How to get vertical scrolling in the table

Hi Experts,
Appreciate your help. I have created table in the screen but couldnt get the vertical scrolling option. It was able to get the horizontal scrolling but not vertical. Can you please guide me how to get it.
Thanks

Hi,
Vertical scroll bar will come automatically if more entries are maintained in the table.
Hope this helps,
Reward points if helpful,
Thank You,

Similar Messages

Issue while vertical scrolling in the table control

Hi,
i have my table control which can show 14 entries at a time. and i have almost 100 entries in table control.
now if i selected 2 entries in the visible part.
now scroll vertically.
again come back to see the selected records now they are unselected.
please respond soon.
Thanks
Malya

Hi,
I have redone the scenario and follow the steps it will work....
STEP 1: Create an internal table with field for selection in table.
STEP 2: Assign the selection field in the table control for the line selection.
STEP 3: Now whenever the line is selected, the selection field will have a field 'X'.
STEP 4: In PAI Modify the table fields those are selected with 'X'.
STEP 5: Set a flag in PAI, flag = 'X'.
STEP 6: In PBO set a condition .         " We set a flag so that we fetch the data only once.
If flag NE 'X'.
Fetch data.
endif.
Data:
      begin of ztable,
         ID type char4,
         Name type char30,
         Sel type c,
      end of ztable.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB INTO FS WITH CONTROL EMP CURSOR W_I.
    MODULE UPDATE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB.
MODULE APPEND.
ENDLOOP.
MODULE USER_COMMAND_0100.
INCLUDE YMODTOP                                 .    " global Data
*&      Module UPDATE OUTPUT
*       text
MODULE UPDATE OUTPUT.
MOVE FS TO FS.
ENDMODULE.                 " UPDATE OUTPUT
*&      Module STATUS_0100 OUTPUT
*       text
MODULE STATUS_0100 OUTPUT.
IF FL_FLAG <> 1.
    SELECT * FROM ZTABLE INTO CORRESPONDING FIELDS OF TABLE ITAB.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module append INPUT
*       text
MODULE APPEND INPUT.
MODIFY ITAB INDEX SY-STEPL FROM FS TRANSPORTING SEL .
FL_FLAG = 1.
ENDMODULE.
Thanks&Regards
Sarves

How to get vertical scroll bars for a window?

hi All,
i have a window in my smart form ( not main window ) . it displays long text of a PO header. since user can enter huge amount of long text i want to enable vertical scroll bar in smart form window so that it shows all the long text.
How to enable that for a window in smart form? any pointers would be highly appreciated.
Thanks,
Sreekanth.

Hi
Only the main window can have a dynamic heigh, all other windows have a static size: so u make sure the long text can be displayed in the window .
Max

How to get a scroll bar to the applications popup by default?

How to get a scroll bar to the applications popup by default when clicked the applications folder from the dock? If I have so many applications that they do not fit in the default area, I have to find out myselft that I have to scroll the content before the scroll bar appears. This leads to "where is my missing applications questions" by the novice users with Mountain Lion.

System Preferences > General > Show scroll bars.
Click the button by the side of "Always".
Best.

Vertical Scroller in ADF table

hi,
Can anyone tell me how to add vertical scroller/scrollbar for ADF table?
Thanks,
Senthil

Thanks for your replies.
(i) i tried setting scrollbar for IFrame, the scrollbar didn't appear. and in addition to that, the af:table doesn't come inside the frame. the frame comes separately below the actual table
my jsp code :
<afh:body >
<h:form>
<f:verbatim>
<iframe scrolling="yes">
<af:table>
</af:table>
</iframe>
</f:verbatim>
</h:form>
</afh:body>
(ii) With div tag, is it possible to get the vertical scroller alone. i am trying to get rid of the horizontal scrollbar. am exploring the options.

Remove vertical scroll bar from table control

hi,
i had used table control in my application. i want remove vertical scroll bar from table control.
At initial time in table control there is no vertical scroll bar. In my table control lines are dependent on internal table which i was used to fill it.
i was used these code for to set table control lines.
DESCRIBE TABLE IT_RISK_ZINRISEXC LINES EXC_LINE.
TC_RISK_EX-LINES = EXC_LINE .
Initially there is no data in internal table so there is no vertical scroll bar. After getting value i am filling internal table. and there is scroll bar in my table control. but i does not want that.
i was not selected RESIZING-VERTICAL OR -HORIZONTAL.

