How to give security to prevent using oracle forms "FORMS_DDL" In Database

How to prevent user to use FORMS_DDL in program or security in database to prevent this in Database level
Thanks in Advance.

user to use FORMS_DDLHuh? Your users write forms-modules? There is no way to "forbid" the use of FORMS_DDL. What about defining a rule for your developers that they are not allowed to do so. Then you could write a little JDAPI-program whichs "scans" new modules if FORMS_DDL is used.

Similar Messages

While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms

Hi,
Please advise on the below issue.
While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms.
May i know what is to be done?

MoNo wrote:
Hi Friends...
I'm using windows7 32 bit.
<snip>First, please be aware that oracle products are NOT certified to run on ANY 'home' edition of ANY version of Windows.
Second, did you read the instructions on the page where you downloaded the software -- specifically the part about unzipping TWO downloaded zip files into the SAME directory?
Third, did you read and heed the installation guide, or did you just go straight to 'setup.exe'?

How to start to use Oracle client to access Database ?

Folks,
Hello. I have just installed Oracle Client into directory /home/myOracle/Oracle_Client. But I don't know how to start and configure the client to access Oracle Database.
Can any folk tell me how to start to use Oracle client to access Database ?

user13764998 wrote:
I have earlier managed to install the Oracle Client (32-bit) in 32-bit clients and servers Oracle Client 10.
The reason that it went well before was the exellent setup and configurationprograms we got with that version.It seems you are confusing the "full" Datbase Client with Instant Client.
Now I'm trying to install the Oracle Instant Client 11g R2 both 32-bit and 64 (of the latest revision) on a 64-bit Windows 2008 Server .
I have managed to install the driver but the setup doesn't give me any Net Configuration Assistant or Net Manager to help with the configuration.What setup? Are you not using just the zip files?
What are you installing exactly, i.e. what install media (file) did you download?
So I haven't succeded in configuring it despite I I read the readme-info that comes with the Instant Client files.There's not much to configure - that's sort of the point of Instant Client. Just drop a few files in a folder, set PATH and off you go.
Doesn't <instant client dir>\sqlplus user@'hostname/servicename' work?

How to Unpivot, Crosstab, or Pivot using Oracle 9i with PL/SQL?

How to Unpivot, Crosstab, or Pivot using Oracle 9i with PL/SQL?
Here is a fictional sample layout of the data I have from My_Source_Query:
Customer | VIN | Year | Make | Odometer | ... followed by 350 more columns/fields
123 | 321XYZ | 2012 | Honda | 1900 |
123 | 432ABC | 2012 | Toyota | 2300 |
456 | 999PDQ | 2000 | Ford | 45586 |
876 | 888QWE | 2010 | Mercedes | 38332 |
... followed by up to 25 more rows of data from this query.
The exact number of records returned by My_Source_Query is unknown ahead of time, but should be less than 25 even under extreme situations.
Here is how I would like the data to be:
Column1 |Column2 |Column3 |Column4 |Column5 |
Customer | 123 | 123 | 456 | 876 |
VIN | 321XYZ | 432ABC | 999PDQ | 888QWE |
Year | 2012 | 2012 | 2000 | 2010 |
Make | Honda | Toyota | Ford | Mercedes|
Odometer | 1900 | 2300 | 45586 | 38332 |
... followed by 350 more rows with the names of the columns/fields from the My_Source_Query.
From reading and trying many, many, many of the posting on this topic I understand that the unknown number or rows in My_Source_Query can be a problem and have considered working with one row at a time until each row has been converted to a column.
If possible I'd like to find a way of doing this conversion from rows to columns using a query instead of scripts if that is possible. I am a novice at this so any help is welcome.
This is a repost. I originally posted this question to the wrong forum. Sorry about that.

