How to get the Organization Units

Hello,
I have set up a LDAP server with JNDI Tutorial example. I have been able to search, list and also get the attributes from the server. But what i need to know is there a way to get the Organization Units in java.
ie. o = JNDITutorial
ou = People
ou=Groups
ou=NewHires
Now what i want is there a way to get all the ou's in java for the given organization.
Any help would be greatly appreciated.

Mahmed
I would strongly say you need to refer the Workforce and Management guide
Which will explain you the complete details of the Organization
You need to get the basics for this because these BG and OU are going to be the foundation for the instance. So just by know the definition will not help you
Thanks
Regards
Ramesh Kumar S

Similar Messages

How to get the Organizational Unit One level up

Hi
Does any one know any function module to get the org unit one level up by giving the current Organizational unit as input. Please reply very urgent.

Hello Nirmal
I am usually using the following function module to read to OM:
* SAP_SORG
* OrgStructure with assigned orgunits)
 REFRESH: lt_struc.
 CALL FUNCTION 'RHPH_STRUCTURE_READ'
 EXPORTING
 plvar = '01' " active Planvar.
 otype = 'O' " OrgUnit
 objid = l_wa_cb1-objid " Toplevel-Node
 wegid = 'SAP_SORG'
 begda = iw_begda
 endda = iw_endda
 pup_info = 'X'
 with_stext = 'X'
 tdepth = 0 " alle Sub-Levels
 TABLES
 stru_tab = lt_struc
 EXCEPTIONS
 catalogue_problem = 1
 root_not_found = 2
 wegid_not_found = 3.
The parameter WEGID is the crucial on which determines the objects that are read from the OM. In your case you will need WEGID = 'A002' (reports (line) to).
To understand the evaluation path (WEGID) better have a look at transaction PPST.
Regards
Uwe

HR ABAP: How to get the organizational unit for the penr as chief

Hi ,
I am new to HR ABAP. Could any one specify if we have a PERNR how we can get the possible values for Orga units,positions and the personal areas that this PERNR as chief.
Thanks in advance,

Hi,
<li>Check the table PA0001 which contains Org unit(ORGEH), Position(PLANS), Personal Area(WERKS) assigned to PERNR.
<li>Use SELECT query to get those if you don't use Logical database PNP.
Thanks
Venkat.O

Getting the organization unit of a responsibility used ...

Hi,
Are there any manners to get the organization unit according to the responsility the user selected...????
For example...
Assume that the user has the following responsibility:
inventory employee <-----------role as a single inv. employee(access only to view)
admin of inventory N234 <-----------role as an admin to this particular inventory(access to view, edit, check, ...)
admin of inventory N239 <-----------role as an admin to this particular inventory(access to view, edit, check, ...)
e.t.c..
How is it possible to correlate the responsibilities 2,3 (of the above list) to the organization units(units of a company) coded as 234, 239 respectively..???
I assume that this can be done using a profile (at responsibility level and/or user level)...In this case is there any profile name i can use..or i should create a new one...??? ----{I use the MO:Organization Unit to get the business group id/company}.
Is it possible to acheive the above through the use of a form parameter...(but the question is how to correlate the specific to an organization unit responsibility to a code representing this unit (inventory N234) without the use of a profile - as a second manner)...???
Note: I use 11.5.10 EBS
Many thanks,
Sim

