How to get two syslog resources with different filter levels into ASA

Hi All,
I have my ASA's set up to push logs to my syslog server:
logging host inside 198.xxx.xxx.185
logging trap notification
However, I would like to also trap if a VPN on my ASA's go down, but I want to send that to my SNMP server, NOT my syslog server. I also want to only trap that VPN log message and nothing else, so I want to set the filter level to emergencies:
logging host inside 198.xxx.xxx.16
logging trap emergencies (+ system message 123456)
How can I configure my ASA so that these two syslog destinations will have separate respective filter levels of notifications for .185 and emergencies for .16?
Also, does anyone know the System Log Message ID for a VPN tunnel going down?

Dear Ronny,
i am gining the solution below.But would request you to change your ITAB STRUCTURE LIKE THIS BEFORE USING THE CODE
VERME LGPLA
252.000 EA 300 0149A 0149 410
276.000 EA 300 0149A 0107 410
516.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
then do as follows.
SORT ITAB BY LGPLA VERME.
LOOP AT ITAB INTO WITAB.
W_INDEX = SY-TABIX.
here take all the abOve fields in temp fieds.
LW_VERME = WITAB-VERME..AND SO ON.
AT END OF LGPLA.
   MOVE: all LW fields to work area of ITAB1
   APPEND work area of ITAB1 TO ITAB1.
   DELETE ITAB INDEX W_INDEX
ENDAT.
ENDLOOP.
Basically what u r doing here is thet u r using processing event.
So whenerv VERME changes this event will be triggered.
Just try this out...something like this only will be he logic.
Please let me know further

Similar Messages

HT1491 I have two itunes accounts with different Apple ID's. How can I merge them into one?

I ahve two itunes accounts with different Apple ID's. How can I merge them into one account?

Apple has no provisions for this. You cannot merge multiple Apple ID's into one ID. Content is always tied to the Apple ID that was used to purchase it.

How to do consolidation using two chart accounts with different currencies

Hi
How to do consolidation using two chart accounts with different currencies and do we need to use same fiscal year variant ?
What would be the impossible factors when we use two company codes with two chart of accounts ...
Regards
Kesharika

Good Afternoon
You need to use translationa and/or valuation
translation takes account in foreign currency and translates to group currency
valuation takes account in currency 1 and restates into currency 2 for a company with currency 2
so depends on which company you are consolidating for, a company in a foreign currency in that currency or consolidating a compnay in foreign currency to parent company in another currency

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

Joining two fact tables with different dimensions into single logical table

Hi Gurus,
I try to accomplish in Oracle Business Intelligence 11.1.1.3.0:
F1 (D1, D2 and D3)
F2 (D1 and D2 and D4)
And we want to build a report F1 F2 D1 D2 D3 D4 to have data for:
F1 that match only for D1-D2-D3
and data for
F2 that match only D1-D2-D4
all that in one row, so D3 and D4 are not common dimensions.
I can only do:
F3 (D1, D2)
F4 (D1, D2 and D4)
And report
F3 F4 D1,D2,D4 (all that in one row, and only D4 is not a common dimension)
Here is the very good example how to accomplish the scenario 1
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
But looks like it does not work in 11.1.1.3.0
I get
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 14025] No fact table exists at the requested level of detail: [,,Clients,,Day,ROI,,,,EW_Names,,,,,,,,,,,,,,,,,]. (HY000)
I am sure I set up everything correctly as advised in the blog but it works with only one not a common dimension
Is it a bug in 11.1.1.3.0 or something?
Thanks,
Kate

Thanks for all your replies.
Actually, I've tried the solutions you guys mentioned. Generally speaking, the result should be displayed. However, my scenario is a little bit tricky.
table Y's figures are not the aggregation of table X for D dimension. Instead, table Y's figures include not only D dimension total, but also others (others do not mean A, B, C dimension). For example, table Y stores all food's figure, while table X stores only drink's figure. D dimension is only about drink's detail. In my scenario, other foods' figure is not provided.
So, even if I set D dimension to all/total for table X, table X's result is still not the same as table Y.
Indeed, table Y does not have a column key to join to D dimension's key. So, if I select D dimension and table Y's measures at the same time in BI Answer, result returns no data. Hence, I can't compare table X and table Y's results with selection of D dimension.
Is there any solution to solve this problem?
Edited by: TomChan on Jun 3, 2009 9:36 AM

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

WPC: unable to add different resources with the same name into a WPC page

Hi,
I got a WPC problem when adding different KM resources with the same name into a WPC page. Only one KM resource is able to be added in WPC.
For example:
There two "article.html" with different content and RID:
1. /company_a/article.html
2. /company_b/article.html
when adding these two html pages into a WPC page, only one page will be shown.
This means that a WPC page is not able to contain resources with same file names. I think the problem might lie on the resource-linking mechanism of WPC. WPC will add a resource link in the page folder, when a new resource is drag&dropped into WPC.
Anyone has some good ideas to solve my problem? Thanks a lot.
Regards
Lei NING
Edited by: Lei NING on Apr 15, 2008 4:16 PM

As this is not possible and double entries cause this problem, why not just pu both napes in the contact details on the same number. IE John Smith & Peter Jones all in the first name, by doing this if you search your contacts either by searching for john, peter, smith or jones the number will show up and if either calls the number will show John Smith & Peter Jones, it may not be perfect but will work. As the phone only recognises a number if two seperate entries of the number exist with different names it cannot possibly know who is calling ?
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

How to get two parameters in the same line of selection screen?

hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?

hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1.