The permission level that I have in the Oracle environment is 'read only'. This is also be the permission level of the users of the query I am trying to build.
As requested, here is the 'create' SQL to build a simple table that has the type of data I am working with.
My real select query will have more than 350 columns and the rows returned will be 25 rows of less, but for now I am prototyping with just seven columns that have the different data types noted in my sample data.
NOTE: This SQL has been written and tested in MS Access since I do not have permission to create and populate a table in the Oracle environment and ODBC connections are not allowed.
CREATE TABLE tbl_MyDataSource
(Customer char(50),
VIN char(50),
Year char(50),
Make char(50),
Odometer long,
InvDate date,
Amount currency)
Here is the 'insert into' to populate the tbl_MyDataSource table with four sample records.
INSERT INTO tbl_MyDataSource ( Customer, VIN, [Year], Make, Odometer, InvDate, Amount )
SELECT "123", "321XYZ", "2012", "Honda", "1900", "2/15/2012", "987";
INSERT INTO tbl_MyDataSource ( Customer, VIN, [Year], Make, Odometer, InvDate, Amount )
VALUES ("123", "432ABC", "2012", "Toyota", "2300", "1/10/2012", "6546");
INSERT INTO tbl_MyDataSource ( Customer, VIN, [Year], Make, Odometer, InvDate, Amount )
VALUES ("456", "999PDQ", "2000", "Ford", "45586", "4/25/2002", "456");
INSERT INTO tbl_MyDataSource ( Customer, VIN, [Year], Make, Odometer, InvDate, Amount )
VALUES ("876", "888QWE", "2010", "Mercedes", "38332", "10/13/2010", "15973");
Which should produce a table containing these columns with these values:
tbl_MyDataSource:
Customer     VIN     Year     Make     Odometer     InvDate          Amount
123 | 321XYZ | 2012 | Honda      | 1900          | 2/15/2012     | 987.00
123 | 432ABC | 2012 | Toyota | 2300 | 1/10/2012     | 6,546.00
456 | 999PDQ | 2000 | Ford     | 45586          | 4/25/2002     | 456.00
876 | 888QWE | 2010 | Mercedes | 38332          | 10/13/2010     | 15,973.00
The desired result is to use Oracle 9i to convert the columns into rows using sql without using any scripts if possible.
qsel_MyResults:
Column1          Column2          Column3          Column4          Column5
Customer | 123 | 123 | 456 | 876
VIN | 321XYZ | 432ABC | 999PDQ | 888QWE
Year | 2012 | 2012 | 2000 | 2010
Make | Honda | Toyota | Ford | Mercedes
Odometer | 1900 | 2300 | 45586 | 38332
InvDate | 2/15/2012 | 1/10/2012 | 4/25/2002 | 10/13/2010
Amount | 987.00 | 6,546.00 | 456.00 | 15,973.00
The syntax in SQL is something I am not yet sure of.
You said:
>
"Don't use the same name or alias for two different things. if you have a table called t, then don't use t as an alais for an in-line view. Pick a different name, like ordered_t, instead.">
but I'm not clear on which part of the SQL you are suggesting I change. The code I posted is something I pieced together from some of the other postings and is not something I full understand the syntax of.
Here is my latest (failed) attempt at this.
select *
from (select * from tbl_MyDataSource) t;
with data as
(select rownum rnum, t.* from (select * from t order by c1) ordered_t), -- changed 't' to 'ordered_t'
rows_to_have as
(select level rr from dual connect by level <= 7 -- number of columns in T
select rnum,
       max(decode(rr, 1, c1)),
       max(decode(rr, 2, c2)),
       max(decode(rr, 3, c3)),
       max(decode(rr, 4, c3)),
       max(decode(rr, 5, c3)),
       max(decode(rr, 6, c3)),
       max(decode(rr, 7, c3)),
from data, rows_to_have
group by rnumIn the above code the "select * from tbl_MyDataSource" is a place holder for my select query which runs without error and has these exact number of fields and data types as order shown in the tbl_MyDataSource above.
This code produces the error 'ORA-00936: missing expression'. The error appears to be starting with the 'with data as' line if I am reading my PL/Sql window correctly. Everything above that row runs without error.
Thank you for your great patients and for sharing your considerable depth of knowledge. Any help is gratefully welcomed.

Ques;How do you secure imail when used being used in iweb. People can mess

How do you secure imail when used being used in iweb? People can mess w/my settings in iweb imail window.

What is iMail?
And what is an iWeb iMail window?
iWeb is part of iLife 06 which is an application used to create websites hosted on .Mac.
Are you referring to Apple's Mail application and webmail access using a browser such as Safari to access your .Mac account?
Which people can mess with what settings? You shouldn't allow anyone else to access your Mac when logged in to your account and home folder/directory. OS X was designed for multiple users of the same Mac with each regular user having their own computer login account (with or without admin privileges) and associated home folder/directory to store and access their data and settings for their login account only.

How to give network path while creating oracle directory.

I have created
CREATE OR REPLACE DIRECTORY TESTDIR AS '\\168.176.33.117\TESTDIR';
but through this path i m not able to create text file.
create or replace procedure WriteTest is
f utl_file.file_type;
s varchar2(200) := 'this is some info';
begin
f := utl_file.fopen('TEST2DIR','sample2.txt','W');
utl_file.put_line(f,s);
utl_file.fclose(f);
end WriteTest;
Help how to give network path while creating oracle directory.
--when i give local machine path then it will create at local machine where oracle is installed. but not able to create at other machine.
Zakir

Well for starters your directory object is called TESTDIR and in your fopen statement you are referring to TEST2DIR.
On top of that I'm not sure oracle is happy to refer to network locations. I think you have to map it to a regular drive mapping (shared directory) type path. Can't say I've every tried to do it though.