Hi Sim,
One thing you need to be carefull about is in what context you need the ID of a certain organizational unit. There are different types of orgs that are in play at different times.
e.g. Operating Unit is the securing attribute for many subledgers such as Order Management, Accounts Receivables/Payables, Purchasing.
Inventory Unit is relevant when you look at Inventory Transactions, Costing, Planning etc.
If we assume that you are only interested in INV orgs then whenever you enter a form that deals with inventory related issue the user is prompted to choose an organization and the choice results in setting the context variable MFG_ORGANIZATION for the session.
If you want to control which Inventory Organization a user or responsibility has access to you go to Inventory > Setup > Organizations > Organization Access. Here you can restrict access by Responsibility. Take a carefull look into the help text to understand implications - I have copied the first couple of paragraphs:
+You can specify which organizations a responsibility can access by mapping responsibilities to organizations. Once this mapping is set up, a user logging into an Oracle Manufacturing product is restricted to the organizations mapped to the responsibility chosen. The Change Organization window is restricted as well.
Attention: Until you assign an organization to a responsibility in this window, all responsibilities have access to all organizations. Once you have restricted any responsibility to an organization, you must then explicitly define the organizations which all responsibilities can access.
Attention: This feature does not restrict access once the user is in the product. Users with access to functions that cross multiple organizations (such as ATP, Inter-organization Transfers, Item Search, Multi-organization Quantity Report, and so on) can still specify any valid organization when running these functions.+
/Niels LM

How to get the organization structures of a compnay code (BUKRS)?

Hi Friends,
I have a requirement to get the organization structures of a compnay code (BUKRS), such as Controlling area, Credit control area, Plant, Sales Organization, Purch. Organization, Personnel area.
How can I get them, I only know the compnay code table is T001, but how to get the organization structures of a compnay code (BUKRS) into a internal table?
Thanks a lot!

Hi,
A lot of table will be involved for the same.
The company code is the highest unit and all other things are assigned to it.
Check the settings in SPRO as to how the maintainance is done.
From here you will get the maintainance view details if you do F1 help on each field.
From this view you can get the relevant tables.
For eg.
Go to SPRO>Controlling>Organization-->Maintain Controlling Area
Here you will find the assignment of controlling area to the company code.
The maintainance view is V_TKA02 and the tables involved are TKA02, TKA01, T001
In this way you can find the relevant tables.
Regards,
Ankur Parab

How to get the Organizer page to install when only the Editor page appeared after Elements12 installation?

I Can't figure out if it is possible to retrieve/install the Organizer page after only the Editor page installed on Elements 12. If it is possible, how do I do it?

When I launch PSE 12 directly I do get the "welcome" screen first. If I then click on the Organizer box it gives the moving line for a bit, and then nothing more: no Organizer screen ever appears. However when I click on the Editor box the Editor screen does come up after the moving line starts.
By the way, I've long used PSE 10, and that still works for both screens, so I'm now having to jerryrig the post production process by using the Organizer screen from version 10 to access my photos and then drag them to the Editor screen from version 12 !
I bought PSE 12 because it accomodates/processes/edits in RAW, where version 10 doesn't. I sure don't want to have to pay for version 13, and Adobe chat no longer supports version 12, so any help you can offer would be wonderful !!!
By the way -- in addition, a very useful plug-in (Nik Collection) that i've come to love to use with version 10 doesn't appear with version 12's Editor screen at all. So if you have any thoughts about how to fix that I would really appreciate that too !
Thanks in advance. -- Jessie
Sent via the Samsung Galaxy Note® II, an AT&T 4G LTE smartphone

How to determine the organizational unit using activity category ????????

Hello All
We are working on CRM 7.0 , we need to have the organizational determination based on the activity category , I have put the activity category in the attribute list then I created a determination rule type responsibility and it is working fine in the simulation but after I assigned the determination rule to the transaction type the organizational unity could not be determined. I tried the BADI CRM_ORGMAN_BADI but it was not help.
Any clues regarding this issue ?
Regards
Jacopo

No answers

How to get the Business Unit

Hello everyone,
Am working in Oracle Application R12,
to make the purchase order I have to made the request,
In the request window I am selecting the Business Unit(BU) name from the flex field values,
Is it possible to directly fetch or load the business Unit name based on the Responsibility name,
For example If my Responsibility name is xxxx then correponding Business Unit code should be loaded,
I should not select it by clicking Flex field.
Thank you.

