How to get these Attribute class in Query Statement ?

Hi All,
I have 2 SCCM primary site, the first one is a migrated site from SCCM 2007 to SCCM 2012 SP1 & then upgraded to SCCM 2012 R2, the second one is a newly created SCCM 2012 R2 site.
I was trying to create a collection membership rule using the query statement on the second site & i found there are attribute classes which were missing on this site.
Under query rule /edit query rule in the criteria tab i am trying to define a new criteria with Criteria type : Simple value & then i click the select under "Where" for chossing the attribute class & a value called "Winlogon64"
don't exists there. There are other classes which are missing too.
then i go to my first site & i can see the classes there, collection query rule are also defined using the attribute classes.
Now my questions are :-
1. Does these settings gets migrated from SCCM 2007 to SCCM 2012 on the first site?
2. How can we get this in SCCM 2012 R2 on the second site?
Experts please help.
Thanks,
Pranay.

It sounds a lot like you where using an extension on your hardware inventory. Changes to your hardware inventory are not migrated, so you would need to recreate that change in the hardware inventory.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

How to Get Navigational attributes of dso in Report ...

Hi i have a dso with many fields ,
In the report i need to get some navgational attributes which are in dso..
How to Get Navigational attributes of dso in Report ..??
Thanks All..

hai naiduz,
in the dso u find folder with navigational attributes, there select the Navigation check box the fields which u need in the report.
and further if ur dso through multiprovider and also identify them at multi provider level.
then u will be able to see the fields at query designer level, then u can use the nav. fields u need in the report.
regards,
Vj

How to get the attribute values out?

Hi everyone,
<root>
<category name="Mens Clothing" id="0">
<subcategory>Active/Baselayer Tops</subcategory>
<subcategory>Active/Baselayer
Bottoms</subcategory>
</category>
<category name="Womens Clothing" id="1">
<subcategory>aaa</subcategory>
<subcategory>bbb</subcategory>
</category>
</root>
How to get the attribute values out? For example "Mens
Clothing" and "Womens Clothing".
// the line below returns "Active/Baselayer Tops" and
"Active/Baselayer Bottoms"
var myXml:XML = new XML(event.result);
Thanks,
May

Here is attribute identifier operator from FB Help:
@ attribute identifier Operator
Usage myXML.@attributeName
Identifies attributes of an XML or XMLList object. For
example, myXML.@id identifies attributes named id for the myXML XML
object. You can also use the following syntax to access attributes:
myXML.attribute("id"), myXML["@id"], and myXML.@["id"]. The syntax
myXML.@id is recommended. To return an XMLList object of all
attribute names, use @*. To return an attribute with a name that
matches an ActionScript reserved word, use the attribute() method
instead of the @ operator.
Operands attributeName:* — The name of the attribute.
Example
How to use examples
The first example shows how to use the @ (at sign) operator
to identify an attribute of an element:
var myXML:XML =
<item id = "42">
<catalogName>Presta tube</catalogName>
<price>3.99</price>
</item>;
trace(myXML.@id); // 42The next example returns all attribute
names:
var xml:XML =<example id='123' color='blue'/>
var xml2:XMLList = xml.@*;
trace(xml2 is XMLList); // true
trace(xml2.length()); // 2
for (var i:int = 0; i < xml2.length(); i++)
trace(typeof(xml2
)); // xml
trace(xml2.nodeKind()); // attribute
trace(xml2
.name()); // id and color
} The next example returns an attribute with a name that
matches a reserved word in ActionScript. You cannot use the syntax
xml.@class (since class is a reserved word in ActionScript). You
need to use the syntax xml.attribute("class"):
var xml:XML = <example class='123'/>
trace(xml.attribute("class"));

How to get zclass attribute's value inside "Execute_default" method

Hi all,
I am displaying a link in UD step under "Objects & Attachmnents".I am using zclass. I created a attribute in zclass and i am creating a instance (background task) before this UD step and i will be setting a attribute of the zclass inside this create instance method.
My problem is, if i click the link, this method "BI_OBJECT~EXECUTE_DEFAULT_METHOD" is getting executed but i am not able to get the attribute value inside this method, eventhough i am setting the attribute value before the UD step.
Pls let me know, how to get the attribute's value inside "Execute_default" method, as i need to process further using this attribute.
P.S: I tried with both static & instance attribute. I can achieve the same using ZBO but my client needs to use only class.
-Vinoth
Edited by: S Vinoth on Jan 29, 2010 7:23 AM

Lei,
If you are concerned only about a couple of attributes, then you can manage with a separate copy of the data. But if the data is in bulk, better leave it to pl/sql side of validation.
--Shiv

My Apple TV was set up with a different Apple ID than I have for my ITunes Account. In other words I have multiple Apple ID's. How can get these accounts to sync up?

