE               = 0
   I_SCREEN_END_COLUMN               = 0
   I_SCREEN_END_LINE                 = 0
   I_HTML_HEIGHT_TOP                 = 0
   I_HTML_HEIGHT_END                 = 0
   IT_ALV_GRAPHICS                   =
   IT_HYPERLINK                      =
   IT_ADD_FIELDCAT                   =
   IT_EXCEPT_QINFO                   =
   IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
   E_EXIT_CAUSED_BY_CALLER           =
   ES_EXIT_CAUSED_BY_USER            =
   TABLES
     T_OUTTAB                          = itab_final
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
set pf_status for creating client specified icons.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'NEWSTATUS'.
endform.
populating data into header using top_of_page
form top_of_page.
wa_header-typ = 'H'.
wa_header-info = 'ALV REPORT'.
append wa_header to t_header.
clear wa_header.
wa_header-typ = 'S'.
wa_header-key = 'Date :'.
Concatenate sy-datum+6(2) '.'
             sy-datum+4(2) '.'
             sy-datum(4) into wa_header-info.
append wa_header to t_header.
clear wa_header.
wa_header-typ = 'S'.
wa_header-key = 'Time :'.
Concatenate sy-Uzeit(2) '.'
             sy-datum+2(2) '.'
             sy-datum+4(2) into wa_header-info.
append wa_header to t_header.
clear wa_header.
describe table itab_final lines line.
wa_header-typ = 'A'.
linecount = line.
Concatenate 'Total number of records :' linecount into wa_header-info separated by space.
append wa_header to t_header.
clear wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = t_header
     I_LOGO                   = 'VMCADMIN'
    I_END_OF_LIST_GRID       =
    I_ALV_FORM               =
endform.
*designing layout.
form gd_layout.
gd_layout-zebra = 'X'.
gd_layout-edit = 'X'.
gd_layout-no_hotspot = ''.
gd_layout-no_colhead = ''.
gd_layout-colwidth_optimize = 'X'.
endform.
Reward with points if helpful.

How to determine the organizational unit using activity category ????????

Hello All
We are working on CRM 7.0 , we need to have the organizational determination based on the activity category , I have put the activity category in the attribute list then I created a determination rule type responsibility and it is working fine in the simulation but after I assigned the determination rule to the transaction type the organizational unity could not be determined. I tried the BADI CRM_ORGMAN_BADI but it was not help.
Any clues regarding this issue ?
Regards
Jacopo

No answers

How to get the Business Unit

Hello everyone,
Am working in Oracle Application R12,
to make the purchase order I have to made the request,
In the request window I am selecting the Business Unit(BU) name from the flex field values,
Is it possible to directly fetch or load the business Unit name based on the Responsibility name,
For example If my Responsibility name is xxxx then correponding Business Unit code should be loaded,
I should not select it by clicking Flex field.
Thank you.

Gurujothi wrote:
Hi Mahendra,
Here am trying to create the Purchase order,but before creating a Po I have to create the Requisition for the Po then it should be approved then only i can create the Po for the approved item,
Here in creating a Request window only I need that Business unit based on the Responsibility.
Thank you.Business unit you mean here is the operating unit..correct
It will be set by profile options for each resp's..MO Operating Unit
so that whatever the requisition you create will be under this..
If you are R12 we can have MOAC enabled so that without changing resp..you can create req's in different OU's
HTH
Mahendra

How to get the value from one Popup lov column to another popup lov column

Hi,
I am new to oracle apex development and having the below issue.
In my application, there is a tabular form with 15 columns ( c1.. c15).
I have to populate the value of column C5 based on the selected(from popup lov) value of column C3, tried to use onchange, but didn't help much.
Any help please.
Thanks and Regards,

Oh boy, this is a fun one.
onchange should work theoretically (in this example, assume that f05 is the target column that should be set and "this" is the source item whose value is to be transferred to f05 on the same row (row 2)):
onchange=$s('f05_0002',$v(this));
BUT the catch is of course that needs to be different for every row (can't hardcode the '2'), so you need something to dynamically create the row number component.
I wrote this for an app I'm working on that uses master-detail forms heavily (I also wrote a lot more code to read the fmap array that is in v4 so that I can reference my cells via their column name and not the numeric position (so "f05 can be determined w/o hard coding), insulating against columns moving around, columns being made display-only etc. but I won't bore you with that here unless you really need to know).
function getRow(pObj)
{ //Pass in an object reference to a tabular form cell and get back an integer
//derived from the object ID.
var vRow=pObj.id.substr(pObj.id.indexOf("_")+1);
if (isNaN(vRow))
    return (null);
return (parseInt(vRow,10));
function formatRow(pRow)
{ //Pass in an integer and it'll be returned as the tabular form cell ID suffix
//(e.g.: pass in 1 and get back string "_0001").
//Used in building ID references to tabular form cells.
if((isThingEmpty(pRow)) || (isNaN(pRow)))
    return(null);
var vRow=pRow.toString();
while(vRow.length<4)
    vRow="0"+vRow;
return("_"+vRow);
}Therefore:
onchange=$s('f05_'+formatRow(getRow(this)),$v(this));
So in essence, pass in "this" which will be a reference to the current item, largely to determine what row we're on. getRow will return 1, 2, 3, etc. formatRow will take that and return 0001, 0002, 0003, etc. Once that is done, it'll concatenate with the f05 and f04 to refer to the correct columns (determining f05, f04, etc. dynamically is another matter if you really need to but I didn't want to complicate this answer too much at once).
Note: above I also use a isThingEmpty() function that I wrote. It does nothing other than check the item for an empty string, if the item is null, etc. Just do your own evaluation of empty-string, no-value, etc. there.
It would indeed be nice though if Apex had a better way to delclaratively access the tabular form items though. Despite all the v4 enhancements, tabular forms were not entirely upgraded to the same full functionality of page items.

How to get the Organizational Unit One level up

Similar Messages

Maybe you are looking for