How to get the wireless router to work when i change to new modem and internet connection

I already set up my wireless router in my macbook but then moved to a new house and basically have a new internet connection. My internet connection is fine when i connect the ethernet cable form the modem to my macbook. But when i plugged in the wireless router, my computer sees it but will not connect to the internet. I lost my installation CD and i tried to re-install using the dowloaded installation but it goes into error saying i can't re-install if i don't change back to default.. anyway, maybe the solution is simple but it eludes me so please help!
In summary:
1. same macbook
2. same wireless router
3. same internet provider but new connection and modem (since i moved to a different house)
how do i get my wireless router to work? thanks!!!

Who is your Internet Service Provider(ISP)?
If you have a cable connection then follow this link and if you have a DSL connection then follow this link to configure your router.

Similar Messages

How to get the wireless mouse to work

my mouse isnt working

I also have a problem with Microsoft Wireless Mobile Mouse 3000. I lost the original dongle and bought a Bluetooth (TM) Usb dongle v2.0, which had only PC software disc included. I cannot locate any mac software or drivers for the dongle. Any suggestions on how to resolve connectivity? I

The browser Working very slowly at the first time open or when i open a new link And not as well as by And I have Operating system xp sp3 Updated

the browser Working very slowly at the first time open or when i open a new link
And not as well as by
And I have Operating system xp sp3 Updated
And i get Stop in the script

'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit)

-1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection

-1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection please help!!

You can download the product from this link:
<Download Photoshop Elements products | 13, 12, 11, 10>
Your redemption code/Serial number will work with these downloaded products.
Make sure you download the correct version for your operating system - Windows or Apple MAC
Good luck.

How to get the garbage collector to work?

Hi,
i have i program where i load an image scale it down and save the scaled version in an array. I do this for a whole directory of images.
After every image i set the temporary variable for the loaded image = null and call the function System.gc().
My problem is, that the garbage collector does�nt give the memory of the loaded image free and the used memory of my program grows with every loaded image.
/* Reads all images from a folder an stores them in an Array of images */
     public static BufferedImage[] readScaledImagesFromFolder(String folder,
               int maxSize) {
          File dir = new File(folder);     /* Open the Folder */
          String[] children = dir.list();          /* Get the children of the folder */
          if (children == null) {
             // Either dir does not exist or is not a directory
              System.out.println("No images in the folder!");
              return null;
         } else {
              /* Init array for images */
              BufferedImage[] images = new BufferedImage[children.length];
              int i = 0;
              int index = 0;
              BufferedImage temp;
              String filename, fileending;
             for (i=0; i<children.length; i++) {
                  // Get filename of file or directory
                 filename = children;
     /* Get the fileending of the file */
     fileending = filename.toLowerCase().substring(filename.length()-4);
     if(fileending.equals(".jpg") || fileending.equals(".bmp")
               || fileending.equals(".png") || fileending.equals(".gif"))
          /* Read the image */
          temp = util.ImageUtils.loadBufferedImage(folder+"/"+filename);
          /* Scale the image down and save it in an array */
          images[index] = Util.getScaledImage(temp,maxSize);
          index++;
     temp = null;
     System.gc();
     Mosaic.sourceImageNum = index;
     System.out.println((index+1)+" resized pictures loaded from folder: "+folder);
     return images;
How can i get the gargabe collector to work after every iteration?
I tried to let the Thread.sleep(10) after System.gc() but it does�nt help.
Thank you every much
JackNeil

Hm yes.. i now that System.gc() is only a
suggestion.
But i know what my program is doing and that it
does�nt need the temporary image anymore after i have
a scaled down version. And the temporay image will become unreachable as soon as reading the next one overwrites your temp variable. Setting the variable to null doesn't have much effect.
It would be smarter to load the new image over the
old temporary image and not to expand the heapsize to
maximum.Then look at the possibitly of loading the next image into the same bufferedimage.

How to get EDUP wireless usb adapter working under linux

i have a EDUP wifi adapter, that i would like to use with arch.
the box states that linux is supported. but i dont know how to get the drivers to work.
here is the out put of lsusb.
[mark@blackeee ~]$ lsusb
Bus 001 Device 004: ID 0ace:1215 ZyDAS WLA-54L WiFi
thanks for any pointers .

i have a EDUP wifi adapter, that i would like to use with arch.
the box states that linux is supported. but i dont know how to get the drivers to work.
here is the out put of lsusb.
[mark@blackeee ~]$ lsusb
Bus 001 Device 004: ID 0ace:1215 ZyDAS WLA-54L WiFi
thanks for any pointers .