How to connect from java without using oracle client installation

hi ,
Please tell me how to connect from java without using oracle client
Thanks & Regars

http://www.orafaq.com/wiki/JDBC#Thin_driver

How to provide security settings for the adobe form using livecycleDesigner

Hello,
I am very new to form designing,
can any one please tell me how to provide security settings for the adobe forms at client side?
Regards,
Menaka

Hi,
that is a good topic for the ADFS forum.
ADFS forum - http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
But you could pass the user-agent as incoming claim type Client User agent. User-agents can be manipulated, so if that is an issue you can look into Device Registration and the Device OS type from there. That is also a incoming claim but requires DRS and
DRS is not available for all plattforms.
Hth,
Lutz

How use oracle forms with oracle database in a local computer network(client -server homogenious network)

Hello experts,
                     I am new in Oracle forms.I am using oracle forms 11g with weblogic server 10.3.5 and oracle database 11g at windows 7 platform.
I want to call my oracle forms(main login form) from different computers(windows7) connected in a local network.My oracle database is installed in a server computer.I am not talking about oracle forms hosting in internet.I want to deploy oracle forms in a local computer network connected via LAN cable or wi-fi.
thank You.
regards
aaditya

In most cases you can copy the same entry found in the tnsnames.ora file used by the database. In the database home, the file can be found in \network\admin. Open the file and you should find something like this:
yourAlias =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.100)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = orcl)
So in the above, you would need to set the alias (this can be anything you like), the IP address or hostname of the machine where the database is running, the port number used by the db listener, and the service name used by the db. Most of this will already be set for you if you are copying from the database tnsnames.ora. So you should be able to just copy and paste. More information about the tnsnames.ora file can be found in the db documentation:
http://docs.oracle.com/cd/B28359_01/network.111/b28317/tnsnames.htm

How to create dynamic 'rack drawings' with Oracle forms

Hallo, I work for a telecom company.
We have used Oracle Forms and Reports from the beginning and we are now on version 10.2 but upgrading til 11.2.
I got a request to make 'dynamic rack drawings' to display what equipment are located in what racks.
The suggestion is to calculate coordinates(position, height) and send it to our GIS-system to do the dynamic drawing bit.
The 'drawing' is just simple boxes with various height with a name in it to mark different types of equipment.
So my question is... How should we draw these boxes dynamically to display our racks including the equipment installed there?
Something like this With a header and a footer.
1          XXXXXX-12                         1
2                                                  2
3         yyyyyy-32                          3
4                                                  4
5           zzzz-11                           5
6                                                  6
40                                               40

I wouldn't do the drawing part in Forms. Luckily there are Java Beans available in Webforms which you could use to visualize your data in a more complex way.
For more informations on Java Beans and how they are used in Forms google gives you a good impression
https://www.google.at/search?q=oracle+forms+java+bean
or if you are stuck don't hesitate to ask
cheers

How to Call a jasper report from Oracle Forms 6i.

Hi
Can anybody tel me how to Call a jasper report from ORacle Forms 6i.
Thanks & Regards
Bango

Forms 6i client/server? Use the HOST command to call the report. Since a Jasper report is just a call to a url, it will be something like:
v_url := '<your url to the report>';
host ('cmd /c start '||v_url);If it's web Forms 6i it even easier. Just use web.show_document(<url>).

Using Oracle Forms Importing Data From SQL Server into Oracle Tables.

Dear All,
We are using Oracle Forms 10g in windows XP and having OAS 10g and Oracle database 9i.
How can we import data from SQL Server 2005 into Oracle tables using Oracle Forms?
Thanks & Regards
Eidy

I have no idea what "Oracle Hetrogenius Services" is, so I can't help you with that, sorry.
SQL Developer might also assist you. SQL Developer can connect to SQL Server as well as Oracle and has some tools for migration. See the documentation for details:
http://download.oracle.com/docs/cd/E12151_01/doc.150/e12156/toc.htm
For additional help on using SQL Developer for this task, please consult Support or the SQL Developer forum: SQL Developer
Hope this helps,
Jacob

Does it exist a manual for learning to use Oracle Forms?

What I'm looking for is a manual or tutorial for using Oracle Forms.
Looking at Oracle Documentation link http://www.oracle.com/technetwork/developer-tools/forms/documentation/10g-forms-091309.html I haven't found an user or developer guide.
On the web I've found something like this https://sites.google.com/site/craigsoraclestuff/oracle-forms---how-to-s but I'd like to know whether it exists something official by Oracle explaining like creating a form and things like that.
Thanks in advance!