Gurujothi wrote:
Hi Mahendra,
Here am trying to create the Purchase order,but before creating a Po I have to create the Requisition for the Po then it should be approved then only i can create the Po for the approved item,
Here in creating a Request window only I need that Business unit based on the Responsibility.
Thank you.Business unit you mean here is the operating unit..correct
It will be set by profile options for each resp's..MO Operating Unit
so that whatever the requisition you create will be under this..
If you are R12 we can have MOAC enabled so that without changing resp..you can create req's in different OU's
HTH
Mahendra

How to pass Nested Organization Units (ou) for the provisioning purposes

I have defiend an Entity Adapter which would check the input string and create the Organization Units (such as ou=accounting, ou=finance, o=mycompany) tree and then update the Orgainzation name of Novell Edir User with this new value. The input string is from the Peoplesoft as trusted resource (we use some complext business logic to map to the proper ou tree structure in the Novell Edirectory).
But, I got the cACT/eventPreUpdate Error :Dataobject contains invalid characters
when OIM trying to create the user before provisioning to Novell Edirectory.
Since the ou tree sturcture is used by the pSearchbase during Novell Edir provisioning process, and it should be in the form of ou=accounting, ou=finance, o=mycompany, I am wondering if you know how to solve this problem.
Thanks
Ken Huang

ILovePlSql wrote:
V_bom_header_tbl.assembly_item_name:= l_bom_header_tbl(i).assembly_item_name ;
v_bom_header_tabl is a record type and l_bom_header_tbl is a table type .So is the above statement ok?I asked you for type definition. Please provide definition of BOM_BO_PUB.BOM_HEADER_TBL_TYPE and Bom_Bo_Pub.Bom_Head_Rec_Type. If BOM_BO_PUB.BOM_HEADER_TBL_TYPE is table of Bom_Bo_Pub.Bom_Head_Rec_Type then your statment is OK. For example:
SQL> declare
2      type BOM_HEADER_TBL_TYPE is table of emp%rowtype index by binary_integer;
3      l_bom_header_tbl BOM_HEADER_TBL_TYPE;
4      V_bom_header_tbl emp%rowtype;
5 begin
6      select * bulk collect into l_bom_header_tbl from emp;
7      for i in 1 .. l_bom_header_tbl.count loop
8        V_bom_header_tbl.ename := l_bom_header_tbl(i).ename;
9      end loop;
10 end;
11 /
PL/SQL procedure successfully completed.
SQL> SY.

How to get the Useru2019s position when the user doesnu2019t have CP relation

We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
Regards
Paul

Hi Paul,
Have a look at these tables.
Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
Central business partner address data
The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
Relationships between business partners
Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
Hope this helps,
Kind Regards,
Matthew

How to get the "current date" in the BEx?

Hi all,
I need to get the "current date" in my Bex report in order to make a comparison. I know there is a "How to" which shows how to get the current date via a User Exit, but I didn't find it. Could you please help me?
Thanks

1. Create a New Formula in Key Figures structure
2. Give tech name and description and Select "New variable" option
3. Next screen will launch Variable Wizard -> create a new variable with replacement path as processing type
4. in next screene select the date characteristic that represents the first date to use in the calculation (From Date)
5. In the next screen select Key in the Replace Variable with field. Leave all the other options as they are
6. In the next Currencies and Units screen select Date as the Dimension ID.
6. Save variable
repeate the Above steps to create another variable (To Date)
and now you can use these two new replacement path variables in your new formula.
Dev

How to Get the Current Workitem id at runtime

Hi All,
I have a scenario, where request pending with a user who has already resigned the organization. The requirement is that we need to provide a report
of the request and with whom it is pending with along with the workitem id with a forward push button.
So that if the user identifies that a request is pending with someone he can click the record and press for the forward button and a pop-up to be showed where he can enter the userid to whom he needs to forward it.
In this scenario can anyone tell me how to get the current workitem id at run time and to save it to a custom table.
I tried with method before workitem execution, but here i am not getting the current workitem id.
Can you please suggest a good solution for this.
Thanks and Regards,
Balaji