Hi,
From Scroll Bars in Table Control
You can remove the scroll bar in the table control by switching off horizontal and vertical scrolling in the properties of the table control. The properties can be accessed from the screen painter by double clicking on the table control. Regarding the page up and page down functions, I believe you add those buttons in the screen layout and code for them. You can use the standard function code for the page up and page down functions.
or
You can get rid of the vertical scroll bars by not setting table control lines. This way the user can only see the visible lines of the table control. As for the horizontal scrollbar, just make sure that your table control doesn't contain too many fields.
Regards,
Raj.

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

Issue in vertical scroolbar on the table control

Hi All,
I am not able to get the vertical scrollbar on the table control iuf line items increase in number. Please help me in solving the issue.
Thanks
K Sharma

Hi,
In se38
CONTROLS: TCTRL_PHONELIST TYPE TABLEVIEW USING SCREEN 100.
MODULE STATUS_0100 OUTPUT.
   DESCRIBE TABLE itab_PHONELIST LINES LIN.
TCTRL_PHONELIST-lines = LIN.
ENDMODULE.                 " STATUS_0100 OUTPUT
MODULE EXTRACT_USERDATA INPUT.
   lines = sy-loopc.
ENDMODULE.                 " EXTRACT_USERDATA INPUT
In se51
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
LOOP AT ITAB_PHONELIST .
              MODULE EXTRACT_USERDATA.
ENDLOOP.

How to get motion scroll in adobe muse?

I can't find motion scroll effect in Window Menu and properties bar. So how to get motion scroll in adobe muse. U have any idea?

Hi,
could you please add a screenshot of the windows tab so that we can see what is wrong?

Vertical Scroll Reload on Table Control

Hello,
I've created a couple table controls in ABAP for a custom transaction that is going to be run through the web portal. My problem is that the horizontal scroll on the table is handled on the front end, and the vertical scroll is handled in the program. This means that moving the vertical scroll bar is much slower and not as user friendly as the horizontal one when run on the web (where it has to hit the back end and refresh the screen every time it's moved). I don't think there is anything I can do about that, but on behalf of my customer I thought I'd check to see if anyone here knows any settings or any way to run vertical scrolling without hitting the abap code.
Thanks,
Nathan Beeler

You might also look at the<a href="http://help.sap.com/saphelp_webas630/helpdata/en/24/ef243a84da356be10000000a11402f/plain.htm">ITS Service Parameters</a>. I'm thinking of ~AUTOSCROLL.
Rob

Anyone know how to make vertical text in a table in keynote?

anyone know how to make vertical text in a table in keynote?

Just to add a bit more about this question. I have seen in other related questions that this feature (vertical text) is not available in (apparently) the whole iWork09. someone even said that it should be asked to the developers, so they include this feature in iWork10. I find this issue a bit sad. This feature has been present in msOffice since a while, and at least for me, this is quite important for my work. It is also apparently not possible to have different page orientation in the same document, meaning portrait and landscape, so one can have wide tables in a whole page, for example. If this is true, it is again sad, and I just cannot understand why such a basic feature is not available in an already 09 version. I am using only the trial version of iWork, but already in the first day I have discovered that I actually cannot do what I was used to. Again sadly I (and many others I guess) will have to stick to Office until the mac software is fully developed.

Does anybody know how to get a scroll bar for a long list of podcasts when selcting some for sync? Thanks

Does anybody know how to get a scroll bar for a long list of podcasts when selcting some for sync? Thanks

Hi lbadek
I can help with this please send us an email using the contact the mods link in my proifle and we will investigated from there.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

HT1212 ive changed my email on itunes and apple and att but my app store still shows my old id so it doesnt recognize me to add new apps...any clues how to get it changed on the phone

ive changed my email on itunes and apple and att but my app store still shows my old id so it doesnt recognize me to add new apps...any clues how to get it changed on the phone

Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account. You may have already done this.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to get vertical scrolling in the table

Similar Messages

Maybe you are looking for