How to merge two search button from different criteria

How to merge two search button from different criteria
this image show the question
http://s24.postimg.org/4algthuj9/1111.jpg
two different criteria for the same view and I need to merge it in one button as when I click
on the button search result give from two criteria parameters

You can!t using af:query. the af:query component comes as is. If you can't do it through the properties, you probably can't do it at all.
As in your other thread, the way to go is to program your own search form. This way you can use a layout and functionality you like.
For this you create a form with input fields for the values you are searching for, put them on hte page in a way you like and in the end by hitting on a button (e.g. called Search) map all inputfields to parameters of a service method you defined in your application module or VO. This service method then executes a view criteria returning all matches in the default iterator (just as if you had used af:query.
Timo

How to get mobile model name for different types mobile devices

Hi,
I have checked few thread in this forum about getting mobile model name at server. So far, i noticed the mobile name is set manually in the midlet as user-agent .
HttpConnection connection = null; connection = (HttpConnection)Connector.open(url); connection.setRequestMethod(HttpConnection.POST); connection.setRequestProperty("User-Agent","Nokia7110 Profile/MIDP-1.0 Configuration/CLDC-1.0");
i retrieve the header information from servlet like below :-
String userAgent = request.getHeader("User-Agent");
How to get mobile model name for different model devices , not by manually adding the model name in midlet?
Thanks in advance :-)

Hi,
In J2ME there is no method to get the model number from the device. how ever you can use the APIs provided by the device manufacturer if available. But still the APIs will not work with devices from other manufacturer or sometimes it will not work with the devices of the same manufacturer if the API is not supported. so it is better to send the device model name through the header.

How do I batch resize images with different aspect ratios?

How do I batch resize images with different aspect ratios?

poa66 wrote:
Landscape: I want result to be 1960 x 1103 px and 72 ppi whether the original is 300 ppi or 220 ppi and wether it is 2Mb or 10 Mb. Cropped centered top and bottom.
There will be a set of Landscapes that that have a narrower aspect ratio the 1960:1103 that would also need the top and bottom cropped like all Portraits would could be. You need to realize that center cropping Landscape image that have aspect ratios near 1960:1103 will usually produce acceptable compositions. However Cropping wide panoramas and portraits will only produce acceptable landscape 1960:1103 composition occasionally.
Here you will see what happens when image have aspect ratio the do not fit the desired aspect ratio. Where Landscape are forced to portrait and portrait forced to Landscape. Here are two Collage I populated with a mixture of image with different aspect ratios. One collage has all 3:2 Landscape places and the other 2:3 Portrait places.
I create a 1 image 1960x1103 collage 72dpi and create those too. Note the landscape boy foot is cropped off 3:2 is narrow compared to 1960:1103

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

Merge of two same items with different Qty in po

Hi Experts,
Is it possible to merge two Same items with different Quantity into 1.
For Eg:- 2 similar items with qty 2 & 3 must show 5 qty appearing once.Is it possible through Transnotification what should be the query.
Mona

Hi Mona,
If you want to display a Purchase Order on screen summarized by item, set the "Summary Type" to "By Item" (by default it is "No Summary"). The PO lines will then be summarized by item with total quantity for each item.
If you want to display it on the printout then you need to modify the PLD. It is quite easy actually. You can use the Repetitive Area Footer to display the summary of each item and set all fields in the Repetitive Area to be not visible and set the height to minimum height.
Cheers,
Marini

How to get gui_download and gui_upload with popup filename?

how to get gui_download and gui_upload with popup filename?

Here is a short example.
report zrich_0003 .
data: ifiletab type filetable.
data: xfiletab like line of ifiletab.
data: xstring type string.
data: rc type i.
data: itab type table of string.
data: xtab type string.
start-of-selection.
call method cl_gui_frontend_services=>file_open_dialog
    changing
      file_table              = ifiletab
      rc                      = rc.
read table ifiletab into xfiletab index 1.
xstring = xfiletab-filename.
check not xstring is initial.
call method cl_gui_frontend_services=>gui_upload
    exporting
      filename                = xstring
changing
    data_tab                = itab.
loop at itab into xtab.
    write:/ xtab.
endloop.
Regards,
Rich Heilman

How to get the contents associated with a component.

How to get the contents associated with a component.
Like i have 2 buttons and i want to get the contents associated with these button without clicking them i.e without firing the event.
By Contents i mean, whatever things we get after firing the event,we get some other window and some thing is added to the current page and so on.

grab all the code inside the actionPerformed(ActionEvent e) method

How to get two syslog resources with different filter levels into ASA

Similar Messages

Maybe you are looking for