Karri,
I think i can explain you with an example.
Here is my Scenario.
A user has raised a Gate pass and it went to all approval's and got approved and the material is also sent out from the plant. Lets take the date as 1.1.2013 (A Warehouse person have done the checking and sent out of the plant).
On 1.3.2013 some of the material has been returned and a material inward request has been raised and now the warehouse person has to do a inward checking and to sent it back for the initiator for the approval, but the warehouse person has resigned the organization on 1.2.2013, now the workitem is pending with the warehouse person who has already resigned.
My scenario is once the material inward request is created and before the workitem is delivered to the warehouse person i need to get the workitem id and to store the workitem some where.
So that in future if any warehouse dept head wants to forward the workitem which are lying in the person inbox who has already resigned he can do it via a report using this workitem id.
So, can anyone help how to get the dialog workitem id before the workitem creation or execution. I tried with "method before workitem execution" but my break point is not triggering at this point.
Thanks and Regards,
Balaji

How to get the link between mara, ausp, cawn and cawnt tables

hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soni

Hi,
Sample report using the linkage between tables;
report batch_char no standard page heading
 line-size 132
 line-count 58(1)
 message-id mm.
 Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
 mard, " Storage Location Data for Material
 t001w, " Plants/Branches
 t001l, " Storage Locations
 cabn, " Characteristics
 inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
 c_obtab like inob-obtab value 'MCH1', " Database Table
 c_flag type c value 'X', " Flag
 c_c23 type i value '23', " Ratio
Constants for Ratio Categories
 c_13 type p decimals 2 value '13.00', " For Ratio 13
 c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
 c_15 type p decimals 2 value '15.00', " For Ratio 15
 c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
 c_17 type p decimals 2 value '17.00', " For Ratio 17
 c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
 c_19 type p decimals 2 value '19.00', " For Ratio 19
 c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
 c_21 type p decimals 2 value '21.00', " For Ratio 21
 c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
 c_23 type p decimals 2 value '23.00', " For Ratio 23
 c_g23(4) type c value '>=23', " For Ratio >=23
 c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
 c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
 " Unit of Measure
 c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
 " Material Number
 c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
 " Material Des.
 c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
 " Stock Value
 c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
 " Char.Value (Ratio)
 c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
 g_clabs1(16) type c, " Quantity
 g_clabs(18) type c, " Quantity
 g_cursor(15) type c, " Cursor field name
 g_matnr type mara-matnr, " Material Number
 g_werks type mchb-werks, " Plant
 g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
 matnr like mchb-matnr, " Material Number
 werks like mchb-werks, " Plant
 lgort like mchb-lgort, " Storage Location
 charg like mchb-charg, " Batch Number
 clabs like mchb-clabs, " Stock Value
 meins like mara-meins, " Unit of measure
 atflo like ausp-atflv, " Char.Value (Ratio)
 atflv like ausp-atflv, " Char.Value (Ratio)
 end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
 werks like mchb-werks, " Plant
 matnr like mchb-matnr, " Material Number
 lgort like mchb-lgort, " Storage Location
 charg like mchb-charg, " Batch Number
 atinn like ausp-atinn, " Char.Value
 clabs like mchb-clabs, " Stock Value
 atflo like ausp-atflv, " Char.Value (Ratio)
 atflv like ausp-atflv, " Char.Value (Ratio)
 end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
 werks like t001w-werks, " Plant
 name1 like t001w-name1, " Name