If you want Oracle official material for learning any product, you will need to refer to Oracle University:
http://education.oracle.com/pls/web_prod-plq-dad/ou_product_category.getFamilyPage?p_family_id=33
That said, in most cases, whether you have a "Where do I find..." or "How to...." question, your answers are most often one search away. For example, a simple search in this Forum and you will find that your question has been asked and answered countless times:
https://forums.oracle.com/forums/search.jspa?q=learn+and+forms&objID=f82&dateRange=lastyear&rankBy=10001
Other search engines will offer similar third party solutions. Try google.com, yahoo.com, ask.com, and countless others.

How to implement the spell check in oracle forms 10g or 6i...

How to implement the spell check in oracle forms.
Is there any different method is there.
Please help me....
Praveen.K

Here is one different from Jspell..
In 6i client/server you can call MS Word spell checker using OLE. Below sample code for 6i.
For 10g you will need webutil to use same code. install webutil and just replace "OLE2." with "CLIENT_OLE2."
PROCEDURE spell_check (item_name IN VARCHAR2)
IS
   my_application   ole2.obj_type;
   my_documents     ole2.obj_type;
   my_document      ole2.obj_type;
   my_selection     ole2.obj_type;
   get_spell        ole2.obj_type;
   my_spell         ole2.obj_type;
   args             ole2.list_type;
   spell_checked    VARCHAR2 (4000);
   orig_text        VARCHAR2 (4000);
BEGIN
   orig_text := NAME_IN (item_name);
   my_application := ole2.create_obj ('WORD.APPLICATION');
   ole2.set_property (my_application, 'VISIBLE', FALSE);
   my_documents := ole2.get_obj_property (my_application, 'DOCUMENTS');
   my_document := ole2.invoke_obj (my_documents, 'ADD');
   my_selection := ole2.get_obj_property (my_application, 'SELECTION');
   ole2.set_property (my_selection, 'TEXT', orig_text);
   get_spell :=ole2.get_obj_property (my_application, 'ACTIVEDOCUMENT');
   ole2.invoke (get_spell, 'CHECKSPELLING');
   ole2.invoke (my_selection, 'WholeStory');
   ole2.invoke (my_selection, 'Copy');
   spell_checked := ole2.get_char_property (my_selection, 'TEXT');
   spell_checked :=SUBSTR (REPLACE (spell_checked, CHR (13), CHR (10)),1,LENGTH (spell_checked));
   COPY (spell_checked, item_name);
   args := ole2.create_arglist;
   ole2.add_arg (args, 0);
   ole2.invoke (my_document, 'CLOSE', args);
   ole2.destroy_arglist (args);
   ole2.RELEASE_OBJ (my_selection);
   ole2.RELEASE_OBJ (get_spell);
   ole2.RELEASE_OBJ (my_document);
   ole2.RELEASE_OBJ (my_documents);
   ole2.invoke (my_application, 'QUIT');
   ole2.RELEASE_OBJ (my_application);
END;Call it like this: SPELL_CHECK ('BLOCK.MY_TEXT_ITEM' );

Problem about using Oracle Form 6i to connect Oracle Database 10g express.

Sorry to interrupt all of you.
I have encountered a problem about using Oracle Form 6i to connect Oracle Database 10g express.
As I would like to
I use Oracle Net8 Easy Config to create a connection.
According to "tnsnames.ora", the paramater of connection is as follows;
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA = (SID = XE))
Unfortunately, when I use Oracle Net8 Easy Config to test the connection, an error message is prompted as follows:
Connecting....
The test did not succeed.
ORA-03106: fatal two-task communication protocol error
There may be an error in the fields entered
or the server may not be ready for a connection.
You can check the server and retry, or continue.
After I google it, I still have no idea how to solve the problem. I would like to ask, could anyone mind providing some hints or solution to address the issues.
Thanks for your assistance in advance.

I don't believe the Net8 Easy Config (NEC) will create a compatible entry in the tnsnames.ora. I have Forms 6i running successfully against a 10g Express database, but I did not use the NEC - I created the entry myself. Here is the entry I use:
XE=
(DESCRIPTION=
    (ADDRESS=
      (PROTOCOL=TCP)
      (HOST=<<servername or IP address>>)
      (PORT=1521)
    (CONNECT_DATA=
      (SERVER=dedicated)
      (SERVICE_NAME=XE)
)Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to give security to prevent using oracle forms "FORMS_DDL" In Database

Similar Messages

Maybe you are looking for