My Apple TV was set up with a different Apple ID than I have for my ITunes Account. In other words I have multiple Apple ID's. How can get these accounts to sync up?

If you wish to use home sharing then you need to setup the Apple TV under your ID.

How to get the object class field value in CDHDR table for vendor

hi
how to get the object class field value in CDHDR table for vendor

Try KRED/KRED_N as object class in CDHDR for Vendor.

My library has went from thousands of songs to 60 and i dont know why, any suggestions how to get these back?

My library has went from thousands of songs to 60 and i dont know why, any suggestions how to get these back?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

How to get the attribute value of an XML file??

How to get the attribute value of an XML file??
For example, how to get name and age attributes?
<student name="Joe" age="20" />

What are you using to read the XML file??
On the assumption of JDOM - www.jdom.org. Something along the lines of:SAXBuilder builder = new SAXBuilder(true);
Document doc = builder.build(filename);
Element root = doc.getRootElement();
List children = root.getChildren();
Element thisElement = (Element)children.get(n);
String name = thisElement.getAttributeValue("name")
try
int age = Integer.parseInt(thisElement.getAttributeValue("age"));
catch (Exception ex)
throw new InvalidElementException("Expected an int.....");
}Ben

How to get these values?

This sample output of trcsess shows the consolidation of traces for a particular
session. In the following example the session index and serial number equals 21.2371.
trcsess session=21.2371My question is: what are session index and serial number here? How to get these values?

As per the tuning doc:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/sqltrace.htm#i20110
You get these values from the V$SESSION view.
Session Index = SID
Serial number = SERIAL#

TS1702 When I try to update two certain apps in the App Store, I get a message that says 'cannot connect to iTunes store'. Any idea how to get these apps to update?

When I try to update two certain apps in the App Store, I get a message that says 'cannot connect to iTunes store'. Any idea how to get these apps to update?

Check that the apps are still available in the store

How to get SDKODBC Wrapper class for indesign cs3

Hi,
I have to implement the mysql database with my indesign plugin. I didn't have a SDKODBC Wrapper class. Can any one say how to get SDKODBC Wrapper class from adobe.
Regards,
saravanan.

I doubt if change documents are generated for SE78 transaction.
For list of change documents defined, please check table: TCDOB.
Hope this helps.
Kind Regards
Eswar

How to get this output using sql query?

Hi,
How to get this output using sql query?
Sno Name Age ADD Result
1 Anil 23 delhi Pass
2 Shruti 25 bangalor Pass
3 Arun 21 delhi fail
4 Sonu 23 pune Pass
5 Roji 26 hydrabad fail
6 Anil 28 delhi pass
Output
Sno Name Age ADD Result
1 Anil 23 delhi pass
28 delhi pass

Hi Vamshi,
Your query is not pretty clear.
write the select query using Name = 'ANIL' in where condition and display the ouput using Control-break statements.
Regards,
Kannan

I'm really disappointed with new 5 update. No music, No photos, No videos, lost all emails. Anyone know how to get these all back? Yes, I have synced and synced and synced. Help

I'm really disappointed with new 5 update. No music, No photos, No videos, lost all emails. Anyone know how to get these all back? Yes, I have synced and synced and synced. Help

Hopefully it isn't too late for this but: before performing an update it is really best if you close all apps (double click the home button, click and hold on one of the apps that appears at the bottom of the phone until the red minus sign appears and then tap the minus sign until all apps are closed) and then turn the phone off by holding the standby button until the slider saying "slide to power off" appears and slide it to turn the phone off. Then turn the phone back on and hook it up to your computer to sync and perform the upgrade. This also helps if you do this before performing syncs too. I had problems with an iPod previously where it would fail to backup before sync most times, but have never had a problem with updates or syncs since I started performing this procedure. Unfortunately, your pre-update backup may have failed and the data in your apps might be gone, but you could try to restore your phone. If I remember correctly how to do this, you connect it to your computer and check for updates. It should say you're up to date, but have an option to restore the phone. If it does, I'd try that. It may also have a "restore from backup" option you could try.

How to get the attribute...?

well im trying to create JTable from a vector which will contain random Objects from random classes haveing random number of attributes for example:
class x{
int id;
String name;
String surname;
class y {
String title;
String author;
etc.
like i said i have a vector of such objects and wanna make a JTable from it... i tried to make it like this:
JTable table = new JTable(vector a, vector b)
but i get nullpointer exception because (i supose) vector b had objects of class x and it cant be converted somehow to JTable rows...
so im trying to make an array[][] which should contais all objects with all attributes of one of those classes
well i dont know if u will understand what im talking about cause my english sux...
anyway the problem is that:
lets say i have a vector containing:
new x(1,"a","b")
new x(2,"x","y")
etc
lets say my vector is v
how to get gor example any string from first object?
i had something like this:
v.get(i).getClass().getFields()[k]
where:
- i is the i element in vector
- k is the attrribute which i wanna get
i tried many combinations (after i get Field) but all i get was something like:
java.lang.reflect.Field
or
java.lang.String
and i want to get for example "a" not a type:/
plz helkp me if u can or tell me how to do something like this in other way:/
thx alot for all answers...