 end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
 matnr like makt-matnr, " Material
 maktx like makt-maktx, " Description
 end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
 objek like ausp-objek, " Object No
 atinn like cabn-atinn, " Characteric value
 atflv like ausp-atflv, " Characteristic Value
 end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
 atinn like cabn-atinn, " Characteric value
 werks like mchb-werks, " Plant
 matnr like mchb-matnr, " Material Number
 atnam like cabn-atnam, " Characteristic
 atflv like ausp-atflv, " Char.Value (Ratio)
 name1 like t001w-name1, " Plant Description
 maktx like makt-maktx, " Material Description
 clabs like mchb-clabs, " Stock Value
 meins like mara-meins, " Base Unit of Measure
 end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
 atinn like cabn-atinn, " Characteric value
 werks like mchb-werks, " Plant
 matnr like mchb-matnr, " Material Number
 atnam like cabn-atnam, " Characteristic
 atflv(32) type c, " Char.Value (Ratio)
 name1 like t001w-name1, " Plant Description
 maktx like makt-maktx, " Material Description
 clabs like mchb-clabs, " Stock Value
 meins like mara-meins, " Base Unit of Measure
 end of i_output1.
 Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
 s_lgort for t001l-lgort, " Stor.Location
 s_matnr for mara-matnr obligatory, " Material No
 s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
 perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
 perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
 Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
 select werks
 into t001w-werks
 from t001w
 up to 1 rows
 where werks in s_werks.
 endselect.
 if sy-subrc <> 0.
 message e899 with 'Enter Valid Plant'(002).
 endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
 select matnr
 into mara-matnr
 from mara
 up to 1 rows
 where matnr in s_matnr.
 endselect.
 if sy-subrc <> 0.
 message e899 with 'Enter Valid Material'(003).
 endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
 select lgort
 into t001l-lgort
 from t001l
 up to 1 rows
 where lgort in s_lgort.
 endselect.
 if sy-subrc <> 0.
 message e899 with 'Enter Valid Storage Location'(004).
 endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
 select atinn
 into cabn-atinn
 from cabn
 up to 1 rows
 where atinn in s_atinn.
 endselect.
 if sy-subrc <> 0.
 message e899 with 'Enter Valid Characteristic Value'(005).
 endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
 into (mard-matnr, mard-werks, mard-lgort)
 from mard
 up to 1 rows
 where matnr in s_matnr and
 werks in s_werks and
 lgort in s_lgort.
endselect.
if sy-subrc <> 0.
 message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
 exporting
 repid = l_repid
 heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
 20 sy-vline, 21(40) 'Material Description'(011) centered,
 61 sy-vline, 62(22) 'Ratio'(009) centered,
 84 sy-vline, 85(18) 'Quantity'(010) centered,
 103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
 125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
 b~werks " Plant
 b~lgort " Storage Location
 b~charg " Batch Number
 b~clabs " Stock Value
 a~meins " Base Unit of Measure
 into table i_mchb
 from mara as a inner join mchb as b
 on amatnr eq bmatnr
 where b~matnr in s_matnr and
 b~werks in s_werks and
 b~lgort in s_lgort.
if sy-subrc <> 0.
 g_exit = c_flag.
 message s899 with 'No Data found for the Selection Criteria'(006).
 stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
 clear i_plant.
 refresh i_plant.
 select werks " Plant
 name1 " Name
 into table i_plant
 from t001w
 for all entries in i_mchb
 where werks = i_mchb-werks.
Get the Material Description from MAKT Table
 clear i_makt.
 refresh i_makt.
 select matnr " Material number
 maktx " Material Description
 into table i_makt
 from makt
 for all entries in i_mchb
 where matnr = i_mchb-matnr and
 spras = sy-langu.
 sort i_plant by werks.
 delete adjacent duplicates from i_plant comparing werks.
 sort i_makt by matnr.
 delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
 l_tabix like sy-tabix.
if not i_mchb[] is initial.