How to get the Wiki search functionality working?

hi,
Another Wiki question regarding the 7.1u1 Portal wiki functionality: What is necessary to get the wiki search functionality working? Right now when using the wiki search page all it does is return to the search form, no errors but no hits either. I guess some additional administrative work is needed to get search working?
thanks, tom

haven't touched anything except for the wiki template jsps to change the design. it is a linux rh4 install. there are no communities on that server (yet), just the wiki portlet in a tab so far. is the wiki search dependent on the portal search server or totally separate (ie self contained wiki search)? any additional services or such that need to be started for it to work?

I cant get my wireless router to work

Hi i just bought a new wireless g broadband router which i am trying to use for cable but when i am goin through the setup cd and everything is connect its say that its not connecting to the internet.
Router was unable to connect to the internet. Please turn off/on modem to try and fix problem
Help anybody?

ok, so you cannot configure the router because it prompts you that you dont have active internet connection right? try first to connect directly your pc to the modem and check if your online.. so if your online, connect again the pc to the #1port of the router and connect the modem to Internet port of the router... then try this one, launch internet browser then type on address bar 192.168.1.1 then leave username blank and type admin on password then press OK. if your on the set up page of the router, go to status and check if you have an IP address... it means that you already have internet connection with the router..

How to get the last received notification timestamp when app in background

Hi All,
We are developing the app in windows phone Silverlight 8.1.
We need to show the last received notification time stamp even when the app is in background.
When the app in foreground, I can get the timestamp.
Since we cant write the background task for the Silverlight phone 8.1 app, I don't know how to get the time stamp of the last
notification(toast/livetile/badge) in the app for display.
Can anyone help on this.
Thanks,
Meena

Yes, continuous background execution is not supported but you can use background tasks.
(Continuous background execution in this context refers to the special run state permitted for GPS Navigation apps.)
For information regarding Background Tasks see: Supporting your app with background tasks -
http://msdn.microsoft.com/library/windows/apps/hh977046.aspx
Additional information is available in these topics:
Guidelines for background tasks
PushNotificationTrigger
How to receive raw notifications
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

Getting your wireless router to work with the mini computers and their small monitors

I have one on the new Dell Mini computers. I purchased the Wireless-G Broadband Router model #WRT54G2 and had the most difficult time getting Network Magic installed on the Mini because the monitor was too small for the required resolution (1024x768) - this was trying to install via the CD that came with the router.
The solution to this problem:
1) Use the CD to install the Router and Network Magic on your desktop (or wherever you are hardwired to the internet).
2) Open Network Magic; go to "Status" and download the newest version of Network Magic to your desktop.
3) DO NOT use the CD to install Network Magic on the Mini. Instead - Unplug your hardwire connection from your desktop and connect it to your Mini. Go to "linksysbycisco.com/us/en/support/WRT54G2/download" and install the newest version of Network Magic on your Mini.
4) Replug your hardwire connection into your desktop.
5) You can now use Network Magic from your desktop to add the mini to the network. Go to "Tasks" and then "Add a device." You will be able to follow the directions at this point.
The only other issue I found was naming the network. I had to name the desktop and the mini the same name otherwise it wouldn't connect.
Good Luck and hopefully it won't take you the three days it took me to figure this out.

Hi i have a Router WRT 54 G2 v1, when i want to connect it wireless to my new mini, He is asking me to enter a Security key !
i don't know how to get that Code, anyone would have an answer for me ?
Thank you

How to get the FTP clients to work?

This is something that (to me at least) should be trivial but I just can't
get it to work at all.
How do you get an FTP client to work?
I've tried several GUI clients as well as the terminal FTP command and they
all seem to get stuck entering passive mode - according to the log entries
they send the command.... And then nothing or a timeout, the following is
from the terminal FTP command:
Titania:~ susan$ ftp ftp.apple.com
Trying 17.254.16.11...
Connected to ftp.apple.com.
220 17.254.16.11 FTP server ready
Name (ftp.apple.com:susan): anonymous
331 Anonymous login ok, send your complete email address as your password.
Password:
230 Anonymous access granted, restrictions apply.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
501 EPSV: Operation not permitted
227 Entering Passive Mode (17,254,16,11,223,157).
200 PORT command successful
421 Service not available, remote server timed out. Connection closed
ftp>
In my System Preferences -> Network panel in the Proxies tab, I have the
"use Passive FTP mode (PASV) checked.
I also have checked the FTP firewall option (but I think that is only if I'm
acting as an FTP server).
I am connected to the internet via a Netgear wireless router.
I also have an old Windows laptop that also uses the same wireless router
and it can FTP quite happily!!!!!
Any suggestions would be gratefully received.
Susan