well it is not a Swing problem...
maybe u dont understand the problem...
lets say i have a class
Person{
int id;
String name;
String surname;
and the array in main:
Person[] people;
lets say that there is 100 people...
and i wanna to outprint first person surname BUT without useing Person class methods...
so i should do something like
System.out.pintln(""+
Person[1].getClass().... <--> and what next?
in other words how to get and outprint a String attribute from java.lang.Class

How to get instance of Class with its type parameters

Hi,
Have any of you folks been dealing with generics long enough to show me how this should be written? Or point me to the answer (I have searched as well as I could).
I boiled down my situation to the included sample code, which is long only because of the inserted comments. And while boiling I accidentally came across a surprise solution (a bug?), but would obviously prefer a smoother solution.
My Questions (referred to in the code comments):
#1. Is there a way to get my parameterized type (classarg) without resorting to using the bogus (proto) object?
#2. Can anyone understand why the "C" and "D" attempts are different? (All I did was use an intermediate variable????) Is this a bug?
Thanks so much for any input.
/Mel
class GenericWeird
   /* a generic class -- just an example */
   static class CompoundObject<T1,T2>
      CompoundObject(T1 primaryObject, T2 secondaryObject)
   /* another generic class -- its main point is that its constr requires its type class */
   static class TypedThing<ValueType>
      TypedThing(Class<ValueType> valuetypeclass)
   // here I just try to create a couple of TypedThings
   public static void main(String[] args)
      // take it for granted that I need to instantiate these two objects:
      TypedThing<String>                        stringTypedThing = null;
      TypedThing<CompoundObject<String,String>> stringstringTypedThing = null;
      // To instantiate stringTypedThing is easy...
      stringTypedThing = new TypedThing<String>(String.class);
      // ...but to instantiate stringstringTypedThing is more difficult to call the constructor
      Class<CompoundObject<String,String>> classarg = null;
      // classarg has got to be declared to this type
      //    otherwise there will rightfully be compiler error about the constructor call below
      // This method body illustrates my questions
      classarg = exploringHowToGetTheArg();
      // the constructor call
      stringstringTypedThing = new TypedThing<CompoundObject<String,String>>(classarg);
   } // end main method
   // try compiling this method with only one of A,B,C,D sections uncommented at a time
   private static Class<CompoundObject<String,String>> exploringHowToGetTheArg()
      Class<CompoundObject<String,String>> classarg = null;
      /* Exhibit A: */
////     classarg = CompoundObject.class;
         results in compiler error "incompatible types"
         found   : java.lang.Class<GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = CompoundObject.class;
                                        ^
         I understand this. But how to get the type information?
      /* It's obnoxious, but it looks like I will have to construct a temporary
          prototype instance of type
             CompoundObject<String,String>
          in order to get an instance of
             Class<CompoundObject<String,String>>
          (see my Question #1) */
      CompoundObject<String,String> proto = new CompoundObject<String,String>("foo", "fum");
      /* Exhibit B: */
////     classarg = proto.getClass();
         results in compiler error: "incompatible types"
         found   : java.lang.Class<capture of ? extends GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = proto.getClass();
                                        ^
      /* Exhibit C: */
////     classarg = proto.getClass().asSubclass(proto.getClass());
         results in compiler error: "incompatible types"
         found   : java.lang.Class<capture of ? extends capture of ? extends GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = proto.getClass().asSubclass(proto.getClass());
                                                     ^
      /* Exhibit D: (notice the similarity to C!): */
////     Class tmp1 = proto.getClass();
////     classarg = tmp1.asSubclass(tmp1);
      /* It compiles (see my Question #2) */
      return classarg;
   } // end method exploringHowToGetTheArg()
} // end class GenericWeird

Thanks so much, Bruce. (Oh my goodness, how would I have ever come up with that on my own?)
So in summary
This doesn't compile:
      classarg = (Class<CompoundObject<String,String>>)CompoundObject.class;but these do compile:
      classarg = (Class<CompoundObject<String,String>>)(Class)CompoundObject.class;or
      Class coclass = (Class)CompoundObject.class;
      classarg = (Class<CompoundObject<String,String>>)coclass;And this doesn't compile:
       classarg = proto.getClass().asSubclass(proto.getClass());but this does:
       Class tmp1 = proto.getClass();
       classarg = tmp1.asSubclass(tmp1);

How to get these Attribute class in Query Statement ?

Similar Messages

Maybe you are looking for