 loop at i_mchb.
 l_tabix = sy-tabix.
 clear l_matbatch.
 concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
 move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
 read table i_plant with key werks = i_mchb-werks binary search.
 if sy-subrc = 0.
 i_output-name1 = i_plant-name1.
 endif.
Get the Material Description from i_makt Table
 read table i_makt with key matnr = i_mchb-matnr binary search.
 if sy-subrc = 0.
 i_output-maktx = i_makt-maktx.
 endif.
Get the Characteristic Values data from INOB and AUSP Tables
 clear inob.
 select single cuobj from inob
 into inob-cuobj
 where klart = c_klart and
 obtab = c_obtab and
 objek = l_matbatch.
 if sy-subrc = 0.
 select objek
 atinn
 atflv
 from ausp
 into table i_ausp
 where objek = inob-cuobj and
 atinn in s_atinn and
 klart = c_klart.
 sort i_ausp by objek atinn.
 loop at i_ausp.
 clear cabn.
 select single atinn atnam from cabn
 into (cabn-atinn,cabn-atnam)
 where atinn = i_ausp-atinn.
 if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
 if cabn-atnam cs c_ratio.
 if i_ausp-atflv between c_13 and c_1499.
 i_mchb-atflo = i_ausp-atflv.
 i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
 elseif i_ausp-atflv between c_15 and c_1699.
 i_mchb-atflo = i_ausp-atflv.
 i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
 elseif i_ausp-atflv between c_17 and c_1899.
 i_mchb-atflo = i_ausp-atflv.
 i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
 elseif i_ausp-atflv between c_19 and c_2099.
 i_mchb-atflo = i_ausp-atflv.
 i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
 elseif i_ausp-atflv between c_21 and c_2299.
 i_mchb-atflo = i_ausp-atflv.
 i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
 elseif i_ausp-atflv >= c_23.
 i_mchb-atflo = i_ausp-atflv.
 i_mchb-atflv = c_23.
 endif. " Condition for RATIO values
 else. " If characteristic does contain RATIO
 i_mchb-atflv = i_ausp-atflv.
 endif.
 i_output-atinn = cabn-atinn.
 i_output-atnam = cabn-atnam.
 i_output-atflv = i_ausp-atflv.
 i_mchb1-matnr = i_mchb-matnr.
 i_mchb1-werks = i_mchb-werks.
 i_mchb1-lgort = i_mchb-lgort.
 i_mchb1-charg = i_mchb-charg.
 i_mchb1-clabs = i_mchb-clabs.
 i_mchb1-atinn = i_ausp-atinn.
 i_mchb1-atflo = i_mchb-atflv.
 i_mchb1-atflv = i_ausp-atflv.
 append : i_output, i_mchb1.
 clear i_mchb1.
 modify i_mchb index l_tabix transporting atflo atflv .
 endif.
 endloop.
 endif.
 endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
 sort i_output by atinn werks matnr atflv.
else.
 g_exit = c_flag.
 message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
 l_tabix = sy-tabix.
At new Characteristic
 at new atinn.
 read table i_output1 index l_tabix.
 format color 1 intensified on.
 write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
 23(40) i_output1-atnam,
 125 sy-vline.
 format color off.
 format color 4 intensified on.
 write: /1 sy-vline, 2(20) 'Plant Name :'(022),
 23(4) i_output1-werks, 29(30) i_output1-name1,
 125 sy-vline.
 format color off.
 write /1(125) sy-uline.
 endat.
 clear: g_clabs, g_clabs1.
 format color col_normal.
 write :/1 sy-vline, 2(18) i_output1-matnr,
 20 sy-vline, 21(40) i_output1-maktx,
 61 sy-vline.
 if i_output1-atflv = c_c23.
 write: 62(22) c_g23 centered.
 else.
 shift i_output1-atflv left deleting leading space.
 write: 62(22) i_output1-atflv centered.
 endif.
 write: 84 sy-vline,
 103 sy-vline,
 110(5) i_output1-meins.
If the quantity value is negative
 if i_output1-clabs ge 0.
 write: 85(18) i_output1-clabs unit i_mchb-meins,
 125 sy-vline.
 else.
 i_output1-clabs = - i_output1-clabs.
 write i_output1-clabs unit i_mchb-meins to g_clabs1.
 condense g_clabs1.
 concatenate '(' g_clabs1 ')' into g_clabs separated by space.
 write: 85(18) g_clabs right-justified,
 125 sy-vline.
 endif.
 format color off.
 hide : i_output1.
 new-line.
At end of material
 at end of matnr.
 sum.
 move : i_output1-matnr to g_matnr.
 format color 3 intensified on.
 write /1(125) sy-uline.
 write :/1 sy-vline, 2(25) 'Total for Material :'(012),
 28(18) g_matnr.
 if i_output1-clabs ge 0.
 write: 85(18) i_output1-clabs unit i_mchb-meins,
 125 sy-vline.
 else.
 i_output1-clabs = - i_output1-clabs.