ejn - thanks for your continued assistance.
I've tried turning the firewall off but this does not appear to make any difference(*). Also, I have Parallels installed and I'm sharing the internet connection with this (even though Parallels itself is not currently running). Turning this sharing off doesn't seem to change anything either.
I have noticed some entries in the ifpw.log file that coincide with some of the ftp actions. Given the following terminal session:
Titania:~ susan$ ftp ftp.apple.com
Trying 17.254.16.10...
Connected to ftp.apple.com.
220 17.254.16.10 FTP server ready
Name (ftp.apple.com:susan): anonymous
331 Anonymous login ok, send your complete email address as your password.
Password:
230 Anonymous access granted, restrictions apply.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
501 EPSV: Operation not permitted
227 Entering Passive Mode (17,254,16,10,245,46).
200 PORT command successful
421 Service not available, remote server timed out. Connection closed
ftp>
at the time the "200 PORT command successful" is displayed, the ifpw log starts showing:
Sep 5 09:11:21 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:24 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:27 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:30 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:33 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:36 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:42 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
which makes sense as the system tries to go for an active transfer.
(*) Actually, while I've been writing this, I've been playing on the terminal as well. I've found the combination of:
1) turning off the firewall
2) starting ftp
3) issuing the 'passive' command to turn off passive mode
4) issuing 'ls' etc. works
Looks like I've not been waiting long enough for the ftp client to get sick of trying the passive transfer and switching to an active one with the firewakk turned off!
Still doesn't answer the question - why does passive mode not work?
Susan

How can I get the number pad to work (input characters) on my new plugin Mac full keyboard when connecrted to my mackbook?

The number pad on by Mac USB keyboard does not work (no input). I have updated the Mac keyboard drivers and that did fix the problem. How can I get this keyboard to work when connected to my Powerbook?

Do you have "Mouse Keys turned on in System Preferences / Universal Access ?
Mouse Keys Turn on to use the keyboard instead of the mouse to control your computer

How do I get the mouseover menus to work when viewing QVC's website?

With IE9 on QVC's website, hovering over a department heading like Kitchen & Food, or Electronics brings a drop down menu with all the subheadings for that department. Why doesn't this work with Firefox 4 & 5. Can such an ability be turned on? If so, how?

I need step by step instructions on how to get my virtual lab cd to work. The technician said cd not compatible or is corrupt. I do not believe their is nothing that can be done. When I put the cd in the side slot nothing comes up on the screen. I have tried several ways, the technician did not seem very knowledgeable on what to do. Also this cd plays fine on my other computer which is not an apple computer. Is there anything I can do to correct this?

Help! How to get the Java Communication Package work in JDK1.3.1?

I downloaded a Java Communications API Win32 ver 2.0 from java.sun.com, and try to use it to do some programming to communication ports with JDK1.3.1.
I failed. When I tested with the samples (BlackBox, SimpleRead) coming with the javax.comm. It showed "no serial port found", something like that. I check the installation Instructions of the comm. package, it only described the installation under JDK1.1 and the pre-release version of JDK1.2. (and the installation of the same package in JDK1.1 and JDK1.2 are totally different.)I tried the specification with my JDK1.3, but it doesn't work.
Who knows how to install the Javax.comm package in JDK1.3.1? Please let me know as soon as possible. Thanks a lot.

This comes straight out of the FAQ that you got with your download:
Q: My application does not find any ports when it enumerates available ports.
Q: BlackBox gives me a message that says "No serial ports found!"
A: In order for the Java communications API to find ports the file
javax.comm.properties must be in the correct place. The preferred location
is in <jdk>/lib. See the installation instructions for alternate locations
and further information.
Installation is very simple. Comm is a standard extension, so copy comm.jar to %JAVA_HOME%\jre\lib\ext
This is all in the docs....

How to get the wireless router to work when i change to new modem and internet connection

Similar Messages

Maybe you are looking for