 write i_output1-clabs unit i_mchb-meins to g_clabs1.
 condense g_clabs1.
 concatenate '(' g_clabs1 ')' into g_clabs separated by space.
 write: 85(18) g_clabs right-justified,
 125 sy-vline.
 endif.
 write: 125 sy-vline.
 format color off.
 write /1(125) sy-uline.
 endat.
At end of plant
 at end of werks.
 sum.
 move : i_output1-werks to g_werks.
 format color 3 intensified off.
 write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
 28(4) g_werks.
 if i_output1-clabs ge 0.
 write: 85(18) i_output1-clabs unit i_mchb-meins,
 125 sy-vline.
 else.
 i_output1-clabs = - i_output1-clabs.
 write i_output1-clabs unit i_mchb-meins to g_clabs1.
 condense g_clabs1.
 concatenate '(' g_clabs1 ')' into g_clabs separated by space.
 write: 85(18) g_clabs right-justified,
 125 sy-vline.
 endif.
 format color off.
 write /1(125) sy-uline.
 endat.
At end of characteristic
 at end of atinn.
 read table i_output1 index l_tabix.
 sum.
 format color 3 intensified on.
 write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
 28(25) i_output1-atnam.
 if i_output1-clabs ge 0.
 write: 85(18) i_output1-clabs unit i_mchb-meins,
 125 sy-vline.
 else.
 i_output1-clabs = - i_output1-clabs.
 write i_output1-clabs unit i_mchb-meins to g_clabs1.
 condense g_clabs1.
 concatenate '(' g_clabs1 ')' into g_clabs separated by space.
 write: 85(18) g_clabs right-justified,
 125 sy-vline.
 endif.
 format color off.
 write /1(125) sy-uline.
 endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
 Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
 g_cursor = c_cursor2 or
 g_cursor = c_cursor3 or
 g_cursor = c_cursor4 or
 g_cursor = c_cursor5 or
 g_cursor = c_cursor6.
 format color 3.
 write: /1 sy-vline,
 2(17) 'Material Number :'(020),
 20(17) i_output1-matnr,
 94 sy-vline.
 format color off.
 write /1(94) sy-uline.
 loop at i_mchb1 where matnr = i_output1-matnr and
 atinn = i_output1-atinn and
 atflo = i_output1-atflv.
 format color col_normal.
 shift i_mchb1-charg left deleting leading '0'.
 write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
 18 sy-vline, 19(17) i_mchb1-charg centered,
 36 sy-vline.
 if i_output1-atnam cs c_ratio.
 write: 37(29) i_mchb1-atflv
 exponent 0 decimals 2 centered.
 else.
 write : 37(29) i_mchb1-atflv
 exponent 0 decimals 0 centered.
 endif.
 write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
 94 sy-vline.
 format color off.
 endloop.
 write /1(94) sy-uline.
else.
 message s899 with 'Invalid cursor position'(016).
 exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
 Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
 18 sy-vline, 19(17) 'Batch Number'(017) centered,
 36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
 66 sy-vline, 67(27) 'Quantity'(019) centered,
 94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
 Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
 clear g_atinn.
 i_output1-atinn = i_output-atinn.
 i_output1-atnam = i_output-atnam .
 i_output1-werks = i_output-werks.
 i_output1-name1 = i_output-name1.
 i_output1-matnr = i_output-matnr.
 i_output1-maktx = i_output-maktx.
 i_output1-clabs = i_output-clabs.
 i_output1-meins = i_output-meins.
 call function 'CONVERSION_EXIT_ATINN_OUTPUT'
 exporting
 input = i_output-atinn
 importing
 output = g_atinn.
 if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
 if i_output-atflv between c_13 and c_1499.
 i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
 elseif i_output-atflv between c_15 and c_1699.
 i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
 elseif i_output-atflv between c_17 and c_1899.
 i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
 elseif i_output-atflv between c_19 and c_2099.
 i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
 elseif i_output-atflv between c_21 and c_2299.
 i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
 elseif i_output-atflv >= c_23.
 i_output1-atflv = c_23.
 endif.
 write i_output1-atflv to i_output1-atflv .
 else.
 write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
 endif.
 collect i_output1.
 clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji

[E2010][EWS-XML][JAVA]How to get the properties of meeting rooms in Exchange 2010 using EWS Java API

When you look at meeting room properties in Outlook 2010, you can see 'City', 'Country/Region' and 'Department' information.
Is there any way to get this information using EWS Java API?

Hi Glen,
I am able to understand what u have said, but do not know how to implement it with meeting rooms....
If i am implementing
"Get all appointments between startDate and endDate in the specified folder, including recurring meeting occurrences" in ews-java-api, as you have mentioned above, i am able to get only my appointments from the start date to end date , as i
have given my email id and password, how to get my organization meeting room details, booked or not.
static ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2010_SP2);
public static void main(String[] args) throws Exception {
// TODO Auto-generated method stub
ExchangeCredentials credentials = new WebCredentials("[email protected]", "zzzz");
service.setCredentials(credentials);
try {
System.out.println("Check");
service.autodiscoverUrl("[email protected]",new RedirectionUrlCallback());
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
NameResolutionCollection nameResolutions = service.resolveName("SDB1",ResolveNameSearchLocation.DirectoryOnly, true);
System.out.println("nameResolutions==="+nameResolutions.getCount());
for(NameResolution nameResolution : nameResolutions)
System.out.println("NAME==="+nameResolution.getContact().getDisplayName());
The above code gives me the output like, the meeting room in my organization with word SDB1 are
Output:
nameResolutions===2
NAME===SDB1- TELCON - 1
NAME===SDB1-TELCON - 2
for. eg. I need to know today at what are the appointments in the room SDB1-TELCON2 and who all have booked the room.
I do not know how to implement for the meeting room can you please help me how to give it.
Thanks in advance.

How to get ATTENDEE, ORGANIZER, Respond Status on a Appointment?

Hi
I am using the Calendar SDK to view the appointments. When I use fetchEventsByRange or fetchEventsByID method, I am getting only few parameters like DTSTAMP, CATEGORIES, CLASS, PRIORITY, STATUS, DESCRIPTION, LOCATION, DTEND, SUMMARY, DTSTART, UID. How to get the ATTENDEE, ORGANIZER, Respond Status on the Appointment(Which is meeting actually). I tried to passing my own parameters list(ATTENDEE, ORGANIZER, RECURRENCE-ID etc) to the above mentioned methods. Though I can get RECURRENCE-ID through this procedure, still I cant get the ATTENDEE, ORGANIZER properties. Is there anything I am missing? Any help is appreciated.
Thanks in advance.
Hari

I fogured it out how to get these. I did not set up the email for the users on active directory. If I set up the email addresses for the users, then I am getting ATTENDEE, ORGANOZER properties.

How to get the Organization Units

Similar Messages

Maybe you are looking for